Scribd
Upload
870 views1 page

Design of Staircase - 10182021

The document provides design details and computations for a staircase, including: - A plan view and section view showing the staircase layout with 16 steps and dimensions. - Computations to determine the number of steps, riser height, and tread width based on the given rise and run. These were determined to be 16 steps with a 18.8cm riser and 0.3m tread width. - Reinforcement details showing the placement of rebar in the stairs.

Uploaded by

Bry Ramos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
870 views1 page

Design of Staircase - 10182021

The document provides design details and computations for a staircase, including: - A plan view and section view showing the staircase layout with 16 steps and dimensions. - Computations to determine the number of steps, riser height, and tread width based on the given rise and run. These were determined to be 16 steps with a 18.8cm riser and 0.3m tread width. - Reinforcement details showing the placement of rebar in the stairs.

Uploaded by

Bry Ramos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DESIGN OF STAIRCASE

by Engr. RC Malasan

3000
1100 300

1000
up
7 6 5 4 3 2 1
8
9 10 11 12 13 14 15 16

1000
12 mm Ø TOP BARS

10 mm Ø TIES AT 0.25 M.O.C.

PLAN
12 mm Ø TOP BARS AT 0.25 M.O.C.

1100 Run = 1900


10 mm Ø BOTTOM BARS AT 0.25 M.O.C.
300

TOP OF ROOF BEAM


188

STAINLESS
2900

STEEL RAILINGS

STEP DETAIL
SECOND FLOOR LINE
Rise = 3000

LANDING
1500

DETAIL OF STAIRS
188

FINISH FLOOR LINE NOT TO SCALE


300

NATURAL GROUND LINE


SECTION

Computation: (Refer to book of Max B. Fajardo Jr., Simplified Construction Estimate, 3rd Edition,
Chapter 9, page 291-308)

Number of Steps = Rise/minimum riser


= 1.50m/0.17m (assumed riser is between 17-19cm, 20cm is for special consideration)
= 8.82 steps ( used whole number, 8 steps, (oro, plata, mata consideration))

Height of Riser = 1.50/8


= 0.188m or 18.80cm (ok, between 17-19cm)

Effective width of tread


= Run/(# of Steps-1)
= (3.00-1.1)/(8-1)
= 0.271m

Width of Tread = Effective width of Tread + Nosing (2 to 5cm)


= 0.271+0.029
= 0.30m

USE: 16 steps, 18.80cm riser & 0.30m tread width

You might also like