0% found this document useful (0 votes)

83 views

Mechanical Directional Controls

This document provides information on mechanical directional control valves including direct acting check valves, pilot to open and double check valves, manual valves, pilot to shift valves, shuttle valves, and rotary valves. It lists specifications for various check valve models including flow rate, pressure rating, port size, and model page references. A schematic and description are provided for an inline check valve that allows flow in one direction while blocking it in the reverse direction using a spring-biased check ball.

Uploaded by

Marco Hernandez

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

83 views

Mechanical Directional Controls

Uploaded by

Marco Hernandez

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 346

MECHANICAL DIRECTIONAL CONTROLS

DIRECT ACTING CHECK VALVES ..................................................................................................................................................... MD3

PILOT TO OPEN AND DOUBLE PO CHECK VALVES .............................................................................................................. MD35

MANUAL VALVES ..................................................................................................................................................................................... MD55

PILOT TO SHIFT VALVES ....................................................................................................................................................................... MD77

SHUTTLE VALVES ..................................................................................................................................................................................... MD95

ROTARY VALVES ....................................................................................................................................................................................... MD103

WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 7 / 2017

without independent study, evaluation, and testing for suitability.

Page MD1
MECHANICAL DIRECTIONAL CONTROLS

without independent study, evaluation, and testing for suitability.

Page MD2
MECHANICAL DIRECTIONAL CONTROLS

DIRECT ACTING CHECK VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

8 3000 30 207 5/8-18 IM-CVA MD4

5 3500 19 241 5/8-18 MA-CVA MD6

10 4350 38 300 3/4-16 HB-CVA MD8

15 3500 57 241 7/8-14 DE-CVA MD10

15 5000 57 345 7/8-14 HE-CVA MD12

35 5000 132 345 1 1/16-12 HT-CVA MD14

40 3500 151 241 1 5/16-12 SJ-CVA MD16

10 3500 38 241 7/8-14 DE-CVB MD18

10 3500 38 241 3/4-16 PB-CVC MD20

8 3500 30 241 7/8-14 DE-CVC MD22

15 3500 57 241 7/8-14 DE-CVR MD24

35 5000 132 345 1 1/16-12 HT-CVR MD26

2.5 1500 9.5 103 5/8-18 MA-CVS MD28

5 3500 19 241 3/4-16 PB-CVS MD30

SOFT SEAT 10 1000 38 70 7/8-14 DE-CVS MD32

TYPICAL SCHEMATIC

Typical application for the CVA, CVB, CVC, CVR, and CVS is load holding in a lift, check, or dump circuit.

(1) (2)

CVA-CVB-CVC-CVS CVR

(2) (1)

without independent study, evaluation, and testing for suitability.

Page MD3
MECHANICAL DIRECTIONAL CONTROLS

IM-CVA INLINE CHECK VALVE

DESCRIPTION
#8 SAE, inline check valve.

OPERATION
The IM-CVA allows flow from (2) to (1), while normally blocking oil flow from (1) to (2). The valve has a guided
check ball, which is spring-biased closed until sufficient pressure is applied at (2) to open to (1).

HYDRAULIC SYMBOL

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 8 GPM (30 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Typical Internal Leakage
(150 SSU) 0-5 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .53 lbs (.24 kg)
Operating Fluid Media General Purpose Hydraulic Fluid

without independent study, evaluation, and testing for suitability.

Page MD4
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

ORDERING INFORMATION

IM-CVA – –

OPTIONS CRACK PRESSURE

Buna Standard 00 0005 5 PSI
0025 25 PSI
0050 50 PSI
0075 75 PSI

without independent study, evaluation, and testing for suitability.

Page MD5
MECHANICAL DIRECTIONAL CONTROLS

MA-CVA DIRECT ACTING CHECK VALVE, POPPET

DESCRIPTION
7 size, 5/8-18 thread, “Mini” series, direct acting check valve.

OPERATION
The MA-CVA allows flow passage from (2) to (1), while normally blocking oil flow from (1) to (2). The cartridge
has a fully guided poppet, which is spring-biased closed, until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Hardened parts for long life and low leakage.
• Optional bias springs for backpressure application flexibility.
• Fully guided poppet.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 5 10 15 20 25 30
300 20
250
Pressure Drop (PSI)

Pressure Drop (bar)

15
200
PERFORMANCE VALVE SPECIFICATIONS
150 10
Actual Test Data (Cartridge Only) Nominal Flow 5 GPM (19 LPM)
100 Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) 5 Typical Internal Leakage (150 SSU) 0-5 drops/min
50 0 5 10 15 20 25 30
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
300 20
0 0 Filtration ISO 18/16/13
2500 2 4 6 8 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (GPM) 15 Weight .08 lbs (.03 kg)

200
Port 2 to 1 Operating Fluid Media General Purpose Hydraulic Fluid
150 10
Cartridge Torque Requirements 15 ft-lbs (20.3 Nm)
100 Cavity MINI 2W
5
50 Cavity Form Tool (Finishing) 40500003
Seal Kit 21191000
0 0
0 2 4 6 8
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD6
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .29 lbs (.13 kg)

ORDERING INFORMATION

MA-CVA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

CRACK RESSURE
0005 5 PSI
0020 20 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD7
MECHANICAL DIRECTIONAL CONTROLS

HB-CVA DIRECT ACTING CHECK VALVE, POPPET

DESCRIPTION
“High Pressure” 8 size, 3/4-16 thread, “Power” series, direct acting check valve.

OPERATION
The HB-CVA allows free flow passage from (2) to (1), and blocks flow from (1) to (2). The cartridge has a fully
guided check poppet, which is spring-biased closed until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Hardened parts for long life and low leakage.
• Optional bias springs for backpressure application flexibility.
• Fully guided poppet assembly.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)

0 5 10 15 20 25 30 35 40 45
100
PERFORMANCE VALVE SPECIFICATIONS
Pressure Drop (bar) Pressure Drop (bar)
Pressure Drop (PSI)

Actual
75 Test Data (Cartridge Only) 5 Nominal Flow 10 GPM (38 LPM)
Rated Operating Pressure 4350 PSI (300 bar)
Flow (LPM)
50 Typical Internal Leakage (150 SSU) 0-5 drops/min
0 5 10 15 20 25 30 35 40 45
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
100
25 Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

75 5
0 0 Weight .10 lbs (.05 kg)
0 2 4 6 8 10 12 Operating Fluid Media General Purpose Hydraulic Fluid
50
Flow (GPM) Cartridge Torque Requirements 35 ft-lbs (47 Nm)
25 Port 2 to 1 Cavity POWER 2W
Cavity Form Tool (Finishing) 40500005
0 0 Seal Kit 21191100
0 2 4 6 8 10 12
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD8
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .40 lbs (.18 kg)

ORDERING INFORMATION

HB-CVA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

CRACK RESSURE
0005 5 PSI
0010 10 PSI
0030 30 PSI
0070 70 PSI
± 10%

Note: Aluminum, NOT durability rated for

4350 PSI. Consult factory for options.

without independent study, evaluation, and testing for suitability.

Page MD9
MECHANICAL DIRECTIONAL CONTROLS

DE-CVA DIRECT ACTING CHECK VALVE, POPPET

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, direct acting check valve.

OPERATION
The DE-CVA allows free flow passage from (2) to (1), and blocks flow from (1) to (2). The cartridge has a fully
guided check poppet, which is spring-biased closed, until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Hardened parts for long life and low leakage.
• Optional bias springs for backpressure application flexibility.
• Fully guided poppet assembly.
• Industry common cavity.

Drop-In pilot pistons can be used (except the 135

HYDRAULIC SYMBOL and 150 PSI version) to create P.O. Check Valve
Function, see the Hydraulic Integrated Circuits
section for details.

Flow (LPM)
0 25 50 75
200
Pressure Drop (bar)

150
Pressure Drop (PSI)

10
PERFORMANCE VALVE SPECIFICATIONS

Actual
100 Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
5 Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) Typical Internal Leakage (150 SSU) 0-5 drops/min
50
0 25 50 75
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200
Filtration ISO 18/16/13
0 0
0 5 10 15 20 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (bar)

150
Pressure Drop (PSI)

10 Weight .15 lbs (.07 kg)

Flow (GPM)
Operating Fluid Media General Purpose Hydraulic Fluid
Port 2 to 1
100 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
5 Cavity DELTA 2W
50 Cavity Form Tool (Finishing) 40500000
Seal Kit 21191200
0 0
0 5 10 15 20
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD10
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-CVA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
S #8 SAE Ports

CRACK RESSURE
0010 10 PSI
0035 35 PSI
0070 70 PSI
0100 100 PSI
0135 135 PSI
0150 150 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD11
MECHANICAL DIRECTIONAL CONTROLS

HE-CVA DIRECT ACTING CHECK VALVE, POPPET

DESCRIPTION
“High Pressure” 10 size, 7/8-14 thread, “Delta” series, direct acting check valve.

OPERATION
The HE-CVA allows free flow passage from (2) to (1), and blocks flow from (1) to (2). The cartridge has a fully
guided check poppet, which is spring-biased closed, until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Hardened parts for long life and low leakage.
• Optional bias springs for backpressure application flexibility.
• Fully guided poppet assembly.
• Industry common cavity.

Drop-In pilot pistons can be used (except the 135

HYDRAULIC SYMBOL and 150 PSI version) to create P.O. Check Valve
Function, see the Hydraulic Integrated Circuits
section for details.

Flow (LPM)
0 25 50 75
250
15
200
Pressure Drop (bar)
Pressure Drop (PSI)

PERFORMANCE VALVE SPECIFICATIONS

150 10
Actual Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
100 Rated Operating Pressure 5000 PSI (345 bar)
Flow (LPM) 5 Typical Internal Leakage (150 SSU) 0-5 drops/min
50 0 25 50 75
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
250
0 0 Filtration ISO 18/16/13
15
200 0 5 10 15 20 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (bar)
Pressure Drop (PSI)

Flow (GPM) Weight 1.23 lbs (.56 kg)

150 Port 2 to 1 10 Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 50 ft-lbs (67.8 Nm)
100
Cavity DELTA 2W
5
Cavity Form Tool (Finishing) 40500000
50
Seal Kit 21191200
0 0
0 5 10 15 20
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD12
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

ORDERING INFORMATION

HE-CVA – – –

OPTIONS BODIES
Buna Standard 00 Consult Factory
Viton Standard V0

CRACK RESSURE
0005 5 PSI
0010 10 PSI
0020 20 PSI
0035 35 PSI
0070 70 PSI
0090 90 PSI
0135 135 PSI
0150 150 PSI
± 10% WARNING
DO NOT USE ALUMINUM BODY
HIGH PRESSURE (5000 PSI) PRODUCT
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 7 / 2017

without independent study, evaluation, and testing for suitability.

Page MD13
MECHANICAL DIRECTIONAL CONTROLS

HT-CVA DIRECT ACTING CHECK VALVE, POPPET

DESCRIPTION
“High Pressure” 12 size, 1 1/16-12 thread, “Tecnord” series, direct acting check valve.

OPERATION
The HT-CVA allows flow passage from (2) to (1), while normally blocking oil flow from (1) to (2). The cartridge
has a fully guided poppet, which is spring biased closed, until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Hardened parts for long life and low leakage.
• Industry common cavity.
• Optional bias springs for backpressure application flexibility.

HYDRAULIC SYMBOL

Flow (LPM)
0 25 50 75 100 125 150
150 10
Pressure Drop (bar)
Pressure Drop (PSI)

100
PERFORMANCE VALVE SPECIFICATIONS
5

Actual50Test Data (Cartridge Only) Nominal Flow 35 GPM (132 LTR/M)

Rated Operating Pressure 5000 PSI (345 bar)
Flow (LPM)
Typical Internal Leakage (150 SSU) 0-5 drops/min
00 25 50 75 100 125 0 150
0 5 10 15 20 25 30 35 40 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
150 10
Flow (GPM) Filtration ISO 18/16/13
Port 2 to 1 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (bar)
Pressure Drop (PSI)

100 Weight .55 lbs (.25 kg)

Operating Fluid Media General Purpose Hydraulic Fluid
5 Cartridge Torque Requirements 70 ft-lbs (95 Nm)
50 Cavity TECNORD 2W
Cavity Form Tool (Finishing) 40500032
Seal Kit 21191300
0 0
0 5 10 15 20 25 30 35 40
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD14
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: 3.71 lbs (1.68 kg)

ORDERING INFORMATION

HT-CVA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports

CRACK RESSURE
0010 10 PSI
0030 30 PSI
0050 50 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD15
MECHANICAL DIRECTIONAL CONTROLS

SJ-CVA DIRECT ACTING CHECK VALVE, POPPET

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, direct acting check valve.

OPERATION
The SJ-CVA allows free flow from (2) to (1) and blocks flow from (1) to (2). The cartridge has a fully guided poppet,
which is spring-biased closed, until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Hardened parts for long life and low leakage.
• Industry common cavity.
• Optional bias springs for backpressure application flexibility.

HYDRAULIC SYMBOL

Flow (LPM)
0 25 50 75 100 125 150
150 10
Pressure Drop (bar)
Pressure Drop (PSI)

100
PERFORMANCE VALVE SPECIFICATIONS
5
Actual Test Data (Cartridge Only) Nominal Flow 40 GPM (151 LPM)
50 Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM)
Typical Internal Leakage (150 SSU) 0-5 drops/min
0 25 50 75 100 125 150
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
1500 0 10
Filtration ISO 18/16/13
0 5 10 15 20 25 30 35 40
Flow (GPM)
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (bar)
Pressure Drop (PSI)

100 Weight .67 lbs (.30 kg)

Port 2 to 1
Operating Fluid Media General Purpose Hydraulic Fluid
5 Cartridge Torque Requirements 90 ft-lbs (122 Nm)
50 Cavity SUPER 2W
Cavity Form Tool (Finishing) 40500017
Seal Kit 21191400
0 0
0 5 10 15 20 25 30 35 40
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD16
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: 1.29 lbs (.58 kg)

ORDERING INFORMATION

SJ-CVA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4” NPTF Ports
S #12 SAE Ports

CRACK RESSURE
0005 5 PSI
0010 10 PSI
0030 30 PSI
0050 50 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD17
MECHANICAL DIRECTIONAL CONTROLS

DE-CVB DIRECT ACTING CHECK VALVE, BALL

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, direct acting, check valve.

OPERATION
The DE-CVB allows free flow passage from (2) to (1), and blocks flow from (1) to (2). The cartridge has a
hardened ball, which is spring-biased closed, until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Hardened seat for long life and low leakage.
• Optional bias springs for backpressure application flexibility.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55
250
15
200
Pressure Drop (bar)
Pressure Drop (PSI)

150 10

100
PERFORMANCE 5 VALVE SPECIFICATIONS
50
Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
0 0 Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM)
0 5 10 15 Typical Internal Leakage (150 SSU) 0-5 drops/min
0 5 10 15 20 Flow
25(GPM)
30 35 40 45 50 55
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
250
Port 2 to 1 Filtration ISO 18/16/13
15
200 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (bar)
Pressure Drop (PSI)

Weight .14 lbs (.06 kg)

150 10 Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
100
Cavity DELTA 2W
5
Cavity Form Tool (Finishing) 40500000
50
Seal Kit 21191000
0 0
0 5 10 15
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD18
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-CVB – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
S #8 SAE Ports

CRACK RESSURE
0005 5 PSI
0015 15 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD19
MECHANICAL DIRECTIONAL CONTROLS

PB-CVC DIRECT ACTING CHECK VALVE, GUIDED BALL

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, direct acting check valve.

OPERATION
The PB-CVC allows free flow passage from (2) to (1), and blocks flow from (1) to (2). The cartridge has a fully
guided hardened ball, which is spring-biased closed, until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Hardened parts for long life and low leakage.
• Optional bias springs for backpressure application flexibility.
• Fully guided ball assembly.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 5 10 15 20 25 30 35 40 45
PERFORMANCE
100 VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
Pressure Drop (bar)
Pressure Drop (PSI)

75 5 Rated Operating Pressure 3500 PSI (241 bar)

Flow (LPM)
Typical Internal Leakage (150 SSU) 0-5 drops/min
50 0 5 10 15 20 25 30 35 40 45 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
100
Filtration ISO 18/16/13
25 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (bar)
Pressure Drop (PSI)

75 5 Weight .10 lbs (.05 kg)

0 0 Operating Fluid Media General Purpose Hydraulic Fluid
500 2 4 6 8 10 12 Cartridge Torque Requirements 25 ft-lbs (34 Nm)
Flow (GPM) Cavity POWER 2W
25 Port 2 to 1 Cavity Form Tool (Finishing) 40500005
Seal Kit 21191100
0 0
0 2 4 6 8 10 12
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD20
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-CVC – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

CRACK RESSURE
0005 5 PSI
0020 20 PSI
0030 30 PSI
0050 50 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD21
MECHANICAL DIRECTIONAL CONTROLS

DE-CVC DIRECT ACTING CHECK VALVE, GUIDED BALL

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, direct acting check valve.

OPERATION
The DE-CVC allows free flow passage from (2) to (1), and blocks flow from (1) to (2). The cartridge has a fully
guided hardened ball, which is spring-biased closed, until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Hardened parts for long life and low leakage.
• Optional bias springs for backpressure application flexibility.
• Fully guided ball assembly.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 10 20 30 40
350

300 20
Pressure Drop (bar)
Pressure Drop (PSI)

250
15
200

150 10
PERFORMANCE VALVE SPECIFICATIONS
100
5
Actual
50 Test Data (Cartridge Only) Nominal Flow 8 GPM (30 LPM)
0 0 Rated Operating Pressure 3500 PSI (241 bar)
0 2 4 Flow
6 (LPM) 8 10 12
Typical Internal Leakage (150 SSU) 0-5 drops/min
Flow (GPM)
0 10 20 30 40 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
350 port 1 to 2
Filtration ISO 18/16/13
300 20 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (bar)
Pressure Drop (PSI)

250
15
Weight .15 lbs (.07 kg)
200
Operating Fluid Media General Purpose Hydraulic Fluid
150 10 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
100
5
Cavity DELTA 2W
50 Cavity Form Tool (Finishing) 40500000
0 0 Seal Kit 21191200
0 2 4 6 8 10 12
Flow (GPM)
port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MD22
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-CVC – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
S #8 SAE Ports

CRACK RESSURE
0003 3 PSI
0005 5 PSI
0010 10 PSI
0020 20 PSI
0035 35 PSI
0050 50 PSI
0075 75 PSI
0095 95 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD23
MECHANICAL DIRECTIONAL CONTROLS

DE-CVR REVERSE FLOW CHECK VALVE, POPPET

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, reverse flow check valve.

OPERATION
The DE-CVR allows free flow (1) to (2) and blocks flow from (2) to (1).

FEATURES
• Hardened parts for long life and low leakage.
• Industry common cavity.
• Optional bias springs for backpressure application flexibility.

HYDRAULIC SYMBOL

Flow (LPM)

0 25 50 75
200
Pressure Drop (bar)
Pressure Drop (PSI)

150 10

PERFORMANCE
100 VALVE SPECIFICATIONS
5
Actual 50
Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM)
0 0 Typical Internal Leakage (150 SSU) 0-5 drops/min
00 5 25 10 50
15 20 75 25 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200 Flow (GPM) Filtration ISO 18/16/13
Port 1 to 2 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (bar)
Pressure Drop (PSI)

150 10 Weight .15 lbs (.07 kg)

Operating Fluid Media General Purpose Hydraulic Fluid
100
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
5
Cavity DELTA 2W
50
Cavity Form Tool (Finishing) 40500000
Seal Kit 21191204
0 0
0 5 10 15 20 25
Flow (GPM)

Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MD24
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-CVR – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
S #8 SAE Ports

CRACK RESSURE
0005 5 PSI
0025 25 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD25
MECHANICAL DIRECTIONAL CONTROLS

HT-CVR REVERSE FLOW CHECK VALVE, POPPET

DESCRIPTION
“High Pressure” 12 size, 1 1/16-12 thread, “Tecnord” series, reverse flow check valve.

OPERATION
The HT-CVR allows free flow from (1) to (2) and blocks flow from (2) to (1). The cartridge has a fully guided
poppet, which is spring biased closed, until sufficient pressure is applied at (1) to open to (2).

FEATURES
• Hardened parts for long life and low leakage.
• Industry common cavity.
• Optional bias springs for backpressure application flexibility.

HYDRAULIC SYMBOL

Flow (LPM)
0 25 50 75 100 125 150
150 10
PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 35 GPM (132 LPM)
Pressure Drop (bar) Pressure Drop (bar)
Pressure Drop (PSI)

100 Rated Operating Pressure 5000 PSI (345 bar)

Flow (LPM) Typical Internal Leakage (150 SSU) 0-8 drops/min
5
0 25 50 75 100 125 150 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
50
150 10 Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Weight .55 lbs (.25 kg)

1000 0
0 5 10 15 20 25 30 35 40 Operating Fluid Media General Purpose Hydraulic Fluid
Flow (GPM) 5 Cartridge Torque Requirements 70 ft-lbs (95 Nm)
50 Cavity TECNORD 2W
Port 1 to 2
Cavity Form Tool (Finishing) 40500032
Seal Kit 21191300
0 0
0 5 10 15 20 25 30 35 40
Flow (GPM)
Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MD26
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: 3.71 lbs (1.68 kg)

ORDERING INFORMATION

HT-CVR – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports

CRACK RESSURE
0010 10 PSI
0030 30 PSI
0050 50 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD27
MECHANICAL DIRECTIONAL CONTROLS

MA-CVS DIRECT ACTING CHECK VALVE, SOFT SEAT, POPPET

DESCRIPTION
7 size, 5/8-18 Thread, “Mini” series, direct acting check valve, soft seat, poppet.

OPERATION
The MA-CVS allows free flow (2) to (1) and blocks flow from (1) to (2). The cartridge has a fully guided poppet,
which is spring-biased closed, until sufficient pressure is applied at (2) to open (1).

FEATURES
• Soft seat for ultra low leakage.
• Industry common cavity.
• Optional bias springs for backpressure application flexibility.
• Fully guided poppet.

HYDRAULIC SYMBOL Drop-in Pilot Pistons are NOT RECOMMENDED

for this valve.

Flow (LPM)
0 5 10 15 20 25 30
300 20
250
Pressure Drop (bar)
Pressure Drop (PSI)

15
200
PERFORMANCE VALVE SPECIFICATIONS
150 10
Actual Test Data (Cartridge Only) Nominal Flow 2.5 GPM (9.5 LPM)
100
5 Rated Operating Pressure 1500 PSI (103 bar)
Flow (LPM)
50
0 5 10 15 20 25 30
Typical Internal Leakage (150 SSU) Negligible
0
300 0
20 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 2 4 6 8
250 Filtration ISO 18/16/13
Flow (GPM)
Pressure Drop (bar)
Pressure Drop (PSI)

15 Media Operating Temp. Range -32° to 120°F (0° to 49°C)

200 Port 2 to 1
Weight .08 lbs (.03 kg)
150 10
Operating Fluid Media General Purpose Hydraulic Fluid
100 Cartridge Torque Requirements 15 ft-lbs (20.3 Nm)
5
50 Cavity MINI 2W
0 0 Cavity Form Tool (Finishing) 40500003
0 2 4 6 8 Seal Kit 21191000
Flow (GPM)
Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD28
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .29 lbs (.13 kg)

ORDERING INFORMATION

MA-CVS – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

CRACK RESSURE
0005 5 PSI
0020 20 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD29
MECHANICAL DIRECTIONAL CONTROLS

PB-CVS DIRECT ACTING CHECK VALVE, SOFT SEAT, POPPET

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, direct acting check valve, soft seat, poppet.

OPERATION
The PB-CVS allows free flow passage from (2) to (1), and blocks flow from (1) to (2). The cartridge has a fully
guided poppet, which is spring-biased closed, until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Soft seat for ultra low leakage.
• Optional bias springs for backpressure application flexibility.
• Fully guided poppet assembly.
• Industry common cavity.

HYDRAULIC SYMBOL Drop-in Pilot Pistons are NOT RECOMMENDED

for this valve.

Flow (LPM)
0 5 10 15 20 25 30
250
15
200
Pressure Drop (bar)
Pressure Drop (PSI)

150 10
PERFORMANCE VALVE SPECIFICATIONS
100
Actual Test Data (Cartridge Only) Nominal Flow 5 GPM (19 LPM)
5 Rated Operating Pressure 3500 PSI (241 bar)
50 Flow (LPM)
Typical Internal Leakage (150 SSU) Negligible
0 5 10 15 20 25 30
0
250 0 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 2 4 6 8 Filtration ISO 18/16/13
15
200 Flow (GPM) Media Operating Temp. Range -32° to 120°F (0° to 49°C)
Pressure Drop (bar)
Pressure Drop (PSI)

Port 2 to 1 Weight .09 lbs (.04 kg)

150 10 Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
100
Cavity POWER 2W
5
50 Cavity Form Tool (Finishing) 40500005
Seal Kit 21191100
0 0
0 2 4 6 8
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD30
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-CVS – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

CRACK RESSURE
0005 5 PSI
0020 20 PSI
0030 30 PSI
0050 50 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD31
MECHANICAL DIRECTIONAL CONTROLS

DE-CVS DIRECT ACTING CHECK VALVE, SOFT SEAT, POPPET

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, soft seat check valve.

OPERATION
The DE-CVS allows flow to pass from (2) to (1) and blocks flow from (1) to (2). The cartridge has a fully guided
check poppet, which is spring-biased closed until sufficient pressure is applied at (2) to open to (1).

FEATURES
• Soft seat for ultra low leakage.
• Industry common cavity.
• Optional bias springs for backpressure application flexibility.

Drop-In pilot pistons are NOT RECOMMENDED

HYDRAULIC SYMBOL for this valve. If you would like to create P.O. Check
Valve Function, please use the CVA valve and/or
see the Hydraulic Integrated Circuits section for
details.

Flow (LPM)
0 25 50 75
250
PERFORMANCE 15 VALVE SPECIFICATIONS
200
Pressure Drop (bar)
Pressure Drop (PSI)

Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LTR/N)
150 10 Rated Operating Pressure 1000 PSI (70 bar)
100 Flow (LPM) Typical Internal Leakage (150 SSU) Negligible
0 25 50 755 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
50
250 Filtration ISO 18/16/13
Media Operating Temp. Range -32° to 160°F (0° to 70°C)
0
200 015
Pressure Drop (bar)

Weight .14 lbs (.06 kg)

Pressure Drop (PSI)

0 5 10 15 20
150 Operating Fluid Media General Purpose Hydraulic Fluid
Flow (GPM) 10
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
100 Port 2 to 1 Cavity DELTA 2W
5 Cavity Form Tool (Finishing) 40500000
50
Seal Kit 21191200
0 0
0 5 10 15 20
Flow (GPM)

Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD32
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-CVS – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
S #8 SAE Ports

CRACK RESSURE
0010 10 PSI
± 15%

without independent study, evaluation, and testing for suitability.

Page MD33
MECHANICAL DIRECTIONAL CONTROLS

without independent study, evaluation, and testing for suitability.

Page MD34
MECHANICAL DIRECTIONAL CONTROLS

PILOT TO OPEN AND DOUBLE PO CHECK VALVES

PILOT TO OPEN CHECK VALVES GPM PSI LPM BAR CAVITY MODEL PAGE

6 3500 23 241 3/4-16 PP-CPB MD36

8 3500 30 241 7/8-14 DF-CPB MD38

10 3500 38 241 7/8-14 DF-CPC MD40

DOUBLE PO CHECK VALVES GPM PSI LPM BAR CAVITY MODEL PAGE

5 3000 19 207 3/4-16 PQ-CDP MD42

8 3000 30 207 7/8-14 DG-CDP MD44

PILOT TO CLOSE CHECK VALVES GPM PSI LPM BAR CAVITY MODEL PAGE

10 3500 38 241 7/8-14 DF-CPD MD46

20 3500 76 241 1 5/16-12 SL-CPD MD48

CHECK VALVES WITH

GPM PSI LPM BAR CAVITY MODEL PAGE
THERMAL RELIEF

15 4000 57 276 7/8-14 DE-CVT MD50

LOAD HOLDING VALVES GPM PSI LPM BAR CAVITY MODEL PAGE

15 4000 57 276 M20 X 1.5 QS-CBS MD52

without independent study, evaluation, and testing for suitability.

Page MD35
MECHANICAL DIRECTIONAL CONTROLS

PP-CPB PILOT OPERATED CHECK VALVE, GUIDED BALL

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, pilot operated, ball check valve.

OPERATION
The PP-CPB allows free flow to pass from (2) to (1) and blocks flow from (1) to (2). When pilot pressure is applied
to port (3) the valve allows free flow from (1) to (2).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
For sealed pilot piston consult factory.

Flow (LPM)

0 5 10 15 20
300 20
250
PERFORMANCE VALVE SPECIFICATIONS
Pressure Drop (bar)
Pressure Drop (PSI)

15
200
Actual Test Data (Cartridge Only) Nominal Flow 6 GPM (23 LTR/M) from (1) to (2)
150 10
4 GPM (15 LTR/M) from (2) to (1)
100
Flow (LPM) Rated Operating Pressure 3500 PSI (241 bar)
5
50 Typical Internal Leakage (150 SSU) 0-5 drops/min
0 5 10 15 20
3000 0 Pilot Ratio 4:1
20
0 2 4 6 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
250 Flow (GPM)
Pressure Drop (bar)
Pressure Drop (PSI)

15 Filtration ISO 18/16/13

200 Free Flow 2 to 1 Piloted Flow 1 to 2
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
150 10 Weight .14 lbs (.06 kg)
100 Operating Fluid Media General Purpose Hydraulic Fluid
5
50 Cartridge Torque Requirements 25 ft-lbs (34 Nm)
Cavity POWER 3W
0 0
0 2 4 6 Cavity Form Tool (Finishing) 40500024
Flow (GPM) Seal Kit 21191108
Free Flow 2 to 1 Piloted Flow 1 to 2

without independent study, evaluation, and testing for suitability.

Page MD36
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

ORDERING INFORMATION

PP-CPB – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

CRACK RESSURE
0025 25 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD37
MECHANICAL DIRECTIONAL CONTROLS

DF-CPB PILOT OPERATED CHECK VALVE, GUIDED BALL

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pilot operated, ball check valve.

OPERATION
The DF-CPB allows free flow to pass from (2) to (1) and blocks flow from (1) to (2). When pilot pressure is applied
to port (3) the valve allows free flow from (1) to (2).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL For sealed pilot piston consult factory.

0.030″ to 0.060″ diameter orifice recommended
in the feed line to port #3.

Flow (LPM)

0 10 20 30 40
300
20
PERFORMANCE VALVE SPECIFICATIONS
250
Actual Test Data (Cartridge Only) Nominal Flow 8 GPM (30 LTR/M) from (1) to (2)
15
Pressure Drop (bar)
Pressure Drop (PSI)

200 5 GPM (19 LTR/M) from (2) to (1)

Flow (LPM) Rated Operating Pressure 3500 PSI (241 bar)
0
150 10 20 30 40 10
Typical Internal Leakage (150 SSU) 0-5 drops/min
300
20 Pilot Ratio 4:1
100
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
250 5
Filtration ISO 18/16/13
50 15
Pressure Drop (bar)
Pressure Drop (PSI)

200 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

150 0 Weight 0 .19 lbs (.09 kg)
10
0 2 4 6 8 10 Operating
12 Fluid Media General Purpose Hydraulic Fluid
100 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Flow (GPM) 5
50 Cavity DELTA 3W
Free Flow 2 to 1 Piloted Open 1 to 2 Cavity Form Tool (Finishing) 40500001
0 0
Seal Kit 21191202
0 2 4 6 8 10 12
Flow (GPM)

Free Flow 2 to 1 Piloted Open 1 to 2

without independent study, evaluation, and testing for suitability.

Page MD38
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

ORDERING INFORMATION

DF-CPB – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
S #6 SAE Ports

CRACK RESSURE
0025 25 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD39
MECHANICAL DIRECTIONAL CONTROLS

DF-CPC PILOT TO OPEN, CHECK VALVE, GUIDED BALL

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pilot to open, ball check valve.

OPERATION
The DF-CPC allows free flow to pass from (2) to (1) and blocks flow from (1) to (2). When pilot pressure is applied
to port (3) the valve allows free flow from (1) to (2). The cartridge has a 2:1 pilot ratio, meaning that at least one
half of the load pressure held at (1) is required at (3) to open the valve. The check is spring biased to assure
holding in static or no-load conditions.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL Special higher bias spring values available.

Consult factory. For sealed pilot piston consult
factory.

Flow (LPM)
0 10 20 30 40 50
200

PERFORMANCE VALVE SPECIFICATIONS

Pressure Drop (bar)

150
Pressure Drop (PSI)

10
Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
100 Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) Typical Internal Leakage (150 SSU) 0-5 drops/min
5
0 10 20 30 40 50 Pilot Ratio 2:1
50
200
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 0 Filtration ISO 18/16/13
Pressure Drop (bar)

150 0
Pressure Drop (PSI)

2 4 6 8 10 12 14 10 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

Flow (GPM)
Weight .19 lbs (.09 kg)
100 Free Flow 2 to 1 Piloted Open 1 to 2 Operating Fluid Media General Purpose Hydraulic Fluid
5 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
50 Cavity DELTA 3W
Cavity Form Tool (Finishing) 40500001
0 0 Seal Kit 21191202
0 2 4 6 8 10 12 14
Flow (GPM)

Free Flow 2 to 1 Piloted Open 1 to 2

without independent study, evaluation, and testing for suitability.

Page MD40
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

ORDERING INFORMATION

DF-CPC – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

CRACK RESSURE
0025 25 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD41
MECHANICAL DIRECTIONAL CONTROLS

PQ-CDP DOUBLE PILOT OPERATED CHECK VALVE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, double pilot operated check valve.

OPERATION
The PQ-CDP allows flow to pass from (3) to (4) and (2) to (1). The valve blocks flow from (4) to (3) and from (1)
to (2). Blocked flow is released when pilot pressure is applied to the port opposite of (3) and/or (2) respectively.
The valve has a 3:1 pilot ratio, so at least 1/3 of the load pressure at port (4) or (1) is required at the pilot line ports
“ports (4) or (1) respectively” to open the flow passage to allow flow from port (4) or (1) respectively. The check
spring biased at 20 PSI (1.4 bar) to assure holding in the static or no-load conditions.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Great for “in Cylinder” use application.

PERFORMANCE HYDRAULIC SYMBOL

Actual Test Data (Cartridge Only)

PRESSURE DROP - PILOTED PRESSURE DROP - PILOTED
Flow (LPM) Flow (LPM)
0 4 8 12 16 20 0 4 8 12 16 20
200 200
12 12

Pressure Drop (bar)

150
Pressure Drop (PSI)
Pressure Drop (PSI)

150
9 9
100 100
6 6

50 3 50 3

0 0 0 0
0 1 2 3 4 5 6 0 SPECIFICATIONS
1 2 3 4 5 6
VALVE
Flow (GPM) Flow (GPM)
PRESSURE DROP - PILOTED PRESSURE DROP - PILOTED
Nominal Flow 5 GPM (19 LPM)
Pressure drop 2 Flow
to 1 (LPM)
Pressure drop 3 to 4 Pressure drop 2 to 1
Flow (LPM)
Pressure3000
drop 3PSI
to 4(207 bar)
0 4 8 12 16 20 Rated Operating
0 Pressure
4 8 12 16 20
200 200Internal Leakage (150 SSU)
Typical 0-5 drops/min
PRESSURE DROP - PILOTED
Flow (LPM) 12 Viscosity Range 12647 cSt)
36 to 3000 SSU (3 to
Pressure Drop (bar)
Pressure Drop (bar)

150
Pressure Drop (PSI)
Pressure Drop (PSI)

1500 4 8 12 16 20 Filtration ISO 18/16/13

200 9 9
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
100 12 100
6 Weight .12 lbs (.05 kg) 6
Pressure Drop (bar)
Pressure Drop (bar)

150
Pressure Drop (PSI)

9 Operating Fluid Media General Purpose Hydraulic Fluid

50 3 50
Cartridge Torque Requirements 25 ft-lbs (34 Nm) 3
100
6 Cavity POWER 4W
0 0 0 0
50 0 1 2 3 4 5 6 Cavity Form Tool (Finishing) 40500029
3 0 1 2 3 4 5 6
Flow (GPM) Seal Kit Flow (GPM) 21191112
0 0
Pressure drop 2 to 1 Pressure drop 3 to 4 Pressure drop 2 to 1 Pressure drop 3 to 4
0 1 2 3 4 5 6
Flow (GPM)

Pressure drop 2 to 1 Pressure drop 3 to 4

without independent study, evaluation, and testing for suitability.

Page MD42
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

ORDERING INFORMATION

PQ-CDP – – –

OPTIONS BODIES
Urethane Standard U0 Blank Without Body
N 1/4” NPTF Ports
S #6 SAE Ports

SPRING BIAS
0020 20 PSI

without independent study, evaluation, and testing for suitability.

Page MD43
MECHANICAL DIRECTIONAL CONTROLS

DG-CDP DOUBLE PILOT OPERATED CHECK VALVE

DESCRIPTION
10 size, 7/8 -14 thread, “Delta” series, double pilot operated check valve.

OPERATION
The DG-CDP allows flow to pass from (3) to (4) and (2) to (1). The valve blocks flow from (4) to (3) and from (1)
to (2). Blocked flow is released when pilot pressure is applied to the port opposite of (3) and/or (2) respectively.
The valve has a 3:1 pilot ratio, so at least 1/3 of the load pressure at port (4) or (1) is required at the pilot line ports
“ports (4) or (1) respectively” to open the flow passage to allow flow from port (4) or (1) respectively. The check
spring biased at 20 PSI (1.4 bar) to assure holding in the static or no-load conditions.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Great for “in Cylinder” use application.

PERFORMANCE HYDRAULIC SYMBOL

Actual Test Data (Cartridge Only)

PRESSURE DROP - PILOTED
Flow (LPM) PRESSURE DROP - PILOTED
Flow (LPM)
0 10 20 30
250
0 10 20 30
15 200
200
Pressure Drop (bar)

12
Pressure Drop (PSI)

Pressure Drop (bar)

Pressure Drop (PSI)

150 10
150 10
8
100
100 6
5 4
50
50
2
0 0
0 0
0 2 4 6 8 10
0 2 4 6 8 10 VALVE SPECIFICATIONS
Flow (GPM) Flow (GPM)
Nominal Flow 8 GPM (30 LPM)
Pressure Drop 2 toDROP
PRESSURE 1 Pressure
- PILOTEDDrop 3 to 4 Pressure Drop 4 to 3 Pressure Drop 1 to 2
Rated Operating Pressure 3000 PSI (207 bar)
PRESSURE DROP - PILOTED
Flow (LPM)
Typical Internal Leakage (150Flow
SSU)
(LPM) 0-5 drops/min
0 10
PRESSURE 20- PILOTED
DROP 30
250 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Flow (LPM) 0 10 20 30
15 Filtration
200 ISO 18/16/13
2000 10 20 30
Pressure Drop (bar)

Media Operating Temp. Range 12120°C)

-40° to 250°F (-40° to
Drop (PSI)

Pressure Drop (bar)

200
Pressure Drop (PSI)

150 10
Weight .20 lbs (.09 kg)
Pressure Drop (bar)

150 12
10
Pressure Drop (bar)
Drop (PSI)

150 8
10 Operating
100 Fluid Media General Purpose Hydraulic Fluid
Pressure

100 8 6
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
100
65 50
Cavity DELTA 4W
4
Pressure

50
4 2
50 Cavity Form Tool (Finishing) 40500002
20 0 0
0
Seal Kit 0 2 4 6 21191216
8 10
0 0 2 4 6 8 100
0 2 4 Flow (GPM)
6 8 10 Flow (GPM)

Pressure DropFlow
2 to 1(GPM)Pressure Drop 3 to 4 Pressure Drop 4 to 3 Pressure Drop 1 to 2
Pressure Drop 4 to 3 Pressure Drop 1 to 2

without independent study, evaluation, and testing for suitability.

Page MD44
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-CDP – – –

OPTIONS BODIES
Urethane Standard U0 Blank Without Body
N 1/4” NPTF Ports
S #6 SAE Ports

SPRING BIAS
0020 20 PSI

without independent study, evaluation, and testing for suitability.

Page MD45
MECHANICAL DIRECTIONAL CONTROLS

DF-CPD PILOT TO CLOSE CHECK VALVE, GUIDED BALL

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pilot to close, ball check valve.

OPERATION
The DF-CPD allows free flow from (3) to (2), and blocks flow from (2) to (3). Flow will be blocked from (3) to (2)
when sufficient pressure is applied at (1). The cartridge has various “pilot ratios” (see options).

Example: 1/4 for 4:1 of the load pressure held at (3) is required at (1) to close the valve. The check is spring
biased to assure holding in static or no-load conditions.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL Consult chart for flow operation of each model.

Special higher bias spring values available.
Consult factory.

Flow (LPM)
0 5 10 15 20 25 30 35 40 45
PERFORMANCE
250 VALVE SPECIFICATIONS
15
Actual
200 Test Data (Cartridge Only) Maximum Flow 10 GPM (38 LPM)
Pressure Drop (PSI)

Pressure Drop (bar)

Rated Operating Pressure 3500 PSI (241 bar)

150 Flow (LPM) 10 Typical Internal Leakage (150 SSU) 50 drops/min from (2) to (3)
0 5 10 15 20 25 30 35 40 45
5 drops/min from (3) to (2)
100 250
when port (1) is piloted
155
50 200 Pilot Ratio (see options)
Pressure Drop (PSI)

Pressure Drop (bar)

Viscosity Range 36 to 3000 SSU (3 to 647 cSt)

150 100
0 Filtration ISO 18/16/13
0 2 4 6 8 10 12
100 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Flow (GPM)
5 Weight .20 lbs (.09 kg)
50 Port 3 to 2 (4:1) Port 3 to 2 (6:1)
Operating Fluid Media General Purpose Hydraulic Fluid
0 0 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
0 2 4 6 8 10 12 Cavity DELTA 3W
Flow (GPM)
Cavity Form Tool (Finishing) 40500001
Port 3 to 2 (4:1) Port 3 to 2 (6:1)
Seal Kit 21191202

without independent study, evaluation, and testing for suitability.

Page MD46
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-CPD – – –

OPTIONS BODIES
Buna, 4:1 Ratio 04 Blank Without Body
Buna, 6:1 Ratio 06 N 1/4” NPTF Ports
Viton, 4:1 Ratio V4 S #6 SAE Ports
Viton, 6:1 Ratio V6

CRACK RESSURE
0015 15 PSI
0025 25 PSI
0050 50 PSI
0075 75 PSI
0100 100 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD47
MECHANICAL DIRECTIONAL CONTROLS

SL-CPD PILOT TO CLOSE CHECK VALVE, POPPET

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, pilot to close, poppet check valve.

OPERATION
The SL-CPD allows free flow from (3) to (2), and blocks flow from (2) to (3). Flow will be blocked from (3) to (2)
when sufficient pressure is applied at (1). The cartridge has a 2:1 pilot ratio, meaning that at least one half of
the load pressure held at (3) is required at (1) to close the valve. The check is spring biased to assure holding in
static or no-load conditions.

FEATURES
• Hardened seat for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Special higher bias spring values available.
Consult factory.

PERFORMANCE Flow (LPM) VALVE SPECIFICATIONS

0 25 50 75 100 125 150
Actual
450 Test Data (Cartridge Only) 30
Nominal Flow 20 GPM (76 LPM)
400 Rated Operating Pressure 3500 PSI (241 bar)
350 Flow (LPM) 25
Typical Internal Leakage (150 SSU) 5 drops/min
Drop (PSI)

Pressure Drop (bar)

300 0 25 50 75 100 125 150

20 Pilot Ratio 2:1
450
250 30
15 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
400
200
Pressure DropPressure

350
150 25 Filtration ISO 18/16/13
(PSI)

10
Pressure Drop (bar)

300
100 20
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
5
50
250 Weight .68 lbs (.31 kg)
0
200 0 15 Operating Fluid Media General Purpose Hydraulic Fluid
1500 5 10 15 20 25 30 35 40 10 Cartridge Torque Requirements 90 ft-lbs (122 Nm)
100 Flow (GPM)
5 Cavity SUPER 3WS
50 Port 3 to 2
Cavity Form Tool (Finishing) 40500021
0 0
0 5 10 15 20 25 30 35 40 Seal Kit 21191404
Flow (GPM)
Port 3 to 2

without independent study, evaluation, and testing for suitability.

Page MD48
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: 1.89 lbs (.86 kg)

ORDERING INFORMATION

SL-CPD – – –

OPTIONS BODIES
Buna, 2:1 Ratio 02 Blank Without Body
Viton, 2:1 Ratio V2 S #12 SAE Ports

CRACK RESSURE
0015 15 PSI
0025 25 PSI
0050 50 PSI
0075 75 PSI
0100 100 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD49
MECHANICAL DIRECTIONAL CONTROLS

DE-CVT DIRECT ACTING CHECK VALVE THERMAL RELIEF, POPPET

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, direct acting check valve with thermal relief.

OPERATION
The DE-CVT allows free flow passage from (2) to (1), and blocks flow from (1) to (2). If the pressure at (1)
exceeds the thermal relief valve setting, a small amount of oil will be allowed to pass from (1) to (2), preventing
cylinder damage from excessive pressure. The cartridge has a fully guided poppet, which is spring biased closed
until sufficient pressure is applied at (2) to open to (1).
Note: the relief valve feature is not intended for use in dynamic pressure limiting applications. Consult factory.

FEATURES
• Hardened parts for long life.
• Optional bias springs for backpressure application flexibility.
• Fully guided poppet assembly.
• Industry common cavity.

Nominal flow rating is 15 GPM for free flow port (2) to (1).
Consult chart for free flow differential pressure.
Thermal relief is cyclic rated to 0.1 GPM. Port (1) to (2)
chart demonstrates override characteristics for a typical
thermal relief application.

PERFORMANCE HYDRAULIC SYMBOL

Actual Test Data (Cartridge Only)

Flow (LPM)
Flow (LPM)
0 0 0.5 0.5 1 1 1.5 1.5
35003500

30003000 200 200

Pressure Drop (PSI)
Pressure Drop (PSI)

Pressure Drop (bar)

25002500
Pressure Drop (bar)

150
2000 150
2000
1500 100
1500 100
1000
1000 50
500
50
0 500 0 VALVE SPECIFICATIONS
0.0 0 0.1 0.2 0.3 0.4 0.5 0
Flow (GPM)
0.0 0.1 0.2 0.3 0.4 0.5 Nominal Flow 15 GPM (57 LPM)
Port 1 to Flow
2 (GPM)
Rated Operating Pressure 4000 PSI (276 bar)
Port 1 to 2
Flow (LPM ) Typical Internal Leakage (150 SSU) 0-10 drops/min
0 25 50 75
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
125 Flow (LPM )
0 25 50 75 Filtration ISO 18/16/13
100
Pressure Drop (PSI)

Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

Pressure Drop (bar)

125
75 5
100 Weight .31 lbs (.14 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

50 Operating Fluid Media General Purpose Hydraulic Fluid

75 5
25 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
50 Cavity DELTA 2W
0 0
0 5 10 15 20
25 F low (GP M ) Cavity Form Tool (Finishing) 40500000
Port 2 to 1 Seal Kit 21191200
0 0
0 5 10 15 20
F low (GP M )
Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD50
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-CVT – – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
S #8 SAE Ports
PRESSURE SETTING
1000 PSI 1 VOLTAGE
2000 PSI 2 0020 20 PSI
3000 PSI 3 0100 100 PSI
4000 PSI 4 ± 10%

WARNING
DO NOT USE ALUMINUM BODY
HIGH PRESSURE (4000 PSI) PRODUCT
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 7 / 2017

without independent study, evaluation, and testing for suitability.

Page MD51
MECHANICAL DIRECTIONAL CONTROLS

QS-CBS COUNTERBALANCE VALVE, 3:1 RATIO

DESCRIPTION
M20 X 1.5 thread, counterbalance valve, 3:1 ratio.

OPERATION
The QS-CBS check valve allows free flow from the directional valve (2) to the load (1) while a direct-acting, pilot-
assisted relief valve controls flow from port (3) to port (2). Pilot assist at port 1 lowers the effective setting of the
relief valve at a rate determined by the pilot ratio (3:1).

FEATURES
• Hardened parts for long life.
• Industry common metric cavity.

Counterbalance valves with pilot assist are meant

HYDRAULIC SYMBOL to control an overrunning load. Other names for
this valve include motion control valve and over
(2) center valve.

(1)

(3)

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
Rated Operating Pressure 4000 PSI (276 bar)
Typical Internal Leakage
(150 SSU) 0-10 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .33 lbs (.15 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Cavity QS SPECIAL 3W
Cavity Form Tool (Finishing) 40500012
Seal Kit 21170016

without independent study, evaluation, and testing for suitability.

Page MD52
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: 2.46 lbs (1.11 kg)

ORDERING INFORMATION

QS-CBS – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
N 1/2” NPT Ports

PRESSURE RANGE/SETTING
1500 400-1500 PSI
4000 1000-4000 PSI

without independent study, evaluation, and testing for suitability.

Page MD53
MECHANICAL DIRECTIONAL CONTROLS

without independent study, evaluation, and testing for suitability.

Page MD54
MECHANICAL DIRECTIONAL CONTROLS

2 WAY 2 POSITION MANUAL VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

12 3500 45 241 3/4-16 PB-MCA MD56

15 3500 57 241 7/8-14 DE-MCA MD58

20 1500 76 103 7/8-14 DE-MCF MD60

20 3500 76 241 7/8-14 DE-MCS MD62

20 3500 76 241 7/8-14 DE-MCB MD64

8 3500 30 241 3/4-16 PB-MCI MD66

8 3500 30 241 3/4-16 PB-MCL MD68

15 3500 57 241 7/8-14 DE-MCL MD70

20 3000 76 207 7/8-14 DE-M2G MD72

1 4000 4 276 3/4-16 HB-MCP MD74

TYPICAL SCHEMATIC

Typical application for MCA, MCB, MCF, MCL, and MCS is an emergency lowering device. Typical application for the MCI is a selector circuit
when load holding is required in both directions. Typical application for the M2G is adjustable speed control or full bypass of fluid motor. Typical
application for the MCP is a pilot dump valve.

(2) (2)
(2) (1)

(2) (1) (1)

(1)

(1)
(2)

without independent study, evaluation, and testing for suitability.

Page MD55
MECHANICAL DIRECTIONAL CONTROLS

PB-MCA MANUAL POPPET VALVE, 2 WAY NORMALLY CLOSED, PULL TYPE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, manual poppet, 2 way normally closed, pull type valve.

