Scribd
Upload
145 views1 page

PV1100 Plus CE CERTIFICATE

This certificate documents compliance for several solar inverter models from Shenzhen Must Energy Technology Co., Ltd. It was issued on March 23, 2017 and expires on March 22, 2022. The certificate states that testing was performed and the inverters were verified to comply with relevant European standards for machinery, low voltage, and electromagnetic compatibility. Ente Certificazione Macchine certified that the inverters satisfy the requirements for affixing the ECM Certification Mark in reference to the listed standards.

Uploaded by

Renner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
145 views1 page

PV1100 Plus CE CERTIFICATE

This certificate documents compliance for several solar inverter models from Shenzhen Must Energy Technology Co., Ltd. It was issued on March 23, 2017 and expires on March 22, 2022. The certificate states that testing was performed and the inverters were verified to comply with relevant European standards for machinery, low voltage, and electromagnetic compatibility. Ente Certificazione Macchine certified that the inverters satisfy the requirements for affixing the ECM Certification Mark in reference to the listed standards.

Uploaded by

Renner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Certificate – Cертификат – 證明書 – Certificat – 증명서 – ‫شهادة‬

Certificate of Compliance
No. 0S170323.SME0W63
Test Reports No.0117020505I1, 0117020505I2

Certificate’s SHENZHEN MUST ENERGY


Holder: TECHNOLOGY CO., LTD.
4-5F, Building A11, Yusheng Industrial Park, No. 467,
Section XiXiang, National Highway 107, XiXiang,
Baoan District, Shenzhen, China

Certification ECM
Mark: European Type
Conformity Approved

Product: SOLAR INVERTER


Model(s): PV11-1200 Plus, PV11-1400 Plus,
PV11-1800 Plus, PV11-2400 Plus

Verification to: Standard:


EN 61000-6-4:2007+A1:2011,
EN 61000-6-2:2005, EN 61000-3-2:2014,
EN 61000-3-3:2013, EN 62109-1:2010

related to CE Directive(s):
2006/42/EC (Machinery)
2014/35/EU (Low Voltage)
2014/30/EU (Electromagnetic Compatibility)

Remark: The product(s) has been verified on a voluntary basis. The product(s) satisfies the requirements of
the Certification Mark of ECM, in reference to the above listed Standard(s). The above Compliance Mark
can be affixed on the product(s) accordingly to the ECM regulation about its release and its use. The
regulation can be found at www.entecerma.it. This Certificate of Compliance can be checked for validity
at www.entecerma.it
This verification doesn’t imply assessment of the production of the product(s).
Additional information, clarification about the Marking:
We attest that a TCF for the Marking process is in place. Whereas the
Manufacturer is Responsible to start the Marking Certification Procedure and to
perform all the necessary activities, as required by the Directive before placing the
Mark on the product(s).

Date of issue 23 March 2017 Expiry date 22 March 2022

Chief Manager Deputy Manager


Marco Morina Amanda Payne

Ente Certificazione Macchine Srl


Via Ca’ Bella, 243 – Loc. Castello di Serravalle – 40053 Valsamoggia (BO) - ITALY
 +39 051 6705141  +39 051 6705156  [email protected]  www.entecerma.it

You might also like