Verint S1712e Compact,

12-Port Video Encoder

Cost-Effective Video Encoder for Up to 12 Cameras

Verint S1712e Feature Set

The Verint S1712e is a 12-port video encoder that combines low cost
of ownership with a compact, efficient design. The Verint S1712e
accommodates 12 video streams in a 1U, 6-inch (15-cm) deep enclosure.
Ideal for large installations, the S1712e delivers dual stream, MPEG-4
SP or SM4 video up to 4CIF/15 frames per second or 2CIF/30 frames per
second. Dual streaming enables video to be viewed at high resolution for
excellent image clarity, but stored at lower resolution, optimizing use of
storage resources.
The S1712e video server incorporates Verint’s industry-leading video Key Benefits
encoding technology for superior imagery and optimal bandwidth
utilization. A noise reduction filter further reduces bandwidth use, while
• 1
 2-port video encoder with dual-stream, MPEG-
enhancing image clarity. Automated camera tampering detection rapidly 4 SP video up to 4CIF/15fps or 2CIF/30fps
determines when cameras are out of focus, to help ensure that critical
• C
 ompact 1U form factor
images are available and reduce the need to physically examine each
• E
 xternal power supply and low power
camera on site.
consumption for a highly efficient, energy-saving
SSL-based authentication helps prevent unauthorized access. An RS-232
solution
serial port is provided for integration with access control systems, and an
• Automatic camera tampering detection
RS-422/485 serial port supports motorized domes and cameras.
• O
 ptions include 1 bi-directional audio channel or
12 uni-directional audio ports
Energy Efficient, Longer Life, Lower Cost of Ownership
The Verint S1712e features an external power supply, virtually  onfigure and manage using Verint VMS or
• C
other software management applications
eliminating the need to replace functional encoders because of faulty
internal power units. Verint S1712e power consumption is just 20W, so
it uses far less power than competitive products. This makes the S1712e
a highly efficient, energy-saving choice. And the S1712e can be managed
using Verint Enterprise Video Management Software (VMS) or third-party
video management software, enabling organizations to deploy the video
management solutions that best address their budgets and objectives.

Easy to Install, Less Costly to Service

The Verint S1712e video server is built for easy installation and operation
in virtually any type of video system. These rack-mountable encoders can
be placed in an IT closet with other network equipment, plugged into the
Ethernet network, and configured individually using Verint’s Windows-
based SConfigurator software or in batches using Verint Enterprise VMS
Control Center.
 Verint S1712e Encoder

TECHNICAL SPECIFICATIONS
VIDEO
• Input 12 composites, 1 Vpp into 75 ohms NTSC/PAL
• Dual Stream 4CIF/7.5fps and CIF/30fps programmable
• Connector BNC female
• Compression MPEG-4 SP, SM4
• Resolution Scalable from 352x240 to 704x480 pixels NTSC and 352x288 to 704x576 pixels PAL
• Frame Rate 12 x 1-30fps NTSC, 1-25fps PAL programmable (full motion)
• Bandwidth Each stream configurable from 30Kbps to 6Mbps
NETWORK
• Interface Ethernet 10/100Base-T
• Connector RJ-45 jack
Transport: RTP/IP, UDP/IP, TCP/IP, or multicast IP
• Protocols
Others: DNS, NTP, HTTP, FTP, and DHCP client
• Security SSL-based authentication
SERIAL PORT
Port 1: RS-232 (max. 230 kbps)
• Electrical Levels
Port 2: RS-422/485 2/4 wires (max. 230 kbps)
Port 1: DB-9 female (DCE)
• Connectors
Port 2: pluggable screw-terminal strip
• Operating Mode Transparent serial port supporting any asynchronous serial protocol
ALARM
• Inputs/Output 12 inputs / 2 relay output
AUDIO
Input: -46 to -3 dBV into 30 kohms (line or microphone)
• Bi-Directional Audio (optional) Output: -46 to -3 dBV into 8 ohms min.
Connectors: One set of 1/8 in. (3.5 mm) input and output; Stereo jacks
Input: 12 ports; -46 to -3 dBV into 30 kohms (line or microphone)
• Uni-Directional Audio (optional) Programmable bias: 0-9V DC; 16-bit resolution; 8, 16, or 24 KHz sampling rate
Connectors: 1 set of 1/8 in. (3.5 mm) input stereo jacks
MANAGEMENT
Remote: Verint, SConfigurator
• Configuration
Local: via the serial port using any ASCII terminal
Flash memory for upgrade of firmware over the network; remote batch upgrade available through Verint Enterprise
• Firmware Upgrade
VMS Control Center and SConfigurator
POWER
• Supply/Voltage 12V DC +/- 10% (20W)
PHYSICAL
• Enclosure Metal case with flange mount (black)
• Dimensions 17L x 6.1W x 1.7H in. (431.8L x 154.9W x 43.2H mm)
• Weight 5.3 lbs (2.4 kg)
• Environmental 32ºF to 122ºF (0ºC to 50ºC)
• Humidity 95% non-condensing at 122ºF (50ºC)

World-Class Service and Support

At Verint, we are dedicated to the success of our partners and customers. To this end, we’ve developed world-class
customer support programs and service offerings. Staffed by Verint experts in all facets of networked video deployment and
use, Verint’s Customer Support Program features live technical support, web-based resources, advanced replacements and
a host of on-site professional services.

Verint. Powering Actionable Intelligence®

Verint® Systems Inc. (NASDAQ: VRNT) is a global leader in Actionable Intelligence® solutions for customer engagement optimization, security intelligence, and fraud, risk and compliance.
Today, more than 10,000 organizations in over 180 countries use Verint solutions to improve enterprise performance and make the world a safer place. Learn more at www.verint.com.

Americas Europe, Middle East & Africa Asia Pacific

[email protected] [email protected] [email protected]

1-800-4VERINT +44(0) 1932 839500 +(852) 2797 5678

verint.com twitter.com/verint facebook.com/verint blog.verint.com

Unauthorized use, duplication, or modification of this document in whole or in part without the written consent of Verint Systems Inc. is strictly prohibited. By providing this document, Verint Systems Inc. is not
making any representations regarding the correctness or completeness of its contents and reserves the right to alter this document at any time without notice. Features listed in this document are subject to
change. Not all functionality is available in all configurations. Please contact Verint for current product features and specifications. All marks referenced herein with the ® or TM symbol are registered trademarks or
trademarks of Verint Systems Inc. or its subsidiaries. All rights reserved. All other marks are trademarks of their respective owners. © 2015 Verint Systems Inc. All Rights Reserved Worldwide. 06.2015