OPERATION
The PB-MCA blocks flow from (1) to (2) until an operator pulls the shaft outward. The bias spring (see option page
for pressure) allows for backpressure at (2) before the valve will open.
Note: pressure at port (2) will act directly on the poppet and spring. Port (2) is intended to be a tank port only.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
• Optional bias springs for backpressure application flexibility.

75 PSI bias provides comfortable effort where

HYDRAULIC SYMBOL return line is near zero. 150 PSI option may be
difficult to pull, if tank pressure is near zero.
Pressure above SPRING BIAS PRESSURE at port
(2) may cause valve to self open.

Flow (LPM)
0 10 20 30 40
80
70 5
Pressure Drop (PSI)

60
Pressure Drop (bar)

4
PERFORMANCE
50 VALVE SPECIFICATIONS
3
40
Actual
30
Test Data (Cartridge Only) Nominal Flow 12 GPM (45 LTR/M)
2
20
Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) 1
10 Typical Internal Leakage (150 SSU) 0-5 drops/min
0 10 20 30 40
0 0 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
80
0 2 4 6 8 10 12
5 Filtration ISO 18/16/13
70 Flow (GPM)
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

60
Pressure Drop (bar)

Port 2 to 1 (detent open) 4

Weight .21 lbs (.10 kg)
50
3 Operating Fluid Media General Purpose Hydraulic Fluid
40
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
30 2
Cavity POWER 2W
20
1 Cavity Form Tool (Finishing) 40500005
10
Seal Kit 21191100
0 0
0 2 4 6 8 10 12
Flow (GPM)

Port 2 to 1 (detent open)

without independent study, evaluation, and testing for suitability.

Page MD56
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-MCA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPT Ports
Buna, Screen A0 S #6 SAE Ports
Viton, Screen W0
Buna, Knob 0K
Viton, Knob VK
Buna, Knob, Screen AK SPRING BIAS PRESSURE
Viton , Knob, Screen WK 0075 75 PSI
Buna, Detent 0D 0150 150 PSI
Viton, Detent VD
Buna, Screen, Detent AD Note: pressure above SPRING BIAS PRESSURE
Viton, Screen, Detent WD at port (2) may cause valve to self open.
Buna, Knob, Detent 1D
Viton, Knob, Detent 2D
Buna, Knob, Screen, Detent 3D
Viton, Knob, Screen, Detent 4D

Note: use screen only if flow direction

is from (1) to (2).

without independent study, evaluation, and testing for suitability.

Page MD57
MECHANICAL DIRECTIONAL CONTROLS

DE-MCA MANUAL POPPET VALVE, 2 WAY NORMALLY CLOSED, PULL TYPE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, manual poppet valve, 2 way normally closed, pull type.

OPERATION
The DE-MCA blocks flow from (1) to (2) until an operator pulls the shaft outward. The bias spring allows for
backpressure at (2) before the valve will open (see option page for pressure).
Note: pressure at port (2) will directly act on the poppet and spring. Port (2) is intended to be a tank port only.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
• Optional bias springs for backpressure application flexibility.

HYDRAULIC SYMBOL 65 PSI bias provides comfortable effort where

return line is near zero. 160 PSI option may be
difficult to pull, if tank pressure is near zero.

Flow (LPM)
0 25 50 75
125
Pressure Drop (PSI)

100
Pressure Drop (bar)

75 5
PERFORMANCE VALVE SPECIFICATIONS
50

Actual
25 Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
0 Flow (LPM) 0
00 5 10 15 50 20 Typical Internal Leakage (150 SSU) 5 drops/min
25 75
125 Flow (GPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Port 2 to 1 (valve held open) Filtration ISO 18/16/13
Pressure Drop (PSI)

100
Pressure Drop (bar)

Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

75 5 Weight .18 lbs (.08 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
50
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
25 Cavity DELTA 2W
0 0 Cavity Form Tool (Finishing) 40500000
0 5 10 15 20 Seal Kit 21191200
Flow (GPM)
Port 2 to 1 (valve held open)

without independent study, evaluation, and testing for suitability.

Page MD58
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-MCA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Screen A0 S #8 SAE Ports
Viton, Screen W0
Buna, Knob 0K
Viton, Knob VK
Buna, Knob, Screen AK SPRING BIAS PRESSURE
Viton, Knob, Screen WK 0065 65 PSI
0160 160 PSI
Note: use screen only if flow direction
is from (1) to (2). Note: pressure above SPRING BIAS PRESSURE
at port (2) may cause valve to self open.

without independent study, evaluation, and testing for suitability.

Page MD59
MECHANICAL DIRECTIONAL CONTROLS

DE-MCF MANUAL POPPET VALVE, 2 WAY NORMALLY CLOSED, PULL TYPE, SOFT SEAT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, manual poppet valve, 2 way normally closed, pull type, soft seat.

OPERATION
The DE-MCF blocks flow from (1) to (2) until an operator pulls the shaft outward. The bias spring allows for
backpressure at (2) before the valve will open (see option page for pressure).
Note: pressure at port (2) will directly act on the spool and spring. Port (2) is intended to be a tank port only.

FEATURES
• Soft seat for ultra low leakage.
• Industry common cavity.

HYDRAULIC SYMBOL
Pressure above SPRING BIAS PRESSURE at port
(2) may cause valve to self open.

Flow (LPM)
0 25 50 75
125

100
Pressure Drop (PSI)

Pressure Drop (bar)

75 5
PERFORMANCE VALVE SPECIFICATIONS
50

Actual25Test Data (Cartridge Only) Nominal Flow 20 GPM (76 LPM)

Rated Operating Pressure 1500 PSI (103 bar)
0 Flow (LPM) 0 Typical Internal Leakage (150 SSU) Neglibile
0 5 10 15 20
0 25 50 75 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Flow (GPM)
125
Port 2 to 1 (valve held open)
Filtration ISO 18/16/13
Media Operating Temp. Range -32° to 160°F (0° to 70°C)
Pressure Drop (PSI)

100
Pressure Drop (bar)

Weight .14 lbs (.06 kg)

75 5
Operating Fluid Media General Purpose Hydraulic Fluid
50 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
25 Cavity DELTA 2W
Cavity Form Tool (Finishing) 40500000
0 0
Seal Kit 21191200
0 5 10 15 20
Flow (GPM)
Port 2 to 1 (valve held open)

without independent study, evaluation, and testing for suitability.

Page MD60
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-MCF – – –

Note: use screen only if flow direction Note: pressure above SPRING BIAS PRESSURE
is from (1) to (2). at port (2) may cause valve to self open.

without independent study, evaluation, and testing for suitability.

Page MD61
MECHANICAL DIRECTIONAL CONTROLS

DE-MCS MANUAL POPPET VALVE, 2 WAY NORMALLY CLOSED, PULL TYPE, CORROSION RESISTANT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, manual poppet valve, 2 way normally closed, pull type, corrosion resistant.

OPERATION
The DE-MCS blocks flow from (1) to (2) until an operator pulls the shaft outward. The bias spring allows for
backpressure at (2) before the valve will open (see option page for pressure).
Note: pressure at port (2) will directly act on the spool and spring. Port (2) is intended to be a tank port only.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
• Corrosion resistant.
• Optional bias springs for backpressure application flexibility.

65 PSI bias provides comfortable effort where

HYDRAULIC SYMBOL return line is near zero. 160 PSI option may be
difficult to pull, if tank pressure is near zero.
Stainless Steel Shaft. Pressure above SPRING
BIAS PRESSURE at port (2) may cause valve to
self open.

PERFORMANCE Flow (LPM) VALVE SPECIFICATIONS

0 25 50 75
Actual
125Test Data (Cartridge Only) Nominal Flow 20 GPM (76 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
100
Typical Internal Leakage (150 SSU) 0-5 drops/min
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (LPM)
75 0 25 50 5 75 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
125 Filtration ISO 18/16/13
50
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
100
Pressure Drop (PSI)

Pressure Drop (bar)

25 Weight .75 lbs (.34 kg)

75
0 0 5 Operating Fluid Media General Purpose Hydraulic Fluid
0 5 10 15 20 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
50 Flow (GPM) Cavity DELTA 2W
Port 2 to 1 (valve held open)
25
Cavity Form Tool (Finishing) 40500000
Seal Kit 21191200
0 0
0 5 10 15 20
Flow (GPM)

Port 2 to 1 (valve held open)

without independent study, evaluation, and testing for suitability.

Page MD62
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-MCS – – –

without independent study, evaluation, and testing for suitability.

Page MD63
MECHANICAL DIRECTIONAL CONTROLS

DE-MCB MANUAL POPPET VALVE, 2 WAY NORMALLY CLOSED, PULL, DETENT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, manual poppet valve, 2 way normally closed, pull with detent.

OPERATION
The DE-MCB blocks flow from (1) to (2) until an operator pulls the shaft outward. The bias spring allows for
backpressure at (2) before the valve will open (see option page for pressure).
Note: pressure at port (2) will directly act on the spool and spring. Port (2) is intended to be a tank port only.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
• Optional bias springs for backpressure application flexibility.

HYDRAULIC SYMBOL 65 PSI bias provides comfortable effort where

return line is near zero. 160 PSI option may be
difficult to pull, if tank pressure is near zero.
Pressure above SPRING BIAS PRESSURE at port
(2) may cause valve to self open.

Flow (LPM)
0 25 50 75
125

PERFORMANCE
100 VALVE SPECIFICATIONS
Pressure Drop (PSI)

Pressure Drop (bar)

Actual
75 Test Data (Cartridge Only) 5 Nominal Flow 20 GPM (76 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
50 Flow (LPM)
Typical Internal Leakage (150 SSU) 5 drops/min
0 25 50 75
25
125 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 0
Filtration ISO 18/16/13
1000 5 10 15 20 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (GPM) Weight .28 lbs (.13 kg)

75 Port 2 to 1 (detent open) 5
Operating Fluid Media General Purpose Hydraulic Fluid
50 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Cavity DELTA 2W
25 Cavity Form Tool (Finishing) 40500000
Seal Kit 21191200
0 0
0 5 10 15 20
Flow (GPM)

Port 2 to 1 (detent open)

without independent study, evaluation, and testing for suitability.

Page MD64
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-MCB – – –

without independent study, evaluation, and testing for suitability.

Page MD65
MECHANICAL DIRECTIONAL CONTROLS

PB-MCI MANUAL POPPET VALVE, 2 WAY NORMALLY CLOSED, PUSH TYPE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, manual poppet, 2 way normally closed, push type valve.

OPERATION
The PB-MCI blocks flow from (2) to (1) until sufficient force is applied to button to overcome spring bias and load
force.
Actuation Force Required
No Pressure 7 lbs
Side Pressure 7 + (P1 x .009)
Nose Pressure 7 + (P1 x .076)

Note: (Ø .437) cavity predrill depth must be 1.312 minimum from spotface.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 5 10 15 20 25 30 35
200
PERFORMANCE VALVE SPECIFICATIONS
Pressure Drop (PSI)

Pressure Drop (bar)

150 10
Actual Test Data (Cartridge Only) Nominal Flow 8 GPM (30 LPM)
100 Rated Operating Pressure 3500 PSI (241 bar)
5 Typical Internal Leakage (150 SSU) Consult Factory
50 Flow (LPM)
0 5 10 15 20 25 30 35 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200
0 0 Filtration ISO 18/16/13
0 2 4 6 8 10
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (GPM)
150 10
Port 2 to 1 (lever held open)
Weight .26 lbs (.12 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
100
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
5
50 Cavity POWER 2W
Cavity Form Tool (Finishing) 40500005
0 0 Seal Kit 21191102
0 2 4 6 8 10
Flow (GPM)
Port 2 to 1 (lever held open)

without independent study, evaluation, and testing for suitability.

Page MD66
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-MCI – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Screen A0 S #6 SAE Ports
Viton, Screen W0
Buna, Lever 0L
Viton, Lever VL
Buna, Screen, Lever AL
Viton, Screen, Lever WL

Note: use screen only if flow direction

is from (1) to (2).

without independent study, evaluation, and testing for suitability.

Page MD67
MECHANICAL DIRECTIONAL CONTROLS

PB-MCL MANUAL POPPET VALVE, 2 WAY NORMALLY CLOSED, PULL TYPE, LEVER

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, manual poppet, 2 way normally closed, pull type valve with lever.

OPERATION
The PB-MCL blocks flow from (1) to (2) until an operator pulls the handle upward. The bias spring (see option
page for pressure) allows for backpressure at (2) before the valve will open.
Note: Pressure at port (2) will directly act on the spool and spring. Port (2) is intended to be a tank port only.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Pressure above SPRING BIAS PRESSURE at port
(2) may cause valve to self open.

Flow (LPM)
0 5 10 15 20 25 30
80
70 5
PERFORMANCE VALVE SPECIFICATIONS
Pressure Drop (PSI)

60
Pressure Drop (bar)

4
50
Actual Test Data (Cartridge Only) 3
Nominal Flow 8 GPM (30 LTR/M)
40
Rated Operating Pressure 3500 PSI (241 bar)
30 Flow (LPM) 2
Typical Internal Leakage (150 SSU) 0-5 drops/min
20 0 5 10 15 20 25 30
1 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
10 80
5 Filtration ISO 18/16/13
0 70 0
060 2 4 6 8 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

4
Flow (GPM) Weight .33 lbs (.15 kg)
50
Port 2 to 1 (detent open) 3 Operating Fluid Media General Purpose Hydraulic Fluid
40
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
30 2
Cavity POWER 2W
20
1 Cavity Form Tool (Finishing) 40500005
10
Seal Kit 21191101
0 0
0 2 4 6 8
Flow (GPM)

Port 2 to 1 (detent open)

without independent study, evaluation, and testing for suitability.

Page MD68
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-MCL – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPT Ports
Buna, Screen A0 S #6 SAE Ports
Viton, Screen W0

Note: use screen only if flow direction

is from (1) to (2). SPRING BIAS PRESSURE
0075 75 PSI
0150 150 PSI

Note: pressure above SPRING BIAS PRESSURE

at port (2) may cause valve to self open.

without independent study, evaluation, and testing for suitability.

Page MD69
MECHANICAL DIRECTIONAL CONTROLS

DE-MCL NORMALLY CLOSED MANUAL, PULL VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, normally closed, manual pull valve.

OPERATION
The DE-MCL blocks flow from (1) to (2) until an operator pulls the shaft outward. The bias spring allows for
backpressure at (2) before the valve will open (see option page for pressure).
Note: pressure at port (2) will directly act on the spool and spring. Port (2) is intended to be a tank port only. The
cartridge offers smooth transition in response to load changes in common hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Pressure above SPRING BIAS PRESSURE at port
(2) may cause valve to self open.

Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55
150 10

PERFORMANCE VALVE SPECIFICATIONS

Pressure Drop (PSI)

Pressure Drop (bar)

100
Actual Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
5
Rated Operating Pressure 3500 PSI (241 bar)
50 Flow (LPM) Typical Internal Leakage (150 SSU) 5 drops/min (82 ml/min)
0 5 10 15 20 25 30 35 40 45 50 55 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
150 10 Filtration ISO 18/16/13
0 0
0 5 10 15 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (GPM) Weight .15 lbs (.07 kg)

100
Port 2 to 1 (detent open) Operating Fluid Media General Purpose Hydraulic Fluid
5 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
50 Cavity DELTA 2W
Cavity Form Tool (Finishing) 40500000
Seal Kit 21191201
0 0
0 5 10 15
Flow (GPM)

Port 2 to 1 (detent open)

without independent study, evaluation, and testing for suitability.

Page MD70
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-MCL – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Screen A0 S #8 SAE Ports
Viton, Screen W0

Note: use screen only if flow direction

is from (1) to (2). SPRING BIAS PRESSURE
0065 65 PSI
0160 165 PSI

Note: pressure above SPRING BIAS PRESSURE

at port (2) may cause valve to self open.

without independent study, evaluation, and testing for suitability.

Page MD71
MECHANICAL DIRECTIONAL CONTROLS

DE-M2G MANUAL ROTARY SPOOL VALVE, 2 WAY NORMALLY CLOSED

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, manual rotary spool valve, 2 way normally closed.

OPERATION
The DE-M2G when rotated clockwise (fully closed position) blocks flow from (1) to (2) and (2) to (1). When rotated
counterclockwise (fully open position), the cartridge allows flow from (1) to (2) and (2) to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL May be used as a metering product. Valve has

approximately 3.5 turns of adjustment from
fully open to fully closed. See Chart for fully open
pressure drop.

Flow (LPM)
0 25 50 75
100
Pressure Drop (PSI)

Pressure Drop (bar)

75 5
PERFORMANCE VALVE SPECIFICATIONS
50
Actual Test Data (Cartridge Only) Nominal Flow 20 GPM (76 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
25
Flow (LPM)
Typical Internal Leakage (150 SSU) 5 cu/in per min (82 ml/min)
0 25 50 75 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 0
1000 5 10 15 20
Filtration ISO 18/16/13
Flow (GPM) Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .27 lbs (.12 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

75 Port 1 to 2 5
Operating Fluid Media General Purpose Hydraulic Fluid
50 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Cavity DELTA 2W
25 Cavity Form Tool (Finishing) 40500000
Seal Kit 21191202
0 0
0 5 10 15 20
Flow (GPM)

Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MD72
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-M2G – –

Note: use screen only if flow direction

is from (1) to (2).

without independent study, evaluation, and testing for suitability.

Page MD73
MECHANICAL DIRECTIONAL CONTROLS

HB-MCP 2 WAY MANUAL VALVE, NORMALLY CLOSED, PUSH TYPE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, manual valve, 2 way normally closed, push type.

OPERATION
The HB-MCP blocks flow from (2) to (1) until an operator pushes the knob in allowing pressure at port #2 to
drop to port #1 pressure.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Good as a pilot dump valve. Port #1 should be
limited to <500 PSI to allow actuation (50 lbs),
Port #2 actuation load at 4000 PSI (50 lbs).

Flow (LPM)
0 1 2 3
4000
3500 250

PERFORMANCE VALVE SPECIFICATIONS

Pressure Dro p (PSI)

3000
Pressure Drop (bar)

200
2500
Actual Test Data (Cartridge Only) 150 Nominal Flow 1 GPM (4 LPM)
2000
Max. Operating Pressure 4000 PSI (276 bar)
1500 Flow (LPM) 100
1000
Typical Internal Leakage (150 SSU) 5 drops/min
0 1 2 3 50
500 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
4000
0 0 250 Filtration ISO 18/16/13
3500 0 0.2 0.4 0.6 0.8 1
Media Operating Temp. Range 32° to 160°F (0° to 70°C)
Pressure Dro p (PSI)

3000
Pressure Drop (bar)

Flow (GPM) 200 Weight .14 lbs (.06 kg)

2500 - Port 2 to 1
150 Operating Fluid Media General Purpose Hydraulic Fluid
2000
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
1500 100 Cavity POWER 2W
1000 Cavity Form Tool (Finishing) 40500005
50
500 Seal Kit 21191100
0 0
0 0.2 0.4 0.6 0.8 1
Flow (GPM)

- Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD74
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

HB-MCP – –

OPTIONS BODIES
Buna, Knob 0K Blank Without Body
Viton, Knob VK N 1/4” NPTF Ports
S #6 SAE Ports

Note: aluminum NOT durability rated for 4000 PSI.

Consult factory for options.

without independent study, evaluation, and testing for suitability.

Page MD75
MECHANICAL DIRECTIONAL CONTROLS

without independent study, evaluation, and testing for suitability.

Page MD76
MECHANICAL DIRECTIONAL CONTROLS

PILOT TO SHIFT VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

10 4000 38 276 7/8-14 HG-PDA MD78

10 4000 38 276 7/8-14 HG-PDC MD80

10 3000 38 207 7/8-14 HG-PDI MD82

10 4000 38 276 7/8-14 HG-PDO MD84

10 4000 38 276 7/8-14 HF-PDE MD86

10 3000 38 207 7/8-14 HF-PDI MD88

40 3500 151 241 1 5/16 SO-PTS MD90

40 3500 151 241 1 5/16 SO-PTT MD92

without independent study, evaluation, and testing for suitability.

Page MD77
MECHANICAL DIRECTIONAL CONTROLS

HG-PDA PILOTED DIRECTIONAL VALVE, 4 WAY NORMALLY CLOSED

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 4 way piloted directional valve.

OPERATION
The HG-PDA in neutral (un-piloted), allows flow between (2) and (1) bi-directionally, while blocking at (3). The
spring chamber is constantly vented at (1). On attainment of a predetermined pressure at (4), the cartridge
redirects flow from (2) to (1), to (2) to (3).
1
Note: that the backpressure value at (1) must be added to the selected pressure setting to determine pilot
pressure necessary to shift valve to second position.
2
FEATURES
• Hardened parts for long life.
3 • Industry common cavity
1

HYDRAULIC SYMBOL
3 .030 to .060 diameter orifice recommended
beneath port (4).

Flow (LPM)
PERFORMANCE 0 10 20 30 40 VALVE SPECIFICATIONS
Actual Test200
Data (Cartridge Only) Nominal Flow 10 GPM (38 LTR/M)
Rated Operating Pressure 4000 PSI (276 bar)
Pressure Drop (BAR)
Pressure Drop (PSI)

150 Flow (LPM) Typical Internal Leakage (150 SSU) 8 cu in/min (82 ml/min)
10
0 10 20 30 40 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200 Filtration ISO 18/16/13
100
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (BAR)

Weight 5
Pressure Drop (PSI)

150 .63 lbs (.28 kg)

10
50 Operating Fluid Media General Purpose Hydraulic Fluid
100 Cartridge Torque Requirements 40 ft-lbs (40.6 Nm)
Cavity DELTA 4W
0 5 0
Cavity Form Tool (Finishing) 40500002
50 0 2 4 6 8 10 12
Seal Kit 21191214
Flow (GPM)
0 0
0 2 4 Port
6 2 to 38 Port
10 2 to 1 12
Flow (GPM)

Port 2 to 3 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD78
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

.81
[20.6]
1.50
[38.1]
1.00 HEX
[25.4]
1.25
[31.8]

.72
.75 [18.3]
[19.1]
.63
[15.9]
1.38
[34.9]
2.00
[50.8]
2.88
7/8-14 UNF - 2A 3.25 [73.2]
2.46 [82.6]
[62.4]
#6 SAE PORTS
4X

Ø.28
[7.1]
.13 2.25 MTG. HOLES
[3.3] [57.1] 2X
2.50
[63.5]
Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

HG-PDA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

PRESSURE SETTINGS
0040 40 PSI
0080 80 PSI
0160 160 PSI

without independent study, evaluation, and testing for suitability.

Page MD79
MECHANICAL DIRECTIONAL CONTROLS

HG-PDC PILOTED DIRECTIONAL VALVE, 2 WAY NORMALLY CLOSED

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 2 way normally closed piloted directional valve.

OPERATION
The HG-PDC in neutral (unpiloted), blocks flow between (2) and (3). The spring chamber is constantly vented at
(1). On attainment of a predetermined pressure at (4), the cartridge allows flow from (2) to (3).

1 Note: that the backpressure value at (1) must be added to the selected pressure setting to determine pilot
pressure necessary to shift valve to second position.

FEATURES
1 2 • Hardened parts for long life.
• Industry common cavity
2 3

HYDRAULIC SYMBOL
.030 to .060 diameter orifice recommended
beneath port (4).

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
Rated Operating Pressure 4000 PSI (276 bar)
Flow (LPM)
Flow (LPM) Typical Internal Leakage (150 SSU) 8 cu in/min (82 ml/min)
00 10 10 20 20 30 30 40 40
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200
200 Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (BAR)

Pressure Drop (BAR)

Pressure Drop (PSI)
Drop (PSI)

150
150 10 Weight .63 lbs (.28 kg)
10
Operating Fluid Media General Purpose Hydraulic Fluid

100 Cartridge Torque Requirements 40 ft-lbs (40.6 Nm)

100 Cavity DELTA 4W
5
Pressure

Cavity
5 Form Tool (Finishing) 40500002
50
Seal Kit 21191214
50
0 0
00 2 4 6 8 10 12 0
0 2 Flow
4 (GPM)6 8 10 12
Port 2Flow
to 3 (GPM)

Port 2 to 3
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 7 / 2017

without independent study, evaluation, and testing for suitability.

Page MD80
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

.81
[20.6]
1.50
[38.1]
1.00 HEX
[25.4]
1.25
[31.8]

.72
.75 [18.3]
[19.1]
.63
[15.9]
1.38
[34.9]
2.00
[50.8]
2.88
7/8-14 UNF - 2A 3.25 [73.2]
2.46 [82.6]
[62.4]
#6 SAE PORTS
4X

Ø.28
[7.1]
.13 2.25 MTG. HOLES
[3.3] [57.1] 2X
2.50
[63.5]
Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

HG-PDC – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

PRESSURE SETTINGS
0040 40 PSI
0080 80 PSI
0160 160 PSI

without independent study, evaluation, and testing for suitability.

Page MD81
MECHANICAL DIRECTIONAL CONTROLS

HG-PDI PILOTED DIRECTIONAL VALVE, 3 WAY NORMALLY OPEN

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 3 way normally open piloted directional valve.

OPERATION
The HG-PDI in neutral (un-piloted), allows flow between (3) and (2) bi-directional, while blocking at (4). The spring
chamber is constantly vented at (1). On attainment of a predetermined pressure at (4), the cartridge shifts to close
(3) to (2), while opening (4) to (3).
1
Note: that the backpressure value at (1) must be added to the selected pressure setting to determine pilot
pressure necessary to shift valve to second position.
2
FEATURES
• Hardened parts for long life.
3 • Industry common cavity

HYDRAULIC SYMBOL

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Flow Flow
(LPM)(LPM) Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
00 5 10 10 15 20 20
25 30 30
35 40 45 40 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200
2000
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (BAR)

Pressure Drop (BAR)

(PSI)

1500
Drop(PSI)

150 100 Weight .63 lbs (.28 kg)

10
Operating Fluid Media General Purpose Hydraulic Fluid
Drop

1000 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)

100
Pressure

Cavity DELTA 4W
50
Pressure

Cavity
5 Form Tool (Finishing) 40500002
500
Seal Kit 21191214
50
0 0
0 2 4 6 8 10 12
0 0
Flow (GPM)
0 2 4 6 8 10 12
Port 4 to 3 Port 2 to 3
Flow (GPM)

without independent study, evaluation, and testing for suitability.

Page MD82
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

.81
[20.6]
1.50
[38.1]
1.00 HEX
[25.4]
1.25
[31.8]

.72
.75 [18.3]
[19.1]
.63
[15.9]
1.38
[34.9]
2.00
[50.8]
2.88
7/8-14 UNF - 2A 3.25 [73.2]
2.46 [82.6]
[62.4]
#6 SAE PORTS
4X

Ø.28
[7.1]
.13 2.25 MTG. HOLES
[3.3] [57.1] 2X
2.50
[63.5]
Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

HG-PDI – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

PRESSURE SETTINGS
0055 55 PSI
0080 80 PSI
0160 160 PSI

without independent study, evaluation, and testing for suitability.

Page MD83
MECHANICAL DIRECTIONAL CONTROLS

HG-PDO PILOTED DIRECTIONAL VALVE, 2 WAY NORMALLY OPEN

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 2 way normally open piloted directional valve.

OPERATION
The HG-PDO in neutral (un-piloted), allows flow between (2) and (3) bi-directionally.
The spring chamber is constantly vented at (1). On attainment of a predetermined pressure at (4), the cartridge
blocks flow from (2) to (3).
1
Note: that the backpressure value at (1) must be added to the selected pressure setting to determine pilot
pressure necessary to shift valve to second position.
2
FEATURES
• Hardened parts for long life.
3 • Industry common cavity

HYDRAULIC SYMBOL
.030 to .060 diameter orifice recommended
beneath port (4).

Flow (LPM)
PERFORMANCE 0 10 20 30 40 VALVE SPECIFICATIONS
Actual Test200
Data (Cartridge Only) Nominal Flow 10 GPM (38 LTR/M)
Rated Operating Pressure 4000 PSI (276 bar)
Pressure Drop (BAR)

Flow (LPM)
Pressure Drop (PSI)

150 Typical Internal Leakage (150 SSU) 8 cu in/min (82 ml/min)

0 10 20 30 40 10
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
150 10 Filtration ISO 18/16/13
100
125 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (BAR)
Pressure Drop (PSI)

Weight 5 .62 lbs (.28 kg)

100
50 Operating Fluid Media General Purpose Hydraulic Fluid
75 5
Cartridge Torque Requirements 40 ft-lbs (40.6 Nm)
Cavity DELTA 4W
50
0 0
Cavity Form Tool (Finishing) 40500002
0 2 4 6 8 10 12
25 Seal Kit 21191214
Flow (GPM)
0 0
Port 2 to 3 Port 2 to 1
0 2 4 6 8 10 12
Flow (GPM)

Port 2 to 3

without independent study, evaluation, and testing for suitability.

Page MD84
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

.81
[20.6]
1.50
[38.1]
1.00 HEX
[25.4]
1.25
[31.8]

.72
.75 [18.3]
[19.1]
.63
[15.9]
1.38
[34.9]
2.00
[50.8]
2.88
7/8-14 UNF - 2A 3.25 [73.2]
2.46 [82.6]
[62.4]
#6 SAE PORTS
4X

Ø.28
[7.1]
.13 2.25 MTG. HOLES
[3.3] [57.1] 2X
2.50
[63.5]
Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

HG-PDO – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

PRESSURE SETTINGS
0040 40 PSI
0080 80 PSI
0160 160 PSI

without independent study, evaluation, and testing for suitability.

Page MD85
MECHANICAL DIRECTIONAL CONTROLS

HF-PDE PILOTED DIRECTIONAL VALVE, NORMALLY CLOSED, EXTERNAL PILOT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, external pilot normally closed, piloted directional valve.

OPERATION
The HF-PDE blocks flow at ports (2) and (1). On attainment of a predetermined pressure at (3) the valve shifts
to a allow flow from (1) to (2).

FEATURES
1 • Hardened parts for long life.
• Industry common cavity

2
1

2 3

3
HYDRAULIC SYMBOL
.030 to .060 diameter orifice recommended
beneath port (3).

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
Flow (LPM)
Rated Operating Pressure 4000 PSI (276 bar)
0 5 10 15 20 25 30 35 40 45 50
Flow (LPM) Typical Internal Leakage (150 SSU) 8 cu in/min (82 ml/min)
200
0 5 10 15 20 25 30 35 40 45 50 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200 Filtration ISO 18/16/13
Pressure Drop (BAR)
Pressure Drop (PSI)

150 10 Range
Media Operating Temp. -40° to 250°F (-40° to 120°C)
Pressure Drop (BAR)
Pressure Drop (PSI)

150 10 Weight .57 lbs (.26 kg)

100 Operating Fluid Media General Purpose Hydraulic Fluid
100 Cartridge Torque Requirements
5 40 ft-lbs (40.6 Nm)
50 5 Cavity DELTA 3W
50 Cavity Form Tool (Finishing) 40500001
0 Seal Kit 0 21191206
0 0
0 2 4
0 6
2 8 4 10 612 8
14
10 12 14
Flow (GPM) Flow (GPM)
Port 1 to 2 Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MD86
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

.75
[19.0]
1.50
[38.1]

1.00 HEX
[25.4]
1.25
[31.8]

#6 SAE PORTS
.75 .72
3X
[18.3]
[19.0]

.62
[15.9]
1.38
[34.8]
2.13
7/8-14 [53.8]
1.84 UNF - 2A
[46.7] 2.50
[63.5]

.13 2.25 .28 [7.1] DIA.

[3.0] [57.1] MTG. HOLES
2X
2.50
[63.5]
Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

HF-PDE – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

PRESSURE SETTINGS
0050 50 PSI
0095 95 PSI
0165 165 PSI

without independent study, evaluation, and testing for suitability.

Page MD87
MECHANICAL DIRECTIONAL CONTROLS

HF-PDI PILOTED DIRECTIONAL VALVE, INTERNAL PILOT AND DRAIN

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, internal pilot and drain, piloted directional valve.

OPERATION
The HF-PDI blocks flow at (3) and allows flow from (2) to (1). On attainment of a predetermined pressure at (3)
the valve shifts to a allow flow from (3) to (2) and block flow at (1).

FEATURES
1 • Hardened parts for long life.
• Industry common cavity

HYDRAULIC SYMBOL

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
Flow (LPM)
Rated Operating Pressure 3000 PSI (207 bar)
0 Flow
5 (LPM)
10 15 20 25 30 35 40 45 50
Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
0 10200 20 30 40
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
2000
Filtration ISO 18/16/13
Pressure Drop (BAR)
Pressure Drop (PSI)

150 10 Range
Media Operating Temp. -40° to 250°F (-40° to 120°C)
Pressure Drop (BAR)
Pressure Drop (PSI)

1500 100 Weight .57 lbs (.26 kg)

100 Operating Fluid Media General Purpose Hydraulic Fluid
1000 Cartridge Torque Requirements
5 30 ft-lbs (40.6 Nm)
50 50 Cavity DELTA 3W
500 Cavity Form Tool (Finishing) 40500001
0 Seal Kit 0 21191206
0 0 2 4 6 80 10 12 14
0 2 4 6 8 10 12
Flow (GPM)
Flow (GPM) Port 1 to 2
Port 3 to 2 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MD88
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

.75
[19.0]
1.50
[38.1]

1.00 HEX
[25.4]
1.25
[31.8]

#6 SAE PORTS
.75 .72
3X
[18.3]
[19.0]

.62
[15.9]
1.38
[34.8]
2.13
7/8-14 [53.8]
1.84 UNF - 2A
[46.7] 2.50
[63.5]

.13 2.25 .28 [7.1] DIA.

[3.0] [57.1] MTG. HOLES
2X
2.50
[63.5]
Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

HF-PDI – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

PRESSURE SETTINGS
0050 50 PSI
00100 100 PSI

without independent study, evaluation, and testing for suitability.

Page MD89
MECHANICAL DIRECTIONAL CONTROLS

SO-PTS PILOT TO SHIFT, 3 WAY VALVE, OPEN TRANSITION

DESCRIPTION
16 size, 1 5/16 -12 thread, “Super” series, pilot to shift, 3 way valve, open transition.

OPERATION
In neutral the SO-PTS allows flow between ports (3) and (4), port (2) is blocked. With application of a remote
pilot signal at (5), the valve’s spool shifts to allow flow between ports (2) and (3), while port (4) is blocked. During
transition ports (2), (3), and (4) are open The spring chamber is vented to the tank through port (1). The vented
spring chamber allows the valve to be fully pressurized at ports (2), (3), and (4) without affecting required pilot
pressure. Pressure at (1) will affect required pilot pressure.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL A rate limiting orifice less than .060” diameter is

recommended at port (5).

Flow (LPM)
0 25 50 75 100 125 150
PERFORMANCE
200
VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 40 GPM (151 LTR/M)
Pressure Drop (BAR)
Pressure Drop (PSI)

150 10 Rated Operating Pressure 3500 PSI (241 bar)

Flow (LPM)
Typical Internal Leakage (150 SSU) 10 cu in/min (164 ml/min)
100 0 25 50 75 100 125 150
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200
5 Filtration ISO 18/16/13
50 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (BAR)
Pressure Drop (PSI)

150 10
Weight 1.11 lbs (.50 kg)
0 0 Operating Fluid Media General Purpose Hydraulic Fluid
100
0 5 10 15 20 25 30 35 40
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Flow (GPM) 5
Cavity SUPER 5W SHORT
50 Port 3 to 4 Port 3 to 2
Cavity Form Tool (Finishing) 40500020
Seal Kit 21191410
0 0
0 5 10 15 20 25 30 35 40
Flow (GPM)

Port 3 to 4 Port 3 to 2

without independent study, evaluation, and testing for suitability.

Page MD90
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: 3.76 lbs (1.62 kg)

ORDERING INFORMATION

SO-PTS – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports

SPRING BIAS
0070 70 PSI
0150 150 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD91
MECHANICAL DIRECTIONAL CONTROLS

SO-PTT PILOT TO SHIFT, 3 WAY VALVE, CLOSED TRANSITION

DESCRIPTION
16 size, 1 5/16 -12 thread, “Super” series, pilot to shift, 3 way valve, closed transition.

OPERATION
In neutral the SO-PTT allows flow between ports (3) and (4), port (2) is blocked. With application of a remote
pilot signal at (5), the valve’s spool shifts to allow flow between ports (2) and (3), while port (4) is blocked. During
transition all ports are closed. The spring chamber is vented to the tank through port (1). The vented spring
chamber allows the valve to be fully pressurized at ports (2), (3), and (4) without affecting required pilot pressure.
Pressure at (1) will affect required pilot pressure.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL A rate limiting orifice less than .060” diameter is

recommended at port (5).

Flow (LPM)
0 25 50 75 100 125 150
150
PERFORMANCE 10 VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 40 GPM (151 LTR/M)
Pressure Drop (PSI)

Pressure Drop (bar)

100
Rated Operating Pressure 3500 PSI (241 bar)
5 Typical Internal Leakage (150 SSU) 10 cu in/min (164 ml/min)
Flow (LPM)
50 0 25 50 75 100 125 150 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
150 10 Filtration ISO 18/16/13
0 0 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

0 5 10 15 20 25 30 35 40
100 Weight 1.08 lbs (.49 kg)
Flow (GPM)
5 Operating Fluid Media General Purpose Hydraulic Fluid
Port 3 to 4 Port 3 to 2
50 Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Cavity SUPER 5W SHORT
Cavity Form Tool (Finishing) 40500020
0 0
0 5 10 15 20 25 30 35 40 Seal Kit 21191410
Flow (GPM)

Port 3 to 4 Port 3 to 2

without independent study, evaluation, and testing for suitability.

Page MD92
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: 3.76 lbs (1.62 kg)

ORDERING INFORMATION

SO-PTT – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports

SPRING BIAS
0070 70 PSI
0150 150 PSI
± 10%

without independent study, evaluation, and testing for suitability.

Page MD93
MECHANICAL DIRECTIONAL CONTROLS

without independent study, evaluation, and testing for suitability.

Page MD94
MECHANICAL DIRECTIONAL CONTROLS

SHUTTLE VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

10 3500 38 241 9/16-18 IM-CSB MD96

6 3500 23 241 3/4-16 PP-CSB MD98

8 3500 30 241 7/8-14 DF-CSB MD100

TYPICAL SCHEMATIC

Typical application for the CSB is to provide load sense to a pressure compensator valve.

(1)

(2)
CSB

(3)

without independent study, evaluation, and testing for suitability.

Page MD95
MECHANICAL DIRECTIONAL CONTROLS

IM-CSB INLINE SHUTTLE VALVE

DESCRIPTION
#6 SAE, inline shuttle valve.

OPERATION
The IM-CSB allows flow from the higher pressure of (1) or (3) to (2). The valve is commonly
used as a load sense to direct oil from the pressure side of a bidirectional hydraulic motor
to a pressure released hydraulic brake.

FEATURES
• Hardened parts for long life.

HYDRAULIC SYMBOL

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow Max 10 GPM (38 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Typical Internal Leakage
(150 SSU) 1 cu in/min (16 ml/min)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .28 lbs (.13 kg)
Operating Fluid Media General Purpose Hydraulic Fluid

without independent study, evaluation, and testing for suitability.

Page MD96
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

ORDERING INFORMATION

IM-CSB –

OPTIONS
Buna Standard 00
Viton Standard V0

without independent study, evaluation, and testing for suitability.

Page MD97
MECHANICAL DIRECTIONAL CONTROLS

PP-CSB SHUTTLE VALVE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, shuttle valve.

OPERATION
The PP-CSB allows flow from the higher pressure of (1) or (3) to (2). The valve is commonly used as a load sense
to direct oil from the pressure side of a bidirectional hydraulic motor to a pressure released hydraulic brake.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
PERFORMANCE
0 5 10 15 20 25 30 VALVE SPECIFICATIONS
200
Actual Test Data (Cartridge Only) Nominal Flow 6 GPM (23 LTR/M)
Rated Operating Pressure 3500 PSI (241 bar)
150
Pressure Drop (PSI)

10
Pressure Drop (bar)

Flow (LPM) Typical Internal Leakage (150 SSU) 1 cu in/min (16 ml/min)
0 5 10 15 20 25 30 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
100
200 Filtration ISO 18/16/13
5 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
50
150
Pressure Drop (PSI)

10 Weight .16 lbs (.07 kg)

Pressure Drop (bar)

Operating Fluid Media General Purpose Hydraulic Fluid

100 0 0 Cartridge Torque Requirements 25 ft-lbs (34 Nm)
0 2 4 6 8 Cavity POWER 3W
5
Flow (GPM) Cavity Form Tool (Finishing) 40500024
50
Port 1 to 2 Port 3 to 2 Seal Kit 21191104
0 0
0 2 4 6 8
Flow (GPM)

Port 1 to 2 Port 3 to 2

without independent study, evaluation, and testing for suitability.

Page MD98
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .56 lbs (.25 kg)

ORDERING INFORMATION

PP-CSB – –

OPTIONS BODIES
Buna, Standard 00 Blank Without Body
Viton, Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

without independent study, evaluation, and testing for suitability.

Page MD99
MECHANICAL DIRECTIONAL CONTROLS

DF-CSB SHUTTLE VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, shuttle valve.

OPERATION
The DF-CSB allows flow from the higher pressure of (1) or (3) to (2). The valve is commonly used as a load sense
to direct oil from the pressure side of a bidirectional hydraulic motor to a pressure-released hydraulic brake.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
PERFORMANCE 0 10 20 30 40 VALVE SPECIFICATIONS
200
Actual Test Data (Cartridge Only) Nominal Flow 8 GPM (30 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Pressure Drop (PSI)

Pressure Drop (bar)

150 Flow (LPM) 10

Typical Internal Leakage (150 SSU) 1 cu in/min (16 ml/min)
0 10 20 30 40
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200
100 Filtration ISO 18/16/13
Pressure Drop (PSI)

Pressure Drop (bar)

150 Media Operating

5 Temp. Range -40° to 250°F (-40° to 120°C)
10
50 Weight .22 lbs (.10 kg)
100 Operating Fluid Media General Purpose Hydraulic Fluid
0 5 Cartridge0Torque Requirements 30 ft-lbs (40.6 Nm)
50 Cavity12
DELTA 3W
0 2 4 6 8 10
Flow (GPM) Cavity Form Tool (Finishing) 40500001
0 0
Port 1 to 82 Port Seal Kit 21191206
0 2 4 6 10 3 to 212
Flow (GPM)
Port 1 to 2 Port 3 to 2

without independent study, evaluation, and testing for suitability.

Page MD100
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-CSB – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

Blank (leave this box blank)

without independent study, evaluation, and testing for suitability.

Page MD101
MECHANICAL DIRECTIONAL CONTROLS

without independent study, evaluation, and testing for suitability.

Page MD102
MECHANICAL DIRECTIONAL CONTROLS

ROTARY VALVES

2W2P GPM PSI LPM BAR CAVITY MODEL PAGE

40 3000 151 207 1 5/16-12 SJ-MRA MD104

3W2P GPM PSI LPM BAR CAVITY MODEL PAGE

12 3000 45 207 7/8-14 DF-M3A MD106

4W2P GPM PSI LPM BAR CAVITY MODEL PAGE

10 3000 38 207 7/8-14 DG-M4A MD108

15 3000 57 207 7/8-14 DG-M4B MD110

12 3000 45 207 7/8-14 DG-M4C MD112

6W2P GPM PSI LPM BAR CAVITY MODEL PAGE

(B)(D)(F)

25 3000 95 207 7/8-14 QS-MRS MD114

(A)(C)(E)

without independent study, evaluation, and testing for suitability.

Page MD103
MECHANICAL DIRECTIONAL CONTROLS

SJ-MRA MANUAL ROTARY SPOOL VALVE, 2 WAY

DESCRIPTION
16 size, 1 5/16-12, “Super” series, manual rotary spool valve.

OPERATION
The SJ-MRA regulates flow from (1) to (2) or (2) to (1). Counter-clockwise Rotation of 90° adjusts valve from fully
closed to fully open.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 25 50 75 100 125 150
200

150
Pressure Drop (PSI)

10
Pressure Drop (bar)

PERFORMANCE VALVE SPECIFICATIONS

100 Test Data (Cartridge Only)

Actual Nominal Flow 40 GPM (151 LTR/M)
5 Rated Operating Pressure 3000 PSI (207 bar)
Flow (LPM) Typical Internal Leakage (150 SSU) 15 cu in/min (246 ml/min)
50
0 25 50 75 100 125 150 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200
0 0 Filtration ISO 18/16/13
0 5 10 15 20 25 30 35 40 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
150
Pressure Drop (PSI)

Flow (GPM) 10 Weight 1.13 lbs (.51 kg)

Pressure Drop (bar)

Port 1 to 2 (valve fully open) Operating Fluid Media General Purpose Hydraulic Fluid
100 Cartridge Torque Requirements 90 ft-lbs (122 Nm)
5 Cavity SUPER 2W
50 Cavity Form Tool (Finishing) 40500017
Seal Kit 21191402
0 0
0 5 10 15 20 25 30 35 40
Flow (GPM)
Port 1 to 2 (valve fully open)

without independent study, evaluation, and testing for suitability.

Page MD104
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: 1.29 lbs (.59 kg)

ORDERING INFORMATION

SJ-MRA – –

OPTIONS BODIES
Buna, Standard 00 Blank Without Body
Viton, Standard V0 N 3/4” NPTF Ports
S #12 SAE Ports

without independent study, evaluation, and testing for suitability.

Page MD105
MECHANICAL DIRECTIONAL CONTROLS

DF-M3A MANUAL ROTARY SPOOL VALVE, 3 WAY 2 POSITION

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 3 way 2 position, manual rotary spool valve.

OPERATION
The DF-M3A when rotated fully to the clockwise position, the cartridge directs flow from (3) to (2) or (2) to (3) and
blocks flow at (1). When rotated fully to the counterclockwise position, the cartridge directs flow from (1) to (3) or
(3) to (1) and blocks flow at (2). All ports are closed in transition.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL May be used as metering product. Valve has

approximately 3.5 turns adjustment from extreme
clockwise fully to counterclockwise positions. See
chart for pressure drop in both positions.

Flow (LPM)
10 15 20 25 30 35 40 45
10
PERFORMANCE VALVE SPECIFICATIONS
Pressure Drop (bar)

Actual Test Data (Cartridge Only) Nominal Flow 12 GPM (45 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Flow (LPM) Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
5
0 5 10 15 20 25 30 35 40 45 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
150 10 Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

Weight .49 lbs (.22 kg)

100
0 Operating Fluid Media General Purpose Hydraulic Fluid
2 4 6 8 10 12 5 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Flow (GPM) Cavity DELTA 3W
50
Port 1 to 3 Port 2 to 3 Cavity Form Tool (Finishing) 40500001
Seal Kit 21191210
0 0
0 2 4 6 8 10 12
Flow (GPM)

Port 1 to 3 Port 2 to 3

without independent study, evaluation, and testing for suitability.

Page MD106
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .60 lbs (.27 kg)

ORDERING INFORMATION

DF-M3A – –

OPTIONS BODIES
Buna, Standard 00 Blank Without Body
Viton, Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

without independent study, evaluation, and testing for suitability.

Page MD107
MECHANICAL DIRECTIONAL CONTROLS

DG-M4A MANUAL SPOOL ROTARY VALVE, 4 WAY 2 POSITION, CRISS CROSS

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, manual rotary spool valve, 4 way 2 position, criss cross.

OPERATION
The DG-M4A, when rotated fully to clockwise position, the cartridge directs flow between (2) to (3) and (1) to (4).
When rotated fully to counterclockwise position, the cartridge directs flow between (3) to (4) and (1) to (2). All
ports are closed in transition.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

May be used as metering product. Valve has

approximately 3.5 turns adjustment from extreme
clockwise fully to counterclockwise positions. See
chart for pressure drop in both positions.

PERFORMANCE HYDRAULIC SYMBOL

Actual Test Data (Cartridge Only)

Flow (LPM)
0 10 20 30 40
200
Pressure Drop (PSI)

Pressure Drop (bar)

150 10
Flow (LPM)
1000 10 20 30 40
5
VALVE SPECIFICATIONS
200
50
Nominal Flow 10 GPM (38 LPM)
Pressure Drop (PSI)

Pressure Drop (bar)

150 10
0 0 8 GPM (30 LPM) from (2) to (3)
0 2 4 6 8 10 12 Rated Operating Pressure 3000 PSI (207 bar)
100 Flow (GPM)
Port 3 to 4 Port 2 to 1
Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min) per path
5
50 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Flow (LPM)
Filtration ISO 18/16/13
0 0 10 20 30 40 0 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
0
200 2 4 6 8 10 12
Flow (GPM)
Weight .32 lbs (.15 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Pressure Drop (PSI)

Pressure Drop (bar)

150 Port 3 to 4 Port 2 to 1 10

Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
100 Cavity DELTA 4W
Flow (LPM) 5
500 10 20 30 40 Cavity Form Tool (Finishing) 40500002
200 Seal Kit 21191214
0 0
Pressure Drop (PSI)

Pressure Drop (bar)

150 0 2 4 6 8 10 12
Flow (GPM) 10
Port 2 to 3 Port 1 to 4
100
5
50
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 7 / 2017

without independent study, evaluation, and testing for suitability.

0 0
0 2 4 6 8 10 12
Flow (GPM)
Port 2 to 3 Port 1 to 4
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.delta-power.com mail: [email protected] • www.tecnord.com

Page MD108
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

.75
1.50 [19.0]
[38.1]

1.25
[31.7]
2.50
3/8-24 UNF
[63.4]
2A THREAD
.61
[15.5]
1.21

.63
[15.9] 1.38
2.00 [34.9]
[50.8]
3.25
[82.6]
#6 SAE PORTS
4X

.12 .28 [7.1] DIA.

[3.2] MTG. HOLES
2.25 2X
[57.1]
BODY WEIGHT: .99 lbs. [.45
Body Weight: kg.](.45 kg)
.99 lbs

ORDERING INFORMATION

DG-M4A – –

OPTIONS BODIES
Buna, Standard 00 Blank Without Body
Viton, Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

without independent study, evaluation, and testing for suitability.

Page MD109
MECHANICAL DIRECTIONAL CONTROLS

DG-M4B MANUAL ROTARY SPOOL VALVE, 4 WAY 2 POSITION, CLOSED CENTER

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 4 way 2 position, manual rotary spool valve, closed center.

OPERATION
The DG-M4B when rotated fully to clockwise position, this valve blocks flow at all ports. When rotated fully to
counterclockwise position, the cartridge directs flow between (2) and (1), as well as (3) and (4).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL May be used as metering product. Valve has

approximately 3.5 turns adjustment from extreme
clockwise fully to counterclockwise positions. See
chart for pressure drop.

