EQUI-PUMP SA DE CV

EQUI-PUMP SA DE CV
December 1, 2021
Proposal No: CS21-12-01 01
Item No: ITEM 001 (Base Offer)

MODEL: 3196 MTi SIZE: 3x4-10H/6V QTY: 1

Operating Conditions
SERVICE
LIQUID AGUA FRIA , Rated Temp. 30.0 deg C, SP.GR 1.000,
Viscosity 1.000 cp, Rated/Max. suction pressure 0.0 / 0.0 psi
g
CAPACITY Rated 528.0 gpm
HEAD 72.0 (ft)

Performance at 1750 RPM per HI 14.6 1B basis power

PUBLISHED EFFY 75.0% (CDS)
RATED EFFY 74.0% with contract seal
RATED POWER 13.2 hp (incl. Mech. seal drag 0.22). (Run out 14.8 hp)
NPSHR 7.1 ft
DISCH PRESSURE (R) 31.8 psi g (36.9 psi g @ Shut off) based on 0.0 psi g rated
suction pressure
PERF. CURVE 2929-7 (Rotation CW viewed from coupling end)
SHUT OFF HEAD 85.2 ft
MIN. FLOW Continuous Stable: 135.7 gpm Hydraulic: 135.7 gpm
Thermal: N/A

Materials
CONSTRUCTION Ductile iron
CASING Ductile iron (max.casing pressure @ rated temperature 250.0 psi g)
ST.BOX COVER Ductile iron
IMPELLER Ductile iron - Open (9.2500 in rated, max=10.0000 in, min=6.0000 in)
CASING GASKETS Aramid Fiber with EPDM and Silicate Filler
IMPELLER O-RING Teflon
SHAFT MATERIAL SAE 4140
SHAFT SLEEVE 316SS
LUBRICATION Flood oil
SEAL CHAMBER Standard non cooled
GLAND 316SS Flush quench and drain
BEARINGS 6309 (Inboard) / 3309 (Outboard)
COUPLING T.B. Wood's - Duraflex- WES-4-S.F. 1.00
COUPLING GUARD Carbon steel
BASEPLATE Fabricated steel to ANSI B73.1M 1991 D07091A

Sealing Method
John Crane 5611Q X(1)F(50)1XO(58)1 (Carbon vs Silicon Carbide with Viton) - (Cartridge -
MECHANICAL SEAL Single)

Page 1
Proposal No: CS21-12-01 01 Item No: ITEM 001 (Base Offer) MODEL: 3196 MTi 3x4-10H/6V

Flanges
150# flat face

Frame Connections
Bearing frame drain
Frame cooler access
Oil fill connection

Frame Features
Ductile iron frame adapter
Inpro VBXX-D Hybrid Bearing Isolators
Iron bearing frame
Premium Severe Duty Thrust Bearings

Assembly and Testing

Casing & Cover - Standard hydro test
Impeller balanced to ISO G6.3

Piping
CPI Plan 7311 316SS tubing with 0.035in wall thickness and Parker Hannifin fittings
Painting
Goulds Blue standard painting

Warranty
5 Year Extended Warranty (All the components, manufactured by ITT Goulds pumps, in the liquid end and power end are
covered).

Driver : Electric motor Manufacturer : Nidec

FURNISHED BY Pump Mfg MOUNTED BY Pump Mfg
RATING 15.0 hp (11.2 KW) ENCLOSURE TEFC - Premium Efficiency
PHASE/FREQ/VOLTS 3/60 Hz/460 SPEED 1800 RPM
INSULATION/SF F/1.15 FRAME 254T

Weights and Measurements

TOTAL NET UNIT WEIGHT / VOLUME 873.5 lb / 16.4 ft³
TOTAL GROSS UNIT WEIGHT / GROSS VOLUME 1,079.5 lb / 41.2 ft³

Program Version 1.76.0.0

This proposal reflects the intended scope from the customer specifications supplied at the time of quotation. Additional
specifications, requirements and scope presented at time of award or during order execution outside the original bid scope
request, is subject to a change order with a potential cost and lead-time impact. ITT reserves the right to present engineering
charges for more than two revision cycles on submittal drawings, provided these two revision cycles cover the intent of the
specifications. ITT requires customer to provide all drawing comments applicable to the specification within the first submission
return.

Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is
limited to the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed
and incorporated then the Customer is responsible to identify those and provide copies for review and revision of our offer.

