Scribd
Upload
210 views3 pages

P.No. Group N AWS No. Class Filler No (F. No.) A. No. Si No. Material Grade Filler Metal SFA No

The document provides specifications for welding P91 and P22 materials, including filler metal types, preheat and post weld heat treatment temperatures, gas and electrical characteristics for welding, and guidelines for heating and cooling rates.

Uploaded by

Sitaram Jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
210 views3 pages

P.No. Group N AWS No. Class Filler No (F. No.) A. No. Si No. Material Grade Filler Metal SFA No

The document provides specifications for welding P91 and P22 materials, including filler metal types, preheat and post weld heat treatment temperatures, gas and electrical characteristics for welding, and guidelines for heating and cooling rates.

Uploaded by

Sitaram Jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

All

Material
Si Grade Filler Metal SFA AWS No. Class A. No.
No. P.No. Group N No Filler No(F. No.)
GTAW SMAW GTAW SMAW GTAW SMAW GTAW
15E 1 SA 335 Gr.P91 E9015 B9&
5.28 5.5 ER 90S B9 6 4 5
E 9018 B9
1 C Mn P S Si Ni Cr Mo
Material comp.
.08-.12 .30-.60 .02 max .01 max .20-.50 .4 max 8.0-9.5 .85-1.05
Note : After the welding completion of welding, insulate the welding and cool it at 80-100 deg.cent.and
for thickness less than 50 mm and 2 hrs.for thickness grater than 50 mm and conduct PWHT immediately.

All
Material AWS No. Class A. No.
Si Grade Filler Metal SFA
No. P.No. Group N No Filler No(F. No.)
GTAW SMAW GTAW SMAW GTAW SMAW GTAW
5A 1 SA 335 Gr.P22
5.28 5.5 ER 90S B3 E9015 B3& 6 4 4
E 9018 B3
1 C Mn P S Si Ni Cr Mo
Material comp.
0.05-0.15 .30-.60 .025 max .025 max 0.50 max Nill 1.90-2.60 .87-1.13
Note : After the welding completion of welding, insulate the welding and cool it at 80-100 deg.cent.and
for thickness less than 50 mm and 2 hrs.for thickness grater than 50 mm and conduct PWHT immediately.
All Specification Of P-91 Material
Preheat Interpass Post Heat
A. No. Temp. Temp. Temp. Gas Electrical charactristics

SMAW Argon Mixure Flow Rate Current AC,DC


Max.250-
min.220 760 ±10 Shielding 99.99 8-14 LPM
5 350 Polarity
Backing 99.99 10-20 LPM
V Amps (range)
.18-.025 Voltage (Range)
l it at 80-100 deg.cent.and ceep the job dry.maintain the 80-100 deg.cent.for 1 hrs Tunguston electrode
ct PWHT immediately. Size and type

All Specification Of P-22 Material

A. No. Preheat Interpass Post Heat Gas Electrical charactristics


Temp. Temp. Temp.

SMAW Argon Mixure Flow Rate Current AC,DC


690⁰C to
min.200 Max.350 Shielding 99.99 10-15LPM
4 720⁰C Polarity
Backing Nill Nill
V Amps (range)
Nill Voltage (Range)
l it at 80-100 deg.cent.and ceep the job dry.maintain the 80-100 deg.cent.for 1 hrs Tunguston electrode
ct PWHT immediately. Size and type
lectrical charactristics Shocking time Heating & cooling rate

DC 1 Hrs for T< 19 mm 0-25 mm T, 220©max


DCEN For GTAAW 2 Hrs for T, 19 to 50 mm 25 -50 mm T,110©max
DCEP For SMAW 4 hrs for T, 50 to 75 mm 50-75 mm T, 75©max
60 to180 6 Hrs for T,75 to 100 mm Above 75 mm T , 55©max
10 to 30 Plus 1 Hrs for each
2.4 mm additional 1 inch over
2%thoriated 4 inch thickness

lectrical charactristics Shocking time Heating & cooling rate

DC 1 Hrs for T< 19 mm 0-25 mm T, 220©max


DCEN For GTAAW 2 Hrs for T, 19 to 50 mm 25 -50 mm T,110©max
DCEP For SMAW 4 hrs for T, 50 to 75 mm 50-75 mm T, 75©max
100 to180 6 Hrs for T,75 to 100 mm Above 75 mm T , 55©max
10 to 30 Plus 1 Hrs for each
2.4 mm additional 1 inch over
2%thoriated 4 inch thickness

You might also like