Flow (LPM)
PERFORMANCE
0 5 10 15 20 25 30 35 40 45 50 55 60 65 VALVE SPECIFICATIONS
150 10
Actual Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (LPM) Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min) per path
100
0 5 10 15 20 25 30 35 40 45 50 55 60 65 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
150 10 Filtration ISO 18/16/13
5
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
50
Pressure Drop (PSI)

Weight .33 lbs (.15 kg)

Pressure Drop (bar)

100
Operating Fluid Media General Purpose Hydraulic Fluid
5 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
0 0
Cavity DELTA 4W
50 0 5 10 15
Cavity Form Tool (Finishing) 40500002
Flow (GPM)
Seal Kit 21191214
Port 2 to 1 Port 3 to 4
0 0
0 5 10 15
Flow (GPM)

Port 2 to 1 Port 3 to 4

without independent study, evaluation, and testing for suitability.

Page MD110
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-M4B – –

OPTIONS BODIES
Buna, Standard 00 Blank Without Body
Viton, Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

without independent study, evaluation, and testing for suitability.

Page MD111
MECHANICAL DIRECTIONAL CONTROLS

DG-M4C MANUAL ROTARY SPOOL VALVE, 4 WAY 2 POSITION, TANDEM CENTER

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 4 way 2 position, manual rotary spool valve tandem center.

OPERATION
The DG-M4C when rotated fully to clockwise position, the cartridge allows flow from (2) to (4) and blocks flow at
(1) and (3). When rotated fully total counterclockwise position, the cartridge allows flow between (2) and (3) and
between (1) and (4). All ports are closed in transition.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

May be used as metering product. Valve has

HYDRAULIC SYMBOL approximately 3.5 turns adjustment from extreme
clockwise fully to counterclockwise positions. See
chart for fully open and fully closed pressure drop.

Flow (LPM)
0 5 10
PERFORMANCE 15 20 25 30 35 40 45 50 55 60 VALVE SPECIFICATIONS
200
Actual Test Data (Cartridge Only) Nominal Flow 12 GPM (45 LPM)
8 GPM (30 LPM) from (2) to (3)
Pressure Drop (PSI)

150
Pressure Drop (bar)

10
Flow (LPM) Rated Operating Pressure 3000 PSI (207 bar)
0 5 10 15 20 25 30 35 40 45 50 55 60 Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min) per path
100
200 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
5
Filtration ISO 18/16/13
50
Pressure Drop (PSI)

150 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

Pressure Drop (bar)

10
Weight .52 lbs (.23 kg)
0 0 Operating Fluid Media General Purpose Hydraulic Fluid
100
0 2 4 6 8 10 12 14 16
5
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Flow (GPM)
50 Cavity DELTA 4W
Port 1 to 4 Port 2 to 3 Port 2 to 4 Cavity Form Tool (Finishing) 40500002
Seal Kit 21191214
0 0
0 2 4 6 8 10 12 14 16
Flow (GPM)

Port 1 to 4 Port 2 to 3 Port 2 to 4

without independent study, evaluation, and testing for suitability.

Page MD112
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-M4C – –

OPTIONS BODIES
Buna, Standard 00 Blank Without Body
Viton, Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

without independent study, evaluation, and testing for suitability.

Page MD113
MECHANICAL DIRECTIONAL CONTROLS

QS-MRS ROTARY SELECTOR VALVE

DESCRIPTION
6 port rotary selector valve.

OPERATION
The QS-MRS when rotated counter-clockwise allows flow from (A) to (B) & (D) to (E) and
blocks (C) & (F). When rotated clockwise, the valve directs flow from (C) to (B) & (F) to (E)
and block flow at (A) & (D).

B D F

HYDRAULIC SYMBOL May be used as metering product. All ports closed

in transition. See chart for fully open and fully
closed pressure drop.
B D F (B)(D)(F)
A C E

(A)(C)(E)

A C E
PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 25 GPM (95 LTR/M)
Rated Operating Pressure 3000 PSI (207 bar)
Typical Internal Leakage
(150 SSU) 1 cu in/min (16 ml/min)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight 3.42 lbs (1.55 kg)
Operating Fluid Media General Purpose Hydraulic Fluid

without independent study, evaluation, and testing for suitability.

Page MD114
MECHANICAL DIRECTIONAL CONTROLS

DIMENSIONS

ORDERING INFORMATION

QS-MRS – –

OPTIONS BODIES
Buna Standard 00 N 1/2” NPT Ports
Viton Standard V0 S #8 SAE Ports

without independent study, evaluation, and testing for suitability.

Page MD115
MECHANICAL DIRECTIONAL CONTROLS

without independent study, evaluation, and testing for suitability.

Page MD116
MECHANICAL FLOW CONTROLS

MECHANICAL FLOW CONTROLS

FLOW RESTRICTORS, ADJUSTABLE (NEEDLE VALVES) .................................................................................................... MF3

PRESSURE COMPENSATED FLOW REGULATOR VALVES ................................................................................................ MF21

PRIORITY FLOW REGULATOR VALVES ...................................................................................................................................... MF47

VELOCITY FUSES ................................................................................................................................................................................... MF71

FLOW DIVIDER/COMBINER VALVES ............................................................................................................................................. MF77

LOGIC ELEMENTS .................................................................................................................................................................................. MF89

HAND PUMPS ............................................................................................................................................................................................ MF97

without independent study, evaluation, and testing for suitability.

Page MF1
MECHANICAL FLOW CONTROLS

without independent study, evaluation, and testing for suitability.

Page MF2
MECHANICAL FLOW CONTROLS

NEEDLE VALVES – FLOW RESTRICTORS

GPM PSI LPM BAR CAVITY MODEL PAGE

12 3500 45 241 7/8-14 DE-FCH MF4

6 3500 23 241 5/8-18 MA-NVA MF6

6 3500 23 241 3/4-16 PB-NVA MF8

10 3500 38 241 7/8-14 DE-NVA MF10

35 5000 132 345 1 1/16-12 HT-NVA MF12

40 3500 151 241 1 5/16-12 SJ-NVA MF14

3 3500 11 241 3/4-16 PB-NVB MF16

15 3500 57 241 7/8-14 DE-NVB MF18

TYPICAL SCHEMATIC

Typical application for an NVA/NVB is to meter flow to an actuator. In the example shown, the valve is used to allow a hydraulic motor to be
manually unloaded, so that the vehicle can be towed.

Typical application for the FCH is to meter flow in one direction while allowing free flow in the opposite direction.

(1)
FCH

NVA/
NVB
(2)
(2)

(1)

without independent study, evaluation, and testing for suitability.

Page MF3
MECHANICAL FLOW CONTROLS

DE-FCH ADJUSTABLE FLOW CONTROL VALVE, SPOOL TYPE, FREE REVERSE FLOW

DESCRIPTION
10 size, 7/8-14 thread, “Delta” adjustable needle flow control valve with free reverse flow.

OPERATION
The DE-FCH increases its orifice value from fully closed to fully open by turning screw counterclockwise. When
adjusted open the valves regulates flow (1) to (2). When fully closed the valve restricts flow from (1) to (2).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Flow ( LPM)
Nominal Flow 12 GPM (45 LPM)
0 5 10 15 20 25 30 35 40 45 50 55
Rated300
Operating Pressure 3500 PSI (241 bar)
20
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

15
200
Weight .32 lbs (.15 kg)
Flow ( LPM)
0 5 10 15 20 25 30 35 40 45 50 55 Operating Fluid Media General Purpose Hydraulic
10 Fluid
300 20 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
100
Cavity DELTA 2W 5
Pressure Drop (PSI)

Pressure Drop (bar)

15 Cavity Form Tool (Finishing) 40500000

200
PERFORMANCE Seal Kit 0 21191200 0
10 0 5 10 15
Actual Test Data (Cartridge Only) Flow (GPM)
100
5 Port 2 to 1 (valve open) Port 2 to 1 (valve closed)

0 Flow ( LPM) 0
Flow (LPM)
0 5 10 15
0 5 10 15 20 25 30 35 40 45 50 55 0 25 50 75
Flow (GPM)
300 20 500
Port 2 to 1 (valve open) Port 2 to 1 (valve closed)
30
400
Pressure Drop (PSI)

Pressure Drop (PSI)

Pressure Drop (bar)

15 25
200 Flow (LPM)
0 25 50 75 300 20
500 10
200 15
100 30
400 10
Pressure Drop (PSI)

Pressure Drop (bar)

255 100
5
300 20
0 0 0 0
2000 15
5 10 15 0 5 10 15 20
Flow (GPM) 10 Flow (GPM)
100
Port 2 to 1 (valve open) Port 2 to 1 (valve closed) 5 Port 1 to 2 (valve open FINE) Port 1 to 2 (valve open STANDARD)
0 0
0 5 Flow10
(LPM) 15 20
Flow (GPM)
0 25 50 75
500 Port 1 to 2 (valve open FINE) Port 1 to 2 (valve open STANDARD)
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 6 / 2020

without independent study, evaluation, and testing for suitability.

30
400
Pressure Drop (PSI)

Pressure Drop (bar)

25
300 20
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.delta-power.com 15 mail: [email protected] • www.tecnord.com
200
10
MF4
Page100
5

0 0
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-FCH – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPT Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK
Buna, Screen A0
Viton, Screen W0
Buna, Screen, Knob AK ADJUSTMENTS
Viton, Screen, Knob WK FINE Fine Adjustment
STRD Standard Adjustment
Note: use screen only if flow
direction is from (1) to (2).

without independent study, evaluation, and testing for suitability.

Page MF5
MECHANICAL FLOW CONTROLS

MA-NVA ADJUSTABLE FLOW CONTROL VALVE, NEEDLE TYPE

DESCRIPTION
7 size, 5/8-18 thread, “Mini” series, needle flow control valve.

OPERATION
The MA-NVA adjusts from fully open to fully closed by turning adjusting screw clockwise. When adjusted open
the valve allows flow (1) to (2) and (2) to (1). When fully closed the valve blocks flow from (1) to (2) and (2) to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 6 GPM (23 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 5 10 15 20 25 30 Filtration ISO 18/16/13
200 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .24 lbs (.11 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

150 10 Operating Fluid Media General Purpose Hydraulic Fluid

Cartridge Torque Requirements 15 ft-lbs (20.3 Nm)
100 Cavity MINI 2W
5 Cavity Form Tool (Finishing) 40500003
50 Seal Kit 21191202

0 0
0 2 4 6 8
Flow (GPM)

Port 1 to 2 (valve fully open)

without independent study, evaluation, and testing for suitability.

Page MF6
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .29 lbs (.13 kg)

ORDERING INFORMATION

MA-NVA – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

without independent study, evaluation, and testing for suitability.

Page MF7
MECHANICAL FLOW CONTROLS

PB-NVA ADJUSTABLE FLOW CONTROL VALVE, NEEDLE TYPE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, needle flow control.

OPERATION
The PB-NVA adjusts from fully open to fully closed by turning adjusting screw clockwise. When adjusted open the
valve allows flow from (1) to (2) and (2) to (1). When fully closed the valve blocks flow from (1) to (2) and (2) to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 5
PERFORMANCE 10 15 20 25 30 VALVE SPECIFICATIONS
300 20
Actual Test Data (Cartridge Only) Nominal Flow 6 GPM (23 LPM)
250
Rated Operating Pressure 3500 PSI (241 bar)
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (LPM) 15
200 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 5 10 15 20 25 30
Filtration ISO 18/16/13
300
150 10
20
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
250
100 Weight .22 lbs (.10 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

15
5
200 Operating Fluid Media General Purpose Hydraulic Fluid
50
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
150
0 10
0 Cavity POWER 2W
1000 2 4 6 8
Cavity Form Tool (Finishing) 40500005
Flow (GPM) 5
50 Seal Kit 21191102
Port 1 to 2 (valve fully open)
0 0
0 2 4 6 8
Flow (GPM)

Port 1 to 2 (valve fully open)

without independent study, evaluation, and testing for suitability.

Page MF8
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-NVA – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK
Buna, Screen A0
Viton, Screen W0
Buna, Screen, Knob AK
Viton, Screen, Knob WK

Note: use screen only if flow

direction is from (1) to (2).

without independent study, evaluation, and testing for suitability.

Page MF9
MECHANICAL FLOW CONTROLS

DE-NVA ADJUSTABLE FLOW CONTROL VALVE, NEEDLE TYPE, FINE ADJUST

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series fine adjust needle flow control valve.

OPERATION
The DE-NVA adjusts from fully open to fully closed by turning adjusting screw counterclockwise. When adjusted
open the valve allows flow (1) to (2) and (2) to (1). When fully closed the valve blocks flow from (1) to (2) and (2)
to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
PERFORMANCE
450 30
VALVE SPECIFICATIONS
400
Actual Test Data (Cartridge Only) 25 Nominal Flow 10 GPM (38 LPM)
Pressure Drop (PSI)

Pressure Drop (bar)

350
300 20
Rated Operating Pressure 3500 PSI (241 bar)
250 Flow (LPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
15
200 Filtration ISO 18/16/13
150 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
10 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
450
100 30
400
5 Weight .19 lbs (.09 kg)
50
25 Operating Fluid Media General Purpose Hydraulic Fluid
Pressure Drop (PSI)

Pressure Drop (bar)

350
0 0
3000 5 10 15 20 20 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
250 Flow (GPM) Cavity DELTA 2W
15
200
Port 1 to 2 (valve fully open) Cavity Form Tool (Finishing) 40500000
150 10
100
Seal Kit 21191202
5
50
0 0
0 5 10 15 20
Flow (GPM)

Port 1 to 2 (valve fully open)

without independent study, evaluation, and testing for suitability.

Page MF10
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-NVA – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK
Buna, Screen A0
Viton, Screen W0
Buna, Screen, Knob AK
Viton, Screen, Knob WK

Note: use screen only if flow

direction is from (1) to (2).

without independent study, evaluation, and testing for suitability.

Page MF11
MECHANICAL FLOW CONTROLS

HT-NVA ADJUSTABLE FLOW CONTROL VALVE, NEEDLE TYPE

DESCRIPTION
“High Pressure” 12 size, 1 1/16-12 thread, “Tecnord” series, needle flow control valve.

OPERATION
The HT-NVA adjusts from fully open to fully closed by turning adjusting screw clockwise. When adjusted open
the valve allows flow (1) to (2) and (2) to (1). When fully closed the valve blocks flow from (1) to (2) and (2) to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Valves with the knob option are NOT to be

HYDRAULIC SYMBOL
adjusted under pressure.

PERFORMANCE Flow (LPM) VALVE SPECIFICATIONS

0 25 50 75 100 125 150
Actual Test Data (Cartridge Only) Nominal Flow 35 GPM (132 LPM)
200
Rated Operating Pressure 5000 PSI (345 bar)
Flow (LPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Pressure Drop (PSI)

Pressure Drop (bar)

0 15025 50 75 100 125 150 Filtration10

ISO 18/16/13
200 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
100 Weight .72 lbs (.32 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

150 10 Operating
5 Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 70 ft-lbs (95 Nm)
100
50
Cavity TECNORD 2W
5
Cavity Form Tool (Finishing) 40500032
50 0 0
Seal Kit 21191302
0 5 10 15 20 25 30 35 40
0 Flow (GPM) 0
0 5 10 15 20 25 30 35 40
FlowPort 1 to 2 (valve fully open)
(GPM)

Port 1 to 2 (valve fully open)

without independent study, evaluation, and testing for suitability.

Page MF12
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 3.71 lbs (1.68 kg)

ORDERING INFORMATION

HT-NVA – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports
Buna, Knob 0K
Viton, Knob VK
Buna, Screen A0
Viton, Screen W0
Buna, Screen, Knob AK
Viton, Screen, Knob WK

Note: use screen only if flow

direction is from (1) to (2).

without independent study, evaluation, and testing for suitability.

Page MF13
MECHANICAL FLOW CONTROLS

SJ-NVA ADJUSTABLE FLOW CONTROL VALVE, NEEDLE TYPE

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, needle flow control valve.

OPERATION
The SJ-NVA adjusts from fully open to fully closed by turning the adjustment screw clockwise. When adjusted
open the valves regulates flow (1) to (2) or (2) to (1). When fully closed the valve blocks flow from (1) to (2) or
(2) to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
PERFORMANCE VALVE SPECIFICATIONS
0 25 50 75 100 125 150
100 Test Data (Cartridge Only)
Actual Nominal Flow 40 GPM (151 LPM)
6
Rated Operating Pressure 3500 PSI (241 bar)
Pressure Drop (PSI)

Pressure Drop (bar)

75 5
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Flow (LPM) 4
50 Filtration ISO 18/16/13
0 25 50 75 100 125 150
3
100 Media Operating Temp. Range -35° to 200°F (-37.2° to 93.3°C)
2
25 6 Weight .83 lbs (.37 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

1
75 5 Operating Fluid Media General Purpose Hydraulic Fluid
0 0
4 Cartridge Torque Requirements 90 ft-lbs (122 Nm)
500 5 10 15 20 25 30 35 40
3 Cavity SUPER 2W
Flow (GPM)
Port 1 to 2 (valve fully open) 2 Cavity Form Tool (Finishing) 40500017
25
1 Seal Kit 21191402
0 0
0 5 10 15 20 25 30 35 40
Flow (GPM)
Port 1 to 2 (valve fully open)

without independent study, evaluation, and testing for suitability.

Page MF14
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 1.29 lbs (.58 kg)

ORDERING INFORMATION

SJ-NVA – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4” NPT Ports
Buna, Knob 0K S #12 SAE Ports
Viton, Knob VK
Buna, Internally Adj. 0I
Viton, Internally Adj. VI
Buna, Tamper Proof 0T
Viton, Tamper Proof VT

without independent study, evaluation, and testing for suitability.

Page MF15
MECHANICAL FLOW CONTROLS

PB-NVB ADJUSTABLE FLOW CONTROL VALVE, NEEDLE TYPE, FINE ADJUST

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, fine adjust needle flow control.

OPERATION
The PB-NVB adjusts from fully open to fully closed by turning adjusting screw clockwise. When adjusted open
the valve allows flow (1) to (2) and (2) to (1). When fully closed the valve blocks flow from (1) to (2) and (2) to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 5 10 15
PERFORMANCE
300
20
VALVE SPECIFICATIONS

Actual
250 Test Data (Cartridge Only) Nominal Flow 3 GPM (11 LPM)
Pressure Drop (PSI)

Rated Operating Pressure 3500 PSI (241 bar)

Pressure Drop (bar)

Flow (LPM) 15
200
0 5 10 15 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
150
300
2010 Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
250
100 Weight .13 lbs (.06 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

15
200 5
50 Operating Fluid Media General Purpose Hydraulic Fluid
150 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
10
0 0 Cavity POWER 2W
1000 1 2 3 4 5
Cavity Form Tool (Finishing) 40500005
Flow (GPM) 5
50 Seal Kit 21191102
Port 1 to 2 (valve fully open)
0 0
0 1 2 3 4 5
Flow (GPM)

Port 1 to 2 (valve fully open)

without independent study, evaluation, and testing for suitability.

Page MF16
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-NVB – –

Note: use screen only if flow

direction is from (1) to (2).

without independent study, evaluation, and testing for suitability.

Page MF17
MECHANICAL FLOW CONTROLS

DE-NVB ADJUSTABLE FLOW CONTROL VALVE, COARSE ADJUST

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, course adjust needle flow control valve.

OPERATION
The DE-NVB adjusts from fully open to fully closed by turning adjusting screw clockwise. When adjusted open
the valve allows flow (1) to (2) and (2) to (1). When fully closed the valve blocks flow from (1) to (2) and (2) to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0
PERFORMANCE 25 50 75 VALVE SPECIFICATIONS
300 20
Actual Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
250
Rated Operating Pressure 3500 PSI (241 bar)
Pressure Drop (PSI)

Pressure Drop (bar)

15
200 Flow (LPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 25 50 75 Filtration ISO 18/16/13
150
300 2010 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
100
250 Weight .47 lbs (.21 kg)
Pressure Drop (PSI)

155
Pressure Drop (bar)

200
50
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
150
0 100 Cavity DELTA 2W
0 5 10 15 20
100 Cavity Form Tool (Finishing) 40500000
Flow (GPM) 5
50
Seal Kit 21191202
Port 1 to 2 (valve fully open)
0 0
0 5 10 15 20
Flow (GPM)
Port 1 to 2 (valve fully open)

without independent study, evaluation, and testing for suitability.

Page MF18
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-NVB – –

Note: use screen only if flow

direction is from (1) to (2).

without independent study, evaluation, and testing for suitability.

Page MF19
MECHANICAL FLOW CONTROLS

without independent study, evaluation, and testing for suitability.

Page MF20
MECHANICAL FLOW CONTROLS

PRESSURE COMPENSATED FLOW REGULATOR VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

3 3000 11 207 5/8-18 MA-FCA MF22

4 3500 15 241 3/4-16 PB-FCA MF24

8 3500 30 241 7/8-14 DE-FCA MF26

8 3500 22 241 3/4-16 PB-FCC MF28

8 3500 30 241 7/8-14 DE-FCC MF30

12 3500 45 241 7/8-14 DE-FAR MF32

18 5000 68 345 1 1/16 -12 HT-FCA MF34

25 3500 95 241 1 5/16 -12 SJ-FCA MF36

8 3500 30 241 7/8-14 DE-FCB MF38

6 3500 23 241 3/4-16 PB-FCF MF40

8 3500 30 241 7/8-14 DE-FCF MF42

25 3500 95 241 1 5/16 -12 SJ-FCF MF44

TYPICAL SCHEMATIC

Typical application for the FCA, FCB, FCC and FCF is for actuator speed control. The FCB and FCF valves have fixed, non-adjustable settings.
The FCA and FCC versions are adjustable.

(1) FCB (1)

FCA
FCF
FCC
(2) (2)

without independent study, evaluation, and testing for suitability.

Page MF21
MECHANICAL FLOW CONTROLS

MA-FCA ADJUSTABLE FLOW CONTROL VALVE, PRESSURE COMPENSATED

DESCRIPTION
7 size, 5/8-18 thread, “Mini” series, pressure compensated, flow control valve.

OPERATION
The cartridge maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit
downstream of (1). The adjustable control differential spring load can be set to customer flow specification (see
options for ranges). The valve begins to respond to load changes when the flow through the valve creates a
pressure differential from (2) to (1) greater than 200 PSI with accurate flow maintenance from 200 to 3000 PSI
(14 to 207 bar). Reverse flow (1) to (2) returns through the control orifice and is non-compensated. The regulated
flow increases from low to high with clockwise rotation of the knob.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
1 • Fine low-torque adjustment.
Best stability is obtained with adjustment at
highest flow.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 3 GPM (11 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .29 lbs (.13 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 15 ft-lbs (20.3 Nm)
Cavity MINI 2W
PERFORMANCE Cavity Form Tool (Finishing) 40500003
Actual Test Data (Cartridge Only) Seal Kit 21191000

Pressure Drop (bar) Pressure Drop (bar)

0 50 100 150 200 0 50 100 150 200
2 4 15

3
5 10
Flow (GPM)
Flow (GPM)

Flow (LPM)
Flow (LPM)

1 2

5
1

0 0 0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI) Pressure Drop (PSI)
Port 2 to 1 Port 2 to 1 Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MF22
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .29 lbs (.13 kg)

ORDERING INFORMATION

MA-FCA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

FLOW
0.17 .08 - .17 GPM
00.5 .25 - .5 GPM
00.9 .5 - .9 GPM

without independent study, evaluation, and testing for suitability.

Page MF23
MECHANICAL FLOW CONTROLS

PB-FCA ADJUSTABLE FLOW CONTROL VALVE, PRESSURE COMPENSATED

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, pressure compensated, flow control valve.

OPERATION
The cartridge maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit
downstream of (1). The adjustable control differential spring load can be set to customer flow specification (see
options for ranges). The valve begins to respond to load changes when the flow through the valve creates a
pressure differential from (2) to (1), greater than 200 PSI (14 bar), with accurate flow maintenance from 200 to
3500 PSI (14 to 241 bar). Reverse flow (1) to (2) returns through the control orifice and is non-compensated. The
regulated flow increases from low to high with clockwise rotation of the knob.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
• Fine low-torque adjustment.

HYDRAULIC SYMBOL

Best stability is obtained with adjustment at

highest flow.

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 4 GPM (15 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Pressure Drop (bar)
Pressure Drop (bar) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 50 100 150 200
0 5 50 100 150 200 Filtration ISO 18/16/13
5 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
4 15
Weight .26 lbs (.12 kg)
4 15 Operating Fluid Media General Purpose Hydraulic Fluid
Flow (GPM)

Flow (LPM)

3
10 Cartridge Torque Requirements 25 ft-lbs (34 Nm)
Flow (GPM)

Flow (LPM)

3 2
10
Cavity POWER 2W
5 Cavity Form Tool (Finishing) 40500005
2 1
Seal Kit 21191100
0 0 5
1 0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI)
0 Port 2 to 1 Port 2 to 1 0
0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MF24
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-FCA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Tamper Proof 0T S #6 SAE Ports
Viton, Tamper Proof VT

FLOW
0.45 .25 - .45 GPM
0.75 .45 - .75 GPM
1.35 .75 - 1.35 GPM
2.65 1.35 - 2.65 GPM
4.00 2.65 - 4.00 GPM

Tamper Proof
Fill in Digit Pressure Setting
Example: 02.0 - 2 GPM

without independent study, evaluation, and testing for suitability.

Page MF25
MECHANICAL FLOW CONTROLS

DE-FCA ADJUSTABLE FLOW CONTROL VALVE, PRESSURE COMPENSATED

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pressure compensated, flow control valve.

OPERATION
The DE-FCA maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit
downstream of (1). The adjustable control (see options for ranges) differential spring load can be set to customer
flow specification. The valve begins to respond to load changes when the flow through the valve creates a
pressure differential across the control orifice greater than 100 PSI (6.9 bar), with accurate flow maintenance
from 100 to 3500 PSI (6.9 to 241 bar). Reverse flow (1) to (2) returns through the control orifice and is non-
compensated. The regulated flow increases from low to high with clockwise rotation of the knob.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
• Fine low-torque adjustment.
Best stability is obtained with adjustment at
highest flow.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Maximum Flow 8 GPM (30 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .49 lbs (.22 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Cavity DELTA 2W
PERFORMANCE Cavity Form Tool (Finishing) 40500000
Actual Test Data (CartridgePressure
Only)Drop (bar) Seal Kit Pressure Drop (bar)
21191200
0 50 100 150 200 0 50 100 150 200
3 10
35
10
8 30
Pressure Drop (bar) Pressure Drop (bar)
2 25
Flow (GPM)
Flow (GPM)

Flow (LPM)
Flow (LPM)

0 50 100 150 200 6 0 50 100 150 200

20
3 5
10
4 15 35
1 10
10
2 8 30
5
2 25
Flow (GPM)
Flow (GPM)

Flow (LPM)
Flow (LPM)

0 0 0 6 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000 20
Pressure Drop (PSI) 5 Pressure Drop (PSI)
4 15
1 Port 2 to 1 Port 2 to 1 Port 2 to 1 Port 2 to 1
10
2
5
0 0 0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI) Pressure Drop (PSI)

Port 2 to 1 Port 2 to 1 Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MF26
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-FCA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK

FLOW
01.0 .5-1 GPM
02.0 1-2 GPM
04.0 2-4 GPM
08.0 4-8 GPM

without independent study, evaluation, and testing for suitability.

Page MF27
PB-FCC Adjustable Flow Control Valve, Pressure Compensated
DESCRIPTION
FLOW CONTROLS Delta Power
8 size, 3/4-16 thread, “Power” series, pressure compensated
Company
MECHANICAL
flow control valve.
FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109

PB-FCC ADJUSTABLEOPERATION
FLOW CONTROL VALVE, PRESSURE COMPENSATED
PB-FCC Adjustable Flow
TheControl
PB-FCC Valve, Pressure
maintains Compensated
a constant flow rate out of (1) regardless of load pressure changes in the circuit
downstream of (1).
DESCRIPTION DESCRIPTION
8 size, 3/4-16 thread, “Power” series, pressure compensated flow control valve.
8 size, 3/4-16 thread, “Power” series, pressure compensated flow control valve.
The adjustable control differential spring load can be set to customer flow specification (see options for
OPERATION
ranges).
TheOPERATION
PB-FCC maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit
downstream of (1).
Thevalve
The PB-FCC maintains
begins to responda constant
to load flow rate outwhen
changes of (1)the
regardless
flow throughof load
thepressure changes
valve creates in the circuit
a pressure differential
Thefrom (2) tocontrol
downstream
adjustable (1) across the
of (1).
differential control
spring load canorifice.
be set toConsult
customer graph to see (see
flow specification regulation at high and low adjustment
options for
ranges).
settings.
The adjustable control differential spring load can be set to customer flow specification (see options for ranges).
TheThevalvevalve
beginsbegins to respond
to respond to loadto load changes
changes when thewhen the flowthe
flow through through the valve
valve creates createsdifferential
a pressure a pressure differential from
Reverse
from flow
(2)(2)toto(1)(1) (1)the
across
across to (2) returns
thecontrol
control through
orifice.
orifice. Consultthe
Consult control
graph
graph totosee
seeorifice and at
regulation
regulation is non-compensated.
at high
high and
and low
low adjustment
adjustment settings.
settings.
Reverse flow (1) to (2) returns through the control orifice and is non-compensated. The regulated flow increases
The regulated
from flow
low (1)
to high
flow increases from low to high with clockwise rotation of the knob.
Reverse to (2)with clockwise
returns through rotation
the controlof orifice
the knob.
and is non-compensated.

FEATURES
The regulated flow increases from low to high with clockwise rotation of the knob.
FEATURES
1 
FEATURES
Hardened parts for long life.
• Hardened parts for long life.
 Industry common cavity.
1 Hardenedcommon
• Industry parts for cavity.
long life.
 Industry common cavity.

2
2

HYDRAULIC SYMBOL
VALVE SPECIFICATIONS
VALVE SPECIFICATIONS
Best
Beststability
stability isisobtained
obtainedwithwith adjustment
adjustment at at Nominal FlowNominal Flow 5 GPM (19 LPM) 5 GPM (19 LPM)
highest flow. Rated Operating Pressure 3500 PSI (241 bar) is obtained with adjustment at
highest flow. Rated Operating Pressure
Best stability3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Viscosity Range highest flow.36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Filtration
Media Operating ISO 18/16/13
HYDRAULIC SYMBOL -40 to 250 F (-40 to 120 C)
TemperatureMedia
Range Operating
HYDRAULIC SYMBOL Weight .26 lbs. (.12 kg) -40 to 250 F (-40 to 120 C)
Temperature Range
Operating Fluid Media General Purpose Hydraulic Fluid
Weight
Cartridge Torque .26 lbs. (.12 kg)
2 1 Requirements
Cavity
Operating Fluid25 ft-lbs (34 Nm)
Media
POWER 2W
General Purpose Hydraulic Fluid
Cartridge Torque
PERFORMANCE
PERFORMANCE
2 1 Seal Kit
Tool (Finishing) 40500005
Cavity Form Requirements
VALVE 21191100
CavitySPECIFICATIONS
25 ft-lbs (34 Nm)
POWER 2W
Actual Test Data (Cartridge Only)
Actual Test Data (Cartridge Only)
Pressure Drop (BAR)
CavityFlow
Nominal Form
Tool (Finishing)
40500005
5 GPM (19 LPM)
PERFORMANCE0 50 100 150 200 Seal Kit
Rated Operating Pressure 21191100
3500 PSI (241 bar)
5
Actual Test Data (Cartridge Only) 18
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Regulated Flow (LPM)
Regulated Flow (GPM)

4 15
Pressure Drop (BAR) Filtration ISO 18/16/13
03 50 100 150 12 200 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
5 9
2
18 Weight .26 lbs (.12 kg)
Regulated Flow (LPM)

6 Operating Fluid Media General Purpose Hydraulic Fluid

Regulated Flow (GPM)

4 15
1
3 Cartridge Torque Requirements 25 ft-lbs (34 Nm)
3 0 12
0 Cavity POWER 2W
0 500 1000 1500 2000 2500 3000
9 Cavity Form Tool (Finishing) 40500005
Pressure Drop (PSI)
2
Port 2 to 1 Port 2 to 1 6 Seal Kit 21191100
1
WARNING: The specifications/application data shown in our catalogs 3and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
0 Phone: (815) 397-6628 0
Fax: (815) 397-2526 E-mail: [email protected]
0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI)
Port 2 to 1 Port 2 to 1

WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 6 / 2020

without independent study, evaluation, and testing for suitability.

Page MF28
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109

DIMENSIONS

DIMENSIONS
2.00 [50.8]
1.12 [28.6]

1.50
.87 [22.2] 1.25
[38.1]
HEX. [31.7]
KNOB .62
[15.9]

3
16" SOCKET HEX

EXTERNAL ADJ.

2.30
INTERNAL ADJ.
[58.5]
TAMPER PROOF 3/8-24 UNF-2A
THREAD .281 [7.1] MTG. HOLE
(2X)

.50 .25 [6.3]

3.44 [12.7]
[87.4]
2.70 1.51
[68.6] .22 [5.5] 2.00 [38.5] 1.50
[50.7] [38.1]

1.11 3/4-16 UNF-2A

[28.1] THREAD
#6 SAE PORT
.25
1.50 [38.1] (2X)
[6.3]

Body Weight: .39 lbs (.18 kg)

BODY WEIGHT: .39 Lb. [.18 Kg.]
ORDERING INFORMATION
PB-FCC
ORDERING INFORMATION - - -
PB-FCC –
OPTIONS – –
BODIES
External Adjust w/Locknut, Buna 00 Blank Without Body
External Adjust w/Locknut, Viton V0 N 1/4 NPTF Ports
0K
Knob, Buna OPTIONS S #6 SAE Ports BODIES
Knob,
External Viton
Adjust VK Buna
w/Locknut, 00 Blank Without Body
Internal Adjust,
External Buna
Adjust 0I Viton
w/Locknut, V0 FLOW RANGE N 1/4” NPTF Ports
VI Buna
Internal Adjust, Viton Knob, 0K 0.45 0.25 - 0.45 GPM S #6 SAE Ports
Tamper Proof, Buna Knob, 0T Viton VK 0.75 0.45 - 0.75 GPM
Tamper Proof,Internal VT Buna
Viton Adjust, 0I 1. 25 0.75 – 1.25 GPM
Internal Adjust, Viton VI 2.00 1.25 – 2.00 GPM
FLOW
Tamper Proof, Buna 0T 5.00 2.00 –0.45
5.00 GPM
.25 - .45 GPM
Tamper Proof, Viton VT 0.75 .45 - .75 GPM
Preset & Tamper
1.25 .75 - 1.25Proof
GPM
Fill in2.00 1.25
4 Digit - 2.00
Flow GPM
Setting
5.00 2.00 -
Example: 02.0 – 2 GPM5.00 GPM

Tamper Proof
Fill in 4 Digit Flow Setting
Example: 02.0 - 2 GPM

without independent study, evaluation, and testing for suitability.

4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
WARNING: The specifications/application
mail: [email protected] data shown in our catalogs and data
• www.delta-power.com sheets
mail: are intended
[email protected] only as a general guide for the product described
• www.tecnord.com
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Page MF29
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
MECHANICAL FLOW CONTROLS

DE-FCC ADJUSTABLE FLOW CONTROL VALVE, PRESSURE COMPENSATED

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pressure compensated, flow control valve.

OPERATION
The DE-FCC maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit
downstream of (1). The adjustable control orifice can be set to customer flow specification (see options for
ranges). The valve begins to respond to load changes when the flow through the valve creates a pressure
differential across the control orifice. Consult chart to see regulation at high and low adjustment settings. Reverse
flow (1) to (2) returns through the control orifice and is non-compensated. The regulated flow increases from low
to high with clockwise rotation of the knob.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
• Fine low-torque adjustment.
Lowest pressure drop is obtained with
adjustment at lowest setting.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Max Regulated Flow 8 GPM (30 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .51 lbs (.23 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Cavity DELTA 2W
PERFORMANCE Cavity Form Tool (Finishing) 40500000
Actual Test Data (Cartridge Only) Seal Kit 21191200

Pressure Drop (bar) Pressure Drop (bar)

0 50 100 150 200 0 50 100 150 200
10 4 15
Pressure Drop (bar) 35
Pressure Drop (bar)
0 50 100 150 200 0 50 100 150 200
8 30
10 3 4 15
25 35 10
Flow (GPM)
Flow (GPM)

Flow (LPM)

6
8 20 30 2
3
4 15 10
25
Flow (GPM)
Flow (GPM)

5
Flow (LPM)

Flow (LPM)
6 10 1
2 20 2
5
4 15
0 0 0 0 5
0 500 1000 1500 2000 2500 3000 10 0 1 500 1000 1500 2000 2500 3000
2
Pressure Drop (PSI) 5 Pressure Drop (PSI)
Port 2 to 1 Port 2 to 1 Port 2 to 1 Port 2 to 1
0 0 0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI) Pressure Drop (PSI)
Port 2 to 1 Port 2 to 1 Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MF30
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-FCC – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK

FLOW
1.16 .80-1.16 GPM
1.62 1.16-1.62 GPM
2.09 1.62-2.09 GPM
2.90 2.09-2.90 GPM
3.82 2.90-3.82 GPM
5.00 3.82-5.00 GPM
8.00 5.00-8.00 GPM

without independent study, evaluation, and testing for suitability.

Page MF31
FLOW CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
DE-FAR Fully Adjustable Flow Control Valve, Pressure Compensated
DE-FAR Fully
DE-FAR FULLY ADJUSTABLEFlowFLOW
DESCRIPTION
Adjustable CONTROL
Control VALVE, PRESSURE
Valve, Pressure COMPENSATED
Compensated
10 size, 7/8-14 thread, “Delta” series, pressure compensated, fully adjustable flow control valve.
DESCRIPTION
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pressure compensated, fully adjustable flow control valve.
OPERATION
10 size, 7/8-14 thread, “Delta” series, pressure compensated, fully adjustable flow control valve.
The DE-FAR maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit
OPERATION
downstream
The of (1). a constant flow rate out of (1) regardless of load pressure changes in the circuit
DE-FAR maintains
OPERATION
downstream
The adjustable
DE-FAR of (1).
maintains a constant
The control orifice can beflow
set rate out of (1)
to customer regardless
flow of load pressure changes in the circuit
specification.
downstream of (1). The adjustable control orifice can be
The adjustable control orifice can be set to customer flow specification.set to customer flow specification. The valve begins to
respond
The valveto begins
load changes when to
to respond theload
flow changes
through the valve
when thecreates a pressure
flow through thedifferential across
valve creates a the controldifferential
pressure orifice.
across
The valvethe
Consult chartcontrol
begins totoseeorifice.
respond toConsult
load
regulation chart
andto
at changes
high see
when
low regulation
the flow through
adjustment at high and
valvelow
the Reverse
settings. adjustment
creates
flow to (2)settings.
a pressure
(1) differential
returns through the
across theorifice
control control orifice.
and Consult chart to see
is non-compensated. Theregulation
regulatedatflowhighincreases
and low adjustment
from low to settings.
high with counterclockwise
Reverse
rotation offlow
the (1) to (2)
adjustment returns
knob. through the control orifice and is non-compensated.
Reverse flow (1) to (2) returns through the control orifice and is non-compensated.
The regulated flow increases from low to high with counterclockwise rotation of the adjustment knob.
The regulated flow increases from low to high with counterclockwise rotation of the adjustment knob.
FEATURES
FEATURES
• Hardened parts for long life.
FEATURES
• Industry commonparts
Hardened cavity.
for long
  Hardened parts for long life. life.
•  Fine low-torque
Industry
 Industry adjustment.
common cavity.
11 Fine
  Fine
common cavity.
low-torque
low-torque adjustment.
adjustment.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

VALVE SPECIFICATIONS “Fully Adjustable,” Valve can be adjusted down to
Max Max
Regulated Flow Flow
Regulated 12 GPM (45 LPM)
“Fully Adjustable,” Valve can be adjusted down to leakage flow. 12 GPM (45 LPM)
“Fully Adjustable,” Valve can be adjusted down to Rated Operating Pressure 3500 PSI (241 bar)
leakage flow. Rated Operating Pressure 3500 PSI (241 bar)
leakage flow. Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Viscosity
Filtration
Range 36 to 3000 SSU (3 to 647 cSt)
ISO 18/16/13
Media Filtration
Operating Temperature ISO 18/16/13
Media Operating Temperature -40 to 250 F (-40 to 120 C)
HYDRAULIC SYMBOL Range -40 to 250 F (-40 to 120 C)
HYDRAULIC SYMBOL WeightRange .49 lbs. (.22 kg)
Weight
Operating Fluid Media General.49 lbs. (.22
Purpose kg) Fluid
Hydraulic
Operating
Cartridge TorqueFluid Media General Purpose Hydraulic Fluid
2 1 Requirements
Cartridge Torque
30 ft-lbs (40.6 Nm)

PERFORMANCE
PERFORMANCE
2 1 CavityRequirements DELTA 2W
KitVALVE SPECIFICATIONS21191200
Seal Cavity
30 ft-lbs (40.6 Nm)
DELTA 2W
Actual Test Data (Cartridge Only)
PERFORMANCE Seal
Actual Test Data (Cartridge Only) Max Kit
Regulated Flow 21191200
12 GPM (45 LPM)
Actual Test Data (Cartridge
PressureOnly)
Drop (BAR) Rated Operating Pressure 3500 PSI (241 bar)
0 50 100 Drop (BAR)
Pressure 150 200 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
14
0 50 100 150 50
200 Filtration ISO 18/16/13
12
Regulated Flow (LPM)
Regulated Flow (GPM)

14 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

40 50
10 Weight .49 lbs (.22 kg)
12
Regulated Flow (LPM)
Flow (GPM)

8 30 40 Operating Fluid Media General Purpose Hydraulic Fluid

10
6 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
8 20 30
Cavity DELTA 2W
4
6 10 Seal Kit 21191200
Regulated

2 20
40 0
10
2 0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI)
0 0
0 Port 2 to
500 1
1000 Port
1500 Port 22500
2 to 1 2000 to 1 3000
Pressure Drop (PSI)
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
Port 2 to 1 Port 2not
(herein). Any specific application should to be
1 undertaken
Port 2 towithout
1 independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 6 / 2020

Phone: (815) 397-6628

without independent study, evaluation, and testing for suitability. Fax: (815) 397-2526 E-mail: [email protected]

Page MF32
FLOW CONTROLS Delta Power Company
MECHANICAL
4484 Boeing FLOW
Drive - CONTROLS
Rockford, IL 61109

DIMENSIONS

.81
1.50 [20.6]
1.52 1.00 HEX [38.1]
[38.7] [25.4]

WITH KNOB 2.58

[65.5] 1.97
3/8-24 UNF-2A [50.0]
STANDARD

2.61 .63
[66.3] 2.00 [16.0]
[50.8] 1.63
2.13 [41.4]
[54.1] #8 SAE PORT (2X)

Ø.281 [7.1]
1.25 .75 [19.1] MTG HOLE (2X)
[31.8] 7/8-14 UNF-2A .13 [3.2] 1.75 [44.5]
2.00 [50.8]

Body Weight: 47 lbs (.21 kg)

ORDERING INFORMATION

ORDERING INFORMATIONDE-FAR – – –
DE-FAR - - -
OPTIONS OPTIONS BODIES BODIES
Buna, ExternalBuna,
Adj. w/locknut 00
External Adj. w/locknut 00 Blank Without Body Blank Without Body
Viton, ExternalViton,
Adj. w/locknut V0
External Adj. w/locknut V0 N 3/8 NPTF Ports N 3/8 NPTF Ports
Buna, Knob Buna, 0KKnob 0K S #8 SAE Ports S #8 SAE Ports
Viton, Knob Viton, VKKnob VK
FLOW SETTING
XXXX 1 – 12 GPM
FLOW SETTING
XXXX 0-12 GPM
Preset
Example: 0005
Preset= 5 GPM +/-10%
Example: 0005 = 5 GPM ±10%

without independent study, evaluation, and testing for suitability.

4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.delta-power.com mail: [email protected] • www.tecnord.com
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Page MF33
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
MECHANICAL FLOW CONTROLS

HT-FCA ADJUSTABLE FLOW CONTROL VALVE, PRESSURE COMPENSATED

DESCRIPTION
“High Pressure” 12 size, 1 1/16 -12 thread, “Tecnord” series, pressure compensated, flow control valve.

OPERATION
The HT-FCA maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit downstream
of (1). The adjustable control orifice can be set to customer flow specification (see options for ranges). The valve
begins to respond to load changes when the flow through the valve creates a pressure differential across the
control orifice. Consult chart to see regulation at high and low adjustment settings. Reverse flow (1) to (2) returns
through the control orifice and is non-compensated. The regulated flow increases from low to high with clockwise
rotation of the adjustment screw.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
1 • Fine low-torque adjustment.

Valve can adjust down to approximately 1 GPM.

HYDRAULIC SYMBOL Optimum flow regulation performance achieved
when pressure differential is between 500 & 2500
PSI from port (2) to (1).

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Max Regulated Flow 18 GPM (68 LPM)
Rated Operating Pressure 5000 PSI (345 bar)
Pressure Drop (bar) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 50 100 150 200 Filtration ISO 18/16/13
20 75
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .73 lbs (.33 kg)
15
50 Operating Fluid Media General Purpose Hydraulic Fluid
Flow (GPM)

Flow (LPM)

Cartridge Torque Requirements 70 ft-lbs (95 Nm)

10
Cavity TECNORD 2W
25 Cavity Form Tool (Finishing) 40500032
5
Seal Kit 21191300

0 0
0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MF34
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 3.7 lbs (1.7 kg)

ORDERING INFORMATION

HT-FCA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports
Buna, Knob 0K
Viton, Knob VK

FLOW
XXXX 0-18 GPM

Preset & Tamper Proof

Example: 0015 - 15 GPM ±10%

Note: aluminum NOT durability rated for

4000 PSI. Consult factory for options.
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W6 / 2020

without independent study, evaluation, and testing for suitability.

Page MF35
MECHANICAL FLOW CONTROLS

SJ-FCA ADJUSTABLE FLOW CONTROL VALVE, PRESSURE COMPENSATED

DESCRIPTION
16 size, 1 5/16 -12 thread, “Super” series, pressure compensated, flow control valve.

OPERATION
The SJ-FCA maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit downstream
of (1). The adjustable control orifice can be set to customer flow specification (see options for ranges). The valve
begins to respond to load changes when the flow through the valve creates a pressure differential across the
control orifice. Consult chart to see regulation at high and low adjustment settings. Reverse flow (1) to (2) returns
through the control orifice and is non-compensated. The regulated flow increases from low to high with clockwise
rotation of the adjustment knob.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
• Fine low-torque adjustment.

HYDRAULIC SYMBOL

“Fully Adjustable,” Valve can be adjusted down

to leakage flow.

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 25 GPM (95 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Pressure Drop (bar) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 50 100Drop (bar) 150
Pressure 200 Filtration ISO 18/16/13
20 75 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
0 50 100 150 200
20 75 Weight .89 lbs (.40 kg)
15 Operating Fluid Media General Purpose Hydraulic Fluid
50 Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Flow (GPM)

Flow (LPM)

15
10 50 Cavity SUPER 2W
Flow (GPM)

Flow (LPM)

Cavity Form Tool (Finishing) 40500017

10 25 Seal Kit 21191400
5
25
5
0 0
0 500 1000 1500 2000 2500 3000
0 Pressure Drop (PSI) 0
0 500 1000 1500 2000 2500 3000
Port 2 to 1 Port 2 to 1
Pressure Drop (PSI)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MF36
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 1.29 lbs (.59 kg)

ORDERING INFORMATION

SJ-FCA – – –

OPTIONS BODIES
Buna, External Adj. w/locknut 00 Blank Without Body
Viton, External Adj. w/locknut V0 N 3/4” NPT Ports
Buna, Knob 0K S #12 SAE Ports
Viton, Knob VK
Buna, Internally Adj. 0I
Viton, Internally Adj. VI FLOW SETTING
Buna, Tamper Proof 0T XXXX 0-25 GPM
Viton, Tamper Proof VT
Preset & Tamper Proof
Example: 0015 – 15 GPM ±10%

without independent study, evaluation, and testing for suitability.

Page MF37
MECHANICAL FLOW CONTROLS

DE-FCB FIXED FLOW CONTROL VALVE, PRESSURE COMPENSATED

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, fixed pressure compensated, flow control valve.

OPERATION
The DE-FCB maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit downstream
of (1). The valve begins to respond to load changes when the flow through the valve creates a pressure differential
across the control orifice, in excess of the spring load. Consult chart for regulation performance. Reverse flow (1)
to (2) returns through the control orifice and is non-compensated.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Low pressure drop version for low differential

circuits.

Pressure Drop (bar)

0 50 100 150 200
10
35
8 30
PERFORMANCE 25 VALVE SPECIFICATIONS
Flow (GPM)

Flow (LPM)

6
20
Actual Test Data (Cartridge Only) Max Regulated Flow 8 GPM (30 LPM)
4 15
Rated Operating Pressure 3500 PSI (241 bar)
Pressure Drop (bar)
10 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
2 0 50 100 150 200
5 Filtration ISO 18/16/13
10
0 0 35 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
80 500 1000 1500 2000 2500 3000
30 Weight .29 lbs (.13 kg)
Pressure Drop (PSI)
25 Operating Fluid Media General Purpose Hydraulic Fluid
Flow (GPM)

Flow (LPM)

6 Port 2 to 1 Port 2 to 1
20 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
4 15 Cavity DELTA 2W
Cavity Form Tool (Finishing) 40500000
10
2 Seal Kit 21191204
5
0 0
0 500 1000 1500 2000 2500 3000

Pressure Drop (PSI)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MF38
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-FCB – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPT Ports
S #8 SAE Ports

FLOW SETTING
01.0 1 GPM
02.0 2 GPM
03.0 3 GPM
04.0 4 GPM
05.0 5 GPM
06.0 6 GPM
07.0 7 GPM
08.0 8 GPM
± 15%

without independent study, evaluation, and testing for suitability.

Page MF39
MECHANICAL FLOW CONTROLS
FLOW CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
PB-FCF FIXED FLOW CONTROL VALVE, PRESSURE COMPENSATED
PB-FCF Fixed Flow Control Valve, Pressure Compensated
DESCRIPTION
DESCRIPTION
8 size, 3/4-16 thread, “Power” series, pressure compensated flow control valve.
8 size, 3/4-16 thread, “Power” series, pressure compensated flow control valve.
OPERATION
OPERATION
ThePB-FCF
The PB-FCFmaintains
maintains a constant
constantflow
flowrate outout
rate of (1) regardless
of (1) of load
regardless pressure
of load changes
pressure in the circuit
changes in the downstream
circuit
downstream of (1).begins to respond to load changes when the flow through the valve creates a pressure differential
of (1). The valve
across the control orifice, in excess of the spring load. Consult graph for regulation performance.
The valve begins to respond to load changes when the flow through the valve creates a pressure differential
Reverse
across the flow (1) orifice,
control to (2) returns through
in excess of thethe control
spring orifice
load. and is
Consult non-compensated.
graph for regulation performance.

