IECEx BAS 09.0059 004
IECEx BAS 09.0059 004
of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification System for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
Optional accessory:
Signature:
(for printed version)
Date:
Additional
manufacturing
locations:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in IECEx Scheme
Rules, IECEx 02 and Operational Documents as amended
STANDARDS :
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards
IEC 60079-1:2007-04 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
Edition:6
IEC 60079-31:2008 Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
Edition:1
This Certificate does not indicate compliance with safety and performance requirements
other than those expressly included in the Standards listed above.
Test Reports:
GB/BAS/ExTR09.0082/00 GB/BAS/ExTR15.0176/00
EQUIPMENT:
Equipment and systems covered by this Certificate are as follows:
The Type SM87 Beacons comprise a cylindrical enclosure on a square base and a cover provided with a glass dome to component enclosure
IECEx BAS 09.0154U.
The base and cover may be manufactured from either aluminium or stainless steel and the cover is secured by screws of grade A4-80
stainless steel. The base is provided with up to four threaded cable entries. The enclosures may be joined together by the manufacturer’s
supplied coupling up to a maximum of 5 enclosures.
This issue permits existing information (for example on Schedule Drawings) to be replaced by the revised certificate holders name. No other
changes may be made to the certified design
Annex:
Product Description
The Type SM87 Beacons comprise a cylindrical enclosure on a square base and a cover provided with a glass dome to component
enclosure IECEx BAS 09.0154U.
The base and cover may be manufactured from either aluminium or stainless steel and the cover is secured by screws of grade A4-
80 stainless steel. The base is provided with up to four threaded cable entries. The enclosures may be joined together by the
manufacturer’s supplied coupling up to a maximum of 5 enclosures.
A filament lamp and terminals to form a Type SM87 LU3 rated up to 240V a.c., 10W, 25W or 40W.
A fluorescent lamp, a PCB and terminals to form a Type SM87 LU1 rated up to 254V a.c. or 48 V d.c., 5W or 10W.
A Xenon Lamp, a PCB and terminals to form a Type SM87 HXB rated up to 254V a.c. or 48V d.c.,11W.
A Xenon electronics unit PCB and terminals to form a Type SM87 XBT/A rated up to 254V a.c. or 48V d.c, 11W. This unit is to
drive the XTB/B unit described below.
A Xenon Lamp PCB and terminals to form a Type SM87 XBT/B powered from the unit above.
Four PCBs containing clusters of LEDs, a driver PCB and terminals to form a Type SM87 LED rated up to 48V d.c. 7.2W white and
blue, 4W red, green and amber.
The temperature classification and ambient temperature range for the beacons fitted with the specified lamps are indicated below.