Page 2
Hydraulic Details
Item No ITEM 001 Pump Type 3196

Proposal # CS21-12-01 01

Liquid Characteristics Hydraulic Requirements

Service Rated capacity 528.0 gpm
Liquid AGUA FRIA NPSHa
Specific Gravity 1.000 Suct. pressure
Temperature 30.0 deg C Viscosity 1.000 cp
Solids size

GENERAL PUMP DATA VALUE PROTECTED

ERP Material Code 1012
ERP Size Code
Case thickness (in) 0.5000
Maximum Suction Head (ft) 16.0
Maximum Solids Size (in) 0.6250
Max Drive Power per 100 RPM (hp) 3.42
Maximum RPM 1,800
Disch. Size 3''
Suction Size 4''
Suction Specific Speed 9,877 gpm(US) ft
Maximum casing pressure at 30.0 (deg C) 250.0 psi g
Volute Single
WEIGHTS / MEASUREMENTS VALUE PROTECTED
Bare Pump Weight (lb) 295.0
Baseplate Weight (lb) 303.0
Coupling Weight (lb) 5.5
Total Unit Weight (bare pump, driver, etc) (lb) 873.5
Gross Total Weight (lb) 1,079.5
Net Volume (ft³) 16.4
Gross Volume (ft³) 41.2
SHAFT DATA VALUE PROTECTED
Shaft diameter between bearings (in) 2.1250
Shaft diameter at coupling (in) 1.1250
Shaft diameter at impeller (in) 1.0000
Shaft diameter at stuffing box less sleeve (in) 1.7500
Shaft diameter at stuffing box with sleeve (in) 1.5000
Shaft overhang (in) 8.3750
Shaft separation (in) 3.7500
Sleeve diameter (in) 1.7500

IMPELLER DATA VALUE PROTECTED

Maximum Impeller diameter (in) 10.0000
Minimum Impeller diameter (in) 6.0000

SEAL / DYN. SEAL VALUE PROTECTED

Diameter of mechanical seal with sleeve (in) 1.7500

Page 1
Proposal No : CS21-12-01 01 Item No: ITEM 001 Model: 3196
December 1, 2021 07:49:50

Hydraulic Details

BEARING DATA VALUE PROTECTED

Inboard bearing 6309
Outboard bearing 3309
Bearing Span (in) 6.7500

TEMPERATURES VALUE PROTECTED

Max Temperature Limit (deg C) 176.7
Min Temperature Limit (deg C) -31.7

POWER LOSS DATA VALUE PROTECTED

Mechanical Seal Power Loss (hp) 0.22

Viscosity Factors VALUE PROTECTED

Flow viscosity correction factor (rated)-1st stage 1.000
Head viscosity correction factor (rated)-1st stage 1.000
Efficiency viscosity correction factor (rated)-1st stage 1.000

Motor Data VALUE PROTECTED

(C) Length of driver including shaft (in) 24.00
(D) Motor dim. (in) 6.25
(O) Driver O dimension (in) 12.75
(U) Driver Shaft Diameter (in) 1.6250
(AK) Inner diameter of motor mounting flange (in) 7.0000
(B) Motor dim. (in) 12.50
Driver Weight (lb) 270.0
Program Version 1.76.0.0

Page 2
Standard Datasheet CENTRIFUGAL PUMP SPECIFICATION

CLIENT CONTRACT NO:

ADDRESS: BY: Carlos Sanchez DATE:

PLANT LOCATION: MEXICO APPROVED: DATE:

ITEM: ITEM 001 EQUIP.IDENT.NO:

PUMPING CONDITIONS
FLUID PUMPED: AGUA FRIA PUMP MATERIAL CLASS Ductile iron
PUMPING TEMP. (PT) 30.0 deg C 86.0 deg F VISCOSITY @ PT 1.000 CP PH

SPECIFIC GRAVITY @ PT 1.000 DENSITY @ PT 0.00 Lb/ft³

VAPOR PRESS. @ PT mmHg 0.00 PSI ABS SOLIDS CONTENT %WT

PERFORMANCE CHARACTERISTICS
CAPACITY, GPM NORMAL 0.0 RATED 528.0 MIN. HYDRAULIC / THERMAL FLOW 135.7 / N/A
TDH, FT: NORMAL RATED 72.0 DISCH.PRESSURE 31.8 PSI G