Reverse flow (1) to (2) returns through the control orifice and is non-compensated.
FEATURES
• Hardened parts for long life.
• Industry common cavity.
FEATURES
1  Hardened parts for long life.
 Industry common cavity.

VALVE SPECIFICATIONS
Best stability version for high differential circuits. Nominal Flow 6 GPM (22 LPM)
HYDRAULIC SYMBOL
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to
Best 3000 SSU
stability (3 to for
version 647 high
cSt) differential
Filtration ISO 18/16/13
circuits.
Media Operating
HYDRAULIC SYMBOL -40 to 250 F (-40 to 120 C)
Temperature Range
Weight .26 lbs. (.12 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
2 1 Cartridge Torque
Requirements
25 ft-lbs (34 Nm)
Cavity POWER 2W
Cavity Form Tool (Finishing) 40500005
PERFORMANCE
PERFORMANCE SealVALVE
Kit SPECIFICATIONS 21191100
Actual Test Data (Cartridge Only)
Actual Test Data (Cartridge Only) Maximum Flow 6 GPM (23 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .26 lbs (.12 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
Cavity POWER 2W
Cavity Form Tool (Finishing) 40500005
Seal Kit 21191100

without independent study, evaluation, and testing for suitability.

Page MF40
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW
4484 Boeing Drive CONTROLS
- Rockford, IL 61109

DIMENSIONS

2.00 [50.8]
1.12 [28.6]

.87 [22.2] 1.25

HEX. [31.7]
.62
[15.9]

1.18 .281 [7.1] MTG. HOLE

[29.9] (2X)

2.32 .22 [5.5] .50 .25 [6.3]

[12.7]
[58.8]
1.51
2.00 [38.5] 1.50
1.11 3/4-16 UNF-2A [50.7] [38.1]
[28.1] THREAD

#6 SAE PORT
.25
1.50 [38.1] (2X)
[6.3]

Body Weight: .39 lbs (.18 kg)

BODY WEIGHT: .39 Lb. [.18 Kg.]
ORDERING INFORMATION
ORDERING INFORMATION
PB-FCF - - -
PB-FCF –
OPTIONS
– –
BODIES
Standard, Buna 00 Blank Without Body
Standard, Viton V0 N 1/4 NPTF Ports
OPTIONS S #6 SAE Ports BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 FLOW N 1/4 NPTF Ports
01.0 1 GPM S #6 SAE Ports
02.0 2 GPM
03.0 3 GPM
FLOW SETTING
04.0 4 GPM
01.0 1 GPM
05.0 5 GPM
02.0 2 GPM
06.0 6 GPM03.0 3 GPM
+/-15%
04.0 4 GPM
05.0 5 GPM
06.0 6 GPM
± 15%

without independent study, evaluation, and testing for suitability.

Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]

MECHANICAL FLOW CONTROLS

DE-FCF FIXED FLOW CONTROL VALVE, PRESSURE COMPENSATED

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, fixed pressure compensated, flow control valve.

OPERATION
The DE-FCF maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit downstream
of (1). The valve begins to respond to load changes when the flow through the valve creates a pressure differential
across the control orifice, in excess of the spring load. Consult chart for regulation performance. Reverse flow (1)
to (2) returns through the control orifice and is non-compensated.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Best stability version for high differential

circuits.

Pressure Drop (bar)

0 50 100 150 200
8 30

25
6
PERFORMANCE VALVE SPECIFICATIONS
20
Flow (GPM)

Flow (LPM)

Actual
4 Test Data (Cartridge Only) 15 Maximum Flow 8 GPM (30 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Pressure Drop (bar) 10
2 0 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
50 100 150 200
5 Filtration ISO 18/16/13
8 30
0 0 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
0 500 1000 1500 2000 2500 3000 25 Weight .32 lbs (.15 kg)
6
Pressure Drop (PSI) 20
Operating Fluid Media General Purpose Hydraulic Fluid
Flow (GPM)

Flow (LPM)

Port 2 to 1 Port 2 to 1 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)

4 15 Cavity DELTA 2W
10 Cavity Form Tool (Finishing) 40500000
2 Seal Kit 21191204
5

0 0
0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MF42
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-FCF – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPT Ports
S #8 SAE Ports

FLOW SETTING
01.0 1 GPM
02.0 2 GPM
03.0 3 GPM
04.0 4 GPM
05.0 5 GPM
06.0 6 GPM
07.0 7 GPM
08.0 8 GPM
± 15%

without independent study, evaluation, and testing for suitability.

Page MF43
MECHANICAL FLOW CONTROLS

SJ-FCF FIXED FLOW CONTROL VALVE, PRESSURE COMPENSATED

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, fixed pressure compensated, flow control valve.

OPERATION
The SJ-FCF maintains a constant flow rate out of (1) regardless of load pressure changes in the circuit downstream
of (1). The valve begins to respond to load changes when the flow through the valve creates a pressure differential
across the control orifice, in excess of the spring load. Consult chart for regulation performance. Reverse flow (1)
to (2) returns through the control orifice and is non-compensated.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

For adjustable setting see SJ-FCA.

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Flow Rate As specified from 5-25 GPM
(19-95 LPM)
Pressure Drop (BAR) Rated Operating Pressure 3500 PSI (241 bar)
0 50 100 150 200 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
25 Filtration ISO 18/16/13
90
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
20 Weight .65 lbs (.29 kg)
(GPM)

(LPM)
Flow (GPM)

Flow (LPM)

60 Operating Fluid Media General Purpose Hydraulic Fluid

15
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Flow
Flow

10 Cavity SUPER 2W
30 Cavity Form Tool (Finishing) 40500017
5 Seal Kit 21191400

0 0
0 500 1000 1500 2000 2500 3000
Pressure Drop (PSI)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MF44
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 1.29 lbs (.59 kg)

ORDERING INFORMATION

SJ-FCF – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N ¾ NPT Ports
S #12 SAE Ports

FLOW SETTING
0010 10 GPM
0025 25 GPM

Additional flow settings available upon request

without independent study, evaluation, and testing for suitability.

WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.delta-power.com mail: [email protected] • www.tecnord.com

Page MF45
MECHANICAL FLOW CONTROLS

without independent study, evaluation, and testing for suitability.

Page MF46
MECHANICAL FLOW CONTROLS

PRIORITY FLOW REGULATOR VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

5 3500 19 241 3/4-16 PP-FCQ MF48

10 3000 38 207 7/8-14 DF-FCQ MF50

10 3000 38 207 7/8-14 DF-FAP MF52

25 3000 95 207 1 5/16-12 SK-FCQ MF54

5 3500 19 241 3/4-16 PP-FCP MF56

10 3000 38 207 7/8-14 DF-FCP MF58

25 3000 95 207 1 5/16-12 SK-FCP MF60

LS STEERING PRIORITY

GPM PSI LPM BAR CAVITY MODEL PAGE

(1) (4) (2)

9 3000 34 207 7/8-14 DG-PDS MF62

(3) 20 3000 76 207 1 5/16-12 SO-PDS MF64

(1) (4) (2)

9 3000 34 207 7/8-14 DG-PDD MF66

(3) 20 3000 76 207 1 5/16-12 SO-PDD MF68

without independent study, evaluation, and testing for suitability.

Page MF47
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
OW CONTROLS
PP-FCQ ADJUSTABLE PRIORITY FLOW CONTROL VALVE
Delta Power Company
PP-FCQ Adjustable Priority Flow Control Valve 4484 Boeing Drive - Rockford, IL 61109
DESCRIPTION
DESCRIPTION
8 size, 3/4-16 thread, “Power” series, adjustable priority flow control valve.
8 size, 3/4-16 thread, “Power” series, adjustable priority flow control valve.
FCQ Adjustable PriorityOPERATION
Flow Control Valve
The PP-FCQ allows pressure compensated flow from (3) to (1) regulated by the pressure present at (3).
DESCRIPTION
OPERATION
Excess flow bypasses out (2).
8 size, 3/4-16
The thread,
PP-FCQ“Power” series,compensated
allows pressure adjustable priority flow
flow from (3)control valve. by the pressure present at (3).
to (1) regulated
Excess flow bypasses out (2).
OPERATION
FEATURES
The PP-FCQ allows pressure compensated flow from (3) to (1) regulated by the pressure present at (3).
FEATURES
Excess flow Hardened parts(2).
 bypasses for long life.
• Hardenedout
 parts for long life.
Industry common cavity.
• Industry common cavity.

FEATURES
1
 Hardened parts for long life.
Industry common
 HYDRAULIC SYMBOLcavity. VALVE SPECIFICATIONS
2 2 Nominal Flow 5 GPM (19 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
3 3 1
ISO 18/16/13
Filtration
1
HYDRAULIC SYMBOL
Media Operating Temperature
-40 to 250 F (-40 to 120 C)
Range
Weight .56 lbs.Test
(.25 data
kg) shown on this sheet, for condition of port
HYDRAULIC
Test data shown on this sheet,SYMBOL
for condition of port VALVEFluid
Operating SPECIFICATIONS
Media General(2) to tank.
Purpose Data onFluid
Hydraulic next page, for condition of port
2 (2) to tank. Data on next page, for condition of port
(3) to tank. 2 NominalTorque
Cartridge Flow (3)
5 to
GPMtank.
25 ft-lbs (33.8 Nm)
(19 LPM)
Requirements
Rated Operating PressurePOWER 3500
Cavity 3W PSI (241 bar)
ViscosityForm Range 4050002436 to 3000 SSU (3 to 647 cSt)
3 PERFORMANCE 3 Only)
Actual Test Data (Cartridge 1
Cavity Tool (Finishing)
21191106
Seal Kit
ISO 18/16/13
Filtration
Media Operating Temperature
-40 to 250 F (-40 to 120 C)
Range
PERFORMANCE Weight VALVE SPECIFICATIONS .56 lbs. (.25 kg)
Test data shown on this sheet, for condition of port Operating Fluid Media General Purpose Hydraulic Fluid
(2) Actual
to tank. Data
Test Dataon next page,
(Cartridge for condition of port
Only) Nominal Flow
Cartridge Torque
5 GPM (19 LPM)
(3) to tank. Rated Operating Pressure 25 ft-lbs (33.8 Nm)(241 bar)
3500 PSI
Requirements
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Cavity POWER 3W
Filtration ISO 18/16/13
FORMANCE Cavity Form Tool (Finishing) 40500024
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
al Test Data (Cartridge Only) Seal Kit 21191106
Weight .56 lbs (.25 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 25 ft-lbs (33.8 Nm)
Cavity POWER 3W
Cavity Form Tool (Finishing) 40500024
Seal Kit 21191106
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]

without independent study, evaluation, and testing for suitability.

Page MF48
NING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
n). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
MECHANICAL FLOW CONTROLS
FLOW CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
DIMENSIONS

1.13
[28.6]

1.50 1.25
.87 [22.2]
[38.1] [31.8]
HEX. .63
KNOB [15.9]

3
16" SOCKET HEX

EXTERNAL ADJ.

2.30
INTERNAL ADJ. [58.5]
TAMPER PROOF 3/8-24 UNF-2A
THREAD Ø.281 [7.1] (2X)
MTG. HOLE

.25 [6.3]
.58
[14.8]
1.17
3.95 [29.7]
[100.2]
3.21 .22 [5.5] 2.25
2.50
[57.2]
[81.4] [63.5]

3/4-16 UNF-2A
1.61 THREAD #6 SAE PORT
(3X)
[41.0]

.25 [6.4] 1.75 [44.5]

2.25 [57.2]

Body Weight: .56 lbs (.25 kg)

ORDERING INFORMATION BODY WEIGHT: .56 lbs [.25 kg]
PP-FCQ
ORDERING INFORMATION - - -
OPTIONS
PP-FCQ – – BODIES
–
External Adjust w/Locknut, Buna 00 Blank Without Body
External Adjust w/Locknut, Viton V0 N 1/4 NPTF Ports
Knob, Buna 0K S #6 SAE Ports
OPTIONS BODIES
Knob, Viton VK
External
Internal Adjust
Adjust, w/Locknut,
Buna 0I Buna 00 FLOW RANGE Blank Without Body
External Adjust w/Locknut,
Internal Adjust, Viton VI Viton V0 0.50 0.25 – 0.50 GPM N 1/4” NPTF Ports
Tamper Proof, Buna Knob, 0T Buna 0K 0.75 0.50 – 0.75 GPM S #6 SAE Ports
Tamper Proof, Viton Knob, VT Viton VK 1.25 0.75 – 1.25 GPM
Internal Adjust, Buna 0I 2.50 1.25 – 2.50 GPM
Internal Adjust, Viton VI 5.00 FLOW
2.50 – 5.00 GPM
Tamper Proof, Buna 0T 0.50 .25 - .50 GPM
Tamper Proof, Viton VT Tamper
0.75 Proof
.50 - .75 GPM
Fill1.25
in 4 Digit
.75 -Flow Setting
1.25 GPM
Example:
2.50 1.2501.0- 2.50
= 1.0GPM
GPM
5.00 2.50 - 5.00 GPM

Tamper Proof
Fill in 4 Digit Flow Setting
Example: 01.0 - 1.0 GPM

without independent study, evaluation, and testing for suitability.

WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product
Page described
MF49
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
MECHANICAL FLOW CONTROLS

DF-FCQ ADJUSTABLE PRIORITY FLOW CONTROL VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, adjustable priority flow control valve.

OPERATION
The DF-FCQ allows pressure compensated flow from (3) to (1) regulated by the pressure present at (3). Excess
flow bypasses out (2).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Test data shown on this sheet, for condition

of port (2) to tank. Data on next page, for
condition of port (3) to tank.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 10 GPM (38 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .56 lbs (.25 kg)
Pressure @ Port 1 (bar) Pressure
Operating Fluid Media@ Port 1 (bar) General Purpose Hydraulic Fluid
0 50 100 150 200 0 50 100 150 200
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
12 45 8 30
40 Cavity DELTA 3W
10
PERFORMANCE 25
Regulated Flow (GPM)

Regulated Flow (GPM)

Regulated Flow (LPM)

35 6 Cavity Form Tool (Finishing) 40500001
8 30 20
Actual Test Data (Cartridge Only) Seal Kit 21191206
25
6 4 15
20
4 15 10
10 2
2 Pressure @ Port 1 (bar) Pressure @ Port 1 (bar) 5
5
0 50 100 150 200 0 50 100 150 200
0 0 0 0
12 45 8 30
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Pressure @ Port 1 (PSI)
40 Pressure @ Port 1 (PSI)
10 25
Regulated Flow (GPM)

Regulated Flow (GPM)

Regulated Flow (LPM)

6-10 @ 6 gpm setting 6-10 @ 10 gpm setting
35 6 @ 2 gpm setting
2-05 2-05 @ 5 gpm setting
8 30 20
25
6 4 15
20
4 15 10
10 2
2 5
5
0 0 0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Pressure @ Port 1 (PSI) Pressure @ Port 1 (PSI)
6-10 @ 6 gpm setting 6-10 @ 10 gpm setting 2-05 @ 2 gpm setting 2-05 @ 5 gpm setting

without independent study, evaluation, and testing for suitability.

Page MF50
MECHANICAL FLOW CONTROLS

Pressure @ Port 2 (bar) Pressure @ Port 2 (bar)

0 50 100 150 200
0 50 100 150 200
12 Pressure @ Port 2 (bar) 45 8 Pressure @ Port 2 (bar) 30
0 50 100 150 200 40
10 0 50 100 150 200
M)(GPM)

12 25

Flow (LPM)
45

Flow (GPM)
35

Flow (LPM)
8 30
6
8 40
30
10 20
25

Flow (LPM)
Flow

Flow (GPM)
35

Flow (LPM)
25
ow (GP

6 6
8 30 4 15
20 20
Flated

Regulated
Regulated

Regulated
4 25
15 10
6
Regul

4 15
20
10 2
Regulated

Regulated
Regulated

Regulated
2 5
4 15
5 10
10 2
0 0 0 0
2 5
0 500 1000 1500 2000 2500 30005 0 500 1000 1500 2000 2500 3000
0 Pressure @ Port 2 (PSI) 0 0 Pressure @ Port 2 (PSI) 0
0 500 1000 1500 2000 2500 3000 0 5002-05 @ 21000
gpm setting 15002-05 @ 52000
gpm setting 2500 3000
6-10 @ 6 gpm setting 6-10 @ 10 gpm setting
Pressure @ Port 2 (PSI) Pressure @ Port 2 (PSI)
2-05 @ 2 gpm setting 2-05 @ 5 gpm setting
6-10 @ 6 gpm setting 6-10 @ 10 gpm setting
DIMENSIONS DF-FCQ
DF-FCQ

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-FCQ – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK
FLOW RANGE
2-05 2 to 5 GPM
6-10 6 to 10 GPM

without independent study, evaluation, and testing for suitability.

Page MF51
FLOW CONTROLS Delta Power Company
4484 Boeing Drive
MECHANICAL - Rockford,
FLOW IL 61109
CONTROLS

DF-FAP
DF-FAP Fully
FULLYAdjustable
ADJUSTABLEPriority Flow FLOW
PRIORITY Control Valve With
CONTROL VALVEBypass
WITH BYPASS
DESCRIPTION
DESCRIPTION
FLOW CONTROLS1010size, 7/8-14 thread, “Delta” series, fully adjustable priority flow control valve with bypass
Delta
size, 7/8-14 thread, “Delta” series, fully adjustable priority flow control Power
valve with bypass. Company
OPERATION 4484 Boeing Drive - Rockford, IL 61109
OPERATION
The
TheDF-FAP
DF-FAP allows pressurecompensated
allows pressure compensated flow
flow from
from (3)(1),
(3) to to regulated
(1), regulated
by theby the pressure
pressure present present
at (3). at (3).
DF-FAP Fully Excess Priority
Adjustable flow bypasses
Flow out (2). CanValve
Control be used as aBypass
With restrictive pressure compensated flow control when the
Excess flow bypasses out (2). Can be used as a restrictive pressure compensated flow control when the bypass
bypass port (2) is blocked.
port (2) is blocked.
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, fully adjustable priority flow control valve with bypass
FEATURES
FEATURES
• OPERATION
Hardened cage and spool for long life.
 Hardened cage and spool for long life.
• Industry common
Industry cavity.
common cavity.compensated flow from (3) to (1), regulated by the pressure present at (3).
The DF-FAP allows pressure
Excess flow bypasses out (2). Can be used as a restrictive pressure compensated flow control when the
bypass port (2) is blocked. When used as a bypass flow control in applications where
1 HYDRAULIC SYMBOL VALVE SPECIFICATIONS
the priority flow port will be blocked by external valving,
2
Maximum Regulated
FEATURES
Flow drop will
bypass pressure 10 GPM (38 LPM)
increase unless a small amount
2 Rated Operating of leakage is provided 3000
Pressure for thePSIpriority port. Consult factory.
(207bar)
 3 Hardened cage 1 and spool for long life.
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
 Industry common cavity.
3 Filtration ISO 18/16/13
Media Operating
-40 to 250 F (-40 to 120 C)
1 HYDRAULIC SYMBOL Temperature Range
VALVE SPECIFICATIONS
HYDRAULIC SYMBOL
When used as a bypass flow control in applications VALVE
Weight SPECIFICATIONS .40 lbs. (.18 kg)
where the priority flow port will be 2blocked by
Maximum Regulated Flow 10 GPM (38 LPM)
2
external valving, bypass pressure drop will increase
Operating
Max Regulated
Rated Fluid Media
Flow
Operating
Pressure General
300010PSI Purpose
GPM Hydraulic Fluid
(38 LPM)
(207bar)
3 1 for Cartridge
Rated
Viscosity Torque
Operating
Range Pressure 3000 PSI (207 bar)
unless a small amount of leakage is provided 30 ft-lbs (40.6 Nm) to 647 cSt)
36 to 3000 SSU (3
the3priority port. Consult factory. Requirements
Viscosity
FiltrationRange ISO 36 to 3000 SSU (3 to 647 cSt)
18/16/13
Cavity
Filtration
Media Operating DELTA ISO3W 18/16/13
-40 -40°
to 250 F (-40 toto120 C)
PERFORMANCE Temperature
Media
Cavity Operating
Form Tool Range
Temp. Range
(Finishing) 40500001 to 250°F (-40° 120°C)
When used as a bypass flow control in applications Weight
Weight .40 lbs. (.18(.18
kg)kg)
Actual Test Data (Cartridge Seal Kit 21191210.40 lbs
where the priorityOnly)
flow port will be blocked by Operating Fluid Media General Purpose HydraulicFluid
Fluid
Operating Fluid Media General Purpose Hydraulic
external valving,
Pressure @bypass pressure drop will increase
Port 1 (BAR) Pressure @ Port 2 (BAR)
Cartridge
Cartridge Torque Requirements
Torque 30 ft-lbs (40.6 Nm)
unless a small amount of leakage is provided for 30 ft-lbs (40.6 Nm) 200
0 the 50
priority port.100 150
Consult factory. 200 Requirements
Cavity 0 50 100 DELTA 1503W
PERFORMANCE
12 45 12
Cavity
Cavity Form Tool (Finishing) DELTA 3W
40500001 45
40 Seal Kit Form Tool (Finishing) 21191210 40
PERFORMANCE
Actual
10 Test Data (Cartridge Only) Cavity
10 40500001
Regulated Flow (LPM)

Regulated Flow (LPM)

Regulated Flow (GPM)
Regulated Flow (GPM)

35 35
Actual
8 Test Data (Cartridge Only) Seal
8
Kit 21191210
30 30
Pressure @ Port 1 (BAR) 25 Pressure @ Port 2 (BAR) 25
6 6
0 50 100 150 20020 0 50 100 150 200 20
4 12 1545 412 15
45
1040 10
40
2 10 210
Regulated Flow (LPM)

Regulated Flow (LPM)

Regulated Flow (GPM)
Regulated Flow (GPM)

5 35 5
35
0 8 0 30 08 0
30
0 500 1000 1500 2000 2500 3000 25 0 500 1000 1500 2000 2500
300025
6 6
Pressure @ Port 1 (PSI) 20 Pressure @ Port 2 (PSI) 20
4 GPM setting
2 6 GPM setting 10 GPM setting 15 4 2 GPM setting 6 GPM setting 10 GPM setting 15
10 10
2 2
5 5
0 0 0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Pressure @ Port 1 (PSI) Pressure @ Port 2 (PSI)
2 GPM setting 6 GPM setting 10 GPM setting 2 GPM setting 6 GPM setting 10 GPM setting

WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 6 / 2020

(herein). Any specific

without independent study, application should
evaluation, and testing not be undertaken without independent study, evaluation, and testing for suitability.
for suitability.

Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]

4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.delta-power.com mail: [email protected] • www.tecnord.com
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein).
Page MF52 Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
DIMENSIONS

2.50 [63.4]
1.25
[31.7]

1.52 1.00 HEX .75

[38.7] [25.4] 1.50
[19.0]
[38.1]

WITH KNOB

STANDARD 3/8-24 UNF-2A

2.58
[65.5] 1.97
[50.0]
2.61
[66.3] 2.00
[50.8] .62
[15.9]
1.37
[34.8]
2.12
2.50 [53.8]
[63.4]
#6 SAE PORT
(3X)
1.81 7/8-14 UNF-2A
[46.0]
Ø.281 [7.1]
.12 [3.2] 2.25 [57.1] MTG HOLE (2X)

Body Weight: .60 lbs (.27 kg)

ORDERING INFORMATION
ORDERING INFORMATION
DF-FAPDF-FAP
- –
- –
- –
OPTIONS BODIES
Buna, Standard 00 Blank Without Body
Viton, Standard OPTIONS
V0 N 3/4 NPTF Ports BODIES
Buna, KnobBuna 0K Standard 00 S #12 SAE PortsBlank Without Body
Viton, Knob Viton Standard
VK V0 N 3/4” NPTF Ports
Buna, Knob 0K FLOW SETTING S #12 SAE Ports
Viton, Knob VK
XXXX 1 to 10 GPM
FLOW SETTING
XXXX
PRESET1 to 10 GPM
Example 0005 = 5 GPM +/- 10%
Preset & Tamper Proof
Example: 0005 - 5 GPM ±10%

without independent study, evaluation, and testing for suitability.

Page MF53

WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
MECHANICAL FLOW CONTROLS

SK-FCQ ADJUSTABLE PRIORITY FLOW CONTROL VALVE

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, adjustable priority flow control valve.

OPERATION
The SK-FCQ allows pressure compensated flow from (3) to (1) regulated by the pressure present at (3). Excess
flow bypasses out (2). The spring chamber is constantly vented at (1).

FEATURES
• Hardened cage and spool for long life.
• Industry common cavity.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Max Regulated Flow 25 GPM (95 LPM)
Rated Operating Pressure 500-3000 PSI (34-207 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .96 lbs (.44 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Cavity SUPER 3W
PERFORMANCE Pressure @ Port 2 (bar) Cavity Form Tool (Finishing)Pressure
@ Port40500018
1 (bar)
0 50 100 150 200 Seal Kit0 50 100 150
21191404 200
Actual Test Data (Cartridge Only)
20 75 20 75
Regulated Flow (GPM)

Flow (GPM)
Flow (LPM)

Regulated Flow (LPM)

15 15
Pressure @ Port 2 (bar) Pressure @ Port 1 (bar)
50 50
0 50 100 150 200 0 50 100 150 200
1020 75 10
20 75
Regulated Flow Regulated

Regulated Flow Regulated

25 25
Regulated Flow (GPM)

(GPM)
(LPM)

515 155 Regulated Flow (LPM)

50 50

010 0 100 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
25 25
5 Pressure @ Port 2 (PSI) 5 Pressure @ Port 1 (PSI)
priority port 1 loaded, bypass port 2 unloaded
bypass port 2 loaded, priority port 1 unloaded
0 0 0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Pressure @ Port 2 (PSI) Pressure @ Port 1 (PSI)
priority port 1 loaded, bypass port 2 unloaded
bypass port 2 loaded, priority port 1 unloaded

without independent study, evaluation, and testing for suitability.

Page MF54
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 2.46 lbs (1.11 kg)

ORDERING INFORMATION

SK-FCQ – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4” NPTF Ports
Buna, Knob 0K S #12 SAE Ports
Viton, Knob VK
Buna, Internally Adj. 0I FLOW SETTING
Viton, Internally Adj. VI XXXX 1 to 25 GPM
Buna, Tamper Proof 0T
Preset & Tamper Proof
Viton, Tamper Proof VT
Example: 0015 - 15 GPM ±10%

without independent study, evaluation, and testing for suitability.

Page MF55
FLOW CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
MECHANICAL FLOW CONTROLS

W CONTROLS
PP-FCP Fixed Priority Flow Control Valve
PP-FCP FIXED PRIORITY FLOW CONTROL VALVE
Delta Power Company
DESCRIPTION 4484 Boeing Drive - Rockford, IL 61109
8 DESCRIPTION
size, 3/4-16 thread, “Power” series, fixed priority flow control valve.
8 size, 3/4-16 thread, “Power” series, fixed priority flow control valve.
CP Fixed Priority Flow Control Valve
OPERATION
The PP-FCP allows pressure compensated flow from (3) to (1) regulated by the pressure present at (3).
DESCRIPTION
OPERATION
Excess flow bypasses out (2).
8 size, 3/4-16The
thread, “Power”
PP-FCP allows series,
pressurefixed priority flow
compensated flowcontrol
from (3)valve.
to (1) regulated by the pressure present at (3).
Excess flow bypasses out (2).
OPERATION
The PP-FCP allows pressure compensated flow from (3) to (1) regulated by the pressure present at (3).
FEATURES
FEATURES
Excess flow •bypasses outparts
Hardened
 Hardened (2).
parts
for for
longlong
life.life.
 Industry common cavity.
• Industry common cavity.

1
FEATURES
 Hardened parts for long life. Test data shown on this sheet, for condition of port
2 Industry common cavity. (2) to tank. Data on next page, for condition of port
HYDRAULIC SYMBOL (3) to tank.
VALVE SPECIFICATIONS
2 Nominal Flow 5 GPM (19 LPM)
1
3 Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
3 1
HYDRAULIC SYMBOL Filtration ISO 18/16/13
2 Media Operating Temperature
-40 to 250 F (-40 to 120 C)
HYDRAULIC SYMBOL VALVE SPECIFICATIONS
Range
Weight .56 lbs.
(19(.25 kg)
2 sheet, for condition of port Nominal
Test data shown on this Flow 5 GPM LPM)
Operating Fluid Media General Purpose Hydraulic Fluid
3 (2) to tank. Data on next page, for condition of port Rated Cartridge
(3) to tank.
Operating Pressure
Torque 3500 PSI (241 bar)
25 ft-lbs (34 Nm)
Requirements
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
3 1 Cavity POWER 3W
Filtration ISO 18/16/13
PERFORMANCE Cavity Form Tool (Finishing) 40500024
Actual Test Data (Cartridge Only) Media Seal
Operating
Kit Temperature 21191106
-40 to 250 F (-40 to 120 C)
Range
Weight .56 lbs. (.25 kg)
PERFORMANCE
Test data shown on this sheet, for condition of port VALVE SPECIFICATIONS
Operating Fluid Media General Purpose Hydraulic Fluid
(2) toActual
tank. Test
DataData
on next page,Only)
(Cartridge for condition of port Cartridge Torque
Maximum Flow 5 GPM (19 LPM)
(3) to tank. 25 ft-lbs (34 Nm)
Requirements
Rated Operating Pressure 3500 PSI (241 bar)
Cavity Viscosity Range POWER 3W36 to 3000 SSU (3 to 647 cSt)
ORMANCE Cavity Form Tool (Finishing)
Filtration 40500024 ISO 18/16/13
Test Data (Cartridge Only) Seal Kit Media Operating Temp. 21191106
Range -40° to 250°F (-40° to 120°C)
Weight .56 lbs (.25 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
Cavity POWER 3W
Cavity Form Tool (Finishing) 40500024
Seal Kit 21191106

without independent study, evaluation, and testing for suitability.

Page MF56
NG: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
. Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
DIMENSIONS

1.13
[28.6]

1.25
[31.8]
.63
[15.9]

.22 [5.5]
1.18 Ø.281 [7.1] (2X)
2.82 [29.9] MTG. HOLE
[71.6]
3/4-16 UNF-2A .25 [6.3]
1.61 THREAD .58
[14.8]
1.17
[41.0] [29.7]

2.25
[57.2] 2.50
[63.5]

#6 SAE PORT
(3X)

.25 [6.4] 1.75 [44.5]

2.25 [57.2]

Body Weight: .56 lbs (.25 kg)

ORDERING INFORMATION BODY WEIGHT: .56 lbs [.25 kg]
PP-FCP
ORDERING INFORMATION - - -
OPTIONS
PP-FCP – – BODIES
–
Standard, Buna 00 Blank Without Body
Standard, Viton V0 N 1/4 NPTF Ports
S #6 SAE Ports
OPTIONS BODIES
Buna Standard 00 Blank Without Body
FLOW SETTING
Viton Standard V0 N 1/4 NPTF Ports
01.0 1.0 GPM
S #6 SAE Ports
02.0 2.0 GPM
03.0 3.0 GPM
04.0 4.0 GPM
05.0 5.0 GPMFLOW SETTING
01.0 1 GPM
+/-15%
02.0 2 GPM
03.0 3 GPM
04.0 4 GPM
05.0 5 GPM
± 15%

without independent study, evaluation, and testing for suitability.

Page MF57
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
MECHANICAL FLOW CONTROLS

DF-FCP FIXED PRIORITY FLOW CONTROL VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, fixed priority flow control valve.

OPERATION
The DF-FCP allows pressure compensated flow from (3) to (1) regulated by the pressure present at (3). Excess
flow bypasses out (2). The spring chamber is constantly vented at (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Maximum Flow 10 GPM (38 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .26 lbs (.12 kg)
Pressure @ Port 1 (bar) Pressure @ Port 2 (bar)
Operating Fluid Media General Purpose Hydraulic Fluid
0 50 100 150 200 0 50 100 150 200
12 45 12Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
45
40 Cavity DELTA 3W 40
10 10
PERFORMANCE
Regulated Flow (GPM)

Regulated Flow (GPM)

35 Cavity Form Tool (Finishing) 40500001 35

Regulated Flow (LPM)

8 30 8 30
Actual Test Data (Cartridge Only) Seal Kit 21191206
25 25
6 6
20 20
4 15 4 15
Pressure @ Port 1 (bar) 10 Pressure @ Port 2 (bar) 10
2 2
0 50 100 150 200
5 0 50 100 150 5 200
120 0 45 0 12 0 45
0 500 1000 1500 2000 2500 3000 40 0 500 1000 1500 2000 2500 3000 40
10 10
Pressure @ Port 1 (PSI) Pressure @ Port 2 (PSI)
Regulated Flow (GPM)

Regulated Flow (GPM)

35 35
Regulated Flow (LPM)

Regulated Flow (LPM)

8 5 gpm setting 10 gpm setting 30 8 5 gpm setting 10 gpm setting 30
25 25
6 6
20 20
4 15 4 15
10 10
2 2
5 5
0 0 0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Pressure @ Port 1 (PSI) Pressure @ Port 2 (PSI)

5 gpm setting 10 gpm setting 5 gpm setting 10 gpm setting

without independent study, evaluation, and testing for suitability.

Page MF58
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-FCP – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

FLOW SETTING
01.0 1 GPM
02.0 2 GPM
03.0 3 GPM
04.0 4 GPM
05.0 5 GPM
06.0 6 GPM
07.0 7 GPM
08.0 8 GPM
09.0 9 GPM
10.0 10 GPM
± 15%

without independent study, evaluation, and testing for suitability.

Page MF59
MECHANICAL FLOW CONTROLS

SK-FCP FIXED PRIORITY FLOW CONTROL VALVE

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, fixed priority flow control valve.

OPERATION
The SK-FCP allows pressure compensated flow from (3) to (1) regulated by the pressure present at (3).
Excess flow bypasses out (2). The spring chamber is constantly vented at (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

For adjustable setting see SK-FCQ.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Priority Flow Rate As specified from 5-25 GPM
(19-95 LPM)
Rated Operating Pressure 500-3000 PSI (34-207 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .85 lbs (.39 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
PERFORMANCE Pressure @ Port 2 (BAR) Cavity SUPER 3W
Pressure @ Port 1 (BAR)
0 Data (Cartridge
Actual Test 50 Only)100 150 200 Cavity Form
0 Tool (Finishing)
50 100 40500018
150 200
25 Seal25
Kit 21191404
90 90

Regulated Flow (LPM)

Regulated Flow (GPM)

20
Regulated Flow (LPM)

75 20 75
Regulated Flow (GPM)

Pressure @ Port 2 (BAR) Pressure @ Port 1 (BAR)

15 60 60
15
0 50 100 150 200 0 50 100 150 200
25 45 45
25
10 90 10 90
30 30

Regulated Flow (LPM)

Regulated Flow (GPM)

20 5
Regulated Flow (LPM)

75 5 20 75
Regulated Flow (GPM)

15 15
15 0 60 60
0 0 15 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
45 45
10 Pressure @ Port 2 (PSI) 10 Pressure @ Port 1 (PSI)
30 30
- Bypass port 2 loaded, priority port 1 unloaded - Priority port 1 loaded, bypass port 2 unloaded
5 5
15 15

0 0 0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Pressure @ Port 2 (PSI) Pressure @ Port 1 (PSI)
- Bypass port 2 loaded, priority port 1 unloaded - Priority port 1 loaded, bypass port 2 unloaded

without independent study, evaluation, and testing for suitability.

Page MF60
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 2.46 lbs (1.11 kg)

ORDERING INFORMATION

SK-FCP – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4 NPTF Ports
S #12 SAE Ports

FLOW SETTING
001
0 10 GPM
002
5 25 GPM

Additional flow settings available upon request

without independent study, evaluation, and testing for suitability.

Page MF61
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
FLOW CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
DG-PDS STEERING PRIORITY FLOW CONTROL VALVE WITH STATIC LOAD SENSE
DG-PDS Steering Priority Flow Control Valve with Static Load Sense
DESCRIPTION
DESCRIPTION
DG-PDS Steering Priority Flow Control Valve with Static Load Sense
1010size,
size,7/8-14
7/8-14thread,
thread, “Delta” series, steering
“Delta” series, steeringpriority
priorityflow
flow control
control valve
valve with
with static
static loadload sense.
sense.
W CONTROLS DESCRIPTION Delta Power Company
OPERATION
10 size, 7/8-14 thread, “Delta” series, steering priority flow
OPERATION 4484control
Boeingvalve
Drivewith static load
- Rockford, IL sense.
61109
The
TheDG-PDS
DG-PDS allows priorityflow
allows priority flowfrom
from
(2)(2) to (1)
to (1) regardless
regardless of pressure
of load load pressure at port
at either either
(1) port (1)(3).
or port or port (3).
OPERATION
Excess flow bypasses out (3).
Excess flow bypasses out (3). Port (4) is the load sense port.
The DG-PDS allows priority flow from (2) to (1) regardless of load pressure at either port (1) or port (3).
PDS Steering Priority FlowPort
Control
(4) isflow
Excess
Valve withport.
the bypasses
load senseout
Static
(3).
Load Sense
FEATURES
DESCRIPTION
1 7/8-14
10 size, Port (4) is “Delta”
• thread,
FEATURES
the load
Hardened cage sense port.
and spool
series, for long
steering life. flow control valve with static load sense.
priority
• Industry common cavity.
1
OPERATION  Hardened cage and spool for long life.
FEATURES
The2DG-PDS allows  priority common
Industry flow fromcavity.
(2) to (1) regardless of load pressure at either port (1) or port (3).
Excess flow bypasses out (3). cage and spool for long life.
Hardened
2  Industry common cavity.
Port (4) is the load sense port.
HYDRAULIC SYMBOL VALVE SPECIFICATIONS
3 4 1 3
Max Regulated Flow 9 GPM (34 LPM)
1 3
FEATURESHYDRAULIC SYMBOL VALVE SPECIFICATIONS
Rated Operating Pressure 3000 PSI (207 bar)
4 1 3 Max Regulated Flow
4 Viscosity Range 369to
GPM3000 (34
SSULPM)(3 to 647 cSt)
 Hardened cage and spool for long life. Rated Operating Pressure 3000 PSI (207 bar)
2  Industry common cavity. Filtration ISO 18/16/13
4 Viscosity
Media Operating Range 36 to 3000 SSU (3 to 647 cSt)
-40 to 250 F (-40 to 120 C)
HYDRAULIC SYMBOL Temperature
Filtration
VALVE Range
SPECIFICATIONS ISO 18/16/13
HYDRAULIC SYMBOL 2 Weight
Media Operating
VALVE SPECIFICATIONS 0.38 lbs. (0.17 kg)
3 Max Regulated Flow
Temperature
Operating FluidRange
Media
-409 to
GPM250(34FLPM)
(-40 to 120 C)
4 1 3 Max RegulatedRatedFlow
Operating Pressure9 GPM
(34 General
LPM)3000Purpose Hydraulic Fluid
PSI (207 bar)
2 Weight
Cartridge Torque 0.38 lbs. (0.17 kg)
Rated Operating Pressure
Viscosity Range 3000 PSI (207 bar)
30 ft-lbs (40.6
36 to 3000Nm)
SSU (3 to 647 cSt)
Requirements
Operating Fluid Media General Purpose Hydraulic Fluid
4 Viscosity Range
Filtration
Cavity
Cartridge Torque
36 to 3000 SSU (3
ISOto18/16/13
DELTA 4W
647 cSt)
Filtration Media Operating Temp.ISO 18/16/13
Range 30 ft-lbs
-40° to(40.6
250°FNm)
(-40° to 120°C)
PERFORMANCE Requirements
Cavity Form Tool (Finishing) 40500002
Media Operating
Weight
Cavity DELTA0.38 lbs
4W (.17 kg)
Actual Test Data (Cartridge Only) Temperature Seal Kit
Range
-40 to 25021191214
F (-40 to 120 C)
PERFORMANCE Operating
Cavity Form Fluid Tool
Media(Finishing)
General Purpose Hydraulic Fluid
40500002
2 Weight 0.38 lbs. (0.17 kg)
Actual Test Data (Cartridge Only) Cartridge
Seal KitTorque Requirements 30 ft-lbs (40.6 Nm)
21191214
Operating Fluid
CavityMedia
General PurposeDELTA Hydraulic
4W Fluid
PERFORMANCE Cartridge Torque
30 ft-lbs
Cavity Form Tool (Finishing) (40.6 Nm) 40500002
Requirements
Actual Test Data (Cartridge Only) Seal Kit 21191214
Priority port 1 loaded, bypass port 3 unloaded Cavity DELTA
Bypass port 4W priority port 1 unloaded
3 loaded,
FORMANCE (100 PSI spring option) Cavity Form Tool (Finishing) 40500002 (100 PSI spring option)
al Test Data (Cartridge Only)
Pressure at port 1 (BAR)
Priority port 1 loaded, bypass port 3 unloaded Seal Kit Pressure
21191214 at Port
Bypass port 3 loaded, 3 (BAR)
priority port 1 unloaded
0 50 (100 PSI100
spring option)
150 200 0 50 100
(100 PSI 150
spring option) 200
8 Pressure at port 1 (BAR) 30 8 Pressure at Port 3 (BAR) 30
Regulated Flow (GPM)

Regulated Flow (LPM)

Regulated Flow (GPM)

Regulated Flow (LPM)

0 50 100 150 200 25 0 50 100 150 20025

68 30 68 30
Regulated Flow (GPM)

Regulated Flow (LPM)

Regulated Flow (GPM)

Regulated Flow (LPM)

20 20
Priority 25 Bypass port 3 loaded, priority port 1 unloaded 25
46port 1 loaded, bypass port 3 unloaded 15 46 15
(100 PSI spring option) 20 (100 PSI spring option) 20
Pressure at port 1 (BAR) 10 Pressure at Port 3 (BAR) 10
24 15 0 2 450 15
0 50 100 150 200 5 100 150 200
5
8 30 10 8 30 10
Regulated Flow (GPM)

Regulated Flow (LPM)

02 0 02 0
0 500 1000 1500 2000 25
2500 3000 5 0 500 1000 1500 2000 25
2500 3000 5
6 6
0 Pressure at port 1 (PSI) 20 0 Pressure at Port 3 (PSI) 20
0 0
0 500 1000 Port
1500
2 to 1 2000 2500 3000 0 500 1000Port1500
2 to 1 2000 2500 3000
4 15 4 15
Pressure at port 1 (PSI) Pressure at Port 3 (PSI)
10 10
2 Port 2 to 1 2 Port 2 to 1
5 5
0 0 sheets are intended only
WARNING: the specifications/application data shown in our catalogs and data 0 as a general guide for the product described (herein). Any specific application should0not be undertaken
W 6 / 2020

0 WARNING: The
1000specifications/application
500 independent
without study, 1500 2000
evaluation, and data shown
2500
testing for suitability. 3000 in our catalogs and0 data sheets 500 are1000 intended1500 only as 2000a general2500 guide for the product described
3000
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Pressure at port 1 (PSI) Pressure at Port 3 (PSI)
WARNING: The Phone: (815) 397-6628 data shown in our Fax:
specifications/application catalogs(815)and 397-2526
data sheets are intended E-mail: [email protected]
Port 2 to 1 Port 2onlyto 1as a general guide for the product described
(herein). Any
4484 Boeing specific
Drive Rockford,application
IL 61109 • USA should
• Phonenot be undertaken
+1 (815) 397-6628 • Faxwithout independent
+1 (815) 397-2526 study, evaluation,
Via Malavolti, and testing
36 • 41122 Modena for suitability.
• ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
Phone: (815) 397-6628
mail: [email protected] • www.delta-power.com Fax: (815) mail:
397-2526
[email protected] E-mail: [email protected]
• www.tecnord.com

Page MF62
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
DIMENSIONS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION
ORDERING INFORMATION
DG-PDS - - -
DG-PDS – – –
OPTIONS BODIES
Buna Standard 00 Blank Without Body
V0
Viton Standard OPTIONS N 3/4 NPTF Ports BODIES
Buna Standard, Screen A0 S #12 SAE Ports
Buna Standard 00 Blank Without Body
Viton Standard, Screen W0
Viton Standard V0 N 3/4 NPTF Ports
PRESSURE SETTING
Buna Standard, Screen A0 S #12 SAE Ports
Screen located at CF (1) port 0100 100 PSI
Viton Standard, Screen W0
0150 150 PSI
PRESSURE SETTING
0250 250 PSI
0100 120 PSI
Screen located at CF (1) port 0150 300 PSI
0250 250 PSI

without independent study, evaluation, and testing for suitability.

Page MF63
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
FLOW CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
SO-PDS STEERING PRIORITY FLOW CONTROL VALVE WITH STATIC LOAD SENSE
SO-PDS Steering Priority Flow Control Valve with Dynamic Load Sense
DESCRIPTION
DESCRIPTION
SO-PDS Steering Priority Flow Control Valve with Dynamic Load Sense
16size,
16 size, 1 5/16-12
1 5/16-12 thread,
thread, “Super”
“Super” series,
series, steering
steering priority
priority flow control
flow control valve valve withload
with static dynamic load sense.
sense.
DESCRIPTION
16OPERATION
size, 1 5/16-12 thread, “Super” series, steering priority flow control valve with dynamic load sense.
OPERATION
TheSO-PDS
The SO-PDS allows
allows priority
priority flow flow
from from
(3) to (3) to (4) regardless
(4) regardless of load pressure
of load pressure at either
at either port port(4).
(2) or port (2) or port (4).
OPERATION
Excess flow bypasses out (2).
Excess flow bypasses out (2). Port (1) is the load sense port.
The SO-PDS allows priority flow from (3) to (4) regardless of load pressure at either port (2) or port (4).
Port (1)
Excess is bypasses
flow the load sense port.
out (2).
FEATURES
Port
• (1) is the load
Hardened cagesense port.for long life.
and spool
FEATURES
• Industry common cavity.
• Hardened cage and spool for long life.
FEATURES
• Industry common cavity.
• Hardened cage and spool for long life.
• Industry common cavity.
HYDRAULIC SYMBOL VALVE SPECIFICATIONS
Max Regulated Flow 20 GPM (76 LPM)
HYDRAULIC SYMBOL VALVE SPECIFICATIONS
Rated Operating Pressure 3000 PSI (207 bar)
Max Regulated
Viscosity RangeFlow 2036GPM (76 LPM)
to 3000 SSU (3 to 647 cSt)
Rated Operating
Filtration Pressure 3000 PSI (207 bar)
ISO 18/16/13
Viscosity Range
Media Operating 36 to 3000 SSU (3 to 647 cSt)
-40° to 250° F (-40° to 120° C)
HYDRAULIC SYMBOL Temperature
Filtration
VALVE Range
SPECIFICATIONS ISO 18/16/13
Weight
Media Operating x.xx lbs. (.xx kg)
Max Regulated Flow -40°20toGPM
250°(76F (-40°
LPM) to 120° C)
Temperature
Operating Fluid Range
Media General Purpose Hydraulic Fluid
(1) (4) (2) Rated Operating Pressure 3000 PSI (207 bar)
Weight
Cartridge Torque x.xx lbs. (.xx kg)
Viscosity Range 9036ft-lbs (122SSU
to 3000 Nm) (3 to 647 cSt)
Requirements
Operating Fluid Media General Purpose Hydraulic Fluid
Filtration ISO 18/16/13
Cavity Torque
Cartridge SUPER 5WS
Media Operating Temp. Range 90 ft-lbs
-40° to(122 Nm)
250°F (-40° to 120°C)
PERFORMANCE Requirements
Cavity Form Tool (Finishing) 40500020
Weight
Cavity SUPER1.05 lbs
5WS (.48 kg)
Actual Test Data (Cartridge Only) Seal Kit 21191410
PERFORMANCE (3) Operating
Cavity Form FluidTool
Media(Finishing)
General Purpose Hydraulic Fluid
40500020
Actual Test Data (Cartridge Only) Cartridge
Seal Kit Torque Requirements 90 ft-lbs (122 Nm)
21191410
Cavity SUPER 5WS
PERFORMANCE Cavity Form Tool (Finishing) 40500020
Actual Test Data (Cartridge Only) Seal Kit 21191410
Bypass port 2 loaded, priority port 4 unloaded Priority port 4 loaded, bypass port 2 unloaded
Pressure at Port 2 (BAR) Pressure at Port 4 (BAR)
Bypass
0 port50
2 loaded, priority
100 port 4150
unloaded 200 0Priority port
504 loaded, 100
bypass port150
2 unloaded 200
20 75 20 75
Pressure at Port 2 (BAR) Pressure at Port 4 (BAR)
Regulated Flow (GPM)

Regulated Flow (LPM)

Regulated Flow (GPM)

0 50 100 150 200

Regulated Flow (GPM)

0 50 100 150 200
20 15 60 60
75 2015 75
Regulated Flow (GPM)

Regulated Flow (LPM)

Regulated Flow (GPM)

45 45
60 60
15 10 1510
30 30
45 45
10 5 10 5
15 15
30 30
5 0 0 50 0
15 15
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
0 Pressure at Port 2 (PSI) 0 Pressure at Port 4 (PSI)
0 0
0 500Port 31000
to 4 1500
Port 3 to2000
4 25003 to 43000
Port 0 500 Port 1000
3 to 4 1500
Port 3 to2000
4 2500
Port 3 to 4 3000
Pressure at Port 2 (PSI) Pressure at Port 4 (PSI)
Port 3 to 4 Port 3 to 4 Port 3 to 4 Port 3 to 4 Port 3 to 4 Port 3 to 4

WARNING: The
without independent specifications/application
study, evaluation, and testing for suitability.data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628
WARNING: The specifications/application data shown in our catalogs Fax: and(815) 397-2526
data sheets are intended E-mail:
only [email protected]
a general guide for the product described
(herein). Any
4484 Boeing specific
Drive application
Rockford, should
IL 61109 • USA • Phonenot
+1 be
(815)undertaken
397-6628 • Faxwithout independent
+1 (815) 397-2526 Via study,
Malavolti,evaluation, and testing
36 • 41122 Modena • ITALY •for suitability.
Phone +39 (059) 254895 • Fax +39 (059) 253512
Phone: (815) 397-6628
mail: [email protected] • www.delta-power.com Fax: (815) 397-2526
mail: [email protected]: [email protected]
• www.tecnord.com

Page MF64
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 3.76 lbs (1.62 kg)

ORDERING INFORMATION

SO-PDS – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4 NPTF Ports
S #12 SAE Ports

PRESSURE SETTING
0120 120 PSI
0300 300 PSI

without independent study, evaluation, and testing for suitability.

