Scribd
Upload
742 views3 pages

FAULT CODE 415 - Engine Oil Rifle Pressure - Data Valid But Below Normal Operating Range - Most Severe Level

The document provides troubleshooting steps for an engine oil rifle pressure fault code 415. It details checking the fault codes, checking for an ECM calibration update, disabling the fault code, and repair steps.

Uploaded by

khaled kamel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
742 views3 pages

FAULT CODE 415 - Engine Oil Rifle Pressure - Data Valid But Below Normal Operating Range - Most Severe Level

The document provides troubleshooting steps for an engine oil rifle pressure fault code 415. It details checking the fault codes, checking for an ECM calibration update, disabling the fault code, and repair steps.

Uploaded by

khaled kamel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

File: 00-t05-415 Page 1 of 3

FAULT CODE 415 - Engine Oil Rifle Pressure - Data Valid But Below Normal
Operating Range - Most Severe Level
TROUBLESHOOTING SUMMARY

STEPS SPECIFICATIONS SRT CODE


STEP 1: Check the fault codes.
STEP 1A: Check the fault codes. Active or inactive counts of
Fault Code 415?
STEP 2: Check engine control module (ECM) calibration and clear fault codes.
STEP 2A: Check if an ECM calibration If a calibration update for this
update is available. fault code is available, does the
ECM contain that revision or
higher?
STEP 2B: Disable the fault code. Fault code inactive?

TROUBLESHOOTING STEP

STEP 1: Check the fault codes.


STEP 1A: Check the fault codes.
Condition:
• Turn keyswitch ON.
• Connect INSITE™ electronic service tool.
• Engine running at idle speed.

Action Specification/Repair Next Step

Check the fault codes. Active or inactive counts of Fault Code 415? 2A
• Use INSITE™ electronic service tool to read YES
the fault codes.
Repair:
Low engine oil pressure has been detected.
Reference the Lubricating Oil Pressure Low
troubleshooting symptom tree in Section TS
of the appropriate service manual.

Active or inactive counts of Fault Code 415? 2A


NO

© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 22-Jan-2016
File: 00-t05-415 Page 2 of 3

STEP 2: Check ECM calibration and clear fault codes.


STEP 2A: Check if an ECM calibration update is available.
Condition:
• Connect all components.
• Connect INSITE™ electronic service tool.

Action Specification/Repair Next Step

Compare the ECM code and revision number in If a calibration update for this fault code is 2B
the ECM to the calibration revisions listed in the available, does the ECM contain that revision
ECM Calibration Revision History for applicable or higher?
changes related to this fault code. YES
• Use INSITE™ electronic service tool to find
the present ECM code and revision number in
the ECM. The ECM code and revision number If a calibration update for this fault code is 2B
are found in the Calibration Information available, does the ECM contain that revision
section of System ID and Dataplate in or higher?
Features and Parameters. NO
Repair:
If necessary, calibrate the ECM. Refer to
Procedure 019-032 in Section 19.

STEP 2B: Disable the fault code.


Condition:
• Connect all components.
• Connect INSITE™ electronic service tool.

Action Specification/Repair Next Step

Disable and clear the fault code. Fault code inactive? Repair
• Operate the engine within the "Conditions for YES complete.
Clearing the Fault Code" found in the
Overview section of this troubleshooting
procedure. Fault code inactive? 1A
NO
Repair:
Return to the troubleshooting steps or
contact a Cummins® Authorized Repair
Location if all steps have been completed
and checked again.

© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 22-Jan-2016
File: 00-t05-415 Page 3 of 3

© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 22-Jan-2016

You might also like