SUCTION PRESS., PSI G RATED 0.0 MAXIMUM 0.0

NPSH, FT ABS: AVAIL.(NORMAL) 0.0 (RATED) 7.1 REQD BY PUMP CURVE NO. 2929-7
BHP, hp (RATED) 13.2 (MAX) 14.8 EFFICIENCY (NORMAL) (RATED) 74.0
PUMP DESCRIPTION
TYPE 3196 MTi SIZE 3x4-10H RPM 1750 ROTATION CW CCW

IMPELLER TYPE Open DIA. in (RATED) 9.2500 (MAX) 10.0000 (MIN BY MFR) 6.0000
PACKING TYPE SIZE NO. OF RINGS 0 SEAL CAGE YES NO
MECH.SEAL MFR and MODEL/DYN SEAL John Crane 5611Q X(1)F(50)1XO(58)1 (Carbon vs Silicon Carbide with Viton)
SUCTION FLGD SCRD SIZE 4'' ANSI 150# LB.ASA FACING FF POSITION CL SIDE FACING UP

DISCHARGE FLGD SCRD SIZE 3'' ANSI 150# LB.ASA FACING FF POSITION TOP CTR TANGENT SIDE

BEARINGS (MFR AND TYPE): RADIAL 6309 THRUST 3309 (VERT.) THRUST UP DOWN

MATERIAL: CASING Ductile iron IMPELLER Ductile iron SHAFT/SLEEVE SAE 4140 / 316SS

SPECIAL MATERIAL
CASING: VENT NPT DRAIN NPT GAGE CONN. SUCTION DISCHARGE 3/8 / 3/8 NPT

STUFF.BOX: TAP FOR FLUSH NPT TAP FOR DRAIN NPT JACKETED NPT CONN:COOL WATER RQD GPM
CASING: NO OF STAGE 1 MOUNTING: CENTERLINE FOOT BRACKET VERTICAL

CASING SPLIT: HORZ VERTICAL TYPE OF VOLUTE: SINGLE DOUBLE DIFFUSER

COVER PLATE JACKETED NPT CONN. GLAND COOLING NPT CONN. BEARING HOUSING JACKETED NPT
PUMP BUILT TO: ANSI API STD 610 SPECIAL SPECIFICATIONS
COUPLING TYPE: Spacer MAKE: T.B. Wood's / Duraflex- WES-4 GUARD: Carbon steel
LUBRICATION: Flood oil HYDROSTATIC TEST PRESSURE: 0.0 PSI G

WEIGHT (LB): PUMP 295.0 DRIVER 270.0 BASEPLATE 303.0

PUMP SERIAL NO.:
PUMP CURVE NO.: 2929-7
SECTIONAL DWG.NO.:

DRIVER
ELECTRIC MOTOR 15.0 HP 460 V 3 PH CPS 1800 RPM EQUIP #

MFR Nidec CLASS DIVISION

STEAM TURBINE MFR STEAM PSI G EXHAUST PSI G

SPECIAL: MFR

REMARKS:

REV.NO. REVISION BY DATE APPD DATE VENDOR ITT Corporation

P.O.NO
C.O.NO
P.O.ITEM NO

ACCOUNT DIST.NO.
DELIVERY
NOT BEFORE DATE
 Model 3196 MTi
OUTLINE DRAWING Size 3x4-10H

Pump Specification Weights and Measurements

SUCT.FLANGE SIZE 4'' DRILLING ANSI 150# FACING FF FINISH SERRATED PUMP 295.0 lb
DISCH.FLANGE SIZE 3'' DRILLING ANSI 150# FACING FF FINISH SERRATED MOTOR/CPLG 270.0/5.5 lb
PUMP ROTATION ( LOOKING AT PUMP FROM MOTOR ) CW BASEPLATE 303.0 lb
TYPE OF LUBRICATION FLOOD OIL COOLED NO TOTAL 873.5 lb
TYPE OF STUFFING BOX STANDARD NON COOLED COOLED NO GR.VOLUME w/BOX 41.2 ft³
TYPE OF SEALING MECHANICAL SEAL GR.WEIGHT w/BOX 1,079.5 lb