Page MF65
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
FLOW CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
DG-PDD STEERING PRIORITY FLOW CONTROL VALVE WITH DYNAMIC LOAD SENSE
DG-PDD Steering Priority Flow Control Valve with Dynamic Load Sense
DESCRIPTION
DESCRIPTION
DG-PDD Steering Priority Flow Control Valve with Dynamic Load Sense
1010size,
size,7/8-14
7/8-14thread,
thread, “Delta” series, steering
“Delta” series, steeringpriority
priorityflow
flow control
control valve
valve with
with dynamic
dynamic loadload sense.
sense.
W CONTROLS DESCRIPTION Delta Power Company
OPERATION
10 size, 7/8-14 thread, “Delta” series, steering priority flow
OPERATION 4484control
Boeingvalve
Drivewith dynamic IL
- Rockford, load sense.
61109
The
TheDG-PDD
DG-PDD allows priorityflow
allows priority flowfrom
from
(2)(2) to (1)
to (1) regardless
regardless of pressure
of load load pressure at port
at either either
(1) port (1)(3).
or port or port (3).
OPERATION
Excess flow bypasses out (3).
Excess flow bypasses out (3). Port (4) is the load sense port.
PDD Steering Priority FlowThe
Control
DG-PDD Valve with
allows Dynamic
priority flow fromLoad
(2) to Sense
(1) regardless of load pressure at either port (1) or port (3).
Port (4) isflow
Excess the bypasses
load senseoutport.
(3).
DESCRIPTION
FEATURES
1 7/8-14
10 size, • thread,
Port
FEATURES
(4) is “Delta”
the load
Hardened cageseries,
sense steering
port.
and spool priority
for long life. flow control valve with dynamic load sense.
• Industry common cavity.
OPERATION
1  Hardened cage and spool for long life.
The2DG-PDDFEATURES
allows
 priority common
Industry flow fromcavity.
(2) to (1) regardless of load pressure at either port (1) or port (3).
Excess flow bypasses
 out (3). cage and spool for long life.
Hardened
2  Industry common cavity.
Port (4) is the load sense port.
HYDRAULIC SYMBOL VALVE SPECIFICATIONS
3
Max Regulated Flow
4 1 3 9 GPM (34 LPM)
1 FEATURESHYDRAULIC SYMBOL VALVE SPECIFICATIONS
3 Rated Operating Pressure 3000 PSI (207 bar)
4 1 3 Max Regulated Flow 369to
GPM (34 LPM)
4  Hardened cage and spool for long life. Viscosity Range 3000 SSU (3 to 647 cSt)
2  Industry common cavity.
Rated
Filtration Operating Pressure 3000 PSI
ISO 18/16/13 (207 bar)
4 Viscosity
Media OperatingRange 36 to 3000 SSU (3 to 647 cSt)
-40 to 250 F (-40 to 120 C)
HYDRAULIC SYMBOL Temperature
Filtration
VALVE Range
SPECIFICATIONS ISO 18/16/13
HYDRAULIC SYMBOL VALVE SPECIFICATIONS
Weight
Media Operating 0.38 lbs. (0.17 kg)
3 2
Max Regulated Flow
Temperature
-409 to
GPM250(34FLPM)
(-40 to 120 C)
4 1 3 Max Regulated Flow FluidRange
Operating Media9 GPM (34 General
LPM) Purpose Hydraulic Fluid
Rated Operating Pressure 3000 PSI (207 bar)
2 Weight
Cartridge
Rated Operating Torque 3000 PSI (207
Pressure 0.38
bar)lbs. (0.17 kg)
Viscosity Range 30 ft-lbs (40.6
36 to 3000Nm)
SSU (3 to 647 cSt)
Requirements
Operating Fluid Media General 647 cSt) Hydraulic Fluid
Purpose
4 Viscosity Range
Filtration 36 to 3000 SSU (3 ISOto18/16/13
Filtration Cavity
Cartridge Torque ISO 18/16/13
Media Operating Temp. Range
DELTA 4W
30 ft-lbs
-40° to(40.6
250°FNm)
(-40° to 120°C)
PERFORMANCE Media Operating
Requirements
Cavity Form Tool (Finishing) 40500002
Weight
Cavity -40 to 250 F 0.38tolbs
(-40
DELTA 4W (.17 C)
120 kg)
Actual Test Data (Cartridge Only) Temperature Seal Kit
Range 21191214
PERFORMANCE Operating
Cavity Form Fluid Tool
Media(Finishing)
General Purpose Hydraulic Fluid
2 Weight 0.38 lbs. (0.1740500002
kg)
Actual Test Data (Cartridge Only) Cartridge
Seal KitTorque Requirements 30 ft-lbs (40.6 Nm)
21191214
Operating Fluid Media General Purpose Hydraulic Fluid
Cavity DELTA 4W
PERFORMANCE Cartridge Torque
30 ft-lbs
Cavity Form Tool (Finishing) (40.6 Nm) 40500002
Requirements
Actual Test Data (Cartridge Only) Cavity Seal Kit DELTA 4W 21191214
Priority port 1 loaded, bypass port 3 unloaded Bypass port 3 loaded, priority port 1 unloaded
FORMANCE (100 PSI spring option) Cavity Form Tool (Finishing) 40500002
(100 PSI spring option)
al Test Data (Cartridge Only)Pressure at port 1 (BAR) Seal Kit
Priority port 1 loaded, bypass port 3 unloaded
21191214
Pressure at Port
Bypass port 3 loaded, 3 (BAR)
priority port 1 unloaded
0 50 (100 PSI100
spring option)
150 200 0 50 100
(100 PSI 150
spring option) 200
8 Pressure at port 1 (BAR) 30 8 Pressure at Port 3 (BAR) 30
Regulated Flow (GPM)

Regulated Flow (LPM)

Regulated Flow (GPM)

Regulated Flow (LPM)

0 50 100 150 200 25 0 50 100 150 20025

68 30 68 30
Regulated Flow (GPM)

Regulated Flow (LPM)

Regulated Flow (GPM)

Regulated Flow (LPM)

20 20
Priority port 1 loaded, bypass port 3 unloaded 25 Bypass port 3 loaded, priority port 1 unloaded 25
46 (100 PSI spring option) 15 4 6 (100 PSI spring option) 15
20 20
Pressure at port 1 (BAR) 10 Pressure at Port 3 (BAR) 10
0 2450 100 150 200 15 0 2 450 100 150 200 15
5 8 5
8 30 10 30
10
Regulated Flow (GPM)

Regulated Flow (LPM)

02 0 02 0
25 25
6 0 500 1000 1500 2000 2500 3000 5 6 0 500 1000 1500 2000 2500 3000 5
0 Pressure at port 1 (PSI) 20 0 Pressure at Port 3 (PSI) 20
0 0
4 0 500 1000 Port
1500
2 to 1 2000 2500
15 3000 4 0 500 1000Port1500
2 to 1 2000 2500
15 3000
Pressure at port 1 (PSI) Pressure at Port 3 (PSI)
10 10
2 Port 2 to 1 2 Port 2 to 1
5 5
0 0 0 as a general guide for the product described (herein). Any specific application should0not be undertaken
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only
W 6 / 2020

0 500 independent
WARNING:
without 1000specifications/application
The study, 1500 2000
evaluation, and 2500
testing for suitability. 3000 in our catalogs and0 data sheets
data shown 500 are1000 intended1500 only as 2000a general2500 guide for the product described
3000
(herein). Any Pressure
specific application
at port 1 (PSI)should not be undertaken without independent study, evaluation, Pressureand testing
at Port for suitability.
3 (PSI)
WARNING: The Phone: (815) 397-6628 data shown in our Fax:
specifications/application catalogs(815)
and 397-2526
data sheets are intended E-mail: [email protected]
Port 2 to 1 Port 2only
to 1as a general guide for the product described
(herein). Any
4484 Boeing specific
Drive Rockford,application should
IL 61109 • USA • Phonenot be undertaken
+1 (815) 397-6628 • Faxwithout independent
+1 (815) 397-2526 study, evaluation,
Via Malavolti, and testing
36 • 41122 Modena for suitability.
• ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
Phone: (815) 397-6628
mail: [email protected] • www.delta-power.com Fax: (815) mail:
397-2526
[email protected] E-mail: [email protected]
• www.tecnord.com

Page MF66

NING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION
ORDERING INFORMATION
DG-PDD - - -
DG-PDS – – –
OPTIONS BODIES
Buna Standard 00 Blank Without Body
V0
Viton Standard OPTIONS N 3/4 NPTF Ports BODIES
Buna Standard, Screen A0 S #12 SAE Ports
Buna Standard 00 Blank Without Body
Viton Standard, Screen W0
Viton Standard V0 N 3/4 NPTF Ports
PRESSURE SETTING
Buna Standard, Screen A0 S #12 SAE Ports
Screen located at CF (1) port 0100 100 PSI
Viton Standard, Screen W0
0150 150 PSI
PRESSURE SETTING
0250 250 PSI
0100 120 PSI
Screen located at CF (1) port 0150 300 PSI
0250 250 PSI

without independent study, evaluation, and testing for suitability.

Page MF67
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
FLOW CONTROLS Delta Power Company
MECHANICAL FLOW CONTROLS
4484 Boeing Drive - Rockford, IL 61109
FLOW CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
SO-PDD STEERING PRIORITY FLOW CONTROL VALVE WITH DYNAMIC LOAD SENSE
SO-PDS Steering Priority Flow Control Valve with Dynamic Load Sense
DESCRIPTION
DESCRIPTION
SO-PDS Steering Priority Flow Control Valve with Dynamic Load Sense
16size,
16 size, 1 5/16-12
1 5/16-12 thread,
thread, “Super”
“Super” series,
series, steering
steering priority
priority flow control
flow control valve valve with dynamic
with dynamic load sense.
load sense.
DESCRIPTION
16OPERATION
size, 1 5/16-12 thread, “Super” series, steering priority flow control valve with dynamic load sense.
OPERATION
TheSO-PDD
The SO-PDS allows
allows priority
priority flow flow
from from
(3) to (3) to (4) regardless
(4) regardless of load pressure
of load pressure at either
at either port port(4).
(2) or port (2) or port (4).
OPERATION
Excess flow bypasses out (2).
Excess flow bypasses out (2). Port (1) is the load sense port.
The SO-PDS allows priority flow from (3) to (4) regardless of load pressure at either port (2) or port (4).
Port (1)
Excess is bypasses
flow the load sense port.
out (2).
FEATURES
Port
• (1) is the load
Hardened cagesense port.for long life.
and spool
FEATURES
• Industry common cavity.
• Hardened cage and spool for long life.
FEATURES
• Industry common cavity.
• Hardened cage and spool for long life.
• Industry common cavity.
HYDRAULIC SYMBOL VALVE SPECIFICATIONS
Max Regulated Flow 20 GPM (76 LPM)
HYDRAULIC SYMBOL VALVE SPECIFICATIONS
Rated Operating Pressure 3000 PSI (207 bar)
Max Regulated
Viscosity RangeFlow 2036GPM (76 LPM)
to 3000 SSU (3 to 647 cSt)
Rated Operating
Filtration Pressure 3000 PSI (207 bar)
ISO 18/16/13
Viscosity Range
Media Operating 36 to 3000 SSU (3 to 647 cSt)
-40° to 250° F (-40° to 120° C)
HYDRAULIC SYMBOL Temperature
Filtration
VALVE Range
SPECIFICATIONS ISO 18/16/13
Weight
Media Operating x.xx lbs. (.xx kg)
Max Regulated Flow -40°20toGPM
250°(76F (-40°
LPM) to 120° C)
Temperature
Operating Fluid Range
Media General Purpose Hydraulic Fluid
(1) (4) (2) Rated Operating Pressure 3000 PSI (207 bar)
Weight
Cartridge Torque x.xx lbs. (.xx kg)
Viscosity Range 9036ft-lbs (122SSU
to 3000 Nm) (3 to 647 cSt)
Requirements
Operating Fluid Media General Purpose Hydraulic Fluid
Filtration ISO 18/16/13
Cavity Torque
Cartridge SUPER 5WS
Media Operating Temp. Range 90 ft-lbs
-40° to(122 Nm)
250°F (-40° to 120°C)
PERFORMANCE Requirements
Cavity Form Tool (Finishing) 40500020
Weight
Cavity SUPER1.05 lbs
5WS (.48 kg)
Actual Test Data (Cartridge Only) Seal Kit 21191410
(3) Operating FluidTool
Media(Finishing)
General Purpose Hydraulic Fluid
PERFORMANCE Cavity Form 40500020
Actual Test Data (Cartridge Only) Cartridge
Seal Kit Torque Requirements 90 ft-lbs (122 Nm)
21191410
Cavity SUPER 5WS
PERFORMANCE Cavity Form Tool (Finishing) 40500020
Actual Test Data (Cartridge Only) Seal Kit 21191410
Bypass port 2 loaded, priority port 4 unloaded Priority port 4 loaded, bypass port 2 unloaded
Pressure at Port 2 (BAR) Pressure at Port 4 (BAR)
Bypass
0 port50
2 loaded, priority
100 port 4150
unloaded 200 0Priority port
504 loaded, 100
bypass port150
2 unloaded 200
20 75 20 75
Pressure at Port 2 (BAR) Pressure at Port 4 (BAR)
Regulated Flow (GPM)

Regulated Flow (LPM)

Regulated Flow (GPM)

0 50 100 150 200

Regulated Flow (GPM)

0 50 100 150 200
20 15 60 60
75 2015 75
Regulated Flow (GPM)

Regulated Flow (LPM)

Regulated Flow (GPM)

Page MF68
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 3.76 lbs (1.62 kg)

ORDERING INFORMATION

SO-PDD – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4 NPTF Ports
S #12 SAE Ports

PRESSURE SETTING
0120 120 PSI
0300 300 PSI

without independent study, evaluation, and testing for suitability.

Page MF69
MECHANICAL FLOW CONTROLS

without independent study, evaluation, and testing for suitability.

Page MF70
MECHANICAL FLOW CONTROLS

VELOCITY FUSES

GPM PSI LPM BAR CAVITY MODEL PAGE

6 3500 23 241 7/8-14 IM-CVF MF72

10 3500 38 241 7/8-14 DE-CVF MF74

TYPICAL SCHEMATIC

Typical application for the CVF is to prevent cylinder free fall in the event of a hose or plumbing failure. The valve is usually mounted directly in the
bottom of the cylinder, and sized 1-2 GPM higher than the normal lowering speed. The valve will not re-open until pressure is bled off of port #1.

(1)

CVF

(2)

without independent study, evaluation, and testing for suitability.

Page MF71
MECHANICAL FLOW CONTROLS

IM-CVF INLINE VELOCITY FUSE

DESCRIPTION
3/8 NPTF thread, inline velocity fuse.

OPERATION
The IM-CVF allows flow to pass between (1) and (2). When oil velocity from (1) to (2) exceeds the flow setting,
the valve shifts and blocks flow from (1) to (2).

HYDRAULIC SYMBOL VALVE SPECIFICATIONS - IM-CVF 11

Nominal Flow Max 6 GPM (23 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Typical Internal Leakage
(150 SSU) 0-5 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .18 lbs (.08 kg)
PERFORMANCE Operating Fluid Media General Purpose Hydraulic Fluid

Actual Test Data (Cartridge Only)

VALVE SPECIFICATIONS - IM-CVF 13

Nominal Flow Max 6 GPM (23 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Typical Internal Leakage
(150 SSU) 0-5 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .16 lbs (.07 kg)
Operating Fluid Media General Purpose Hydraulic Fluid

without independent study, evaluation, and testing for suitability.

Page MF72
MECHANICAL FLOW CONTROLS

DIMENSIONS

IM-CVF 11

IM-CVF 13

ORDERING INFORMATION

DE-CVF – – –

FLOW SETTINGS
11 01.0 1 PSI
13 02.0 2 PSI
03.0 3 PSI
04.0 4 PSI
05.0 5 PSI
06.0 6 PSI

without independent study, evaluation, and testing for suitability.

Page MF73
MECHANICAL FLOW CONTROLS

DE-CVF VELOCITY FUSE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, velocity fuse valve.

OPERATION
The DE-CVF allows flow to pass from (1) to (2). When velocity exceeds the flow setting the valve shifts and blocks
flow from (1) to (2). Valve acts like a fixed orifice when passing flow from (2) to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Curves identify pressure drop in port (2) to (1)

direction (non-fuse). Fuse pressure drop is similar at
fuse flow, until fuse takes effect (~75-100 PSID).

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 10 GPM (38 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration Flow (LPM) ISO 18/16/13
Flow (LPM) 0 Media
5 10Operating
15 20 25Temp.
30 Range
35 40 45 50 55-40°
60 to 250°F (-40° to 120°C)
300
0 5 10 15 20 Weight .25 lbs
20(.11 kg)
300 20 250 Operating Fluid Media General Purpose Hydraulic Fluid
Pressure Drop (PSI)

250
Pressure Drop (bar)

Pressure Drop (PSI)

Pressure Drop (bar)

Cartridge Torque Requirements 15 (40.6 Nm)
30 ft-lbs
15 200
200
Cavity DELTA 2W
150 150
PERFORMANCE 10
Cavity Form Tool (Finishing) 40500000
10
100 100
Actual 5 Seal Kit 21191200
50 Test Data (Cartridge Only) 5
50
0 0
0 2 4 6 0 0
Flow (G PM)
0 2 4 6 8 10 Flow
12 (LPM)
14 16
1 gpm 2 gpm Flow (GPM)
Flow (LPM) 0 5 10 15 20 25 30 35 40 45 50 55 60
3, 4 gpm 5, 6, 7 gpm 8, 9, 10 gpm
300
0 5 10 15 20 20
300 20 250
Pressure Drop (PSI)

250
Pressure Drop (bar)

Pressure Drop (PSI)

15 Pressure Drop (bar)

15 200
200
150 10 150 10
100 100
5
50 5
50
0 0
0 2 4 6 0 0
Flow (G PM)
0 2 4 6 8 10 12 14 16
1 gpm 2 gpm Flow (GPM)
3, 4 gpm 5, 6, 7 gpm 8, 9, 10 gpm

without independent study, evaluation, and testing for suitability.

Page MF74
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-CVF – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
S #8 SAE Ports

FLOW SETTING
01.0 1 GPM
02.0 2 GPM
03.0 3 GPM
04.0 4 GPM
05.0 5 GPM
06.0 6 GPM
07.0 7 GPM
08.0 8 GPM
09.0 9 GPM
10.0 10 GPM
± 15%

without independent study, evaluation, and testing for suitability.

Page MF75
MECHANICAL FLOW CONTROLS

without independent study, evaluation, and testing for suitability.

Page MF76
MECHANICAL FLOW CONTROLS

FLOW DIVIDER/COMBINER VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

12 3500 45 241 7/8-14 DG-FDA MF78

40 3500 151 241 1 5/16-12 SN-FDA MF80

12 3500 45 241 7/8-14 DG-FDB MF82

12 3500 45 241 7/8-14 DG-FDH MF84

12 3500 45 241 7/8-14 DG-FDT MF86

TYPICAL SCHEMATIC

Typical application for the FDA and FDH is to synchronize two independent cylinders or hydraulic motors in both directions. The FDB is a flow
divider only. It cannot be used in combine mode.

Typical application for the FDT is to provide positive traction for vehicle drive systems. If one leg loses load, the valve insures flow to the other leg.

(1) (3)
(1)( 3) (1) (3)

(2) (2)
(2)

without independent study, evaluation, and testing for suitability.

Page MF77
MECHANICAL FLOW CONTROLS

DG-FDA FLOW DIVIDER / COMBINER VALVE, SPOOL TYPE

DESCRIPTION
10 size, 7/8-14 thread “Delta Series”, spool type, flow divider/combiner.

OPERATION
In the dividing mode, the DG-FDA will divert input flow from port (2) to ports (3) and (1), based on the ratio
specified, regardless of operating pressure. The DG-FDA will combine input flows from ports (3) and (1), to port
(2) by the same ratio. Should circuit operation result in a blockage of either (3) or (1), the opposite port may also
close under certain conditions. Should this potential exist, consult the factory.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

DO NOT EXCEED MAXIMUM FLOW PER MODEL

For higher accuracy flow ratio, use DG-FDH.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Maximum Flow 12 GPM (45 LPM)
Accuracy on Flow Splits ±10% of Max Rated Inlet Flow
Maximum Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .21 lbs (.10 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
PERFORMANCE Cavity DELTA 4W
Actual Test Data (Cartridge Only) Cavity Form Tool (Finishing) 40500002
Seal Kit 21191214

Flow (LPM) Flow (LPM)

0 10 20 30 40
0 5 10 15 20
400
600 40
20
500 35
300
Pressure Drop (PSI)

Pressure Drop (PSI)

Pressure Drop (bar)

400
30 Pressure Drop (bar)
15
25
300 200
20
10
200 15
10 100
100 5
5
0 0 0 0
0 2 4 6 0 2 4 6 8 10 12
Flow (GPM) Flow (GPM)

3 6 9 12

without independent study, evaluation, and testing for suitability.

Page MF78
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-FDA – – – –
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4 NPT Ports
S #6 SAE Ports
Note: must use 4-way body

SPLITS INLET FLOW

#1 #3 03 2-3 GPM (50 only)
14-86 14 06 3-6 GPM (50 only)
20-80 20 09 6-9 GPM (50 only)
28-72 28 12 9-12 GPM (50 only)
30-70 30 ** All non 50-50 split valves (see chart below for flow ratings)
36-64 36
40-60 40
50-50 50 Maximum inlet flow for non 50-50 split valves
60-40 60 Model code Maximum inlet flow
64-36 64 04 30-70, 70-30 4.0 GPM
70-30 70 06 20-80, 80-20 6.0 GPM
72-28 72 07 14-86, 36-64, 64-36, 86-14 7.0 GPM
80-20 80 09 28-72, 72-28 9.0 GPM
86-14 86 10 40-60, 60-40 10.0 GPM

Consult factory for additional splits

without independent study, evaluation, and testing for suitability.

Page MF79
MECHANICAL FLOW CONTROLS

SN-FDA FLOW DIVIDER / COMBINER VALVE, SPOOL TYPE

DESCRIPTION
16 size, 1 5/16-12 thread “Super Series,” spool-type flow divider/combiner valve.

OPERATION
In the dividing mode, the SN-FDA will divert input flow from port (2) to ports (3) and (1), based on the ratio
specified, regardless of operating pressure. The SN-FDA will combine input flows from ports (3) and (1), to port
(2) by same ratio. Should circuit operation result in a blockage of either (3) or (1), the opposite port may also close
under certain conditions. Should this potential exist, consult the factory.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

DO NOT EXCEED MAXIMUM FLOW PER

MODEL.

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 40 GPM (151 LPM)
Accuracy on Flow Splits ±10% of Max Rated Inlet Flow
Flow (LPM) Maximum Operating Pressure 3500 PSI (241 bar)
0 25 50 75 100 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
300 20 Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

15 Weight .95 lbs (.43 kg)

200
Operating Fluid Media General Purpose Hydraulic Fluid
10 Cartridge Torque Requirements 90 ft-lbs (122 Nm)
100 Cavity SUPER 4W
5 Cavity Form Tool (Finishing) 40500019
Seal Kit 21191413
0 0
0 5 10 15 20 25 30
Flow (GPM)

15 25 30

without independent study, evaluation, and testing for suitability.

Page MF80
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 3.21 lbs (1.46 kg)

ORDERING INFORMATION

SN-FDA – – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports
Note: must use 4-way body
SPLITS
#1 #3
25-75 25 INLET FLOW
35-65 35 15 8-15 GPM
40-60 40 25 15-25 GPM
50-50 50 30 20-30 GPM
60-40 60 40 30-40 GPM *Available as a 50-50 split only
65-35 65 All non 50-50 split valves (see chart below for flow ratings)
75-25 75
Maximum inlet flow for non 50-50 split valves
Consult factory for additional splits Model code Maximum inlet flow
15 35-65, 65-35 15.0 GPM
25 25-75, 40-60, 60-40, 75-25 25.0 GPM
30 35-65, 65-35 30.0 GPM
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W6 / 2020

without independent study, evaluation, and testing for suitability.

Page MF81
MECHANICAL FLOW CONTROLS

DG-FDB FLOW DIVIDER VALVE, SPOOL TYPE

DESCRIPTION
10 size, 7/8-14 thread “Delta Series”, spool type, flow divider.

OPERATION
The DG-FDB will divert input flow from port (2) to ports (3) and (1), based on the ratio specified, regardless of
operating pressure. Should circuit operation result in a blockage of either (3) or (1), the opposite port may also
close under certain conditions. Should this potential exist, consult the factory.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

DO NOT EXCEED MAXIMUM FLOW PER MODEL.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Flow (LPM)
Flow (LPM) 0 10 20 (LPM)
Flow 30 40
0 5 10 Flow (LPM)15 20 400 0 10 20 30 40
600 0 5 10 15 20 400
40
20
500 600 3540
Pressure Drop (PSI)

(PSI)

300
Pressure Drop (bar)

Pressure Drop (bar)

3035
Pressure Drop (PSI)

500
(PSI)

300
Pressure Drop (bar)

400 Pressure Drop (bar)

15
2530
Drop

400 15
300 2025
Drop

200
300 1520 200
Pressure

200 10
Pressure

200 1015 10
100
100 5 10 100
5
100
0 05 5
0 0
0 2 4 6
0 2 4 6 0 0
Flow (GPM) 0 0
Flow (GPM) 0 2 4 6 8 10 12
0 2 4 6 8 10 12
3 6 Flow (GPM)
3 6 Flow (GPM)

99 12
12

without independent study, evaluation, and testing for suitability.

Page MF82
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-FDB – – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPT Ports
S #6 SAE Ports
Note: must use 4-way body

SPLITS INLET FLOW

50-50 50 03 2-3 GPM
Consult factory for splits 06 3-6 GPM
other then 50-50 09 6-9 GPM
12 9-12 GPM

without independent study, evaluation, and testing for suitability.

Page MF83
MECHANICAL FLOW CONTROLS

DG-FDH FLOW DIVIDER / COMBINER VALVE, SPOOL TYPE

DESCRIPTION
“High Accuracy” 10 size, 7/8-14 thread “Delta Series”, spool type, flow divider/combiner.

OPERATION
In the dividing mode, the DG-FDH will divert input flow from port (2) to ports (3) and (1), based on the ratio
specified with a high degree of accuracy, regardless of operating pressure. The DG-FDH will combine input flows
from ports (3) and (1), to port (2) by the same ratio. Should circuit operation result in a blockage of either (3) or
(1), the opposite port may also close under certain conditions. Should this potential exist, consult the factory.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

DO NOT EXCEED MAXIMUM FLOW PER MODEL.

The DG-FDH should be considered if the DG-FDA
does not provide the required accuracy.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Maximum Flow 12 GPM (45 LPM)
Accuracy on Flow Splits ±4% of Max Rated Inlet Flow
Maximum Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .21 lbs (.10 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
PERFORMANCE Cavity DELTA 4W
Actual Test Data (Cartridge Only) Cavity Form Tool (Finishing) 40500002
Seal Kit 21191214

Flow (LPM)
0 10 20 (LPM)
Flow 30 40
Flow (LPM) 400 0 10 20 30 40
0 5 10 Flow (LPM)15 20 400
600 0 5 10 15 20 40 20
600 300 20
Pressure Drop (PSI)

Pressure Drop (PSI)

500 3540
Pressure Drop (bar)

Pressure Drop (bar)

300
Pressure Drop (PSI)

Pressure Drop (PSI)

500 3035 15
Pressure Drop (bar)

400 Pressure Drop (bar)

2530 15
400 200
300 2025 200
300 10
200 1520 10
200 1015 100
100 5
100 5 10 100
5
0 05
0 0
0 2 4 6 0 0
0 2Flow (GPM) 4 6 0 0
Flow (GPM) 0 2 4 6 8 10 12
0 2 4 6 8 10 12
3 6 Flow (GPM)
3 6 Flow (GPM)
9
9 12
12

without independent study, evaluation, and testing for suitability.

Page MF84
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-FDH – – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPT Ports
S #6 SAE Ports
Note: must use 4-way body

SPLITS INLET FLOW

50-50 50 03 2-3 GPM
Consult factory for splits 06 3-6 GPM
other then 50-50 09 6-9 GPM
12 9-12 GPM

without independent study, evaluation, and testing for suitability.

Page MF85
MECHANICAL FLOW CONTROLS

DG-FDT FLOW DIVIDER / COMBINER VALVE, SPOOL TYPE

DESCRIPTION
10 size, 7/8-14 thread “Delta Series”, spool type, flow divider/combiner, positive traction valve.

OPERATION
In the dividing mode, the DG-FDT will divert input flow from port (2) to ports (3) and (1), based on the ratio
specified, regardless of operating pressure. The DG-FDT will combine input flows from ports (3) and (1). Should
circuit operation result in a blockage of either (3) or (1), the opposite port may also close under certain conditions.
Should this potential exist, consult the factory.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

TRACTION FLOW W/1 LEG UNLOADED

DO NOT EXCEED MAXIMUM
2-3 GPM valve - 0.4 GPM
FLOW PER MODEL
3-6 GPM valve - 0.7 GPM
Use where wheel slip (or “drag”)
6-9 GPM valve - 1.1 GPM
needs to be accomplished.
9-12 GPM valve - 1.5 GPM

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Maximum Flow 12 GPM (45 LPM)
Accuracy on Flow Splits ±10% of Max Rated Inlet Flow
Maximum Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .22 lbs (.10 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
PERFORMANCE Cavity DELTA 4W
Actual Test Data (Cartridge Only) Cavity Form Tool (Finishing) Flow (LPM) 40500002
Flow (LPM) Seal Kit
0 10 20 21191214
30 40
0 5 10 15 20 400
600 40 Flow (LPM) 20
35
Pressure Drop (PSI)

500 300
Pressure Drop (PSI)

Flow (LPM) 0 10 20 30 40
Pressure Drop (bar)

Pressure Drop (bar)

30
400 0 5 10 15 20 400 15
25
300 600 20 40 200
20
15 35 10
Pressure Drop (PSI)

200 500 300

Pressure Drop (PSI)
Pressure Drop (bar)

10 30 Pressure Drop (bar)

100 400 100 15
5 25 5
0 300 0 20 200
0
200 2 4 6 15 10
0 0
Flow (GPM) 10
100 0
100 2 4 6 8 10 12
5
5
0 3 6 0 Flow (GPM)
0 2 4 6 9 12
0 0
Flow (GPM)
0 2 4 6 8 10 12
3 6 Flow (GPM)

9 12

without independent study, evaluation, and testing for suitability.

Page MF86
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-FDT – – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPT Ports
S #6 SAE Ports
Note: must use 4-way body

SPLITS INLET FLOW

50-50 50 03 2-3 GPM
Consult factory for splits 06 3-6 GPM
other then 50-50 09 6-9 GPM
12 9-12 GPM

without independent study, evaluation, and testing for suitability.

Page MF87
MECHANICAL FLOW CONTROLS

without independent study, evaluation, and testing for suitability.

Page MF88
MECHANICAL FLOW CONTROLS

LOGIC ELEMENTS

GPM PSI LPM BAR CAVITY MODEL PAGE

40 3500 151 241 1 5/16-12 SL-PLA MF90

40 3500 151 241 1 5/16-12 SL-PLB MF92

40 3500 151 241 1 5/16-12 SL-PLC MF94

TYPICAL SCHEMATIC

Typical application for the PLA, PLB, and PLC is to provide the main stage of a high-flow capacity on/off function. A low flow solenoid valve is
generally used to provide pilot control.
The PLA and PLB are intended for flow in one direction only, whereas the PLC can be used for bi-directional operation.
The differing pilot ratios between the three valves affect pressure drop versus flow, and opening pressure versus pilot pressure.
The differing pilot ratios between the three valves affect pressure drop versus flow, and opening pressure as a function of pilot pressure.

A B

(3) (3)
(1) (1)
(2) (2)

(1) (1)

(2) (2)

(3) (3)

(1)

(2)

SL-PLC-0P-0050 (3)

P T 40 GPM
OPEN CENTER 4W3P
LOGIC CONTROL CITCUIT

without independent study, evaluation, and testing for suitability.

Page MF89
MECHANICAL FLOW CONTROLS

SL-PLA SUPER SERIES, LOGIC VALVE

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, logic valve.

OPERATION
The SL-PLA with an orifice between ports (3) and (1) maintains a constant flow rate from (3) regardless of load
pressure changes in the system upstream of (3), or in the bypass leg at (2) as long as pressure at (2) is less than
(1). Used for basic blocking applications.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

For bidirectional applications see SL-PLC.

For metering see SLPCA or SL-PCB.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 40 GPM (151 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .69 lbs (.31 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Cavity SUPER 3WS
PERFORMANCE Flow (LPM) Flow
Cavity Form Tool (LPM)
(Finishing) 40500021
0 5 2 0 5 75 100 125 150 0 25 50 75 100 125 150
Actual Seal Kit 21191409
125 Test Data (Cartridge Only) 200
Seat Ratio Area of the pilot is 1.2 times
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (PSI)

100
Pressure @ Port 3 (bar)

Pressure @ Port 3 (bar)

150 the10
area of the seat at Port (3)
75 5
100
50 Flow (LPM) Flow (LPM) 5
0 5 2 0 5 75 100 125 150 50 0 25 50 75 100 125 150
25 200
125
0 0 0 0
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (PSI)

100
Pressure @ Port 3 (bar)

Pressure @ Port 3 (bar)

0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
150 10
Flow (GPM) Flow (GPM)
75Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity) 5 Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity)
100
50 5
50
25

0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
Flow (GPM) Flow (GPM)

Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity) Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity)

without independent study, evaluation, and testing for suitability.

Page MF90
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 1.89 lbs (.86 kg)

ORDERING INFORMATION

SL-PLA – – –

OPTIONS BODIES
Buna, Pilot to Close 0P Blank Without Body
Viton, Pilot to Close VP S #12 SAE Ports
Buna, Vent to Open 0V
Viton, Vent to Open VV
Buna, Pilot to Close w/seals 0B
Viton, Pilot to Close w/seals VB
Buna, Vent to Open w/seals 0C PRESSURE SETTING
Viton, Vent to Open w/seals VC 0020 20 PSI
0050 50 PSI
0100 100 PSI
0150 150 PSI

without independent study, evaluation, and testing for suitability.

Page MF91
MECHANICAL FLOW CONTROLS

SL-PLB SUPER SERIES, LOGIC VALVE

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, logic valve.

OPERATION
The SL-PLB with an orifice between ports (3) and (1) maintains a constant flow rate from (3) regardless of load
pressure changes in the system upstream of (3), or in the bypass leg at (2) as long as pressure at (2) is less than
(1). Used for basic blocking applications.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

For bidirectional applications see SL-PLC.

For metering see SLPCA or SL-PCB.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 40 GPM (151 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .69 lbs (.31 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Cavity SUPER 3WS
Flow (LPM) Flow (LPM)
PERFORMANCE Cavity Form Tool 75
(Finishing) 40500021
0 25 50 75 100 125 150 0 25 50 100 125 150
Actual
200 Test Data (Cartridge Only) 250 Seal Kit 21191409
Seat Ratio Area
15 of the pilot is 1.5 times
Pressure @ Port 3 (PSI)
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (bar)

200
150 10
the area of the seat at Port (3)
150 10
100
Flow (LPM) 5 100 Flow (LPM)
50 5
0 25 50 75 100 125 150 50 0 25 50 75 100 125 150
200 250
0 0 0 0
15
Pressure @ Port 3 (PSI)
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (bar)

0 5 10 20 15 25 30 35 40
Pressure @ Port 3 (bar)

0 5 20 25 10
200 30 15 35 40
150 Flow (GPM) Flow (GPM)
10
Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity) Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity)
150 10
100
5 100
50 5
50

0 0 0 0
0 5 10 20 15
25 30 35 40 0 5 10 15
20 25 30 35 40
Flow (GPM) Flow (GPM)
Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity) Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity)

without independent study, evaluation, and testing for suitability.

Page MF92
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 1.89 lbs (.86 kg)

ORDERING INFORMATION

SL-PLB – – –

without independent study, evaluation, and testing for suitability.

Page MF93
MECHANICAL FLOW CONTROLS

SL-PLC SUPER SERIES, LOGIC VALVE

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, logic valve.

OPERATION
The SL-PLC with an orifice between ports (3) and (1) maintains a constant flow rate from (3) regardless of load
pressure changes in the system upstream of (3), or in the bypass leg at (2) as long as pressure at (2) is less than
(1). Used for basic bidirectional blocking applications.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

For metering see SL-PCA or SL-PCB.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 40 GPM (151 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .65 lbs (.29 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Cavity SUPER 3WS
PERFORMANCE Cavity Form Tool (Finishing) 40500021
Flow (LPM) Flow (LPM)
Actual Test Data Seal Kit 21191409
0 25 (Cartridge
50 Only)
75 100 125 150 0 25 50 75 100 125 150
300 100 Seat Ratio Area of the pilot is 2 times
20
250 the area of the seat at Port (3)
Inlet Pressure (PSI)

Inlet Pressure (PSI)

75
Inlet Pressure (bar)

Inlet Pressure (bar)

15 5
200

150 10 50

100 Flow (LPM) Flow (LPM)

5 25
50 0 25 50 75 100 125 150 0 25 50 75 100 125 150
300 20 0 100
0 0 0
0
250 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
Flow (GPM) Flow (GPM)
Inlet Pressure (PSI)

Inlet Pressure (PSI)

75
Inlet Pressure (bar)

Inlet Pressure (bar)

Port 3 to 2 (Standard Cavity) Port 2 to 3 (Standard Cavity) 15 Port 3 to 2 (Undercut Cavity) Port 2 to 3 (Undercut Cavity)
5
200

150 10 50

100
5 25
50

0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
Flow (GPM) Flow (GPM)
Port 3 to 2 (Standard Cavity) Port 2 to 3 (Standard Cavity) Port 3 to 2 (Undercut Cavity) Port 2 to 3 (Undercut Cavity)

without independent study, evaluation, and testing for suitability.

Page MF94
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: 1.89 lbs (.86 kg)

ORDERING INFORMATION

SL-PLC – – –

OPTIONS BODIES
Buna, Pilot to Close 0P Blank Without Body
Viton, Pilot to Close VP S #12 SAE Ports
Buna, Pilot to Close w/seals 0B
Viton, Pilot to Close w/seals VB

PRESSURE SETTING
0020 20 PSI
0050 50 PSI
0100 100 PSI
0150 150 PSI

without independent study, evaluation, and testing for suitability.

Page MF95
MECHANICAL FLOW CONTROLS

without independent study, evaluation, and testing for suitability.

Page MF96
MECHANICAL FLOW CONTROLS

HAND PUMPS

cu in/stroke PSI cc/stroke BAR CAVITY MODEL PAGE

0.35 500 5.8 34 7/8-14 DE-HPA MF98

0.39 3000 6.4 207 7/8-14 DE-HPB MF100

0.39 3000 6.4 207 7/8-14 DE-HPE MF102

0.35 500 5.8 34 7/8-14 DE-HPC MF104

0.39 3000 6.4 207 7/8-14 DE-HPD MF106

0.39 3000 6.4 207 7/8-14 DE-HPF MF108

TYPICAL SCHEMATIC

Typical application for the HPA, HPB, HPC, and HPD is to supply pressure to release parking brake for towing.

without independent study, evaluation, and testing for suitability.

Page MF97
MECHANICAL FLOW CONTROLS

DE-HPA HAND PUMP

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, cartridge type, plunger hand pump.

OPERATION
The DE-HPA hand pump when pulled primes thru Port (1) and when pushed pressurizes outlet port (2).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL This product is not intended as a load holding

device.

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow .35 cu in/stroke

Rated Operating Pressure 500 PSI (34 bar)
Typical Internal Leakage
(150 SSU) 0-10 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .57 lbs (.26 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Cavity DELTA 2W
Cavity Form Tool (Finishing) 40500000
Seal Kit 21191200

without independent study, evaluation, and testing for suitability.

Page MF98
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (21 kg)

ORDERING INFORMATION

DE-HPA – –

OPTIONS BODIES
Buna, Knob 0K Blank Without Body
Viton, Knob VK N 3/8” NPTF Ports
S #8 SAE Ports

without independent study, evaluation, and testing for suitability.

Page MF99
SPECIAL APPLICATION VALVES Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
MECHANICAL FLOW CONTROLS

DE-HPB Hand Pump, Push to Pump type

DE-HPB HAND PUMP, PUSH TO PUMP TYPE
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, screw in, cartridge type, hand pump.
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, screw in, cartridge type, hand pump.
OPERATION
The DE-HPB hand pump when pipe handle is lifted, primes thru port (1) and when pushed provides flow
OPERATION
pressure
The DE-HPBtohandoutlet port
pump (2).pipe handle is lifted, primes thru port (1) and when pushed provides flow pressure
when
to outlet port (2).

FEATURES
• Large displacement per stroke.
• Industry common cavity.
FEATURES
 Large displacement per stroke.
 Industry common cavity.

HYDRAULIC SYMBOL
HYDRAULIC SYMBOL This product is not intended as a load holding
device. Linkage is not to be removed.
36” Maximum handle length.

This product is not intended as a load holding device.

Linkage is not to be removed.
24” Maximum handle length.
PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow .39 cu in/stroke

Rated Operating Pressure 3000 PSI (207 bar)
Force (kg) Typical Internal Leakage
0 10 20 30 40 50 60 (150 SSU) 0-10 drops/min
PERFORMANCE
2000
VALVE SPECIFICATIONS
Viscosity Range Flow
Nominal 36 to 3000 SSU
.39 cu(3in/stroke
to 647 cSt)
120
Pump Effective Area .44 in 2 Filtration
Rated Operating PressureISO 18/16/13
2000 PSI (138 bar)
1500
Pressure (BAR)

100
Pressure (PSI)

Force (kg) Media Typical

OperatingInternal
Temp. Range
Leakage-40° to 250°F (-40° to 120°C)
80 Weight(150
0 –kg)10 drops/min
1.5 lbs (.69
1000 0 10 20 30 40 50 60 SSU)
2000 60 Operating Fluid Media
Viscosity
Range General Purpose Hydraulic
36 to 3000 SSU Fluid
(3 to 647 cSt)
40 Cartridge Torque Requirements
Filtration 30 ft-lbs (40.6
ISO Nm)18/16/13
500 120
20 Cavity Media
Operating DELTA 2W
1500
Pressure (BAR)

40500000-40 to 250 F (-40 to 120 C)

100
Pressure (PSI)

Cavity Temperature Range

Form Tool (Finishing)
0 0
80 Weight
Seal Kit 211912001.5 lbs. (.69 kg)
1000 0 20 40 60 80 100 120 140
Force (LBS) 60 Operating Fluid Media General Purpose Hydraulic Fluid
With 12 inch long pipe handle 40 Cartridge Torque
500 30 ft-lbs (40.6 Nm)
Requirements
20
Cavity DELTA 2W
0 0 Cavity Form Tool (Finishing) 40500000
0 20 40 60 80 100 120 140 Seal Kit 21191200
Force (LBS)
With 12 inch long pipe handle
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 6 / 2020

without independent study, evaluation, and testing for suitability.

4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
WARNING: The specifications/application data shown in our catalogs and
mail: [email protected] • www.delta-power.com
data sheets are intended only as a general guide for the product described
mail: [email protected] • www.tecnord.com
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Page MF100 Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (21 kg)

ORDERING INFORMATION

DE-HPB – –

OPTIONS BODIES
Buna, Linkage 0L Blank Without Body
Viton, Linkage VL N 3/8” NPTF Ports
S #8 SAE Ports

without independent study, evaluation, and testing for suitability.

Page MF101
Delta Power C
4484 Boeing Drive - Roc

MECHANICAL FLOW CONTROLS

DE-HPE Hand Pump , Pull to Pump type
DE-HPE HAND PUMP, PULL TO PUMP TYPE
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, screw in, cartridge type, hand pump.
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, screw in, cartridge type, hand pump.
OPERATION
The DE-HPE hand pump when pipe handle is pushed, primes thru port (1) and when lifte
OPERATION
pressure tohand
The DE-HPE outlet port
pump (2).pipe handle is pushed, primes thru port (1) and when lifted provides flow
when
pressure to outlet port (2).

FEATURES
• Large displacement per stroke.
• Industry common cavity.
FEATURES
 Large displacement per stroke.
 Industry common cavity.

HYDRAULIC SYMBOL This product is not intended as a load holding

device. Linkage is not to be removed.
HYDRAULIC SYMBOL 36” Maximum handle length.

This product is not intended as a load holding device

Linkage is not to be removed.
24” Maximum handle length.
PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow .39 cu in/stroke

Rated Operating Pressure 3000 PSI (207 bar)
2
Pump Effective Area .44 in Typical Internal Leakage
Force (kg) (150 SSU) 0-10 drops/min
0 10 20 30 40 50 60 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
2000 Filtration ISO 18/16/13
120 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
1500
Pressure (BAR)

100
Pressure (PSI)

Weight 1.5 lbs (.69 kg)

PERFORMANCE 80 VALVE
Operating Fluid Media SPECIFICATIONS
General Purpose Hydraulic Fluid
1000
60 Nominal Flow
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm) .39 cu in/stroke
Pump Effective Area .44 in 2 40 Cavity Rated Operating DELTA Pressure
2W 2000 PSI (138 bar)
500
Force (kg) 20 Typical Internal
Cavity Form Tool (Finishing) Leakage
40500000
0 – 10 drops/min
0 0 10 20 30 40 50
0 60 Seal Kit (150 SSU) 21191200
20000 20 40 60 80 100 120 140 Viscosity Range 36 to 3000 SSU (3 t
Force (LBS) 120 Filtration ISO 18/16/13
With 12 inch long pipe handle
1500 Media Operating
Pressure (BAR)

100 -40 to 250 F (-40

Pressure (PSI)

Temperature Range
80 Weight 1.5 lbs. (.69 kg)
1000
60 Operating Fluid Media General Purpose H
40 Cartridge Torque
500 30 ft-lbs (40.6 Nm)
WARNING:
Requirements
the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 6 / 2020

without independent study, evaluation, and testing for suitability.

20
Cavity DELTA 2W
0 0 Cavity Form Tool (Finishing) 40500000
0 20 40 60 80 100
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
120 140
Via Malavolti, 36 • 41122Seal
ModenaKit • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 21191200
253512
mail: [email protected] • www.delta-power.com
Force (LBS) mail: [email protected] • www.tecnord.com

With 12 inch long pipe handle

Page MF102
SPECIAL
SPECIAL
APPLICATION
APPLICATION
VALVES
VALVES DeltaDelta
PowerPower
Company
Comp
4484 Boeing
4484Drive
MECHANICAL Boeing
FLOW - Rockford,
Drive - Rockford,
CONTROLS IL 61109IL

DIMENSIONS
DIMENSIONS
DIMENSIONS

Body Weight: .47 lbs (21 kg)

ORDERING INFORMATION

ORDERING
ORDERING
INFORMATION
INFORMATION
DE-HPE – –
DE-HPEDE-HPE
- - - -
OPTIONSOPTIONS OPTIONS BODIES BODIES BODIES
Buna, Linkage 0L Linkage0L
Buna,
Buna, Linkage 0L
Blank Without Blank
WithoutWithout
Blank Body Body Body
Viton, Linkage VL LinkageVLVLN
Viton,
Viton, Linkage N NPTF
3/8NNPTF 3/8
Ports 3/8”Ports
NPTF Ports
S #8 S S SAE#8Ports
SAE Ports
#8 SAE Ports

without independent study, evaluation, and testing for suitability.

WARNING: WARNING:
The specifications/application
The specifications/application
data shown
data
in shown
our catalogs
in our and
catalogs
data sheets
and dataaresheets
intended
are only
intended
as a only
general
as aguide
general
for the
guide
product
for the
Page described
product d
MF103
(herein). Any
(herein).
specific
Anyapplication
specific application
should notshould
be undertaken
not be undertaken
without independent
without independent
study, evaluation,
study, evaluation,
and testing
and
fortesting
suitability.
for suitability.
MECHANICAL FLOW CONTROLS

DE-HPC HAND PUMP

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, cartridge type, plunger hand pump.

OPERATION
The DE-HPC hand pump when pulled primes thru port (2) and when pushed provide flow pressure to outlet port
(1).

FEATURES
• Small profile.
• Industry common cavity.
• Large displacement per stroke.

HYDRAULIC SYMBOL This product is not intended as a load holding

device.

2
Pump Effective Area .24 in
Force (kg)
PERFORMANCE VALVE SPECIFICATIONS
0 0 1 0 2 30 0 4 0 5 60
Actual500
Test Data (Cartridge Only) Nominal Flow .35 cu in/stroke
Pump Effective Area .24 in
2
30 Rated Operating Pressure 500 PSI (34 bar)
375 Force (kg) Typical Internal Leakage
25
Pressure (PSI)

Pressure (bar) Pressure (bar)

0 0 1 0 2 30 0 4 0 5 60 (150 SSU) 0-10 drops/min

20
500
250 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
15
30 Filtration ISO 18/16/13
375 10 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
125 25
Pressure (PSI)

5 Weight .57 lbs (.26 kg)

20
250 0 0 Operating Fluid Media General Purpose Hydraulic Fluid
15
0 20 40 60 80 100 120 140 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Force (LBS) 10 Cavity DELTA 2W
125
5 Cavity Form Tool (Finishing) 40500000
0 0 Seal Kit 21191200
0 20 40 60 80 100 120 140
Force (LBS)

without independent study, evaluation, and testing for suitability.

Page MF104
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (21 kg)

ORDERING INFORMATION

DE-HPC – –

OPTIONS BODIES
Buna, Knob 0K Blank Without Body
Viton, Knob VK N 3/8” NPTF Ports
S #8 SAE Ports

without independent study, evaluation, and testing for suitability.

Page MF105
SPECIAL APPLICATION VALVES Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
MECHANICAL FLOW CONTROLS

DE-HPD Hand Pump, Push to Pump type

DE-HPD HAND PUMP, PUSH TO PUMP TYPE
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, cartridge type, hand pump.
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, cartridge type, hand pump.
OPERATION
The DE-HPD hand pump when pipe handle is lifted, primes thru port (2) and when pushed provides flow
OPERATION
pressure
The DE-HPD tohand
outlet portwhen
pump (1). pipe handle is lifted, primes thru port (2) and when pushed provides flow pressure
to outlet port (1).

FEATURES
• Large displacement per stroke.
• Industry common cavity.
FEATURES
 Large displacement per stroke.
 Industry common cavity.

