Scribd
Upload
18 views

Aisc Edition Member Dimensions and Properties Viewer: W, S, M, HP Shapes Y

The document provides definitions and properties for structural steel shapes according to the AISC steel manual. It lists various dimensional properties, design values, and section properties for standard steel sections including W-shapes, channels, angles, and pipes.

Uploaded by

Americo Flores Bustamante
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
18 views

Aisc Edition Member Dimensions and Properties Viewer: W, S, M, HP Shapes Y

The document provides definitions and properties for structural steel shapes according to the AISC steel manual. It lists various dimensional properties, design values, and section properties for standard steel sections including W-shapes, channels, angles, and pipes.

Uploaded by

Americo Flores Bustamante
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

ISC 13th EDITION MEMBER DIMENSIONS AND PROPERTIES VIEWER

W, S, M, HP Shapes

Y
k1=0.5625
k tf=0.315

d=8.11 T X

tw=0.245

bf=4.01

W8X15
A= 4.44 in.^2
d= 8.11 in.
tw = 0.245 in.
bf = 4.01 in.
tf = 0.315 in.
k(des) = 0.615 in.
k(det) = 0.8125 in.
k1 = 0.5625 in.
T= 6.5 in.
gage = 2.25 in.
wt./ft. = 15 plf.
bf/(2*tf) 6.37
h/tw = 28.1
Ix = 48 in.^4
Sx = 11.8 in.^3
rx = 3.29 in.
Zx = 13.6 in.^3
Iy = 3.41 in.^4
Sy = 1.7 in.^3
ry = 0.876 in.
Zy = 2.67 in.^3
rts = 1.06 in.
ho = 7.8 in.
J= 0.137 in.^4
Cw = 51.8 in.^6
a= 31.29 in.
Wno = 7.81 in.^2
Sw = 2.47 in.^4
Qf = 2.31 in.^3
Qw = 6.64 in.^3
NOMENCLATURE FOR AISC VERSION 13.0 MEMB

A= Cross-sectional area of member (in.^2)


d= Depth of member, parallel to Y-axis (in.)
h= Depth of member, parallel to Y-axis (in.)
tw = Thickness of web of member (in.)
bf = Width of flange of member, parallel to X-axis
b= Width of member, parallel to X-axis (in.)
tf = Thickness of flange of member (in.)
k= Distance from outer face of flange to web toe of
k1 = Distance from web centerline to flange toe of fi
T= Distance between fillets for wide-flange or c
gage = Standard gage (bolt spacing) for member (in.)
Ix = Moment of inertia of member taken about X-ax
Sx = Elastic section modulus of member taken abo
rx = Radius of gyration of member taken about X-axis (in.) = SQRT(I
Iy = Moment of inertia of member taken about Y-ax
Sy = Elastic section modulus of member taken abo
ry = Radius of gyration of member taken about Y-axis (in.) = SQRT(I
Zx = Plastic section modulus of member taken abo
Zy = Plastic section modulus of member taken abo
rts = SQRT(SQRT(Iy*Cw)/Sx
xp = horizontal distance from designated member ed
yp = vertical distance from designated member edge
ho = Distance between centroid of flanges, d-t
J= Torsional moment of inertia of member (in.^4
Cw = Warping constant (in.^6)
C= Torsional constant for HSS shapes (in.^3)
a= Torsional property, a = SQRT(E*C
E= Modulus of elasticity of steel = 29,000 ksi
G= Shear modulus of elasticity of steel = 11,200
Wno = Normalized warping function at a point at the
Sw = Warping statical moment at a point on the cro
Qf = Statical moment for a point in the flange dire
Qw = Statical moment at the mid-depth of the secti
x(bar) = Distance from outside face of web of channel
y(bar) = Distance from outside face of outside face of
eo = Horizontal distance from the outer edge of a channel web to its shear center (in.) = (approx.) t
xo = x-coordinate of shear center with respect to th
yo = y-coordinate of shear center with respect to th
ro(bar) = Polar radius of gyration about the shear center = SQRT(x
H= Flexural constant, H = 1-(x
LLBB = Long legs back-to-back for double angles
SLBB = Short legs back-to-back for double angles
h(flat) = The workable flat (straight) dimension along t
b(flat) = The workable flat (straight) dimension along t
A(surf) = The total surface area of a rectangular or squ
STD = Standard weight (Schedule 40) pipe section
XS = Extra strong (Schedule 80) pipe section
XXS = Double-extra strong pipe section

You might also like