Motor Specification Notes and References

MOTOR BY PUMP MFG MOUNT BY PUMP MFG MFG. NIDEC - MTR DIMENSIONS ARE APPROXIMATE
- INSTALL FOUNDATION BOLTS IN PIPE SLEEVES
FRAME 254T POWER 15.0 hp RPM 1800
- ALLOW FROM 0.75 to 1.50in. FOR
PHASE 3 FREQUENCY 60 HZ VOLTS 460 - THE BASEPLATE IS DESIGNED FOR GROUT
INSTALLATION UNLESS OTHERWISE NOTED. REFER TO
INSULATION F S.F. 1.15 THE INSTALLATION MANUAL INSTRUCTIONS.
ENCLOSURE TEFC - PREMIUM EFFICIENCY * Tolerance is -0.38 +0.38
** Foundation bolt grip thickness

Auxiliary Specification
COUPLING BY PUMP MFG CPLG TYPE T.B. WOOD'S DURAFLEX- WES-4
CPL GUARD BY PUMP MFG CPLG GUARD MATL CARBON STEEL
BASEPLATE FABRICATED STEEL TO ANSI B73.1M 1991 D07091A FOR PUMP TAPPED OPENINGS REFER TO DWG.:
TCS21-12-01 01 / ITEM 001
MECH.SEAL JOHN CRANE 5611Q X(1)F(50)1XO(58)1 (CARBON VS SILICON CARBIDE WITH VITON)

DRAWING IS FOR REFERENCE ONLY.

NOT CERTIFIED FOR CONSTRUCTION UNLESS SIGNED.

Customer: EQUI-PUMP SA DE CV
Serial No:
Customer P.O. No:
Item No: ITEM 001 (Base Offer)
End User: EQUIPUMP
All dimensions are in inches.
Drawing is not to scale
Weights (lbs) are approximate DRAWING NO CS21-12-01 01/ITEM 001
FORM # ED0064 Program Version 1.76.0.0
Model: 3196 Size: 3x4-10H Group: MTi 60Hz RPM: 1750 Stages: 1

Job/Inq.No. :
Purchaser : EQUI-PUMP SA DE CV
End User: EQUIPUMP Issued by : Carlos Sanchez
Item/Equip.No. : ITEM 001 (Base Offer) Quotation No. : CS21-12-01 01 Date : 12/01/2021
Service :
Order No. : Certified By : Rev. : 0
Operating Conditions Pump Performance
Liquid: AGUA FRIA Published Efficiency: 75.0 % Suction Specific Speed: 9,877 gpm(US) ft
Temp.: 30.0 deg C Rated Pump Efficiency: 74.0 % Min. Hydraulic Flow: 135.7 gpm
S.G./Visc.: 1.000/1.000 cp Rated Total Power: 13.2 hp Min. Thermal Flow: N/A
Flow: 528.0 gpm Non-Overloading Power: 14.8 hp
TDH: 72.0 ft Imp. Dia. First 1 Stg(s): 9.2500 in
NPSHa: NPSHr: 7.1 ft
Solid size: Shut off Head: 85.2 ft
% Susp. Solids Vapor Press: Max. Solids Size: 0.6250 in
(by wtg):
Notes: 1. Power and efficiency losses are not reflected on the curve below.
2. Curve shown is at ambient temperature conditions.
 Model: 3196 Size: 3x4-10H Group: MTi 60Hz RPM: 1750 Stages: 1

Job/Inq.No. :
Purchaser : EQUI-PUMP SA DE CV
End User : EQUIPUMP Issued by : Carlos Sanchez Rev. : 0
Item/Equip.No. : ITEM 001 (Base Offer) Quotation No. : CS21-12-01 01 Date : 12/01/2021
Service :
Order No. : Certified By :
Operating Conditions Pump Performance
Liquid: AGUA FRIA Published Efficiency: 75.0 % Suction Specific Speed: 9,877 gpm(US) ft
Temp.: 30.0 deg C Rated Pump Efficiency: 74.0 % Min. Hydraulic Flow: 135.7 gpm
S.G./Visc.: 1.000/1.000 cp Rated Total Power: 13.2 hp Min. Thermal Flow: N/A
Flow: 528.0 gpm Non-Overloading Power: 14.8 hp
TDH: 72.0 ft Imp. Dia. First 1 Stg(s): 9.2500 in
NPSHa: NPSHr: 7.1 ft Shut off Head: 85.2 ft
Solid size: Max. Solids Size: 0.6250 in % Susp. Solids
(by wtg):
Vapor Press:
Notes: 1. Curve shown is at ambient temperature conditions.

Viscosity corrections have been performed in accordance with HI 9.6.7-2015