HYDRAULIC SYMBOL
HYDRAULIC SYMBOL This product is not intended as a load holding
device. Linkage is not to be removed.
36” Maximum handle length.

This product is not intended as a load holding device.

Linkage is not to be removed.
24” Maximum handle length.
PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow .39 cu in/stroke

Rated Operating Pressure 3000 PSI (207 bar)
Force (kg)
PERFORMANCE TypicalVALVE SPECIFICATIONS
Internal Leakage
0 10 20 30 40 50 60
2000 Pump Effective Area .44 in 2
Nominal
(150 SSU) Flow 0-10 drops/min
.39 cu in/stroke
Rated
Viscosity Operating
Range Pressure
36 to 30002000
SSU PSI
(3 to (207 bar)
647 cSt)
Force (kg) 120
Typical
Filtration Internal LeakageISO 18/16/13
1500
0 10 20 30 40 50 60 100 0-10 drops per min
Pressure (BAR)
Pressure (PSI)

Media (150
Operating SSU) Temp. Range -40° to 250°F (-40° to 120°C)
2000 80 WeightViscosity
Range 36kg)
1.5 lbs (.69 to 3000 SSU (3 to 647 cSt)
1000
60120 Filtration
Operating Fluid Media ISO 18/16/13
General Purpose Hydraulic Fluid
1500
Pressure (BAR)

40100 Media
Cartridge TorqueOperating
Requirements 30 ft-lbs (40.6 Nm)
Pressure (PSI)

500 -40 to 250 F (-40 to 120 C)

2080 Cavity Temperature
Range DELTA 2W
1000 Cavity Weight
Form Tool (Finishing) 40500000 1.5 lbs. (.69 kg)
0 0 60
0 20 40 60 80 100 120 140 Seal KitOperating
Fluid Media 21191200General Purpose Hydraulic Fluid
500 40 Cartridge Torque
Force (LBS) 30 ft-lbs (40.6 Nm)
With 12 inch long pipe handle 20 Requirements
0 0
Cavity DELTA 2W
0 20 40 60 80 100 120 140
Cavity Form Tool (Finishing) 40500000
Seal Kit 21191200
Force (LBS)
With 12 inch long pipe handle

without independent study, evaluation, and testing for suitability.

4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
mail: [email protected] • www.delta-power.com mail: [email protected] • www.tecnord.com
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Page MF106 Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
MECHANICAL FLOW CONTROLS

DIMENSIONS

Body Weight: .47 lbs (21 kg)

ORDERING INFORMATION

DE-HPD – –

OPTIONS BODIES
Buna, Linkage 0L Blank Without Body
Viton, Linkage VL N 3/8” NPTF Ports
S #8 SAE Ports

without independent study, evaluation, and testing for suitability.

Page MF107
Delta Power C
4484 Boeing Drive - Rock

MECHANICAL FLOW CONTROLS

DE-HPF Hand Pump, Pull to Pump type
DE-HPF HAND PUMP, PULLDESCRIPTION
TO PUMP TYPE
10 size, 7/8-14 thread, “Delta” series, cartridge type, hand pump.
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, cartridge type, hand pump.
OPERATION
The DE-HPF hand pump when pipe handle is pushed, primes thru port (2) and when lifte
OPERATION
pressure to outlet port (1).
The DE-HPF hand pump when pipe handle is pushed, primes thru port (2) and when lifted provides flow
pressure to outlet port (1).

FEATURES
• Large displacement per stroke.
• Industry common cavity.
FEATURES
 Large displacement per stroke.
 Industry common cavity.

HYDRAULIC SYMBOL This product is not intended as a load holding

HYDRAULIC SYMBOL device. Linkage is not to be removed.
36” Maximum handle length.

This product is not intended as a load holding de

Linkage is not to be removed.

PERFORMANCE 24” Maximum

VALVE SPECIFICATIONS handle length.
Actual Test Data (Cartridge Only) Nominal Flow .39 cu in/stroke
Rated Operating Pressure 3000 PSI (207 bar)
Force (kg)
Typical Internal Leakage
0 10 20 30 40 50 60
2000 (150 SSU) 0-10 drops/min
PERFORMANCE 120 Viscosity Range VALVE SPECIFICATIONS
36 to 3000 SSU (3 to 647 cSt)
1500 Pump Effective Area .44 in 2
Nominal FlowISO 18/16/13
Filtration .39 cu in/stroke
Pressure (BAR)

100
Pressure (PSI)

Rated
Media Operating Temp. Operating
Range Pressure
-40° to 2000 PSI (207 bar)
250°F (-40° to 120°C)
Force (kg) 80
1000 Weight Typical Internal1.5Leakage
lbs (.69 kg)
0 10 20 30 40 50 60 60 0-10
Fluiddrops per min
(150
Operating Fluid Media SSU) General Purpose Hydraulic
2000 40 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
500 Viscosity Range 36 to 3000 SSU (3 to
20 120
Cavity
Filtration DELTA 2W
ISO 18/16/13
1500
0 0 Cavity Form Tool (Finishing) 40500000
Pressure (BAR)

100 Media Operating

Pressure (PSI)

0 20 40 60 80 100 120 140 Seal Kit 21191200 -40 to 250 F (-40

80 Temperature Range
Force (LBS)
1000 With 12 inch long pipe handle Weight 1.5 lbs. (.69 kg)
60
Operating Fluid Media General Purpose Hy
500 40 Cartridge Torque
30 ft-lbs (40.6 Nm)
20 Requirements
0 0
Cavity DELTA 2W
0 20 40 60 80 100 120 140
Cavity Form Tool (Finishing) 40500000
Seal Kit 21191200
Force (LBS)
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 6 / 2020

without independent study, evaluation, and testing for suitability.

With 12 inch long pipe handle

Page MF108
PECIALSPECIAL
APPLICATION
APPLICATION
VALVES VALVES Delta Power
Delta Power
Company
Com
4484 Boeing4484
DriveBoeing
- Rockford,
Drive IL
- Rockford,
61109
MECHANICAL FLOW CONTROLS

IMENSIONSDIMENSIONS
DIMENSIONS

Body Weight: .47 lbs (21 kg)

ORDERING INFORMATION

RDERING
ORDERING
INFORMATION
INFORMATION
DE-HPF – –
DE-HPF DE-HPF
- -- -
OPTIONS OPTIONS OPTIONS BODIES BODIES
BODIES
Buna, LinkageBuna,0L Linkage
Buna, Linkage 0L
Blank
0L Without
Blank
Body Without
Blank BodyBody
Without
Viton, LinkageViton,VL
Linkage
Viton, Linkage N
VL
VL N Ports
3/8 NPTF 3/8
N NPTF Ports Ports
3/8” NPTF
S #8 SAES Ports#8
S SAE#8Ports
SAE Ports

without independent study, evaluation, and testing for suitability.

Page MF109
ARNING: The WARNING:
specifications/application
The specifications/application
data shown indata
our shown
catalogs
in and
our catalogs
data sheets
andare
dataintended
sheets are
onlyintended
as a general
only as
guide
a general
for the guide
product
fordescribed
the product
erein). Any (herein).
specific application
Any specific
should
application
not beshould
undertaken
not bewithout
undertaken
independent
without study,
independent
evaluation,
study,
and
evaluation,
testing forand
suitability.
testing for suitability.
MECHANICAL PRESSURE CONTROLS

MECHANICAL PRESSURE CONTROLS

DIRECT ACTING AND DIFFERENTIAL AREA RELIEF VALVES ........................................................................................... MP3

PILOT OPERATED RELIEF VALVES ................................................................................................................................................ MP31

CROSSOVER RELIEF VALVES ......................................................................................................................................................... MP47

PRESSURE COMPENSATED REGULATOR VALVES ............................................................................................................. MP53

PRESSURE REDUCING/RELIEVING VALVES ............................................................................................................................ MP87

SEQUENCE VALVES .............................................................................................................................................................................. MP95

SHUT DOWN VALVES ........................................................................................................................................................................... MP119

without independent study, evaluation, and testing for suitability.

Page MP1
MECHANICAL PRESSURE CONTROLS

without independent study, evaluation, and testing for suitability.

Page MP2
MECHANICAL PRESSURE CONTROLS

DIRECT ACTING AND DIFFERENTIAL AREA RELIEF VALVES

DIRECT ACTING RELIEF VALVES GPM PSI LPM BAR CAVITY MODEL PAGE

12 3500 45 241 7/8-14 DE-RCA MP4

5 3000 19 207 5/8-18 MA-RVA MP6

6 3500 23 241 3/4-16 PB-RVA MP8

8 4000 30 276 7/8-14 DE-RVA MP10

6 3500 23 241 3/4-16 PB-RWA MP12

8 4000 30 276 7/8-14 DE-RWA MP14

20 4000 76 276 7/8-14 DE-RWF MP16

DIFFERENTIAL AREA RELIEF VALVES GPM PSI LPM BAR CAVITY MODEL PAGE

15 3500 57 241 7/8-14 DE-RCD MP18

8 3500 30 241 3/4-16 PB-RVD MP20

15 4000 57 276 7/8-14 DE-RVD MP22

40 5000 151 345 7/8-14 HE-RVD MP24

8 3500 30 241 3/4-16 PB-RWD MP26

15 4000 57 276 7/8-14 DE-RWD MP28

TYPICAL SCHEMATIC

Typical application for the RVA, RVD, RWA, RWD is to protect pump and system.
Typical application for the RCA and RCD is cross over relief to protect motor in both directions, where lowest possible price is desired.

without independent study, evaluation, and testing for suitability.

Page MP3
MECHANICAL PRESSURE CONTROLS

DE-RCA GUIDED BALL, DIRECT ACTING RELIEF VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, direct acting relief valve.

OPERATION
The DE-RCA blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the poppet to open and
allow metered flow from (2) to (1). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL Installation Space Saving Product. Cannot be field

adjusted. Not recommended for crossover relief
valve applications, use DE-RWA.

Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55 60
4500 300
4000
3500 250
PERFORMANCE VALVE SPECIFICATIONS
Pressure Drop (PSI)

Pressure Drop (bar)

3000 200
Actual
2500 Test Data (Cartridge Only) Nominal Flow 12 GPM (45 LPM)
150
2000 Rated Operating Pressure 3500 PSI (241 bar)
1500 Flow (LPM) 100 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
1000 0 5 10 15 20 25 30 35 40 45 50 55 60
50 Filtration ISO 18/16/13
5004500
300 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
04000 0
0
3500 2 4 6 8 10 12 14 16 250 Weight .38 lbs (.17 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

3000 Flow (GPM) Operating Fluid Media General Purpose Hydraulic Fluid
200
2500 2500 3500 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
150
2000 Cavity DELTA 2W
1500 100 Cavity Form Tool (Finishing) 40500000
1000
50 Seal Kit 21191200
500
0 0
0 2 4 6 8 10 12 14 16
Flow (GPM)

2500 3500

without independent study, evaluation, and testing for suitability.

Page MP4
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RCA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
S #8 SAE Ports

PRESSURE RANGE/SETTING
2500 100 - 2500 PSI
3500 250 - 3500 PSI

without independent study, evaluation, and testing for suitability.

Page MP5
MECHANICAL PRESSURE CONTROLS

MA-RVA DIRECT ACTING RELIEF VALVE

DESCRIPTION
7 size, 5/8-18 thread, “Mini” series, direct acting relief valve.

OPERATION
The MA-RVA blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the poppet to open and
allow metered flow from (2) to (1). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 5 GPM (19 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Flow (LPM)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 5 10 15 20 25 30 Filtration ISO 18/16/13
4000 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
3500 250 Weight .39 lbs (.17 kg)
3000 Operating Fluid Media General Purpose Hydraulic Fluid
Pressure Drop (PSI)

Pressure Drop (bar)

200
2500 Cartridge Torque Requirements 15 ft-lbs (20.3 Nm)
150
2000 Cavity MINI 2W
1500 100 Cavity Form Tool (Finishing) 40500003
1000 Seal Kit 21191000
50
500
0 0
0 2 4 6 8
Flow (GPM)

Port 2 to 1 Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MP6
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .29 lbs (.13 kg)

ORDERING INFORMATION

MA-RVA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

PRESSURE RANGE
0500 100 - 500 PSI
1500 500 - 1500 PSI
3000 1500 - 3000 PSI

without independent study, evaluation, and testing for suitability.

Page MP7
MECHANICAL PRESSURE CONTROLS

PB-RVA DIRECT ACTING RELIEF VALVE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, direct acting relief valve.

OPERATION
The PB-RVA blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the poppet to open and
allow metered flow from (2) to (1). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Pressure at port (1) must not exceed 2500 PSI.

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 6 GPM (23 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 5 10 15 20 25 30 35 Filtration ISO 18/16/13
4500 300 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
4000
250 Weight .30 lbs (.14 kg)
3500
Pressure Drop (PSI)

Pressure Drop (bar)

3000 Operating Fluid Media General Purpose Hydraulic Fluid

200
2500 Cartridge Torque Requirements 25 ft-lbs (34 Nm)
150
2000 Cavity POWER 2W
1500 100 Cavity Form Tool (Finishing) 40500005
1000
50 Seal Kit 21191100
500
0 0
0 2 4 6 8 10
Flow (GPM)

Port 2 to 1 Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MP8
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-RVA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

PRESSURE RANGE/SETTING
0800 100 - 800 PSI
2000 800 - 2000 PSI
3500 2000 - 3500 PSI

without independent study, evaluation, and testing for suitability.

Page MP9
MECHANICAL PRESSURE CONTROLS

DE-RVA DIRECT ACTING RELIEF VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, direct acting relief valve.

OPERATION
The DE-RVA blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the poppet to open and
allow metered flow from (2) to (1). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 5 10 15 20 25 30 35 40 45
4500 300
4000
250
Pressure Drop (BAR)

3500
Pressure Drop (PSI)

3000
PERFORMANCE 200 VALVE SPECIFICATIONS
2500
Actual 150
2000Test Data (Cartridge Only) Nominal Flow 4 GPM (15.6 LPM) 4000 PSI
1500 100 8 GPM (30 LPM) 3000 PSI
Flow (LPM)
1000 Rated Operating Pressure 4000 PSI (276 bar)
0 5 10 15 20 25 30 35 40 50 45
500
4500 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 0 300
4000
0 2 4 6 8 10 12
Filtration ISO 18/16/13
250
Pressure Drop (BAR)

3500 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

Pressure Drop (PSI)

Flow (GPM)
3000
Port 2 to 1 Port 2 to 1 Port 2 to 1
200 Weight .56 lbs (.25 kg)
2500
150 Operating Fluid Media General Purpose Hydraulic Fluid
2000
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
1500 100
1000 Cavity DELTA 2W
50
500 Cavity Form Tool (Finishing) 40500000
0 0 Seal Kit 21191200
0 2 4 6 8 10 12
Flow (GPM)

Port 2 to 1 Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MP10
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RVA – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK

PRESSURE RANGE/SETTING
1500 200 - 1500 PSI
3000 1500 - 3000 PSI
4000 2500 - 4000 PSI

without independent study, evaluation, and testing for suitability.

Page MP11
MECHANICAL PRESSURE CONTROLS

PB-RWA DIRECT ACTING RELIEF VALVE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, direct acting relief valve.

OPERATION
The PB-RWA blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the poppet to open and
allow metered flow from (2) to (1). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Pressure at port (1) must not exceed 2500 PSI.

PERFORMANCE VALVE SPECIFICATIONS

Pressure Drop (bar)

Operating Fluid Media General Purpose Hydraulic Fluid

3000 200
2500 Cartridge Torque Requirements 25 ft-lbs (34 Nm)
150 Cavity POWER 2W
2000
1500 100 Cavity Form Tool (Finishing) 40500005
1000 Seal Kit 21191100
50
500
0 0
0 2 4 6 8 10
Flow (GPM)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MP12
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-RWA – – –

OPTIONS BODIES
External Adj. W/Locknut Buna 00 Blank Without Body
External Adj. W/Locknut Viton V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK
Internal Adjust Buna 0I
Internal Adjust Viton VI
Tamper Proof Buna 0T PRESSURE RANGE/SETTING
Tamper Proof Viton VT Ext./Int. Adjustment
1000 100 - 1000 PSI
3500 500 - 3500 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP13
MECHANICAL PRESSURE CONTROLS

DE-RWA DIRECT ACTING RELIEF VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, direct acting relief valve.

OPERATION
The DE-RWA blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the poppet to open and
allow metered flow from (2) to (1). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
For critical leakage applications consult factory.

Flow (LPM)
0 5 10 15 20 25 30 35 40 45
4000
3500 250
Pressure Drop (PSI)

Pressure Drop (bar)

3000 200
2500
PERFORMANCE VALVE SPECIFICATIONS
150
2000
Actual Test Data (Cartridge Only)
1500
Nominal Flow 8 GPM (30 LPM)
100
Rated Operating Pressure 4000 PSI (276 bar)
1000 Flow (LPM)
50 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
500 0 5 10 15 20 25 30 35 40 45
4000 Filtration ISO 18/16/13
0 0
3500
0 2 4 6 8 10 12 250 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .51 lbs (.23 kg)
Pressure Drop (PSI)

Flow (GPM)
Pressure Drop (bar)

3000 200
2500 Port 2 to 1 Port 2 to 1 Operating Fluid Media General Purpose Hydraulic Fluid
150
2000 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
1500 100 Cavity DELTA 2W
1000 Cavity Form Tool (Finishing) 40500000
50
500 Seal Kit 21191200
0 0
0 2 4 6 8 10 12
Flow (GPM)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MP14
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RWA – – –

OPTIONS BODIES
Buna, External Adj. W/Locknut 00 Blank Without Body
Viton, External Adj. W/Locknut V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI
Buna, Tamper Proof 0T PRESSURE RANGE/SETTING
Viton, Tamper Proof VT Ext./Int. Adjustment
0500 100 - 500 PSI
3000 100 - 3000 PSI
4000 3000 - 4000 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP15
PRESSURE CONTROLS Delta Power Company
MECHANICAL PRESSURE CONTROLS
4484 Boeing Drive - Rockford, IL 61109

DE-RWF Direct
DE-RWF DIRECT ACTING
Acting RELIEF
Relief ValveVALVE
– Fast–Response
FAST RESPONSE
DESCRIPTION
DESCRIPTION
PRESSURE CONTROLS
10 size, 7/8-14 thread, “Delta” series, direct acting relief valve
10 size, 7/8-14 thread, “Delta” series, direct acting relief valve. Delta Power Company
OPERATION 4484 Boeing Drive - Rockford, IL 61109
The DE-RWF blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the poppet to open
OPERATION
and allow metered flow from (2) to (1).
The DE-RWF blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the poppet to open and
DE-RWF Direct Acting Relief Valve – Fast Response
allow
The metered
cartridge flow
offers from (2)
smooth to (1). The
transition cartridgetooffers
in response smooth transition
load changes in common in hydraulic
responsecircuits.
to load changes in common
DESCRIPTION
hydraulic circuits.
10 size, 7/8-14 thread, “Delta” series, direct acting relief valve
FEATURES
FEATURES
OPERATION
 Hardened parts for long life.
The• DE-RWF
 Hardened parts
blocks
Industry for from
flow
common long life.
(2) to (1) until sufficient pressure is present at (2) to force the poppet to open
cavity.
and• allow metered
Industry flow from
common (2) to (1).
cavity.

The cartridge offers smooth transition in response to load changes in common hydraulic circuits.

FEATURES
 Hardened parts for long life.
HYDRAULIC SYMBOL  Industry common cavity.
Fast response direct acting poppet style relief valve.
HYDRAULIC SYMBOL For critical leakage applications consult factory.
Fast response direct acting poppet style relief valve.
For critical leakage applications consult factory.

PERFORMANCE
HYDRAULIC SYMBOL
Actual Test Data (Cartridge Only) VALVE SPECIFICATIONS
Flow (LPM) Nominal Flow 20 GPM (75 LPM)
0 15 30 45 60 75 Rated Operating Pressure 4000 PSI (276 bar)
4000 Fast response direct acting poppet
Viscosity Range 36 style
to 3000 relief
SSUvalve.
(3 to 647 cSt)
250 For critical leakage applications consult
Filtration factory.
ISO 18/16/13
3500
Media Operating
-40 to 250 F (-40 to 120 C)
Pressure Drop (BAR)

3000
Pressure Drop (PSI)

200 Temperature Range

PERFORMANCE
2500 WeightVALVE SPECIFICATIONS .51 lbs. (.23 kg)
150 Operating Fluid Media General Purpose Hydraulic Fluid
PERFORMANCE
Actual2000
Test Data (Cartridge Only) Nominal Flow 20 GPM (76 LPM)
Actual 1500
Test Data (Cartridge Only) Cartridge
VALVE Torque
SPECIFICATIONS
100 Rated Operating Pressure 30 ft-lbs (40.64000
Nm) PSI (276 bar)
Requirements
Flow (LPM) Nominal Flow 20 GPM (75 LPM)
1000 CavityViscosity Range DELTA 2W 36 to 3000 SSU (3 to 647 cSt)
0 15 30 45 60 75 50 RatedFormOperating
CavityFiltrationTool
Pressure 40500000
4000 PSI (276 bar)
4000500 (Finishing) ISO 18/16/13
Viscosity
Seal Kit Range 36 to 3000 SSU (3 to 647 cSt)
21191200
0250
Media
Filtration Operating Temp. Range
ISO 18/16/13-40° to 250°F (-40° to 120°C)
3500 0
0 5 10 15 20 Weight
Media Operating .51 lbs (.23 kg)
-40 to 250 F (-40 to 120 C)
Pressure Drop (BAR)

3000
Pressure Drop (PSI)

Flow (GPM) 200 Temperature Range

Operating Fluid Media General Purpose Hydraulic Fluid
2500 Port 2 to 1 Port 2 to 1 Weight
Cartridge Torque Requirements.51 lbs. (.23 kg) (40.6 Nm)
30 ft-lbs
150 Operating
2000 Cavity Fluid Media General Purpose
DELTA 2W Hydraulic Fluid
Cartridge Torque
1500 100
Cavity Form Tool (Finishing) 30 ft-lbs (40.6 Nm)
40500000
Requirements
Seal Kit 21191200
1000 Cavity DELTA 2W
50 Cavity Form Tool (Finishing) 40500000
500
Seal Kit 21191200
0 0
0 5 10 15 20
Flow (GPM)data shown in our catalogs and data sheets are intended only as a general guide for the product described
WARNING: The specifications/application
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Port 2 to 1 Port 2 to 1
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]

without independent study, evaluation, and testing for suitability.

4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
WARNING:
mail: [email protected] • www.delta-power.com
The specifications/application data shown in our catalogs and data sheets are intended only
mail: [email protected] • www.tecnord.com
as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Page MP16 Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
PRESSURE CONTROLS Delta Power Compan
MECHANICAL PRESSURE CONTROLS
4484 Boeing Drive - Rockford, IL 611

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION
ORDERING INFORMATION
DE-RWFDE-RWF
- – - –- –

OPTIONS BODIES
External Adjust w/Locknut, Buna 00
OPTIONS Blank Without Body BODIES
External Adjust w/Locknut,
Buna, External V0
Viton Adj. W/Locknut 00 N 3/8 NPTF Ports
Blank Without Body
Knob,
Viton, External 0K
Buna Adj. W/Locknut V0 S #8 SAE Ports N 3/8” NPTF Ports
Knob, Viton Buna, VK Knob 0K S #8 SAE Ports
Internal Adjust, Buna 0I Knob
Viton, VK
Internal Adjust, Viton VI Adjust
Buna, Internal 0I
Tamper Proof, Buna 0T Adjust
Viton, Internal VI PRESSURE RANGE
Tamper Proof, Viton VT Proof
Buna, Tamper 0T0500 100 – 500 PSI
PRESSURE RANGE/SETTING
Viton, Tamper Proof VT3000 500 – 3000 Ext./Int.
PSI Adjustment
4000 2000 0500
– 4000100
PSI
- 500 PSI
3000 500 - 3000 PSI
Tamper 4000Proof
2000 - 4000 PSI
Fill In 4 Digit Pressure Setting
Example: 2500 = 2500
Tamper ProofPSI
Fill in 4 Digit Pressure Setting
Example: 2500 - 2500 PSI

without independent study, evaluation, and testing for suitability.

Page MP17
MECHANICAL PRESSURE CONTROLS

DE-RCD DIFFERENTIAL AREA RELIEF VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, differential area relief valve.

OPERATION
The DE-RCD blocks flow from (1) to (2) until sufficient pressure is present at (1) to force the poppet to open and
allow metered flow from (1) to (2). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL Installation Space Saving Product. Cannot be field

adjusted. Not recommended for crossover relief
valve applications, use DE-RWD.

Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55 60
4000
3500 250

3000
Pressure Drop (PSI)

200
Pressure Drop (bar)

PERFORMANCE VALVE SPECIFICATIONS

2500
150
Actual
2000 Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
1500 100 Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM)
1000 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 5 10 15 20 25 30 35 40 45 50 55 60
50
5004000 Filtration ISO 18/16/13
03500 0 250 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
0 2 4 6 8 10 12 14 16 Weight .37 lbs (.17 kg)
3000
Pressure Drop (PSI)

200
Pressure Drop (bar)

Flow (GPM) Operating Fluid Media General Purpose Hydraulic Fluid

2500
2500 3500 150 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
2000
Cavity DELTA 2W
1500 100
Cavity Form Tool (Finishing) 40500000
1000
50 Seal Kit 21191200
500
0 0
0 2 4 6 8 10 12 14 16
Flow (GPM)

2500 3500

without independent study, evaluation, and testing for suitability.

Page MP18
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RCD – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8 NPTF Ports
S #8 SAE Ports

PRESSURE RANGE/SETTING
2500 100 - 2500 PSI
3500 250 - 3500 PSI

without independent study, evaluation, and testing for suitability.

Page MP19
MECHANICAL PRESSURE CONTROLS

PB-RVD DIFFERENTIAL AREA RELIEF VALVE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, differential area relief valve.

OPERATION
The PB-RVD blocks flow from (1) to (2) until sufficient pressure is present at (1) to force the poppet to open and
allow metered flow from (1) to (2). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Pressure at port (2) must not exceed 2500 PSI.

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 8 GPM (30 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 5 10 15 20 25 30 35
Filtration ISO 18/16/13
4000
3500 250 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressu re Drop (PSI)

Pressure Drop (bar)

3000 200 Weight .31 lbs (.14 kg)

2500 Operating Fluid Media General Purpose Hydraulic Fluid
150
2000
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
1500 100
Cavity POWER 2W
1000
50 Cavity Form Tool (Finishing) 40500005
500
0 0 Seal Kit 21191100
0 2 4 6 8 10
Flow (GPM)

Port 1 to 2 Port 1 to 2 Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP20
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-RVD – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

PRESSURE RANGE/SETTING
0800 100 - 800 PSI
2000 800 - 2000 PSI
3500 2000 - 3500 PSI

without independent study, evaluation, and testing for suitability.

Page MP21
MECHANICAL PRESSURE CONTROLS

DE-RVD DIFFERENTIAL AREA RELIEF VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, differential area relief valve.

OPERATION
The DE-RVD blocks flow from (1) to (2) until sufficient pressure is present at (1) to force the poppet to open and
allow metered flow from (1) to (2). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Low PSI/turn adjustment.

Good pressure vs. flow characteristic.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 15 GPM (57 LPM)
Flow (LPM)
Rated Operating Pressure 4000 PSI (276 bar)
0 5 10 15 20 25 30 35 40 45 50 55 60
Viscosity
2000 Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (LPM) Media
1500 Operating Temp. Range -40° to 250°F (-40° to 120°C)
100
0 5 10 15 20 25 30 35 40 45 50 55 60
2000
Weight .57 lbs (.26 kg)
1000
Operating Fluid Media General Purpose Hydraulic Fluid
50
Pressure Drop (PSI)

Pressure Drop (bar)

PERFORMANCE
1500 100 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
500
Cavity DELTA 2W
Actual
1000
Test Data (Cartridge Only)
50 Cavity0 Form Tool (Finishing) 40500000 0
500
Seal Kit0 2 4 6 8 0 1
21191200 2 1 4 1 16
Flow (GPM)
0 0
0 2 4 6 8 0 1 2 1 4 1 16 P o rt 1 to 2 P o r t 1 to 2
Flow (GPM)

P o rt 1 to 2 Flow
P o r(LPM)
t 1 to 2 Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55 60 0 5 10 15 20 25 30 35 40 45 50 55 60
Flow (LPM)
2000 4500 300
0 5 10 15 20 25 30 35 40 45 50 55 60
4500
4000
300 250
Pressure Drop (PSI)

3500
Pressure Drop (bar)

Pressure Drop (PSI)

Pressure Drop (bar)

4000
1500 100
250
3500 3000
Pressure Drop (PSI)

Pressure Drop (bar)

200
3000 200 2500
1000
2500 150
150 2000
2000 50
1500 1500 100
500 100
1000 1000
50 50
500 500
0 0 0 0 0 0
0 0 22 44 6 6 8 8 10 1
02 1 1 42 1 16 4 1 16 0 2 4 6 8 10 12 14 16
Flow (GPM)
Flow (GPM) Flow (GPM)
P o rt 1 to 2 P o rt 1 to 2
P o rt 1 to 2 P o r t 1 to 2
P o rt 1 to 2 P o rt 1 to 2

Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55 60
4500 300
4000
3500 250
Pressure Drop (PSI)

Pressure Drop (bar)

3000 200
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 19 / 2020

2500
without independent study, evaluation, and testing for suitability.
150
2000
1500 100
1000
50
5 0 0 Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
4484 Boeing Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
0
mail: [email protected] • www.delta-power.com 0 mail: [email protected] • www.tecnord.com
0 2 4 6 8 10 12 14 16
Flow (GPM)
Page MP22
P o rt 1 to 2 P o rt 1 to 2
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RVD – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Screen A0 S #8 SAE Ports
Viton, Screen W0
Buna, Knob 0K
Viton, Knob VK
Buna, Knob, Screen AK PRESSURE RANGE/SETTING
Viton, Knob, Screen WK 0200 50 - 200 PSI
1500 200 - 1500 PSI
Note: use screen only if flow direction 3000 1500 - 3000 PSI
is from (1) to (2). 4000 2500 - 4000 PSI

without independent study, evaluation, and testing for suitability.

Page MP23
MECHANICAL PRESSURE CONTROLS

HE-RVD DIFFERENTIAL AREA RELIEF VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, differential area relief valve.

OPERATION
The HE-RVD blocks flow from (1) to (2) until sufficient pressure is present at (1) to force the poppet to open and
allow metered flow from (1) to (2). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Good pressure vs. flow characteristic.

HYDRAULIC SYMBOL Recommended Return Line Pressure as shown
on Performance Data Graph. Undercut Cavity
Recommended for Max flows (Consult Factory for
Details).

Flow (LPM)
0 10 20 30 40 50 60 70 80 90 100 110 120 130
4500 310
PERFORMANCE 4000 VALVE SPECIFICATIONS
260
3500
Actual Test Data (Cartridge Only) Nominal Flow210
40 GPM (151 LPM)
Pressure (PSI)

Pressure (bar)

3000 Rated Operating Pressure 5000 PSI (345 bar)

2500 160
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Flow (LPM)
0 10 20 2000
30 40 50 60 70 80 90 100 110 120 130 Filtration ISO 18/16/13
110
4500 310
1500 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
4000 260 60
1000 Weight .57 lbs (.26 kg)
3500
210 Operating Fluid
10 Media General Purpose Hydraulic Fluid
Pressure (PSI)

500
Pressure (bar)

3000
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
2500 0 160 -40
Cavity DELTA 2W
2000 0 5 10 15 20 110 25 30 35
Cavity Form Tool (Finishing) 40500000
1500 Flow (GPM)60 Seal Kit 21191200
1000
500 Port 1 to 2 Tank 10Port 1 to 2
0 -40
0 5 10 15 20 25 30 35

Flow (GPM)
Port 1 to 2 Tank Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP24
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

HE-RVD – – –

Note: use screen only if flow direction

is from (1) to (2).

Note: aluminum NOT durability rated for

without independent study, evaluation, and testing for suitability.

Page MP25
MECHANICAL PRESSURE CONTROLS

PB-RWD DIFFERENTIAL AREA RELIEF VALVE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, differential area relief valve.

OPERATION
The PB-RWD blocks flow from (1) to (2) until sufficient pressure is present at (1) to force the poppet to open and
allow metered flow from (1) to (2). The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Pressure at port (2) must not exceed 2500 PSI.

PERFORMANCE VALVE SPECIFICATIONS

Actual Test Data (Cartridge Only) Nominal Flow 8 GPM (30 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 5 10 15 20 25 30 35
Filtration ISO 18/16/13
4000
250 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
3500
Weight .32 lbs (.15 kg)
Pressure Drop (PSI)

3000
Pressure Drop (bar)

200 Operating Fluid Media General Purpose Hydraulic Fluid

2500
150 Cartridge Torque Requirements 25 ft-lbs (34 Nm)
2000
Cavity POWER 2W
1500 100
Cavity Form Tool (Finishing) 40500005
1000
50 Seal Kit 21191100
500
0 0
0 2 4 6 8 10
Flow (GPM)

Port 1 to 2 Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP26
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .39 lbs (.18 kg)

ORDERING INFORMATION

PB-RWD – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP27
MECHANICAL PRESSURE CONTROLS

DE-RWD DIFFERENTIAL AREA RELIEF VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, differential area relief valve.

OPERATION
The DE-RWD blocks flow from (1) to (2) until sufficient pressure is present at (1) to force the poppet to open and
allow metered flow from (1) to (2).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55 60
4500 300
4000
PERFORMANCE
3500 250 VALVE SPECIFICATIONS
Pressure Drop (PSI)

Pressure Drop (bar)

3000Test Data (Cartridge Only)

Actual 200 Nominal Flow 15 GPM (57 LPM)
2500 Rated Operating Pressure 4000 PSI (276 bar)
150
2000
Flow (LPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
1500 100
0 5 10 15 20 25 30 35 40 45 50 55 60 Filtration ISO 18/16/13
1000
4500 50
300 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
500
4000 Weight .55 lbs (.25 kg)
0
3500 0250
Pressure Drop (PSI)

Operating Fluid Media General Purpose Hydraulic Fluid

Pressure Drop (bar)

0 2 4 6 8 10 12 14 16
3000 200
Flow (GPM) Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
2500
150 Cavity DELTA 2W
2000 Port 1 to 2 Port 1 to 2 Port 1 to 2
Cavity Form Tool (Finishing) 40500000
1500 100
1000
Seal Kit 21191200
50
500
0 0
0 2 4 6 8 10 12 14 16
Flow (GPM)

Port 1 to 2 Port 1 to 2 Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP28
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RWD – – –

OPTIONS BODIES
Buna, External Adj. W/Locknut 00 Blank Without Body
Viton, External Adj. W/Locknut V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI
Buna, Tamper Proof 0T PRESSURE RANGE/SETTING
Viton, Tamper Proof VT Ext./Int. Adjustable
1000 100 - 1000 PSI
3000 100 - 3000 PSI
4000 3000 - 4000 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI
Note: aluminum NOT durability rated for
4000 PSI. Consult factory for options.
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 19 / 2020

without independent study, evaluation, and testing for suitability.

Page MP29
MECHANICAL PRESSURE CONTROLS

without independent study, evaluation, and testing for suitability.

Page MP30
MECHANICAL PRESSURE CONTROLS

PILOT OPERATED RELIEF VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

20 4000 76 276 7/8-14 DE-RVP MP32

20 5000 76 345 1 1/16-12 HT-RVP MP34

15 4000 57 276 7/8-14 DE-RVR MP36

40 3500 151 241 1 5/16-12 SJ-RVR MP38

15 4000 57 276 7/8-14 DE-RWP MP40

40 5000 151 345 7/8-14 HE-RWP MP42

15 4000 57 276 7/8-14 DE-RWR MP44

TYPICAL SCHEMATIC

Typical application for the RVP and RWP is to protect pump or system. Typical application for the RWR and RVR, is to be used as counterbalance
in a system where positive hydraulic locking is not required. In this schematic positive locking is done by using a P. O. check valve.

without independent study, evaluation, and testing for suitability.

Page MP31
MECHANICAL PRESSURE CONTROLS

DE-RVP PILOT OPERATED RELIEF VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pilot operated relief valve.

OPERATION
The DE-RVP blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the pilot stage open,
allowing the main stage to shift, opening (2) to (1). The cartridge offers smooth transition in response to load
changes in common hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 25 50 75
3000 200
PERFORMANCE
2500 VALVE SPECIFICATIONS
Pressure Drop (PSI)

Pressure Drop (bar)

150
Actual
2000 Test Data (Cartridge Only) Nominal Flow 20 GPM (76 LPM)

1500
Rated Operating Pressure 4000 PSI (276 bar)
100
Flow (LPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
1000 0 25 50 75
50
Filtration ISO 18/16/13
3000 200
500 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
2500 Weight .56 lbs (.25 kg)
0 0
Pressure Drop (PSI)

Pressure Drop (bar)

150
0
2000 5 10 15 20 Operating Fluid Media General Purpose Hydraulic Fluid
Flow (GPM) Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
1500 100
Port 2 to 1 Port 2 to 1 Cavity DELTA 2W
1000
50
Cavity Form Tool (Finishing) 40500000
500 Seal Kit 21191200
0 0
0 5 10 15 20
Flow (GPM)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MP32
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RVP – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK

PRESSURE RANGE/SETTING
4000 100 - 4000 PSI

without independent study, evaluation, and testing for suitability.

Page MP33
MECHANICAL PRESSURE CONTROLS

HT-RVP PILOT OPERATED RELIEF VALVE

DESCRIPTION
12 size, 1 1/16-12 thread, “Tecnord” series, pilot operated relief valve.

OPERATION
The HT-RVP blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the pilot stage off its seat,
allowing the main stage spool to shift, opening (2) to (1). The cartridge offers smooth transition in response to
load changes in common hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Undercut cavity recommended for circuits above

2500 PSI where flows go to 30 GPM.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 20 GPM (76 LPM)
Rated Operating Pressure 5000 PSI (345 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Standard cavity Weight Undercut cavity 1.13 lbs (.51 kg)
Flow (LPM) Operating Fluid Media Flow (LPM) General Purpose Hydraulic Fluid
PERFORMANCE
0 0 2 40 0 6 80 0 Torque Requirements
Cartridge 0 2 40 70 80 60
ft-lbs (95 Nm)
4500 300 4500
Cavity TECNORD 2W 300
Actual Test Data (Cartridge Only)
4000 4000Form Tool (Finishing)
Cavity 40500032
3500 250 3500 250
Seal Kit 21191300
Pressure (PSI)

Pressure (bar)
Pressure (PSI)

Pressure (bar)

3000 200 3000 200

2500 Standard cavity 2500 Undercut cavity
150 2000 150
2000 Flow (LPM) Flow (LPM)
1500 0 0 2 40 0 6 80 100 1500 0 0 2 40 60 80100
1000
4500 1000 4500
50 300 50 300
500
4000 500 4000
0
3500 0 250 0 3500 0 250
0 5 10 15 20 25
Pressure (PSI)

30000 5 10 15 20 25
Pressure (bar)
Pressure (PSI)

Pressure (bar)

200 3000 200

Flow (GPM) 2500 Flow (GPM)
2500
Tank PSI Inlet PSI 150 2000 Tank PSI Inlet PSI 150
2000
1500 100 1500 100
1000 1000
50 50
500 500
0 0 0 0
0 5 10 15 20 25 0 5 10 15 20 25
Flow (GPM) Flow (GPM)
Tank PSI Inlet PSI Tank PSI Inlet PSI

without independent study, evaluation, and testing for suitability.

Page MP34
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: 3.71 lbs (1.68 kg)

ORDERING INFORMATION

HT-RVP – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports
Buna, Knob 0K
Viton, Knob VK

PRESSURE SETTING
5000 100 - 5000 PSI

without independent study, evaluation, and testing for suitability.

Page MP35
MECHANICAL PRESSURE CONTROLS

DE-RVR PILOT OPERATED RELIEF VALVE, WITH REVERSE FLOW

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pilot operated relief valve with reverse flow.

OPERATION
The DE-RVR blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the pilot stage open,
allowing the main stage to shift, opening (2) to (1). The relief flow path is from (2) to (1). Free reverse flow, from
(1) to (2), occurs when the pressure at (1) is at least 10 PSI (.7 bar) higher than at port (2).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Consult Chart for flow capacity port (1) to (2).

Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55 60
4500 300
4000
PERFORMANCE 250
VALVE SPECIFICATIONS
3500
Pressure Drop (PSI)

Pressure Drop (bar)

Actual
3000 Test Data (Cartridge Only) 200 Nominal Flow 15 GPM (57 LPM)
2500 Rated Operating Pressure 4000 PSI (276 bar)
Flow (LPM) 150
2000 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
1500 0 5 10 15 20 25 30 35 40 45 50 55 100
60
Filtration ISO 18/16/13
1000 4500 300
50 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
500 4000
250 Weight .56 lbs (.25 kg)
0 3500
Pressure Drop (PSI)

0
Pressure Drop (bar)

3000
0 2 4 6 8 0 1 2 1 4 1 16 200 Operating Fluid Media General Purpose Hydraulic Fluid
2500 Flow (GPM) Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
150
2000
Port 2 to 1 Port 2 to 1 Port 1 to 2 Cavity DELTA 2W
1500 100
Cavity Form Tool (Finishing) 40500000
1000
500
50 Seal Kit 21191200
0 0
0 2 4 6 8 0 1 2 1 4 1 16
Flow (GPM)

Port 2 to 1 Port 2 to 1 Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP36
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RVR – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK

PRESSURE RANGE/SETTING
4000 100 - 4000 PSI

without independent study, evaluation, and testing for suitability.

Page MP37
MECHANICAL PRESSURE CONTROLS

SJ-RVR PILOT OPERATED RELIEF VALVE, WITH REVERSE FLOW

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, pilot operated relief valve with reverse flow.

OPERATION
The SJ-RVR blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the pilot stage off its seat,
allowing the main stage spool to shift, opening (2) to (1). The relief flow path is from (2) to (1). Reverse flow, from
(1) to (2), occurs when the pressure at (1) is at least 30 PSI (2.1 bar) higher then at port (2). The Cartridge offers
smooth transition in response to load changes in common hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 40 GPM (151 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Standard Body Standard Body
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Flow (LPM) Flow (LPM)
Weight 1.13 lbs (.51 kg)
0 25 50 75 100 125 0 25 50 75 100 125
2500 3500 Operating Fluid Media General Purpose Hydraulic Fluid
PERFORMANCE 150 3000 Cartridge Torque Requirements 90
200 ft-lbs (122 Nm)
2000
Pressure Drop (bar)

Pressure Drop (PSI)

Pressure Drop (bar)

2500 Cavity SUPER 2W
Actual Test Data (Cartridge Only)
1500 150
100 2000 Cavity Form Tool (Finishing) 40500017
1000 1500 Seal Kit 21191400
100
50 1000
500 50
500
0 Standard Body 0 0 Standard Body
0
0 5 10 15 20 25 30 0 5 10 15 20 25 30 35
Flow (LPM)
Flow (GPM) Flow (GPM)
Flow (LPM)
0 Port 225
to 1 Port50
2 to 1 75 1 to 2
Port 100 125 0 PSI
Tank 25
Inlet PSI 50 75 100 125
2500 3500
150 3000
2000 200
Pressure Drop (bar)

Pressure Drop (PSI)

Pressure Drop (bar)

2500
1500 100 150
2000

1000 1500 100

50 1000
500 50
500
0 0 0 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30 35
Flow (GPM) Flow (GPM)
Port 2 to 1 Port 2 to 1 Port 1 to 2 Tank PSI Inlet PSI

without independent study, evaluation, and testing for suitability.

Page MP38
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: 1.29 lbs (.59 kg)

ORDERING INFORMATION

SJ-RVR – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4” NPTF Ports
Buna, Knob 0K S #12 SAE Ports
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI
Buna, Tamper Proof 0T PRESSURE SETTING
Viton, Tamper Proof VT 3500 500 - 3500 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP39
MECHANICAL PRESSURE CONTROLS

DE-RWP PILOT OPERATED RELIEF VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pilot operated relief valve.

OPERATION
The DE-RWP blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the pilot stage open,
allowing the main stage to shift, opening (2) to (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 25 50 75
3000
PERFORMANCE 200 VALVE SPECIFICATIONS
2500
Actual Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
Pressure Drop (PSI)

Pressure Drop (bar)

150
2000 Rated Operating Pressure 4000 PSI (276 bar)
Flow (LPM) Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
1500 100
0 25 50 75
Filtration ISO 18/16/13
10003000 200 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
50
5002500 Weight .53 lbs (.24 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

150 Operating Fluid Media General Purpose Hydraulic Fluid

02000 0
0 5 10 15 20
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
1500 100
Flow (GPM) Cavity DELTA 2W
1000 Port 2 to 1 Port 2 to 1
Cavity Form Tool (Finishing) 40500000
50 Seal Kit 21191200
500

0 0
0 5 10 15 20
Flow (GPM)

Port 2 to 1 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MP40
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RWP – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI
Buna, Tamper Proof 0T PRESSURE RANGE/SETTING
Viton, Tamper Proof VT 4000 1000 - 4000 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP41
MECHANICAL PRESSURE CONTROLS

HE-RWP RAPID RESPONSE, PILOT OPERATED RELIEF VALVE

DESCRIPTION
High Pressure, High Flow, Rapid Response, 10 size, 7/8-14 thread, “Delta” series, pilot operated relief valve.

OPERATION
The HE-RWP blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the pilot stage open,
allowing the main stage to shift, opening (2) to (1).

FEATURES
• High pressure valve.
• Hardened parts for long life.
• Industry common cavity.
• Rapid response to sudden pressure application.
• Excellent regulation of pressure with flow (low override).

HYDRAULIC SYMBOL This is a rapid response, high pressure relief

valve with excellent high flow regulation. Consult
factory for higher flow capacity cavity option.

HERWP/Pressure drop vs flow

Flow (LPM)
PERFORMANCE
0 37 74 111 148
VALVE SPECIFICATIONS
5000
Actual Test Data (Cartridge Only) Nominal Flow 40 GPM (151 LPM)
Pressure Drop (PSI)

Pressure Drop (bar)

300
4000
240 Rated Operating Pressure 5000 PSI (345 bar)
3000 HERWP/Pressure drop vs flow
180 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
2000 Flow (LPM)
120 Filtration ISO 18/16/13
1000
0 37 74 111 148
60 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
5000
Pressure Drop (PSI)

Pressure Drop (bar)

0 0
4000 0
300 Weight .53 lbs (.24 kg)
10 20 30 40
240 Operating Fluid Media General Purpose Hydraulic Fluid
3000 Flow (GPM)
180 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
2000 HERWP at 4000 PSI HERWP at 2000 PSI
120 Cavity DELTA 2W
1000 60 Cavity Form Tool (Finishing) 40500000
0 0 Seal Kit 21191200
0 10 20 30 40
Flow (GPM)

HERWP at 4000 PSI HERWP at 2000 PSI

without independent study, evaluation, and testing for suitability.

Page MP42
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

ORDERING INFORMATION

HE-RWP – – –

OPTIONS BODIES
Buna Standard 00 Consult Factory
Viton Standard V0
Buna, Knob 0K
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI
Buna, Tamper Proof 0T PRESSURE RANGE/SETTING
Viton, Tamper Proof VT 5000 1000 - 5000 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 1500 - 1500 PSI

WARNING
DO NOT USE ALUMINUM BODY
HIGH PRESSURE (5000 PSI) PRODUCT

without independent study, evaluation, and testing for suitability.

Page MP43
MECHANICAL PRESSURE CONTROLS

DE-RWR PILOT OPERATED RELIEF VALVE, WITH REVERSE FLOW

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pilot operated relief valve with reverse flow.

OPERATION
The DE-RWR blocks flow from (2) to (1) until sufficient pressure is present at (2) to force the pilot stage open, and
allow metered flow from (2) to (1). The relief flow path is from (2) to (1). Free reverse flow, from (1) to (2), occurs
when the pressure at (1) is at least 10 PSI (.7 bar) higher than at port (2).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Consult chart for flow capacity (1) to (2).

Standard Body
Flow (LPM)
0 25 50 75
3000 200
PERFORMANCE
2500 VALVE SPECIFICATIONS
Pressure Drop (PSI)

Pressure Drop (bar)

150
2000
Actual Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
1500 100
Rated Operating Pressure 4000 PSI (276 bar)
Standard Body
1000
Flow (LPM) 50 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
500
0 25 50 75 Filtration ISO 18/16/13
0
3000 0 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
200
0 5 10 15 20
2500 Weight .53 lbs (.24 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (GPM)
150 Operating Fluid Media General Purpose Hydraulic Fluid
2000 Port 2 to 1 Port 2 to 1 Port 1 to 2
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
1500 100
Cavity DELTA 2W
1000
50 Cavity Form Tool (Finishing) 40500000
500 Seal Kit 21191200
0 0
0 5 10 15 20
Flow (GPM)
Port 2 to 1 Port 2 to 1 Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP44
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RWR – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP45
MECHANICAL PRESSURE CONTROLS

without independent study, evaluation, and testing for suitability.

Page MP46
MECHANICAL PRESSURE CONTROLS

CROSSOVER RELIEF VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

15 4000 57 276 7/8-14 DE-RVB MP48

15 4000 57 276 7/8-14 DE-RVC MP50

TYPICAL SCHEMATIC

Typical application for the RVC is in a series circuit where a load on motor #2 causes back pressure on motor #1 and relief valve #1. Vent in port
(2) of RV 1 allows spring to maintain proper load on motor #1 even though back pressure is present. Port (2) pressure into spring chamber to offset
back pressure. Vent at port (2) causes .2 GPM flow from port (2) to port (1).

Typical application for the RVB is in a parallel circuit where the load on motor #2 does not cause back pressure on motor #1. Relief valve maintains
differential pressure across motor because one side of motor always goes to tank.

without independent study, evaluation, and testing for suitability.

Page MP47
MECHANICAL PRESSURE CONTROLS

DE-RVB CROSSOVER RELIEF VALVE, FOR PARALLEL CIRCUITS

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, crossover relief valve for parallel circuit applications.

OPERATION
The DE-RVB is a direct-acting, cross over relief valve. When pressure at either port exceeds the nominal setting
value, flow will be diverted to the opposite port. Back pressure at either port will affect the nominal setting of the
opposite port on a 1:1 basis. For correlation purposes, pre-set value will be measured at port (2). Pressure at port
(1) will not vary more than ±300 PSI from the port (2) value. The cartridge offers smooth transition in response to
load changes in common hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL The DE-RVB is designed for parallel circuit

applications. For series circuits, use DE-RVC.

Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55 60
4500
300
PERFORMANCE
4000 VALVE SPECIFICATIONS
3500 250
Pressure Drop (PSI)

Pressure Drop (bar)

Actual Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM) from (2) to (1)
3000 200
20 GPM (76 LPM) from (1) to (2)
2500
Flow (LPM) 150 Rated Operating Pressure 4000 PSI (276 bar)
2000
0 5 10 15 20 25 30 35 40 45 50 55 60 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
1500 100
4500
1000
300 Filtration ISO 18/16/13
4000 50
500 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
3500 250
Pressure Drop (PSI)

Weight .80 lbs (.36 kg)

Pressure Drop (bar)

0 0
3000 200
0 2 4 6 8 10 12 14 16 Operating Fluid Media General Purpose Hydraulic Fluid
2500 Flow (GPM) Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
150
2000
Port 1 to 2 Port 1 to 2 Port 1 to 2 Cavity DELTA 2W
1500 100 Cavity Form Tool (Finishing) 40500000
1000 Seal Kit 21191202
50
500
0 0
0 2 4 6 8 10 12 14 16
Flow (GPM)

Port 1 to 2 Port 1 to 2 Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP48
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RVB – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP49
MECHANICAL PRESSURE CONTROLS

DE-RVC CROSSOVER RELIEF VALVE, FOR SERIES CIRCUITS

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, crossover relief valve for series circuit application.

OPERATION
The DE-RVC is a direct-acting, cross over relief valve. When pressure at either port exceeds the nominal setting
value, flow will be diverted to the opposite port. Back pressure at either port will affect the nominal setting of the
opposite port on a 1:1 basis. For correlation purposes, pre-set value will be measured at port (2). Pressure at port
(1) will not vary more than ±300 PSI from the port (2) value. The cartridge offers smooth transition in response to
load changes in common hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL The DE-RVC is designed for series circuit

applications with controlled leakage between ports
(2) and (1). For parallel circuits, use DE-RVB.

Flow (LPM)
0 5 10 15 20 25 30 35 40 45 50 55 60
4500
300
4000
250
PERFORMANCE
3500 VALVE SPECIFICATIONS
Pressure Drop (PSI)

Pressure Drop (bar)

3000 200
Actual
2500 Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM) from (2) to (1)
150
2000 20 GPM (76 LPM) from (1) to (2)
1500 Flow (LPM)
100 Rated Operating Pressure 4000 PSI (276 bar)
1000 0 5 10 15 20 25 30 35 40 45 50 55 60
4500 50 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
500 300
4000
0 0
Filtration ISO 18/16/13
250
35000 2 4 6 8 10 12 14 16 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

3000 Flow (GPM) 200 Weight .80 lbs (.36 kg)

2500 Port 1 to 2 Port 1 to 2 Port 1 to 2
150 Operating Fluid Media General Purpose Hydraulic Fluid
2000
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
1500 100
1000
Cavity DELTA 2W
50 Cavity Form Tool (Finishing) 40500000
500
0 0 Seal Kit 21191202
0 2 4 6 8 10 12 14 16
Flow (GPM)
Port 1 to 2 Port 1 to 2 Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP50
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-RVC – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP51
MECHANICAL PRESSURE CONTROLS

without independent study, evaluation, and testing for suitability.

Page MP52
MECHANICAL PRESSURE CONTROLS

PRESSURE COMPENSATED REGULATOR VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

10 3500 38 241 7/8-14 DF-PCR MP54

33 3500 120 241 Special QC-CP3 MP56

8 3500 30 241 3/4-16 PP-PCA MP58

40 3500 151 241 1 1/16-12 TR-PCA MP60

40 3500 151 241 1 5/16-12 SL-PCA MP62

10 3500 38 241 7/8-14 DG-PCB MP64

10 3500 38 241 7/8-14 DG-TCB MP66

8 3000 30 207 3/4-16 PP-PCC MP68

8 3500 30 241 7/8-14 DF-CP2 MP70

19 3500 70 241 Special QC-CP2 MP72

20 3500 76 241 1 1/16-12 TR-PCC MP74

10 3500 38 241 7/8-14 DF-PCE MP76

40 3500 151 241 1 5/16-12 SL-PCE MP78

10 3500 38 241 7/8-14 DF-PCS MP80

3 10 3500 38 241 7/8-14 DF-TCS MP82

10 3500 38 241 7/8-14 DF-PCT MP84

TYPICAL SCHEMATIC

These very flexible pressure compensator valves can regulate flow through many types of orifices: Electro-Proportional Orifices, Plate or Set
Screw Orifices, Needle Valves &/or even across the pressure drop of other control valve (s). When using multiple compensating devices in the
same circuit it is good practice to keep at least 50 PSID between their settings to reduce the likelihood of cross talking during dynamic events.

without independent study, evaluation, and testing for suitability.

Page MP53
MECHANICAL PRESSURE CONTROLS

DF-PCR PRESSURE COMPENSATING REGULATOR VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pressure compensating regulator valve.

OPERATION
The DF-PCR-0P with an orifice between ports (3) and (1) maintains a constant flow rate from (3) regardless of
load pressure changes in the system upstream of (3), or in the bypass leg at (2) as long as pressure at (2) is less
than (1). The valve’s spool maintains a constant differential pressure across an external orifice, thereby regulating
the hydraulic flow rate from (3) to (2) (see options table for pressure ranges). When used with an orifice as
described above, as a priority type regulator, delivering pump flow first to (3), then bypassing excess to (2). All
ports may be fully pressurized. The DF-PCR-0V with a dump valve and a pilot relief valve at (1) acts as main
stage of a ventable relief valve.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Can be used as a logic element.DF-PCR-0P is commonly

HYDRAULIC SYMBOL used as a bypass flow regulator (80 PSI recommended).
DF-PCR-0V is commonly used as the main stage of a
ventable relief valve (40 and 80 PSI recommended).

Flow (LPM)
0 5 10 15 20 25 30 35
250
15
PERFORMANCE VALVE SPECIFICATIONS
Pressure @ Port 3 (PSI) Pressure @ Port 3 (PSI)

Pressure @ Port 3 (bar)

200

Actual
150
Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
10
Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM)
100 Seat Ratio Area of Pilot is equal to the area
0 5 10 15 20 25 30 35
5 at Port (3)
250
50
15
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Pressure @ Port 3 (bar)

200
0 0 Filtration ISO 18/16/13
0 2 4 6 8 10 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
150 Flow (GPM) 10 Weight .19 lbs (.09 kg)
Port 3 to 2 Port 3 to 2 Operating Fluid Media General Purpose Hydraulic Fluid
100
5 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
50 Cavity DELTA 3W
Cavity Form Tool (Finishing) 40500001
0 0
Seal Kit 21191206
0 2 4 6 8 10
Flow (GPM)

Port 3 to 2 Port 3 to 2

without independent study, evaluation, and testing for suitability.

Page MP54
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-PCR – – –

OPTIONS BODIES
Buna, Pilot to Close 0P Blank Without Body
Viton, Pilot to Close VP N 1/4” NPTF Ports
Buna, Vent to Open 0V S #6 SAE Ports
Viton, Vent to Open VV

PRESSURE SETTING
0040 40 PSI
0080 80 PSI
0150 150 PSI
0200 200 PSI

without independent study, evaluation, and testing for suitability.

Page MP55
MECHANICAL PRESSURE CONTROLS

QC-CP3 PRESSURE COMPENSATING VALVE, BYPASS TYPE FOR 3 WAY FLOW CONTROL

DESCRIPTION
Special cavity, pressure compensating valve, bypass type, for 3 way flow control, normally closed.

OPERATION
The QC-CP3 with an orifice between ports (3) and (1) maintains a constant flow rate from (3) regardless of load
pressure changes in the system upstream of (3), or in the bypass leg at (2) as long as pressure at (2) is less than
(1). The valve’s spool maintains a constant differential pressure across an external orifice, thereby regulating the
hydraulic flow rate from (3) to (2), (see options table for pressure ranges). When used with an orifice as described
above, as a priority type regulator, delivering pump flow first to (3), then bypassing excess to (2). All ports may
be fully pressurized.

FEATURES
• Hardened parts for long life.
• Spring range from 8 to 24 bar.

Pressure compensator for 3 way flow control,

HYDRAULIC SYMBOL typically used with an external orifice between
ports (3) and (1). Port (1) should sense upstream
pressure of orifice.

PERFORMANCE 25 VALVE SPECIFICATIONS 023

Pressure @ Port 3 (bar)

Actual Test Data (Cartridge Only) Nominal Flow 33 GPM (120 LPM)
20 018
Rated Operating Pressure 3500 PSI (241 bar)
15
Pressure (bar) vs. flow (lt/min) Typical Internal Leakage 014
For various pressure compensator settings (150 SSU) 35 ml/min @ 250 bar
30 10 Viscosity Range 008 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
25 5 023
@ Port 3 (bar)

Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

Pressure @ Port 3 (bar)

0 Weight .35 lbs (.16 kg)

20 15 30018 45 60 75 90 105 120
Operating Fluid Media General Purpose Hydraulic Fluid
15 014 Cartridge
Flow Torque Requirements
(lt/min) 52 ft-lbs (70 Nm)
Cavity T031 (Special)
Pressure

10 008 Cavity Tools Kit

(form tool, reamer, tap) K-T031
5
Seal Kit 210902321
0
15 30 45 60 75 90 105 120
Flow (lt/min)
Flow (lt/min)

without independent study, evaluation, and testing for suitability.

Page MP56
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

(for bodies style and sizes see section “Accessories”)

ORDERING INFORMATION

QC-CP3 – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/2” BSP Ports
S #8 SAE Ports

PRESSURE SETTINGS
008 8 bar (115 PSI) @ 60 l/min
014 14 bar (200 PSI) @ 60 l/min
018 18 bar (260 PSI) @ 60 l/min
023 23 bar (330 PSI) @ 60 l/min

without independent study, evaluation, and testing for suitability.

Page MP57
PRESSURE CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
MECHANICAL PRESSURE CONTROLS
PRESSURE CONTROLS Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
PP-PCA Fixed
PP-PCA FIXED Pressure
PRESSURE Compensating Regulator
COMPENSATING Valve VALVE
REGULATOR
PRESSURE CONTROLSDESCRIPTION
PP-PCA Fixed8DESCRIPTION
Pressure
size, 3/4-16 Compensating Regulator
thread, “Power” series, Valve
pressure compensating
Delta Power Company
regulator valve.
4484 Boeing Drive - Rockford, IL 61109
OPERATION DESCRIPTION
8 size, 3/4-16 thread, “Power” series, pressure compensating regulator valve.
8 size, 3/4-16
The PP-PCA-0P with anthread,
orifice “Power”
betweenseries, pressure
ports (3) and (1)compensating regulatorflow
maintains a constant valve.
rate from (3) regardless
PP-PCA Fixed Pressure
of Compensating
load Regulator
pressure changes
OPERATION Valve
in the system upstream of (3), or in the bypass leg at (2) as long as pressure at
(2) lessOPERATION
TheisPP-PCA-0P
DESCRIPTION than (1).with an orifice between ports (3) and (1) maintains a constant flow rate from (3) regardless of
The PP-PCA-0P with an orifice between ports (3) and (1) maintains a constant flow rate from (3) regardless
8 load
size, pressure
3/4-16 thread,
of spool
loadchanges“Power”
pressure in theseries,
system pressure
upstream compensating
of upstream
(3), or in theregulatoror valve.
bypass inleg
theatbypass
(2) as long as(2)
pressure
as longatas(2)pressure
is less at
The valves maintainschanges
a constant in the system
differential of (3),
pressure across an external orifice,leg at
thereby regulating the
than (1). (2)
hydraulic flow israte
lessacross
than (1). this external orifice. (see options table for pressure ranges)
OPERATION
TheThe valves spool
PP-PCA-0P withmaintains
an orifice abetween
constantportsdifferential
and pressure
(3) differential
(1) maintainsacross an external
a constant flow orifice,
rate from thereby regulating the
(3) thereby
regardless
Thewith valves spool maintains a constant pressure across an external orifice, regulating the
ofWhen used
hydraulic
load pressureflow rate
hydraulic
anacross
orifice
changes
flow in
rate
as
this
thedescribed
external
system
across this
above,(see
orifice.
upstream
external
it functions
of options
(3),
orifice. or
(see
as
in a priority
table
the for
bypass
options table
type
pressure
leg
for
regulator,
atranges).
(2)
pressure as delivering
When
long
ranges) asused pump
with flow
pressure an
at orifice
first
(2) to thethanexternal orifice, then bypassing excess to (2). All ports may be fully pressurized.
asisdescribed
less (1).
above, it functions as a priority type regulator, delivering pump flow first to the external orifice, then
1 bypassing Whenexcessusedto with
(2). an ports
All orificemayasand
described
beafully above, it functions as aas priority
withtype regulator, delivering
pilotpump
reliefflow
The
The PP-PCA-0V
valves spool with a dump
maintains valve
a constant pilotpressurized.
differential relief
pressurevalve The PP-PCA-0V
at (1) acts main a dump
stage of valve and arelief
a regulating
ventable
valve.
valve at first
(1) to the
acts as external
main orifice,
stage of a then bypassing
ventable relief excessacross
valve. to (2). an
All external
ports may orifice, thereby
be fully pressurized. the
hydraulic flow rate across this external orifice. (see options table for pressure ranges)
1
2 The PP-PCA-0V with a dump valve and a pilot relief valve at (1) acts as main stage of a ventable relief
FEATURES
FEATURES
valve. When used with an orifice as described above, it functions as a priority type regulator, delivering pump flow
first the Hardened parts then
for long life.
• toHardened
external
Industry
orifice,
parts for long
common
bypassing
life.
cavity.
excess to (2). All ports may be fully pressurized.
1 2
• PP-PCA-0V FEATURES
Industry common
3 The  with a cavity.
dumpparts
Hardened valvefor and a life.
long pilot relief valve at (1) acts as main stage of a ventable relief
valve.  Industry common cavity. Can be used as a logic element.
2 3 FEATURES
HYDRAULIC SYMBOL
PP-PCA-0P is commonly used as a bypass flow regulator
HYDRAULIC SYMBOL  Hardened parts for long life.
(80 PSI recommended).
 Industry common cavity. Can be used as a logicPP-PCA-0V element.
is commonly used as the main stage of a
1 1 ventable relief valve (40 and 80 PSI recommended).
3
HYDRAULIC SYMBOL PP-PCA-0P is commonly used as a bypass flow regulator (80 PSI
3 2 3 1 2 recommended).
1 Can be used as a logic element.
PP-PCA-0V is commonly used as the main stage of a ventable
PP-PCA-0P is commonly used as a bypass flow regulator (80 PSI
HYDRAULICPCA-0P
SYMBOL 2 PCA-0V relief valve (40 and 80 PSI recommended).
3 3 2 recommended).
Can be usedPP-PCA-0V
as a logiciselement.
commonly used as the main stage of a ventable
1 1
PERFORMANCE PCA-0P PCA-0V PP-PCA-0P relief valve (40 and
is commonly 80as
used PSI recommended).
a bypass flow regulator (80 PSI
Actual
3 Test Data2 (Cartridge
3 Only) 2 VALVE
recommended). SPECIFICATIONS
PP-PCA-0VNominal Flow
is commonly 8 GPM
used as the main(30 LPM)
stage of a ventable
PERFORMANCE
Rated
relief valve (40Operating
and 80 Pressure
PSI 3500 PSI (241 bar)
recommended).
PCA-0P
Actual Test Data FlowPCA-0V
(LPM) Only)
(Cartridge VALVE SPECIFICATIONS Area of Pilot is equal to the area at
Seat Ratio Nominal Flow Port (3) 8 GPM (30 LPM)
0
PERFORMANCE 10 20 30 VALVE SPECIFICATIONS
250 Rated Operating Pressure 3500
PERFORMANCE Flow (LPM) 16 Viscosity Range 36 to 3000 SSUPSI (3 to(241
647bar)
cSt)
Actual Test Data (Cartridge Only) Nominal Flow 8 GPM
Area of (30
PilotLPM)
is equal to the area at
Pressure @ Port 3 (BAR)

Actual200
Test Data (Cartridge Only) Filtration
VALVE SPECIFICATIONS ISO 18/16/13
Pressure @ Port 3 (PSI)

0 10 20 30 Seat Ratio
250 Rated
Media Operating Pressure
Operating Port
3500(3) PSI (241 bar)
12 Nominal Flow 8 -40
GPMto(30 250LPM)F (-40 to 120
16Temperature
Seat Viscosity
Ratio Range Range 36 to 3000 SSU (3 C)
to 647 cSt)
150 Rated Operating Pressure 3500 PSI (241 bar)Pilot is equal to the area
Area of
Pressure @ Port 3 (BAR)

Flow (LPM) Filtration ISO 18/16/13

Pressure @ Port 3 (PSI)

200 Weight
.19 lbs.
Area (.08
of Pilot kg)
atisPort (3) to the area at
equal
0 10 20 30 8 Seat Ratio Media Operating
100 12Operating
Viscosity Fluid
Range Media
General
Port (3) Purpose
-40
36 toto3000Hydraulic
250 SSU (3 Fluid
F (-40toto 120
647 cSt)C)
250 150 Temperature
CartridgeRangeTorque Range
16 Viscosity
Filtration 36 to 3000
25 ft-lbs (34 SSU
ISONm) (3 to
18/16/13 647 cSt)
4 Weight .19 lbs. (.08 kg)
Pressure @ Port 3 (BAR)

50 Requirements
Filtration
8 ISO 18/16/13
Pressure @ Port 3 (PSI)

200 100 OperatingTemp.

Media Operating Fluid Range
MediaPOWER
General
-40° to 250°FPurpose(-40°Hydraulic
to 120°C) Fluid
Cavity
Media Operating 3W
12 Cartridge Torque -40 to 250 F (-40 to 120 C)
0 0 Weight
Cavity Form
Temperature Range Tool (Finishing) 40500024 .19 lbs (.09
25 ft-lbs (34 Nm) kg)
150 4
0 50 2 4 6 8 10 Seal Kit Requirements
Operating
Weight Fluid Media 21191106
.19 lbs. (.08General
kg) Purpose Hydraulic Fluid
Flow (GPM) 8 Cavity POWER 3W
100 Operating
Cartridge Fluid Media
Torque RequirementsGeneral
Purpose
25 Hydraulic
ft-lbs (34 Nm) Fluid
0 0 Cavity Form Tool (Finishing) 40500024
0 Port 23 to 2 Port
4 3 to 2 6 8 10 Cartridge
Cavity Torque
Seal Kit 25 ft-lbs (34 Nm) 3W
POWER
21191106
50 4 Requirements
Flow (GPM) Cavity Form Tool (Finishing) 40500024
Cavity POWER 3W
0 Port 3 to 2 Port 3 to 2 0 Cavity Form Tool (Finishing) 40500024 21191106
Seal Kit
0 2 4 6 8 10 Seal Kit 21191106
Flow (GPM)
WARNING: The specifications/application
Port 3 to 2 data
Port 3 toshown
2 in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 19 / 2020

without independent
WARNING: The study, evaluation, and testing for suitability.
specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: [email protected]
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.delta-power.com mail: [email protected] • www.tecnord.com

Page MP58
PRESSURE CONTROLS Delta Power Company
MECHANICAL PRESSURE CONTROLS
4484 Boeing Drive - Rockford, IL 61109
DIMENSIONS

DIMENSIONS
1.13
[28.6]

.87 [22.2]
1.25
HEX. [31.8]
.63
[15.9]

1.18 Ø.281 [7.1] (2X)

[29.9] MTG. HOLE

.25 [6.3]
.58
.22 [5.5] [14.8]
1.17
2.82 [29.7]
[71.6]
3/4-16 UNF-2A 2.25
[57.2] 2.50
THREAD [63.5]
1.61
[41.0]
#6 SAE PORT
(3X)

.25 [6.4] 1.75 [44.5]

2.25 [57.2]

Body Weight: .56 lbs (.55 kg)

BODY WEIGHT: .56 lbs [

ORDERING INFORMATION
ORDERING INFORMATION
PP-PCA - - -
PP-PCA – – –
OPTIONS BODIES
Buna, Vent to Open 0V Blank Without Body
Buna, Pilot to Close OPTIONS
0P N 1/4 NPTF Ports BODIES
Viton, Vent to Buna, to Open 0V
Open Vent VV S #6 SAE Blank
Ports Without Body
to Close 0P
Buna, Pilot VP
Viton, Pilot to Close N 1/4” NPTF Ports
Viton, Vent to Open VV PRESSURE SETTING S #6 SAE Ports
Viton, Pilot to Close VP
0040 40 PSI
0080 80 PSI
0150 150 PSI
0200 200 PSIPRESSURE SETTING
0040 40 PSI
0080 80 PSI
0150 150 PSI
0200 200 PSI

without independent study, evaluation, and testing for suitability.

Page MP59
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
MECHANICAL PRESSURE CONTROLS

TR-PCA PRESSURE COMPENSATING REGULATOR VALVE

DESCRIPTION
12 size, 1 1/16-12 thread, “Tecnord” series, pressure compensating regulator valve.

OPERATION
The TR-PCA-0P with an orifice between ports (3) and (1) maintains a constant flow rate from (3) regardless of
load pressure changes in the system upstream of (3), or in the bypass leg at (2) as long as pressure at (2) is less
than (1). The valve’s spool maintains a constant differential pressure across an external orifice, thereby regulating
the hydraulic flow rate across this external orifice (see options table for pressure ranges). When used with an
orifice as described above, it functions as a priority type regulator, delivering pump flow first to the external orifice,
then bypassing excess to (2). All ports may be fully pressurized. The TR-PCA-0V with a dump valve and a pilot
relief valve at (1) acts as main stage of a ventable relief valve.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Can be used as a logic element. TR-PCA-0P is commonly

HYDRAULIC SYMBOL used as a bypass flow regulator (90 and 150 PSI
recommended). TR-PCA-0V is commonly used as the
main stage of a ventable relief valve (50 and 90 PSI
recommended).

Flow ( LPM)
PERFORMANCE
0 25 50 75 100 125 150 VALVE SPECIFICATIONS
350
Actual Test Data (Cartridge Only) Nominal Flow 40 GPM (151 LPM)
300 20 Rated Operating Pressure 3500 PSI (241 bar)
Pressure @ Port 3 (BAR)
3 (PSI) @ Port 3 (PSI)

250 Flow ( LPM)

Seat Ratio Area of Pilot is equal to the area
0 25 50 75 100 125 150
15
200 at Port (3)
350
150 10
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
300
Pressure @ Port Pressure

20
Pressure @ Port 3 (BAR)

100
Filtration ISO 18/16/13
250 5 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
50 15
200 Weight .54 lbs (.24 kg)
0 0
150 0 Operating Fluid Media General Purpose Hydraulic Fluid
5 10 15 20 25 30 35 40 10
Flow (GPM) Cartridge Torque Requirements 70 ft-lbs (95 Nm)
100
Port 3 to 2 Port 3 to 2 5 Cavity TECNORD 3WS
50
Cavity Form Tool (Finishing) 40500033
0 0 Seal Kit 21191306
0 5 10 15 20 25 30 35 40
Flow (GPM)
Port 3 to 2 Port 3 to 2

without independent study, evaluation, and testing for suitability.

Page MP60
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: 1.56 lbs (.70 kg)

ORDERING INFORMATION

TR-PCA – – –

OPTIONS BODIES
Buna, Pilot to Close 0P Blank Without Body
Viton, Pilot to Close VP S #10 SAE Ports
Buna, Vent to Open 0V
Viton, Vent to Open VV

Δ P SETTING
@ 1 GPM with Pilot Vented
0020 20 PSI
0050 50 PSI
0090 90 PSI
0150 150 PSI
0230 230 PSI
±10%

without independent study, evaluation, and testing for suitability.

Page MP61
MECHANICAL PRESSURE CONTROLS

SL-PCA PRESSURE COMPENSATING REGULATOR VALVE

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, pressure compensating regulator valve.

OPERATION
The SL-PCA-0P with an external orifice between ports (3) and (1) maintains a constant flow rate across the
external orifice, regardless of load pressure changes in the system upstream of (3), or in the bypass leg at
(2) as long as pressure at (2) is less than (1). The valve’s spool maintains a constant differential pressure
across the external orifice, thereby regulating the hydraulic flow rate across the external orifice (see options
table for pressure ranges). When used with an orifice as described above, it functions as a priority type regulator,
delivering pump flow first to the external orifice, then bypassing excess to (2). All ports may be fully pressurized.
The SL-PCA-0V with a dump valve and a pilot relief valve at (1) acts as main stage of a ventable relief valve.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Can be used as a logic element. SL-PCA-0P is commonly

used as a bypass flow regulator (100 PSI recommended).
SL-PCA-0V is commonly used as the main stage of a
ventable relief valve (50 and 100 PSI recommended).

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 40 GPM (151 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) Seat Ratio Initially area of Pilot is 1.2 times
0 25 50 75 100 125 150
350 the area at Port (3), then 1:1
300 Viscosity Range Flow (LPM) 36 to 3000 SSU (3 to 647 cSt)
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (bar)

20
250 0 25 50 75 100 125 150
15 Filtration
350 ISO 18/16/13
200
Media300Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (bar)

150 10 20
250
100
5
Weight .70 lbs (.32 kg) 15
50 200
0 0
Operating
150
Fluid Media General Purpose Hydraulic Fluid
10
0 5 10 15 20
Flow (GPM)
25 30 35 40 Cartridge
100 Torque Requirements 90 ft-lbs (122 Nm)
5
Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity) Cavity 50
SUPER 3WS
PERFORMANCE 0 0
Cavity Form
0
Tool5 (Finishing)
10
15 20
40500021
25 30 35 40
Actual Test
0
Data25(Cartridge
50
Only)
Flow (LPM)
75 100 125 150 Seal Kit Flow (GPM) 21191406
400 Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity)

350 25
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (bar)

300 20 Flow (LPM)

250 Flow (LPM)
0 25 50 75 100 125 150
0 25 50 75 100 125 150
15
200 400
350
150 10 350 25
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (bar)

300
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (bar)

100 20
300 20
250 5
50
15 250
200 0 0 15
200
150 0 5 10 15 20 25 30 35 40 10
Flow (GPM) 150 10
100
Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity) 5 100
50 5
50
0 0
0 0
0 5 10 15 20 25 30 35 40
Flow (GPM) 0 5 10 15 20 25 30 35 40
Flow (GPM)
Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity)
Port 3 to 2 (Undercut Cavity) Port 3 to 2 (Standard Cavity)

Flow (LPM)
0 25 50 75 100 125 150
400
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 19 / 2020

350independent study, evaluation, and testing for suitability.

without 25
Pressure @ Port 3 (PSI)

Pressure @ Port 3 (bar)

300 20
250
15
200
4484 Boeing
150 Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815)
10 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected]
100 • www.delta-power.com mail: [email protected] • www.tecnord.com
5
50
Page MP62
0 0
0 5 10 15 20 25 30 35 40
Flow (GPM)
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: 1.89 lbs (.86 kg)

ORDERING INFORMATION

SL-PCA – – –

OPTIONS BODIES
Buna, Pilot to Close 0P Blank Without Body
Viton, Pilot to Close VP S #12 SAE Ports
Buna, Vent to Open 0V
Viton, Vent to Open VV
Buna, Pilot to Close with Seals 0B
Viton, Pilot to Close with Seals VB
Buna, Vent to Open with Seals 0C Δ P SETTING
Viton, Vent to Open with Seals VC @ 1 GPM with Pilot Vented
0020 20 PSI
0050 50 PSI
0100 100 PSI
0150 150 PSI

without independent study, evaluation, and testing for suitability.

Page MP63
MECHANICAL PRESSURE CONTROLS

DG-PCB PRESSURE COMPENSATING VALVE, RESTRICTIVE TYPE WITH BY-PASS

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pressure compensating valve, restrictive type with bypass.

OPERATION
The DG-PCB allows pressure compensated or proportional flow from (1) to (2) regulated by the pressure
differential across (1) and (4) with a bypass of (4) to (3). The spring chamber is constantly connected at (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

DG-PCB is not intended for differential pressure more

HYDRAULIC SYMBOL than 1500 PSI from (4) to (3). Consult Factory for abrupt
pressure change applications that exceed 1500 PSI, for
alternative products.

Pressure @ Port 2 (bar)

0 PERFORMANCE
50 100 150 200 VALVE SPECIFICATIONS
10 Actual Test Data (Cartridge Only with 150 PSI Spring) Nominal Flow 10 GPM (38 LPM)
35
10 GPM Supply flow, .110” Orifice, 150 PSI spring Rated Operating Pressure 3500 PSI (241 bar)
8 15 GPM Suply flow, .156” Orifice, 150 PSI spring - 1500 PSI load on port (3) 30 Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min) per path
Regulated Flow @

25 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)

Port 2 (LPM)

Pressure @ Port 2 (bar) Pressure @ Port 2 (bar)

6 0 50 0100 50150 200
100 150 200 Filtration ISO 18/16/13
10 10 20
35 Media
35 Operating Temp. Range -40° to 250°F (-40° to 120°C)
4 8 8 30 15 30
Weight .38 lbs (.17 kg)
Regulated Flow @

Regulated Flow @
Regulated Flow @

Regulated Flow @
Port 2 (GPM)

25
Port 2 (GPM)

25
Port 2 (LPM)

Port 2 (LPM)

6 6
20
10 Operating
20
Fluid Media General Purpose Hydraulic Fluid
2
4 4 15
5 Cartridge
15 Torque Requirements 30 ft-lbs (40.6 Nm)
10
2 2 Cavity
10 DELTA 4W
0 5 0 5
Cavity Form Tool (Finishing) 40500002
0 500 0
1000 1500
0 2000 25000 3000 0
0 500 1000 0 1500 5002000 10002500 15003000 2000 2500 Seal
3000 Kit 21191214
PressurePressure
@ Port 2 (PSI)
@ Port 2 (PSI) Pressure @ Port 2 (PSI)
.110" dia. orifice .156" dia. orifice
.110" dia. orifice .156" dia. orifice
.110" dia. orifice .156" dia. orifice
Priority port (2) load: 1500-1700 psi, .156” dia orifice, 15 gpm supply Priority port (2) load: 1500-1700 PSI, .110” dia orifice, 10 GPM supply
not intended for differential pressure > 1500 psi port (4) to port (3) not intended for differential pressure > 1500 PSI port (4) to port (3)

Pressure @ Port 3 (bar) Pressure @ Port 3 (bar) Pressure @ Port 3 (bar) Pressure @ Port 3 (bar)
0 50 0 100 50 150 100 200 150 0 200 50 100
0 150
50 200
100 150 200
10 10 10 10
35 35 35 35
8 Pressure @8 Port 3 (bar) 30 8 30 8 Pressure @ Port 330(bar)
30
Flow (GPM)

Flow (GPM)
Flow (GPM)

Flow (GPM)
Flow (LPM)

Flow (LPM)
Flow (LPM)

Flow (LPM)

25 25 25 25
6 6 6 6
0 4
50 4
100 20
15
150 200 4
20
15 4 0 50
20
15 100
20
15
150 200
0 2 2
10
2
10 10
2
10 10
5 35 5 5 5 35
0 0 0 0 0 0 0 0
8 0 500 1000 0 1500 500 2000 10002500 15003000 2000 30 1000 81500
0 2000
500 2500 0
2500
1000 2000 500
2500
3000 3000
1500 3000 30
Flow (GPM)
Flow (LPM)

Pressure @ Port 3 (PSI) Pressure @ Port 3 (PSI) 25 Pressure @ Port 3 (PSI) Pressure @ Port 3 (PSI) 25
6 6
Port 2 flow Port 3 flow Port 2 flow Port 3 flow 20 Port 2 flow Port 3 flow Port 2 flow Port 3 flow 20
4 WARNING: the specifications/application data shown in our catalogs and data sheets are intended only15 4
as a general guide for the product described (herein). Any specific application should not be undertaken 15
W 19 / 2020

without independent study, evaluation, and testing for suitability.

10 10
2 2
5 5
0 0 0 0
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
0 500 1000 1500 2000 2500 3000 mail: [email protected] 0 500 1000 1500 2000 2500 3000
mail: [email protected] • www.delta-power.com • www.tecnord.com
Pressure @ Port 3 (PSI) Pressure @ Port 3 (PSI)
Page MP64
Port 2 flow Port 3 flow Port 2 flow Port 3 flow
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-PCB – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

PRESSURE DIFFERENTIAL
0150 150 PSI
0250 250 PSI

Differential Pressure Across

External Controlling Orifice

without independent study, evaluation, and testing for suitability.

Page MP65
MECHANICAL PRESSURE CONTROLS

DG-TCB PRESSURE COMPENSATING VALVE, RESTRICTIVE TYPE WITH BYPASS

10 GPM supply flow, .110" orifice, 150 PSI spring 15
- GPM supply flow, .156" orifice, 150 PSI spring1500
- PSI load on port 3

DESCRIPTION 0 50
Pressure @ Port 2 (BAR)
100 150 200
10
10 size, 7/8-14 thread, “Delta” series, pressure compensating 35 valve, restrictive type with bypass.
8
30

Regulated Flow @

Regulated Flow @
Port 2 (GPM)

Port 2 (LPM)
6 25

OPERATION 4
20
15

The DG-TCB allows pressure compensated or proportional

2 10
5
flow from (1) to (2) regulated by the pressure
differential across (1) and
0
0
(4)500with1000a bypass
1500
of (4)
2000 2500
to 3000
(3).
0 The spring chamber is constantly connected at (1).
Pressure @ Port 2 (PSI)
.110" dia. orifice .156" dia. orifice

FEATURES
• Hardened parts for longer life.
Priority port 2 load: 1500 - 1700 PSI, .156" dia orifice, 15 GPM supply Priority port 2 load: 1500 - 1700 PSI, .110" dia orifice, 10 GPM supply
not intended for differential pressure > 1500 PSI port 4 to port 3 not intended for differential pressure > 1500 PSI port 4 to port 3

Pressure @ Port 3 (BAR) Pressure @ Port 3 (BAR)

• Industry common cavity.
0 50 100 150 200 0 50 100 150 200
10 10
35 35
8 30 8 30
Flow (GPM)

Flow (LPM)

Flow (GPM)

Flow (LPM)
25 25
6 6
20 20
4 15 4 15

2
10
5
2 Bypass line (3) can be pressurized. 10
5
0 0 0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000

Pressure @ Port 3 (PSI) Pressure @ Port 3 (PSI)

Port 2 flow Port 3 flow Port 2 flow Port 3 flow

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

10 GPM supply flow, .110" orifice, 150 PSI spring 15
- GPM supply flow, .156" orifice, 150 PSI spring1500
- PSI load on port 3
4 1 Nominal Flow 10 GPM (38 LPM)
Rated Operating PressurePressure
3500
@ Port PSI (241 bar)
2 (BAR)
Typical 0Internal Leakage
50 100 150 200
(15010
SSU) 5 cu in/min (82 ml/min) per path
35
Viscosity
8 Range 36 to 3000 SSU (3 to 647 cSt)
30
Regulated Flow @

Regulated Flow @
3 2 Filtration ISO 18/16/13
Port 2 (GPM)

Port 2 (LPM)
25
Media6 Operating Temp. Range -40° to 250°F (-40° to 120°C)
20
PERFORMANCE Weight
4
.38 lbs (.17 kg)
15
Operating Fluid Media General Purpose Hydraulic Fluid
Actual Test Data (Cartridge Only) 2
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
10
5
Cavity DELTA 4W
0 0
Cavity Tools
0 Kit 500 1000 1500 2000 2500 3000
(form tool, reamer, tap) 40500002
Pressure @ Port 2 (PSI)
Seal Kit .110" dia. orifice 21191214
.156" dia. orifice

10 GPM supply flow, .110” orifice, 150 PSI spring - 15 GPM supply flow, Priority port 2 load: 1500 - 1700 PSI, .156” dia orifice, 15 GPM supply
10 GPM supply flow, .110" orifice, 150 PSI spring 15
- GPM supply flow, .156" orifice, 150 PSI spring1500
- PSI load on port 3 Priority port 2 load: 1500 - 1700 PSI, .156" dia orifice, 15 GPM supply
.156” orifice, 150 PSI spring - 1500 PSI load on port 3 notintended
not intendedfor
fordifferential
differentialpressure
pressure>>1500
1500PSI
PSIport
port44totoport
port33

Pressure
Pressure@
@Port
Port 22 (BAR)
(bar) Pressure @@
Pressure Port
Port3 3(BAR)
(bar)
0 50 100 150 200 0 50 100 150 200
10
10
@(GPM)

Regulated Flow @ Port 2 (LPM)

35 35
8 8 30
(GPM)

(LPM)

30
Regulated Flow @

Flow(GPM)

Flow(LPM)

25
Port 2

6
Port 2 (GPM)

Port 2 (LPM)
Flow @Flow

6 25 20
4 15
Flow
Flow

20
Regulated

4 10
15 2
5
0 0
Regulated

2 10
5 0 500 1000 1500 2000 2500 3000
0 0 Pressure @ Port 3 (PSI)
Pressure @ Port 3 (PSI)
0 500 1000 1500 2000 2500 3000
Port Port
─ 2 flow Port
2 flow ─ Port
3 3flow
flow
Pressure
Pressure @ Port 22 (PSI)
(PSI)
.110" dia.dia.
─ .110” orifice
orifice ─.156"
.156”dia.
dia.orifice
orifice

without independentPriority
study, port 2 load: 1500
evaluation, - 1700 PSI,
and testing .156" dia orifice, 15 GPM supply
for suitability. Priority port 2 load: 1500 - 1700 PSI, .110" dia orifice, 10 GPM supply
not intended for differential pressure > 1500 PSI port 4 to port 3 not intended for differential pressure > 1500 PSI port 4 to port 3

Pressure @ Port 3 (BAR) Pressure @ Port 3 (BAR)

0 50 100 150 200 0 50 100 150 200
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
10
mail: [email protected] • www.delta-power.com
10
mail: [email protected] • www.tecnord.com
35 35
8 30 8 30
low (GPM)

low (LPM)

low (GPM)

low (LPM)

Page MP66 25 25
6 6
20 20
4 15 4 15
Regul
Po

MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Priority port 2 load: 1500 - 1700 PSI, .110” dia orifice, 10 GPM supply
Priority port 2 for
not intended load: 1500 - 1700
differential PSI, .110"
pressure dia PSI
> 1500 orifice,
port104 GPM supply
to port 3
not intended for differential pressure > 1500 PSI port 4 to port 3

Pressure
Pressure@
@Port
Port 33 (BAR)
(bar)

0 50 100 150 200

10
5 35
0 8 30
Flow (LPM)

Flow (GPM)

(LPM)
Flow (GPM)

Flow (LPM)
5 6
25
0 20
5 4 15

Flow
0 10
2
5
0 0
0 500 1000 1500 2000 2500 3000

Pressure @ Port 3 (PSI)

Pressure @ Port 3 (PSI)
─ Port
Port 2 flow
2 flow ─Port
Port3 3flow
flow

(for bodies style and sizes see section “Accessories”)

ORDERING INFORMATION

DG-TCB – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” BSP Ports
S #6 SAE Ports

PRESSURE SETTINGS
014 14 bar (200 PSI)
020 20 bar (285 PSI)
032 32 bar (460 PSI)

Differential Pressure Across

External Controlling Orifice

without independent study, evaluation, and testing for suitability.

Page MP67
MECHANICAL PRESSURE CONTROLS

PP-PCC FIXED PRESSURE COMPENSATING REGULATOR VALVE - RESTRICTIVE TYPE

DESCRIPTION
8 size, 3/4-16 thread, “Power” series, pressure compensating regulator valve (restrictive type).

OPERATION
The PP-PCC-00 with an external orifice beyond port (3) and sensed by port (1) maintains a constant flow rate
from (3) regardless of load pressure changes in the system downstream of (3), or in the inlet at (2) as long
as pressure at (3) is above (1) by more then spring setting chosen and pump supply is in excess of demand.
The valve’s spool maintains a constant differential pressure across an external orifice, thereby regulating the
hydraulic flow rate across this external orifice (see options table for pressure ranges). When used with an orifice
as described above, it functions as a restrictive type regulator, delivering pump flow through the external orifice.
All ports may be fully pressurized.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Can be used as a logic element. Fixed setting pressure

reducing valve. For adjustable setting see PP-PCD.
PP-PCC-00-0100 is recommended for regulated flows
up to 4.0 GPM only. PP-PCC-00-0220 is recommended
for regulated flows up to 8.0 GPM. For fixed pressure
reducing/relieving valve see PP-PCP.

Regulated Flow vs Inlet Pressure

Inlet Pressure (bar)
PERFORMANCE VALVE SPECIFICATIONS
0 34 68 102 136 170 204
Actual9 Test Data (Cartridge Only) 32
Nominal Flow 8 GPM (30 LPM)
8
Rated Operating Pressure 3000 PSI (207 bar)
Regulated Flow (GPM)

Regulated Flow (LPM)

28
7
6 24 Ratio Area of Pilot is equal to the area
Regulated Flow vs Inlet Pressure 20
5 at Port (3)
4 Inlet Pressure (bar) 16
3 12 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 34 68 102 136 170 204
2 8
91 Filtration ISO 18/16/13
4 32
80 0 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Regulated Flow (GPM)

Regulated Flow (LPM)

28
7 0 500 1000 1500 2000 2500 3000 Weight .25 lbs (.11 kg)
6 24
5
Inlet Pressure (PSI) 20 Operating Fluid Media General Purpose Hydraulic Fluid
4 2 GPM 4 GPM 6 GPM 8 GPM 16 Cartridge Torque Requirements 25 ft-lbs (34 Nm)
3 12
Cavity POWER 3W
2 8
1 4 Cavity Form Tool (Finishing) 40500024
0 0 Seal Kit 21191111
0 500 1000 1500 2000 2500 3000
Inlet Pressure (PSI)
2 GPM 4 GPM 6 GPM 8 GPM

without independent study, evaluation, and testing for suitability.

Page MP68
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .56 lbs (.25 kg)

ORDERING INFORMATION

PP-PCC – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #6 SAE Ports
*Urethane, Standard U0
Buna, Screen A0
Viton, Screen W0
Urethane, Screen Y0

Δ P SETTING
*Urethane seals are recommended 0100 100 PSI
when inlet pressures exceed 1500 PSI 0220 220 PSI

without independent study, evaluation, and testing for suitability.

Page MP69
MECHANICAL PRESSURE CONTROLS

DF-CP2 PRESSURE COMPENSATING/REDUCING VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 2 ways pressure compensating/reducing valve.

OPERATION
The DF-CP2 allows pressure compensated flow from (2) to (3) regulated by the pressure present at (1). Pressure
differential between (3) and (1) is fixed at 8/14/18 bar (according to the pressure settings). These are minimum
values, increasing with the flow because of the pressure drop through the valve (see graph).When used with (1)
connected to a drain line, it works as pressure reducing valve.

FEATURES
• Hardened parts for long life.
• Industry common cavity.
• Spring range 8 to 18 bar. Pressure compensator for 2 way flow control,
typically used with an external orifice inline with
port (3). Port (1) should sense upstream pressure
of orifice.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 8 GPM (30 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Typical Internal Leakage
(150 SSU) 35 ml/min @ 250 bar
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -25° to +95°C
Weight .35 lbs (.16 kg)
PERFORMANCE Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 33 ft-lbs (45 Nm)
Actual Test Data (Cartridge Only) Cavity DELTA 3W
Cavity Tools Kit
(form tool, reamer, tap) 40500001
Seal Kit 210902025

Pressure Drop (bar) vs. Flow (lt/min) DF-CP2 008 - Flow (lt/min) vs. inlet pressure (bar)
For various pressure compensator settings (bar) For various orifice diameters (mm)
Control orifice Dia (mm)
Pressure drop (bar)

Flow (lt/min)

Flow @ Port 3 (lt/min)

Inlet pressure (bar)

without independent study, evaluation, and testing for suitability.

Page MP70
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

DF-CP2 014 - Flow (lt/min) vs. inlet pressure (bar)

For various orifice diameters (mm)

Control orifice Dia (mm)

Flow (lt/min)

Inlet pressure (bar)

DF-CP2 018 - Flow (lt/min) vs. inlet pressure (bar)

For various orifice diameters (mm)
Control orifice Dia (mm)
Flow (lt/min)

Inlet pressure (bar) (for bodies style and sizes see section “Accessories”)

ORDERING INFORMATION

DF-CP2 – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” BSP Ports
S #6 SAE Ports

PRESSURE SETTINGS
008 8 bar (115 PSI)
014 14 bar (200 PSI)
018 18 bar (260 PSI)

Differential Pressure Across

External Controlling Orifice

without independent study, evaluation, and testing for suitability.

Page MP71
MECHANICAL PRESSURE CONTROLS

QC-CP2 PRESSURE COMPENSATING/REDUCING VALVE

DESCRIPTION
Special cavity, 2 ways pressure compensating/reducing valve.

OPERATION
The QC-CP2 allows pressure compensated flow from (2) to (3) regulated by the pressure present at (1).
Pressure differential between (3) and (1) is fixed at 8/14/18/24 bar (according to the pressure settings). These
are minimum values, increasing with the flow because of the pressure drop through the valve (see graph). When
used with (1) connected to a drain line, it works as a fix setting pressure reducing valve.

FEATURES
• Hardened parts for long life.
• Spring range 8 to 24 bar.
Pressure compensator for 2 way flow control,
typically used with an external orifice inline with
port (3). Port (1) should sense upstream pressure
of orifice.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 19 GPM (70 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Typical Internal Leakage
(150 SSU) 35 ml/min @ 250 bar
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .35 lbs (.16 kg)
PERFORMANCE Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 52 ft-lbs (70 Nm)
Actual Test Data (Cartridge Only) Cavity T031 (Special)
Cavity Tools Kit
(form tool, reamer, tap) K-T031
Seal Kit 210902012

Flow (lt/min) vs. inlet pressure (bar)

Pressure drop (bar) vs. flow (lt/min) For various press. compensator valve settings - Re: control orifice diameter: 5.5 mm
Pressure drop (bar)

Flow (lt/min)
Port 2 to 3

Flow @ Port 3 (lt/min)

Inlet pressure (bar)

without independent study, evaluation, and testing for suitability.

Page MP72
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

(for bodies style and sizes see section “Accessories”)

ORDERING INFORMATION

QC-CP2 – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/2” BSP Ports
S #8 SAE Ports

PRESSURE SETTINGS
008 8 bar (115 PSI)
014 14 bar (200 PSI)
018 18 bar (260 PSI)
024 24 bar (340 PSI)

Differential Pressure Across

External Controlling Orifice

without independent study, evaluation, and testing for suitability.

Page MP73
MECHANICAL PRESSURE CONTROLS

TR-PCC PRESSURE COMPENSATING REGULATOR VALVE – RESTRICTIVE TYPE

DESCRIPTION
12 size, 1 1/16-12 thread, “Tecnord” series, pressure compensating regulator valve (restrictive type).

OPERATION
The TR-PCC with an external orifice beyond port (3) and sensed by port (1) maintains a constant flow rate from
(3) regardless of load pressure changes in the system downstream of (3), or in the inlet at (2) as long as pressure
at (3) is greater than (1) by more than spring setting chosen and pump supply is in excess of demand. The valve’s
spool maintains a constant differential pressure across an external orifice, thereby regulating the hydraulic flow
rate across this external orifice (see table for pressure ranges). When used with an orifice as described above,
it functions as a restrictive type regulator, delivering pump flow through the external orifice. All ports may be fully
pressurized.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Can be used as a logic element. Fixed setting pressure

reducing valve. For adjustable setting see TR-PCD.

Regulated Flow vs Load Pressure at Port 1

Load Pressure at Port 1 (BAR)

0 34 68 102 136 170 204

20 75

PERFORMANCE VALVE SPECIFICATIONS

Regulated Flow (GPM)

Regulated Flow (LPM)

16
Actual Test Data (Cartridge Only) 50 Nominal Flow 20 GPM (76 LPM)
12
Rated Operating Pressure 3500 PSI (241 bar)
Regulated Flow vs Load Pressure at Port 1
8 Seat Ratio Area of Pilot is equal to the area
Load Pressure at Port 1 (BAR) 25 at Port (3)
0 4 34 68 102 136 170 204 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
20 75 Filtration ISO 18/16/13
0 0
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Regulated Flow (GPM)

Regulated Flow (LPM)

16 0 500 1000 1500 2000 2500 3000

Weight .54 lbs (.24 kg)
Load Pressure at Port 1 (PSI) 50 Operating Fluid Media General Purpose Hydraulic Fluid
12
10gpm 14gpm 5 gpm Cartridge Torque Requirements 70 ft-lbs (95 Nm)
8 Cavity TECNORD 3WS
25
Cavity Form Tool (Finishing) 40500033
4
Seal Kit 21191306
0 0
0 500 1000 1500 2000 2500 3000

Load Pressure at Port 1 (PSI)

10gpm 14gpm 5 gpm

without independent study, evaluation, and testing for suitability.

Page MP74
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: 1.56 lbs (.70 kg)

ORDERING INFORMATION

TR-PCC – – –

OPTIONS BODIES
Buna 0P Blank Without Body
Viton VP S #10 SAE Ports

Δ P SETTING
@ 1 GPM with Pilot Vented
0080 80 PSI
0150 150 PSI

without independent study, evaluation, and testing for suitability.

Page MP75
MECHANICAL PRESSURE CONTROLS

DF-PCE ADJUSTABLE PRESSURE COMPENSATING VALVE, BYPASS TYPE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, spring adjustable pressure compensating valve, bypass type.

OPERATION
The DF-PCE with an external orifice in parallel with ports (3) and (1) maintains a constant flow rate across the
external orifice, regardless of load pressure changes in the system upstream of (3), or in the bypass leg at (2)
as long as pressure at (2) is greater than (1). The valve’s spool maintains a constant differential pressure across
an external orifice, thereby regulating the hydraulic flow rate across this external orifice (see table for pressure
ranges). When used with an orifice as described above, it functions as a bypass type regulator, delivering pump
flow through the external orifice.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Can be used as an adjustable logic element. Great

HYDRAULIC SYMBOL as an adjustable pressure setting regulation device
in brake, transmission & cooling systems, because
the spring chamber is separately drained, the
outlet can be used for lower pressure functions. For
fixed version see DF-PCR-0P. For higher spring
differential pressure ranges consult factory.

300 PSI setting /Regulated Flow vs Inlet Pressure

Inlet Pressure (bar)

PERFORMANCE
0 50 100 150 200
VALVE SPECIFICATIONS
10
Actual Test Data (Cartridge Only) 35 Nominal Flow 10 GPM (38 LPM)
Regulated Flow (GPM)

Regulated Flow (LPM)

8 30 Rated Operating Pressure 3500 PSI (241 bar)

25
6
300 PSI setting /Regulated Flow vs Inlet Pressure
20
Seat Ratio Area of Pilot is equal to the area
4 15 at Port (3)
Inlet Pressure (bar) 10 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
2
0 50 100 150 5 200
0 0 Filtration ISO 18/16/13
10
0 500 1000 1500 2000 2500 3000 35 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Regulated Flow (GPM)

Regulated Flow (LPM)

8 Inlet Pressure (PSI) 30 Weight .52 lbs (.23 kg)

4 gpm 6 gpm 8 gpm 2 gpm 25 Operating Fluid Media General Purpose Hydraulic Fluid
6
20
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
4 15
Cavity DELTA 3W
10
2 Cavity Form Tool (Finishing) 40500001
5
0 0 Seal Kit 21191210
0 500 1000 1500 2000 2500 3000
Inlet Pressure (PSI)
4 gpm 6 gpm 8 gpm 2 gpm

without independent study, evaluation, and testing for suitability.

Page MP76
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-PCE – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI
Buna, Tamper Proof 0T
Viton, Tamper Proof VT PRESSURE RANGE
0300 100 - 300 PSI

Differential Pressure Across

External Controlling Orifice

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0200 - 200 PSI

without independent study, evaluation, and testing for suitability.

Page MP77
MECHANICAL PRESSURE CONTROLS

SL-PCE ADJUSTABLE PRESSURE COMPENSATING REGULATOR VALVE

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, pressure compensating regulator valve.

OPERATION
The SL-PCE with an external orifice in parallel with ports (3) and (1) maintains a constant flow rate across
the external orifice, regardless of load pressure changes in the system upstream of (3), or in the bypass leg
at (2) as long as pressure at (2) is less than (1). The valve’s spool maintains a constant differential pressure
across the external orifice, thereby regulating the hydraulic flow rate across the external orifice (see options
table for pressure ranges). When used with an orifice as described above, it functions as a priority type regulator,
delivering pump flow first to the external orifice, then bypassing excess to (2). All ports may be fully pressurized.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Can be used as an adjustable logic element. Great

HYDRAULIC SYMBOL as an adjustable pressure setting regulation device
in brake, transmission & cooling systems. Because
the spring chamber is separately drained, the outlet
flow can be used for lower pressure functions. For
fixed version see SL-PCA-0P. For higher spring
differential pressure ranges consult factory.

Flow (LPM)
PERFORMANCE
0 10 20 30 40 50 60 70 80 90 100 110 VALVE SPECIFICATIONS
350 24
Actual300
Test Data (Cartridge Only) 21 Nominal Flow 40 GPM (151 LPM)
18 Rated Operating Pressure 3500 PSI (241 bar)
Pressure Drop (PSI)

250
Pressure drop (bar)

Flow (LPM)
15 Seat Ratio Area of Pilot is equal to the area
200 0 10 20 30 40 50 60 70 80 90 100 110
350 12 24 at Port (3)
150
9 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
300 21
100
6
18 Filtration ISO 18/16/13
Pressure Drop (PSI)

250
Pressure drop (bar)

50 3
15 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
200
0 0
0 5 10 15 20 25 30 12 Weight 1.15 lbs (.52 kg)
150
Flow (GPM) 9 Operating Fluid Media General Purpose Hydraulic Fluid
100 Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Port 3 to 2 Port 3 to 2 Port 3 to 2 6
50 3 Cavity SUPER 3WS
0 0 Cavity Form Tool (Finishing) 40500021
0 5 10 15 20 25 30 Seal Kit 21191406
Flow (GPM)
Port 3 to 2 Port 3 to 2 Port 3 to 2

without independent study, evaluation, and testing for suitability.

Page MP78
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: 1.89 lbs (.86 kg)

ORDERING INFORMATION

SL-PCE – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports
Buna, Knob 0K
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI
Buna, Tamper Proof 0T
Viton, Tamper Proof VT PRESSURE RANGE/SETTING
0300 50 - 300 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0200 - 200 PSI

without independent study, evaluation, and testing for suitability.

Page MP79
MECHANICAL PRESSURE CONTROLS

DF-PCS PRESSURE COMPENSATING VALVE, RESTRICTIVE TYPE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pressure compensating valve, restrictive type.

OPERATION
The DF-PCS allows pressure compensated flow from (1) to (2) regulated by the pressure present at (3). The
spring chamber is constantly vented at (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Pressure compensator for flow control, typically used

HYDRAULIC SYMBOL
with an external orifice inline with port (1). Port (3)
should sense upstream pressure of orifice.

Pressure @ Port 2 (bar)

0 50 100 150 200
10
35
8 30
PERFORMANCE VALVE SPECIFICATIONS
25
Flow (GPM)

Flow (LPM)

6
Actual Test Data (Cartridge Only) 20 Nominal Flow 10 GPM (38 LPM)
4 15 Rated Operating Pressure 3500 PSI (241 bar)
Pressure @ Port 2 (bar) 10 Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min) per path
2 0 50 100 150 200
5 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
10
0 0 35 Filtration ISO 18/16/13
0 500 1000 1500 2000 2500 3000 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
8 30
Pressure @ Port 2 (PSI)
25 Weight .35 lbs (.16 kg)
Flow (GPM)

Flow (LPM)

6 .110" dia. orifice .156" dia. orifice

20 Operating Fluid Media General Purpose Hydraulic Fluid
4 15
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
10
Cavity DELTA 3W
2 Cavity Form Tool (Finishing) 40500001
5
Seal Kit 21191210
0 0
0 500 1000 1500 2000 2500 3000
Pressure @ Port 2 (PSI)

.110" dia. orifice .156" dia. orifice

without independent study, evaluation, and testing for suitability.

Page MP80
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-PCS – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

PRESSURE DIFFERENTIAL
0150 150 PSI
0450 450 PSI

Differential Pressure Across

External Controlling Orifice

without independent study, evaluation, and testing for suitability.

Page MP81
MECHANICAL PRESSURE CONTROLS

DF-TCS PRESSURE COMPENSATING VALVE, RESTRICTIVE TYPE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pressure compensating valve, restrictive type.

OPERATION
The DF-TCS allows pressure compensated flow from (1) to (2) regulated the pressure present at (3). Pressure
differential between (1) and (3) is fixed at 8/24 bar (according to the pressure settings). These are minimum
values increasing with the flow because of the pressure drop through the valve (see graph).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

Pressure compensator for 2 way flow control,

typically used with an external orifice inline with
port (3). Port (1) should sense upstream pressure
of orifice.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 10 GPM (38 LPM)
2
Rated Operating Pressure 3500 PSI (241 bar)
Typical Internal Leakage
3 (150 SSU) 35 ml/min @ 250 bar
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
1 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .35 lbs (.16 kg)
PERFORMANCE Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 33 ft-lbs (45 Nm)
Actual Test Data (Cartridge Only) Cavity DELTA 3W
Cavity Tools Kit
(form tool, reamer, tap) 40500001
Seal Kit 210902026

Pressure Drop (bar) vs. Flow (lt/min) DF-TCS 008 - Flow (lt/min) vs. inlet pressure (bar)
For various pressure compensator settings (bar) For various orifice diameters (mm)
Control orifice Dia (mm)
Pressure drop (bar)

Flow (lt/min)

Flow from Port 1 to 2 (lt/min) Inlet pressure (bar)

without independent study, evaluation, and testing for suitability.

Page MP82
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

DF-TCS 024 - Flow (lt/min) vs. inlet pressure (bar)

For various orifice diameters (mm)

Control orifice Dia (mm)

Flow (lt/min)

Inlet pressure (bar)

(for bodies style and sizes see section “Accessories”)

ORDERING INFORMATION

DF-TCS – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” BSP Ports
S #6 SAE Ports

PRESSURE SETTINGS
008 8 bar (115 PSI)
024 24 bar (340 PSI)

Differential Pressure Across

External Controlling Orifice

without independent study, evaluation, and testing for suitability.

Page MP83
MECHANICAL PRESSURE CONTROLS

DF-PCT ADJUSTABLE PRESSURE COMPENSATING VALVE, RESTRICTIVE TYPE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pressure compensating valve, restrictive type.

OPERATION
The DF-PCT with an external orifice in front of port (1) allows pressure compensated flow from (1) to (2), regulated
by the pressure present at (3). The spring chamber is constantly vented at (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Can be used as an adjustable logic element. For
fixed version see DF-PCS. For higher spring
differential pressure ranges consult factory.

300 PSI setting, Regulated Flow vs Inlet Pressure

Inlet Pressure (bar)
0 34 68 102 136 170 204
9
32
8
Regulated Flow (GPM)

Regulated Flow (LPM)

28
PERFORMANCE 7
24
VALVE SPECIFICATIONS
6
5 20
Actual Test Data (Cartridge Only) 4 16 Nominal Flow 10 GPM (38 LPM)
3 12
2 8 Rated Operating Pressure 3500 PSI (241 bar)
4
1
300 PSI setting, Regulated Flow vs Inlet Pressure Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min) per path
0 0
0 500 1000 Inlet
1500Pressure
2000 (bar)
2500 3000 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Inlet Pressure (PSI)
0 34 68 102 136 170 204 Filtration ISO 18/16/13
4 GPM 8 GPM
9 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
32
8
Regulated Flow (GPM)

Regulated Flow (LPM)

28 Weight .60 lbs (.27 kg)

7
6 24
Operating Fluid Media General Purpose Hydraulic Fluid
5 20
4 16 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
3 12 Cavity DELTA 3W
2 8
4
Cavity Form Tool (Finishing) 40500001
1
0 0 Seal Kit 21191210
0 500 1000 1500 2000 2500 3000
Inlet Pressure (PSI)
4 GPM 8 GPM

without independent study, evaluation, and testing for suitability.

Page MP84
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-PCT – – –

Differential Pressure Across

External Controlling Orifice

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0200 - 200 PSI

without independent study, evaluation, and testing for suitability.

Page MP85
MECHANICAL PRESSURE CONTROLS

without independent study, evaluation, and testing for suitability.

Page MP86
MECHANICAL PRESSURE CONTROLS

PRESSURE REDUCING/RELIEVING VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

10 3000 38 207 7/8-14 DF-PRP MP88

20 3000 76 207 1 5/16-12 SK-PRP MP90

10 4000 38 276 7/8-14 DF-PWP MP92

TYPICAL SCHEMATIC

Typical application for the PRP and PWP is multi-system pressure setting. System relief pressure must be greater then reduce pressure setting.

without independent study, evaluation, and testing for suitability.

Page MP87
MECHANICAL PRESSURE CONTROLS

DF-PRP PILOT OPERATED, PRESSURE REDUCING, RELIEVING VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pilot operated, pressure reducing, relieving valve.

OPERATION
The DF-PRP in its steady state, allows flow to pass from (2) to (3), with the spring chamber constantly drained
at (1). When a pre-determined pressure is reached at (3), the spool shifts to restrict input flow at (2), thereby
reducing (restricting) flow. If valve and pressure at port (3) exceeds setting, spool shift to open passage at port
(1), thereby regulating pressure at port (3) by relieving excess flow. The cartridge offers smooth transition in
response to load changes in common hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 10 GPM (38 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .59 lbs (.27 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Cavity DELTA 3W
PERFORMANCE Cavity Form Tool (Finishing) 40500001
Actual Test Data (Cartridge Only) Seal Kit 21191206

Flow (LPM) Flow (LPM)

0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
2500 Flow (LPM) 2500 Flow (LPM)
0 5 10 15 20 25 30 35 150 0 5 10 15 20 25 30 150
35
Regulated Pressure (PSI)

Regulated Pressure (bar)

2000
2500 2000
2500
Pressure Drop (PSI)

Pressure Drop (bar)

150 1500 150

Regulated Pressure (PSI)

1500

Regulated Pressure (bar)

2000 100 2000 100
Pressure Drop (PSI)

Pressure Drop (bar)

1000 1000
1500 1500 100
100 50
50
500
500 1000
1000
0 0 50
0 0 50
5000 0500 2 4 6 8 10
2 4 6 8 10
Flow (GPM) 0 Flow (GPM) 0
0 0
Port 2 to 3 Port 3 to 1 0 2 2 to 3
Port 4 Port 2 to 3 6 8 10
0 2 4 6 8 10
Flow (GPM) Flow (GPM)

Port 2 to 3 Port 3 to 1 Port 2 to 3 Port 2 to 3

without independent study, evaluation, and testing for suitability.

Page MP88
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-PRP – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK

PRESSURE RANGE
3000 100 - 3000 PSI

without independent study, evaluation, and testing for suitability.

Page MP89
MECHANICAL PRESSURE CONTROLS

SK-PRP PILOT OPERATED PRESSURE REDUCING, RELIEVING VALVE

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, pilot operated pressure reducing, relieving valve.

OPERATION
The SK-PRP in its steady state, allows flow to pass from (2) to (3), with the spring chamber constantly drained
at (1). When a pre-determined pressure is reached at (3), the spool shifts to restrict input flow at (2), thereby
reducing (restricting) flow. If the valve and pressure at port (3) exceeds setting, spool shifts to open passage
at port (1), thereby regulating pressure at (3) by relieving excess flow. The cartridge offers smooth transition in
response to load changes in common hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 20
Flow (LPM) GPM (76 LPM)
Rated Operating
0 Pressure 25 500-3000
50 PSI (34-207 75
bar)
2500
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13 150
2000
Pressure Drop (PSI)

Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

Pressure Drop (bar)

Flow (LPM)
0 25 50 75
Weight 1500
1.28 lbs (.58 kg) 100
2500 Operating Fluid Media General Purpose Hydraulic Fluid
150 1000
2000 Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Pressure Drop (PSI)

50
Pressure Drop (bar)

1500
Cavity 500 SUPER 3W
PERFORMANCE 100
Cavity Form Tool (Finishing) 40500018
1000
Actual Test Data (Cartridge Only) 50
Seal Kit 0 21191406 0
500 0 5 10 15 20
Flow (GPM)
0 0
Port 2 to 3 Port 2 to 3
0 5 10 15 20
Flow (GPM)
Flow (LPM)
Port 2 to 3 Port 2 to 3 Flow (LPM)
0 25 50 75 0 25 50 75
2500 Flow (LPM)
0 25 50 75 1500 100
1500 100
150
2000
Pressure Drop (PSI)

Pressure Drop (bar)

Pressure Drop (PSI)

Pressure Drop (bar)

Pressure Drop (PSI)

Pressure Drop (bar)

1000
1500
1000
100
50
50
1000
500
50 500
500
0 0
0 5 10 15 20
0 Flow (GPM) 0 0 0
0 5 10 15 20 0 5 10 15 20
Port 2 to 3 Port 3 to 1 (valve set @ 1000 PSI)
Flow (GPM)
Flow (GPM)
Port 2 to 3 Port 2 to 3
Port 2 to 3 Port 3 to 1 (valve set @ 1000 PSI)
Flow (LPM)
0 25 50 75
1500 100
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
W 19 / 2020

without independent study, evaluation, and testing for suitability.

Pressure Drop (PSI)

Pressure Drop (bar)

1000

50
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526 Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
500
mail: [email protected] • www.delta-power.com mail: [email protected] • www.tecnord.com

Page MP90
0 0
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: 2.46 lbs (1.11 kg)

ORDERING INFORMATION

SK-PRP – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 S #12 SAE Ports
Buna, Knob 0K
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI PRESSURE RANGE/SETTING
Buna, Tamper Proof 0T Ext./Int. Adjustable
Viton, Tamper Proof VT 3000 500 - 3000 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP91
MECHANICAL PRESSURE CONTROLS

DF-PWP PILOT OPERATED PRESSURE REDUCING, RELIEVING VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pilot operated pressure reducing, relieving valve.

OPERATION
The DF-PWP in its steady state, allows flow to pass from (2) to (3), with the spring chamber constantly drained
at (1). When a pre-determined pressure is reached at (3), the spool shifts to restrict input flow at (2), thereby
reducing (restricting) flow. If valve and pressure at port (3) exceeds setting, spool shifts to open passage at port
(1), thereby regulating pressure at port (3) by relieving excess flow. The cartridge offers smooth transition in
response to load changes in common hydraulic circuits.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL VALVE SPECIFICATIONS

Nominal Flow 10 GPM (38 LPM)
Rated Operating Pressure 4000 PSI (276 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .57 lbs (.26 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Cavity DELTA 3W
PERFORMANCE Cavity Form Tool (Finishing) 40500001
Actual Test Data (Cartridge Only) Seal Kit 21191206
Flow (LPM) Flow (LPM)
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
2500 Flow (LPM) 2500 Flow (LPM)
0 5 10 15 20 25 30 35 150 0 5 10 15 20 25 30 35
150
Regulated Pressure (PSI)

Regulated Pressure (bar)

2000
2500 2000 2500
Pressure Drop (PSI)

Pressure Drop (bar)

150 150
Regulated Pressure (PSI)

Regulated Pressure (bar)

1500 100 1500 2000 100
2000
Pressure Drop (PSI)

Pressure Drop (bar)

1000 1000
1500 100 1500 100
50 50
500 500
1000 1000
50 0 0 50
0 0 500
500 0 2 4 6 8 10
0 2 4 6 8 10
Flow (GPM) Flow (GPM)
0 0
0 0
Port 2 to 3 Port 3 to 1 0 Port
2 2 to 3 4 Port 2 to 3 6 8 10
0 2 4 6 8 10
Flow (GPM) Flow (GPM)
Port 2 to 3 Port 3 to 1 Port 2 to 3 Port 2 to 3

without independent study, evaluation, and testing for suitability.

Page MP92
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-PWP – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
Buna, Knob 0K S #6 SAE Ports
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI PRESSURE RANGE/SETTING
Buna, Tamper Proof 0T Ext./Int. Adjustable
Viton, Tamper Proof VT 4000 100 - 4000 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP93
MECHANICAL PRESSURE CONTROLS

without independent study, evaluation, and testing for suitability.

Page MP94
MECHANICAL PRESSURE CONTROLS

SEQUENCE VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

10 3000 38 207 7/8-14 DG-PSA MP96

10 3000 38 207 7/8-14 DG-PSC MP98

10 3000 38 207 7/8-14 DG-PSI MP100

10 3000 38 207 7/8-14 DG-PSO MP102

12 3000 45 207 7/8-14 DG-PSS MP104

10 3000 38 207 7/8-14 DG-PTC MP106

10 3000 38 207 7/8-14 DG-PTO MP108

10 3000 38 207 7/8-14 DF-PWE MP110

8 3000 30 207 7/8-14 DF-PWI MP112

40 3500 151 241 1 5/16-12 SL-PWA MP114

40 3500 151 241 1 5/16-12 SL-PWB MP116

TYPICAL SCHEMATIC

Typical application for the PSO or PSC sequence valve is for a high/low application like a log splitter where the spring chamber can be vented
externally (spring chamber pressure directly adds to the pilot pressure required to shift the valve). Typical application for the PWI sequence valve
is for controlling the lip on a dock leveler. Typical application for the PWE sequence valve is for a high/low pump in a positive traction circuit where
the valve automatically shifts to low speed high torque mode. Typical application for the PSI sequence valve is when starting against load where the
spring chamber can be vented externally (spring chamber pressure directly adds to the pilot pressure required to shift the valve). Typical application
for the PSA sequence valve is a hydraulic brake release of a spring loaded single acting cylinder. Typical application for the PSS hot oil shuttle is
to divert fluid from the low pressure side of a closed loop hydrostatic transmission for cooling or filtering.

without independent study, evaluation, and testing for suitability.

Page MP95
MECHANICAL PRESSURE CONTROLS

DG-PSA SEQUENCE VALVE, 4 WAY NORMALLY CLOSED, EXTERNAL PILOT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 4 way external pilot sequence valve.

OPERATION
The DG-PSA in neutral (un-piloted), allows flow between (1) and (2) bidirectionally, while blocking at (3). The
spring chamber is constantly vented at (1). On attainment of a predetermined pressure at (4), the cartridge shifts
to close (1) to (2), while opening (2) to (3). Note that the backpressure value at (1) must be added to the selected
pressure setting to determine pilot pressure necessary to open valve.

FEATURES
• Optional spring ranges to 1500 PSI (103 bar).
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Orifice .030 to .060 diameter recommended
beneath port (4).

Flow (LPM)
0 10 20 30 40
200
Pressure Drop (BAR)
Pressure Drop (PSI)

150 10
PERFORMANCE VALVE SPECIFICATIONS
100
Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
5
Rated Operating Pressure 3000 PSI (207 bar)
50 Flow (LPM)
0 10 20 30 40
Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
200
0 0 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 2 4 6 8 10 12 Filtration ISO 18/16/13
Pressure Drop (BAR)

Flow (GPM)
Pressure Drop (PSI)

150 10 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)

Port 2 to 3 Port 2 to 1
Weight .63 lbs (.28 kg)
100 Operating Fluid Media General Purpose Hydraulic Fluid
5 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
50
Cavity DELTA 4W
Cavity Form Tool (Finishing) 40500002
0 0
0 2 4 6 8 10 12
Seal Kit 21191214
Flow (GPM)

Port 2 to 3 Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MP96
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-PSA – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP97
MECHANICAL PRESSURE CONTROLS

DG-PSC SEQUENCE VALVE, 2 WAY NORMALLY CLOSED, EXTERNAL PILOT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 2 way normally closed sequence valve, external pilot.

OPERATION
The DG-PSC in neutral (unpiloted), blocks flow between (3) and (2). The spring chamber is constantly vented at
(1). On attainment of a predetermined pressure at (4), the cartridge shifts to allow flow from (3) to (2). Note that
the backpressure value at (1) must be added to the selected pressure setting to determine pilot pressure.

FEATURES
• Optional spring ranges to 1500 PSI (103 bar).
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Orifice .030 to .060 diameter recommended
beneath port (4).

Flow (LPM)
0 10 20 30 40
200
Pressure Drop (PSI)

150
Pressure Drop (bar)

10
PERFORMANCE VALVE SPECIFICATIONS

Actual
100Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LPM)
5 Rated Operating Pressure 3000 PSI (207 bar)
50 Flow (LPM)
Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
0 10 20 30 40
200 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 0
0 2 4 6 8 10 12 Filtration ISO 18/16/13
Flow (GPM) Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

150
Pressure Drop (bar)

10
Port 2 to 3 Weight .63 lbs (.28 kg)
100 Operating Fluid Media General Purpose Hydraulic Fluid
5 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
50 Cavity DELTA 4W
Cavity Form Tool (Finishing) 40500002
0 0 Seal Kit 21191214
0 2 4 6 8 10 12
Flow (GPM)

Port 2 to 3

without independent study, evaluation, and testing for suitability.

Page MP98
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-PSC – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP99
MECHANICAL PRESSURE CONTROLS

DG-PSI SEQUENCE VALVE, 3 WAY NORMALLY OPEN, INTERNAL PILOT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 3 way normally open internal pilot sequence valve.

OPERATION
The DG-PSI in neutral (un-piloted), allows flow between (3) and (2) bidirectional, while blocking at (4). The spring
chamber is constantly vented at (1). On attainment of a predetermined pressure at (4), the cartridge shifts to close
(3) to (2), while opening (4) to (3).
Note: that the backpressure value at (1) must be added to the selected pressure setting to determine pilot
pressure necessary to open valve.

FEATURES
• Optional spring ranges to 1500 PSI (103 bar).
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 5 10 15 20 25 30 35 40 45
2000
Pressure Drop (PSI)

Pressure Drop (bar)

1500 100
PERFORMANCE VALVE SPECIFICATIONS
1000
Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LTR/M)
50
Flow (LPM) Rated Operating Pressure 3000 PSI (207 bar)
500
0 5 10 15 20 25 30 35 40 45 Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
2000 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 0
0 2 4 6 8 10 12 Filtration ISO 18/16/13
Pressure Drop (PSI)

Pressure Drop (bar)

1500 Flow (GPM) 100 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Port 4 to 3 Port 2 to 3 Weight .63 lbs (.28 kg)
1000 Operating Fluid Media General Purpose Hydraulic Fluid
50 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
500 Cavity DELTA 4W
Cavity Form Tool (Finishing) 40500002
0 0 Seal Kit 21191214
0 2 4 6 8 10 12
Flow (GPM)

Port 4 to 3 Port 2 to 3

without independent study, evaluation, and testing for suitability.

Page MP100
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-PSI – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP101
MECHANICAL PRESSURE CONTROLS

DG-PSO SEQUENCE VALVE, 2 WAY NORMALLY OPEN, EXTERNAL PILOT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, 2 way normally open sequence valve, external pilot.

OPERATION
The DG-PSO in neutral (un-piloted), allows flow between (3) and (2) bi-directionally. The spring chamber is
constantly vented at (1). On attainment of a predetermined pressure at (4), the cartridge shifts to block flow from
(3) to (2).
Note: that the backpressure value at (1) must be added to the selected pressure setting to determine pilot
pressure necessary to close valve.

FEATURES
• Optional spring ranges to 1500 PSI (103 bar).
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Orifice .030 to .060 diameter recommended
beneath port (4).

Flow (LPM)
0 10 20 30 40
150 10
125
Pressure Drop (PSI)

Pressure Drop (bar)

PERFORMANCE
100 VALVE SPECIFICATIONS

Actual75Test Data (Cartridge Only) 5 Nominal Flow 10 GPM (38 LTR/M)

50 Rated Operating Pressure 3000 PSI (207 bar)
Flow (LPM) Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
25 0 10 20 30 40
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
150
0 0 10 Filtration ISO 18/16/13
0 2 4 6 8 10 12
125 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

Flow (GPM)
100 Weight .62 lbs (.28 kg)
Port 2 to 3
Operating Fluid Media General Purpose Hydraulic Fluid
75 5
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
50 Cavity DELTA 4W
25 Cavity Form Tool (Finishing) 40500002
Seal Kit 21191214
0 0
0 2 4 6 8 10 12
Flow (GPM)

Port 2 to 3

without independent study, evaluation, and testing for suitability.

Page MP102
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-PSO – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP103
MECHANICAL PRESSURE CONTROLS

DG-PSS HOT OIL SHUTTLE VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, hot oil shuttle valve.

OPERATION
The DG-PSS, with internal piloting at port (1) or (3), oil will flow from the port opposite of the port piloted to port
(2), thus removing oil from the low-pressure side for cooling or filtration purposes. The Valve is spring bias neutral,
relying solely on the internal pilot pressure signal to shift to either side. The DG-PSS is closed in transition.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 10 20 30 40
200
Pressure Drop (PSI)

PERFORMANCE
150 VALVE SPECIFICATIONS
Pressure Drop (bar)

Actual Test Data (Cartridge Only) Nominal Flow 12 GPM (45 LTR/M)
100
Rated Operating Pressure 3000 PSI (207 bar)
5
Flow (LPM) Typical Internal Leakage (150 SSU) 5 cu/in per/min (82 ml/min)
50
0 10 20 30 40 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200
0 0
Filtration ISO 18/16/13
0 2 4 6 8 10 12 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

150 Flow (GPM) Weight .34 lbs (.15 kg)

Pressure Drop (bar)

10
Port 3 to 2 Port 1 to 2 Operating Fluid Media General Purpose Hydraulic Fluid
100 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
5 Cavity DELTA 4W
50 Cavity Form Tool (Finishing) 40500002
Seal Kit 21191212
0 0
0 2 4 6 8 10 12
Flow (GPM)

Port 3 to 2 Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP104
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-PSS – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

CRACK PRESSURE
0040 40 PSI
0080 80 PSI
0120 120 PSI
0160 160 PSI
0000 0 PSI (NO SPRING)

without independent study, evaluation, and testing for suitability.

Page MP105
MECHANICAL PRESSURE CONTROLS

DG-PTC SEQUENCE VALVE, NORMALLY OPEN, EXTERNAL PILOT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, external pilot, normally open.

OPERATION
The DG-PTC allows flow at ports (3) and (2). On attainment of a predetermined pressure at port (4), the valve
shifts to block flow from port (3) to (2). Spring Chamber is constantly vented to port (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Orifice .030 to .060 diameter recommended
beneath port (4).

Flow (LPM)
0 10 20 30 40 50
350

300 20
PERFORMANCE VALVE SPECIFICATIONS
Pressure Drop (PSI)

Pressure Drop (bar)

250
Actual Test Data (Cartridge Only) 15 Nominal Flow 10 GPM (38 LTR/M)
200
Rated Operating Pressure 3000 PSI (207 bar)
150 Flow (LPM) 10 Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
0 10 20 30 40 50 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
100
350 5 Filtration ISO 18/16/13
50
300 20 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
0 0
Weight .39 lbs (.17 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

250 0 2 4 6 8 10 12 14
15 Operating Fluid Media General Purpose Hydraulic Fluid
200 Flow (GPM)
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
150 10 Cavity DELTA 4W
100 Cavity Form Tool (Finishing) 40500002
5 Seal Kit 21191108
50

0 0
0 2 4 6 8 10 12 14
Flow (GPM)

without independent study, evaluation, and testing for suitability.

Page MP106
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-PTC – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

SPRING BIAS
0050 50 PSI
0180 180 PSI
±10%

without independent study, evaluation, and testing for suitability.

Page MP107
MECHANICAL PRESSURE CONTROLS

DG-PTO SEQUENCE VALVE, NORMALLY CLOSED, EXTERNAL PILOT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, external pilot, normally closed.

OPERATION
The DG-PTO blocks flow at ports (3) and (2). On attainment of a predetermined pressure at port (4), the valve
shifts to allow flow from port (3) to (2). Spring Chamber is constantly vented to port (1).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Orifice .030 to .060 diameter recommended
beneath port (4).

Flow (LPM)
0 10 20 30 40 50
350
PERFORMANCE VALVE SPECIFICATIONS
300 20
Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LTR/M)
Pressure Drop (PSI)

Pressure Drop (bar)

250
Rated Operating Pressure 3000 PSI (207 bar)
15
200 Flow (LPM) Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
150
0 10 20 30 40 50 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
10
350
100
Filtration ISO 18/16/13
300 5 20 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
50
Weight .39 lbs (.17 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

250
0 0 15 Operating Fluid Media General Purpose Hydraulic Fluid
200 0 2 4 6 8 10 12 14
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Flow (GPM)
150 10 Cavity DELTA 4W
100 Cavity Form Tool (Finishing) 40500002
5 Seal Kit 21191108
50

0 0
0 2 4 6 8 10 12 14
Flow (GPM)

without independent study, evaluation, and testing for suitability.

Page MP108
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .99 lbs (.45 kg)

ORDERING INFORMATION

DG-PTO – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4” NPTF Ports
S #6 SAE Ports

SPRING BIAS
0050 50 PSI
0180 180 PSI
±10%

without independent study, evaluation, and testing for suitability.

Page MP109
MECHANICAL PRESSURE CONTROLS

DF-PWE SEQUENCE VALVE, NORMALLY CLOSED, EXTERNAL PILOT

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, external pilot normally closed, sequence valve.

OPERATION
The DF-PWE blocks flow at ports (2) and (1). On attainment of a predetermined pressure at (3) the valve shifts
to a allow flow from (1) to (2).

FEATURES
• Hardened parts for long life.
• Optional spring ranges to 1500 PSI (103 bar).
• Industry common Cavity.

HYDRAULIC SYMBOL
Orifice .030 to .060 diameter recommended
beneath port (3).

Flow (LPM)
0
PERFORMANCE 5 10 15 20 25 30 35 40 45 50 VALVE SPECIFICATIONS
200
Actual Test Data (Cartridge Only) Nominal Flow 10 GPM (38 LTR/M)
Rated Operating Pressure 3000 PSI (207 bar)
Pressure Drop (PSI)

Pressure Drop (bar)

150 Flow (LPM) 10 Internal Leakage (150 SSU)

Typical 5 cu in/min (82 ml/min)
0 5 10 15 20 25 30 35 40 45 50 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
200 100 Filtration ISO 18/16/13
Media
5 Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

Pressure Drop (bar)

150 10
50 Weight .57 lbs (.26 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
100
0 Cartridge
0 Torque Requirements 30 ft-lbs (40.6 Nm)
5
0 2 4 6 8 10 12 Cavity
14 DELTA 3W
50
Cavity Form Tool (Finishing) 40500001
Flow (GPM)
0 0 Seal Kit 21191206
Port 1 to 2
0 2 4 6 8 10 12 14
Flow (GPM)
Port 1 to 2

without independent study, evaluation, and testing for suitability.

Page MP110
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-PWE – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP111
MECHANICAL PRESSURE CONTROLS

DF-PWI SEQUENCE VALVE, INTERNAL PILOT AND DRAIN

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, internal pilot and drain, sequence valve.

OPERATION
The DF-PWI blocks flow at (3) and allows flow from (2) to (1). On attainment of a predetermined pressure at (3)
the valve shifts to a allow flow from (3) to (2) and block flow at (1).

FEATURES
• Hardened parts for long life.
• Optional spring ranges to 1500 PSI (103 bar).
• Industry common Cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 10 20 30 40
2000

PERFORMANCE VALVE SPECIFICATIONS

Pressure Drop (PSI)

1500
Pressure Drop (bar)

100
Actual Test Data (Cartridge Only) Nominal Flow 8 GPM (30 LPM)
1000 Rated Operating Pressure 3000 PSI (207 bar)
Flow (LPM)
50 Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
0 10 20 30 40
500 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
2000
Filtration ISO 18/16/13
0 0 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Pressure Drop (PSI)

1500
Pressure Drop (bar)

0 2 4 6 8 10 12 100 Weight .57 lbs (.26 kg)

Flow (GPM) Operating Fluid Media General Purpose Hydraulic Fluid
1000 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
50 Cavity DELTA 3W
500 Cavity Form Tool (Finishing) 40500001
Seal Kit 21191206
0 0
0 2 4 6 8 10 12
Flow (GPM)

without independent study, evaluation, and testing for suitability.

Page MP112
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .76 lbs (.35 kg)

ORDERING INFORMATION

DF-PWI – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 - 500 PSI

without independent study, evaluation, and testing for suitability.

Page MP113
MECHANICAL PRESSURE CONTROLS

SL-PWA SEQUENCE VALVE, NORMALLY CLOSED, INTERNAL PILOT

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, internal pilot normally closed, sequence valve.

OPERATION
The SL-PWA blocks flow from ports (3) to (2). On attainment of a predetermined pressure at (3) the valve shifts
to allow flow from (3) to (2). Port (1) should be a tank line.

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 15 30 45 60 75 90
2000 135
PERFORMANCE 120 VALVE SPECIFICATIONS
Pressure Drop (bar)
Pressure Drop (PSI)

1500
Actual Test Data (Cartridge Only) 105 Nominal Flow 40 GPM (151 LPM)
90 Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) 75 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
1000
60 Filtration ISO 18/16/13
0 15 30 45 60 75 90
45 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
2000 500 13530
Weight 1.15 lbs (.52 kg)
12015
Operating Fluid Media General Purpose Hydraulic Fluid
Pressure Drop (bar)
Pressure Drop (PSI)

1500 0 1050
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
0 5 10 15 20 90
25
Cavity SUPER 3WS
Flow (GPM)
75
1000 Cavity Form Tool (Finishing) 40500021
60
Seal Kit 21191404
45
500 30
15
0 0
0 5 10 15 20 25
Flow (GPM)

without independent study, evaluation, and testing for suitability.

Page MP114
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: 1.89 lbs (.86 kg)

ORDERING INFORMATION

SL-PWA – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 2000 = 2000 PSI

without independent study, evaluation, and testing for suitability.

Page MP115
MECHANICAL PRESSURE CONTROLS

SL-PWB SEQUENCE VALVE, NORMALLY CLOSED, INTERNAL PILOT WITH REVERSE FREE FLOW

DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, internal pilot normally closed, sequence valve w/ reverse free flow.

OPERATION
The SL-PWB blocks flow from ports (3) to (2). On attainment of a predetermined pressure at (3) the valve shifts
to allow flow from (3) to (2). Port (1) should be a tank line. Reverse flow from (2) to (3) occurs when the pressure
at port (2) is at least 45 PSI (3.1 bar) higher than at port (3).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL

Flow (LPM)
0 15 30 45 60 75 90
2000 135
PERFORMANCE 120 VALVE SPECIFICATIONS
Pressure Drop (bar)
Pressure Drop (PSI)

1500
Actual Test Data (Cartridge Only) 105 Nominal Flow 40 GPM (151 LPM)
90 Rated Operating Pressure 3500 PSI (241 bar)
Flow (LPM) 75
1000 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
0 25 50 75 100 125 150 60 Filtration ISO 18/16/13
2500 45 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
500 150 30
Weight 1.15 lbs (.52 kg)
2000 15
Operating Fluid Media General Purpose Hydraulic Fluid
0 0
Pressure (PSI)

Pressure (bar)

1500
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
0 5 10 15 20 10025
Cavity SUPER 3WS
Flow (GPM) Cavity Form Tool (Finishing) 40500021
1000
50
Seal Kit 21191404
500

0 0
0 10 20 30 40
Flow (GPM)

without independent study, evaluation, and testing for suitability.

Page MP116
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: 1.89 lbs (.86 kg)

ORDERING INFORMATION

SL-PWB – – –

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 2000 = 2000 PSI

without independent study, evaluation, and testing for suitability.

Page MP117
MECHANICAL PRESSURE CONTROLS

without independent study, evaluation, and testing for suitability.

Page MP118
MECHANICAL PRESSURE CONTROLS

SHUT DOWN VALVES

GPM PSI LPM BAR CAVITY MODEL PAGE

15 4500 57 310 7/8-14 DE-PSD MP120

TYPICAL SCHEMATIC

Typical application for the PSD is a system protector, like a relief valve, but once this valve opens it will not reseat until the pressure at port (2) is
drained off. This valve is not to be used as a load holding device.

without independent study, evaluation, and testing for suitability.

Page MP119
MECHANICAL PRESSURE CONTROLS

DE-PSD PRESSURE SHUT DOWN VALVE

DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, pressure shut down valve.

OPERATION
The DE-PSD blocks flow from (2) to (1) until sufficient pressure is present at (2) to open the pilot, thereby forcing
the spool to open and allowing flow from (2) to (1). The valve stays open until the differential pressure from (2) to
(1) decreases to less than 50 PSI (3.4 bar).

FEATURES
• Hardened parts for long life.
• Industry common cavity.

HYDRAULIC SYMBOL
Usually the valve requires flow to be reduced to
near zero before the valve will reset.

Flow (LPM)
0 25 50 75
200

PERFORMANCE VALVE SPECIFICATIONS

Pressure Drop (PSI)

Pressure Drop (bar)

150 10
Actual Test Data (Cartridge Only) Nominal Flow 15 GPM (57 LPM)
100 Rated Operating Pressure 4500 PSI (310 bar)
Flow (LPM) 5 Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
50
0 25 50 75 Filtration ISO 18/16/13
200
0 0 Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
0 5 10 15 20 Weight .53 lbs (.24 kg)
Pressure Drop (PSI)

Pressure Drop (bar)

150 10
Flow (GPM) Operating Fluid Media General Purpose Hydraulic Fluid
Port 2 to 1 Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
100
5 Cavity DELTA 2W
50 Cavity Form Tool (Finishing) 40500000
Seal Kit 21191200
0 0
0 5 10 15 20
Flow (GPM)
Port 2 to 1

without independent study, evaluation, and testing for suitability.

Page MP120
MECHANICAL PRESSURE CONTROLS

DIMENSIONS

Body Weight: .47 lbs (.21 kg)

ORDERING INFORMATION

DE-PSD – – –

OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8” NPTF Ports
Buna, Knob 0K S #8 SAE Ports
Viton, Knob VK
Buna, Internal Adjust 0I
Viton, Internal Adjust VI
Buna, Tamper Proof 0T
Viton, Tamper Proof VT PRESSURE RANGE/SETTING
3000 100-3000 PSI
4500 3000-4500 PSI

Tamper Proof
Fill in 4 Digit Pressure Setting
Example: 0500 = 500 PSI

Note: aluminum NOT durability rated for

without independent study, evaluation, and testing for suitability.

Page MP121

Rotter Incomplete Sentence Blank Test1
71% (7)
Rotter Incomplete Sentence Blank Test1
6 pages
AA6VM - 63 Application and Service Manual
100% (3)
AA6VM - 63 Application and Service Manual
28 pages
DMS2100i Bridge Manoeuvring System: MAN B&W ME/ME-C Engines
No ratings yet
DMS2100i Bridge Manoeuvring System: MAN B&W ME/ME-C Engines
113 pages
VALVITALIA-cat. PDA Actuators - Rev1.4
No ratings yet
VALVITALIA-cat. PDA Actuators - Rev1.4
8 pages
Eaton 54 Series Pump Parts
80% (5)
Eaton 54 Series Pump Parts
4 pages
Assessment Checklist
100% (1)
Assessment Checklist
5 pages
The Standard of People'S Republic of China: Issued and Presented by
100% (1)
The Standard of People'S Republic of China: Issued and Presented by
16 pages
Valves Barendsen PDF
No ratings yet
Valves Barendsen PDF
63 pages
MAN B&W ME Type Engine
No ratings yet
MAN B&W ME Type Engine
95 pages
Kladivar
No ratings yet
Kladivar
107 pages
Alga Algas
No ratings yet
Alga Algas
40 pages
Manual of Standards
0% (1)
Manual of Standards
103 pages
23021 Delta-Power-Brochure-2023 03132023 FINAL WEB
No ratings yet
23021 Delta-Power-Brochure-2023 03132023 FINAL WEB
10 pages
Da Daw-Pilot Unloading Relief Valve
No ratings yet
Da Daw-Pilot Unloading Relief Valve
9 pages
VB 1001 - 0708 - Web
No ratings yet
VB 1001 - 0708 - Web
6 pages
2-Speed Valve - Hägglunds VTCA 600
No ratings yet
2-Speed Valve - Hägglunds VTCA 600
24 pages
MPW Mpa MPB
No ratings yet
MPW Mpa MPB
9 pages
YUKEN Modular Valves
No ratings yet
YUKEN Modular Valves
136 pages
Check Valve 1 Chiều
No ratings yet
Check Valve 1 Chiều
36 pages
Amca MDM 5 03 06
100% (1)
Amca MDM 5 03 06
4 pages
TESTO ITC KORINNA 28mm Allargato: Monoblock Directional Control Valve
No ratings yet
TESTO ITC KORINNA 28mm Allargato: Monoblock Directional Control Valve
64 pages
TESTO ITC KORINNA 28mm Allargato: Monoblock Directional Control Valve
No ratings yet
TESTO ITC KORINNA 28mm Allargato: Monoblock Directional Control Valve
132 pages
Liebherr Short Description Dmva Double Motor
No ratings yet
Liebherr Short Description Dmva Double Motor
4 pages
CPM
No ratings yet
CPM
84 pages
Main Engine
No ratings yet
Main Engine
10 pages
Motorized 2, 3-Port Ball Valve Precautions (0.2MB)
No ratings yet
Motorized 2, 3-Port Ball Valve Precautions (0.2MB)
4 pages
Johnson Motorized Valve Threaded
No ratings yet
Johnson Motorized Valve Threaded
1 page
Valves Barendsen
No ratings yet
Valves Barendsen
63 pages
Scott Cylinder
100% (1)
Scott Cylinder
5 pages
Amca Mev A e 06 07 PDF
No ratings yet
Amca Mev A e 06 07 PDF
32 pages
Air Distribution
No ratings yet
Air Distribution
84 pages
Mobile Valves
No ratings yet
Mobile Valves
58 pages
Mobile Valves
No ratings yet
Mobile Valves
58 pages
vcat_28th
No ratings yet
vcat_28th
156 pages
Ra91604 02-04 AA6VM
No ratings yet
Ra91604 02-04 AA6VM
64 pages
Covna Electric 3 Piece Ball Valve Catalog
No ratings yet
Covna Electric 3 Piece Ball Valve Catalog
20 pages
10 MV 1
No ratings yet
10 MV 1
10 pages
Hydraulics 12: Catalogue
No ratings yet
Hydraulics 12: Catalogue
107 pages
Pratt Cylinderactuator Datasheet f13690 V2-Web
No ratings yet
Pratt Cylinderactuator Datasheet f13690 V2-Web
3 pages
MDP 5 - 400 P 405071 en PDF
No ratings yet
MDP 5 - 400 P 405071 en PDF
3 pages
MDP 5 - 400 P 405071 en PDF
No ratings yet
MDP 5 - 400 P 405071 en PDF
3 pages
عرض ١ مولد
No ratings yet
عرض ١ مولد
5 pages
ME Engine (Intelligent Engine)
100% (5)
ME Engine (Intelligent Engine)
95 pages
yuken modular valve
No ratings yet
yuken modular valve
8 pages
A2-MEDIUM-DUTY-VARIABLE-MOTOR - MA2V v1.4
No ratings yet
A2-MEDIUM-DUTY-VARIABLE-MOTOR - MA2V v1.4
30 pages
CVS Type 1051 Rotary Actuator: Instruction Manual
No ratings yet
CVS Type 1051 Rotary Actuator: Instruction Manual
12 pages
5266 Controls: Safety Exhaust (Dump)
No ratings yet
5266 Controls: Safety Exhaust (Dump)
12 pages
SSWN-32_V
No ratings yet
SSWN-32_V
12 pages
Hyd Int Val 20HM24 30 108 109 Rev 0110
No ratings yet
Hyd Int Val 20HM24 30 108 109 Rev 0110
2 pages
Chalwyn CE111
No ratings yet
Chalwyn CE111
20 pages
SD11
No ratings yet
SD11
68 pages
DCV 03 hk66t102
No ratings yet
DCV 03 hk66t102
15 pages
Covna Electric Wafer Butterfly Valve Catalog
No ratings yet
Covna Electric Wafer Butterfly Valve Catalog
18 pages
Shop Presses Instruction Manual: Max. Operating Pressure 10,000 PSI
No ratings yet
Shop Presses Instruction Manual: Max. Operating Pressure 10,000 PSI
10 pages
Solenoid Operated On Off Cartridge Valves PDF
100% (1)
Solenoid Operated On Off Cartridge Valves PDF
218 pages
C2247IE
No ratings yet
C2247IE
8 pages
21700-Series-Data-Sheet-sm gate
No ratings yet
21700-Series-Data-Sheet-sm gate
2 pages
8 External Documentation
No ratings yet
8 External Documentation
691 pages
Rexroth SV SL P.O. Check Valve Re21468 - 2005-07
No ratings yet
Rexroth SV SL P.O. Check Valve Re21468 - 2005-07
8 pages
Rocker Gear and Valves
No ratings yet
Rocker Gear and Valves
10 pages
Catalogo Martinetti BVA
100% (1)
Catalogo Martinetti BVA
108 pages
Electronic Automotive Transmission Troubleshooter Nissan-Infinity Vehicles
From Everand
Electronic Automotive Transmission Troubleshooter Nissan-Infinity Vehicles
Mandy Concepcion
No ratings yet
Electronic Automotive Transmission Troubleshooter Honda Acura vehicles
From Everand
Electronic Automotive Transmission Troubleshooter Honda Acura vehicles
Mandy Concepcion
No ratings yet
AC Electric Motors Control: Advanced Design Techniques and Applications
From Everand
AC Electric Motors Control: Advanced Design Techniques and Applications
Fouad Giri
No ratings yet
Electrical & Mechanical Components World Summary: Market Values & Financials by Country
From Everand
Electrical & Mechanical Components World Summary: Market Values & Financials by Country
Editorial DataGroup
No ratings yet
Electronic Automotive Transmission Troubleshooter Toyota & Lexus Vehicles
From Everand
Electronic Automotive Transmission Troubleshooter Toyota & Lexus Vehicles
Mandy Concepcion
No ratings yet
Pressure and Flow Control System: RE 30035, Edition: 2021-10, Bosch Rexroth AG
No ratings yet
Pressure and Flow Control System: RE 30035, Edition: 2021-10, Bosch Rexroth AG
44 pages
HY25-1249-M1 US Final 07.11.14742
100% (1)
HY25-1249-M1 US Final 07.11.14742
40 pages
Bomba Racine E055 9535233228 - 1101
No ratings yet
Bomba Racine E055 9535233228 - 1101
2 pages
Oilgear Designers Handbook
100% (1)
Oilgear Designers Handbook
250 pages
Div Advisory No 014, S 2021 Virtual Orientation On The Dost Courseware
No ratings yet
Div Advisory No 014, S 2021 Virtual Orientation On The Dost Courseware
2 pages
Uenr2528uenr2528 Sis, Electric
No ratings yet
Uenr2528uenr2528 Sis, Electric
20 pages
Clinical Management of The MARA
100% (1)
Clinical Management of The MARA
59 pages
Data Stage
No ratings yet
Data Stage
76 pages
Business Communication CH 3 Notes
No ratings yet
Business Communication CH 3 Notes
9 pages
Experiments - RC Circuit Sheet PDF
No ratings yet
Experiments - RC Circuit Sheet PDF
5 pages
What Is Attack Tree in Threat Models
No ratings yet
What Is Attack Tree in Threat Models
8 pages
microbiology poster
No ratings yet
microbiology poster
1 page
Sub: Guidelines For Acquiring and Producing Geospatial Data and Geospatial Data Services Including Maps Preamble
No ratings yet
Sub: Guidelines For Acquiring and Producing Geospatial Data and Geospatial Data Services Including Maps Preamble
5 pages
Workers and Machine Performance Modeling in Manufacturing System Using Arena Simulation
No ratings yet
Workers and Machine Performance Modeling in Manufacturing System Using Arena Simulation
11 pages
IGP CSAT Paper 1 Geography Indian Geography General Land and The People
No ratings yet
IGP CSAT Paper 1 Geography Indian Geography General Land and The People
4 pages
STK411 200e
No ratings yet
STK411 200e
1 page
Point Slope Powerpoint
No ratings yet
Point Slope Powerpoint
18 pages
LEADERSHIP SKILLs-1
No ratings yet
LEADERSHIP SKILLs-1
21 pages
2. DE ngay 14.11 Co Huong gui- 2023 - Copy
No ratings yet
2. DE ngay 14.11 Co Huong gui- 2023 - Copy
16 pages
Thermal Stress
100% (1)
Thermal Stress
104 pages
Lecture 6.6
No ratings yet
Lecture 6.6
21 pages
2024-11-29 Statement - USB Checking 3544 (3)
No ratings yet
2024-11-29 Statement - USB Checking 3544 (3)
12 pages
general-english-asi-ub
No ratings yet
general-english-asi-ub
3 pages
ExperimentNo 1-UniformAcceleration
No ratings yet
ExperimentNo 1-UniformAcceleration
7 pages
Zara Company Report
No ratings yet
Zara Company Report
7 pages
1 CBMEC - 1 Strategic Management Nature of Strategic Management
No ratings yet
1 CBMEC - 1 Strategic Management Nature of Strategic Management
25 pages
Initial Force on Spring
No ratings yet
Initial Force on Spring
3 pages
Payment Clearance Certificate
No ratings yet
Payment Clearance Certificate
1 page
Chapter 02 (2)
No ratings yet
Chapter 02 (2)
38 pages