HiveOS 8.

2r6 Release Notes

Release date: May 13, 2019

Hardware platforms supported: AP122, AP122X, AP130, AP150W, AP230, AP245X, AP250, AP550, and AP1130

Management platforms supported: HiveManager 8.2r2 and later, and HiveManager NG 19.4.2.0 and later

Known and Addressed Issues

Known Issues in HiveOS 8.2r6
HOS-11615 An admin cannot add a new NAS (network access server) list unless the local RADIUS server
is first disabled and then re-enabled.
HOS-11450 When tunneling wired guest traffic to a DMZ on an AP150W, the clients do not receive the
appropriate IP address and tunneling is not successful.

Workaround: Have clients connect to the wireless interfaces for tunneling guest traffic.
HOS-11138 Enabling Bonjour Gateway on an AP150W, AP122 or AP122X can cause those devices to
report excessively high CPU loads.

Workaround: Because Bonjour Gateway is a legacy feature, and is generally unnecessary,

you can either disable Bonjour Gateway, or relocate Bonjour Gateways to a
higher-powered access point such as an AP550.
HOS-11087 On the AP150W, if Client Monitor is performed against multiple clients concurrently, the
access point occasionally loses the CAPWAP connection to HiveManager.
HOS-11004 Remote Packet Capture on the AP150W can only capture traffic from wireless interfaces.

Addressed Issues in HiveOS 8.2r6

CFD-4059 HiveManager administrators could not fetch techdata files from access points.
CFD-4043 HiveOS Access-Requests for RADIUS admin auth did not use the correct Service-Type value
of 'Administrative'.
CFD-4014 A file system error caused Aerohive APs to reboot.

Addressed Issues in HiveOS 8.2r5

CFD-3905 AP130 Wifi1 radio (5 GHz) sometimes stopped transmitting or receiving, resulting in loss of
client connectivity.
CFD-3892 Wi-Fi radios of AP250 and AP550 access point were spontaneously reinitializing.
CFD-3882 MDM enrollment of mobile devices was unsuccessful.
CFD-3858 When disabled, the embedded web server continued to respond on the mgt0 interface.

For more information: Online Documentation Community 1

2019 ©Aerohive Networks, Inc. Aerohive is a U.S. registered trademark of Aerohive Networks, Inc.
Known and Addressed Issues HiveOS 8.2r6 Release Notes

CFD-3836 Remote AP250 access points were unable to join domains.

CFD-3812 AP configured to use aggregate Ethernet interfaces require 802.11at power, but were
reporting using only 802.11af power, which resulted in unstable client connectivity.
CFD-3695 After upgrading from HiveOS 6.5r10 to HiveOS 8.2r4, AP230 access points were
spontaneously rebooting and reverting back to HiveOS 6.5r10.
CFD-3687 AP230 access points were spontaneously rebooting without apparent cause.
CFD-3673 DFS was enabled on AP1130 access points, even when DFS was disabled in the radio profile.
CFD-3667 AP130 access points running HiveOS 8.2r3 were rebooting.
CFD-3599 AP250 and AP550 access points were exhibiting high CPU utilization when using GRE tunnels.
CFD-3574 Client devices were losing connectivity when connected to AP150W access points on the
2.4 GHz interface.
CFD-3561 CRC error airtime percent appeared with the incorrect value.
CFD-3549 The login success page redirection URL was used for both Login Successful and Registration
Successful results.
CFD-3528 EIRP power appeared with the incorrect value.
CFD-3516 The voice call setup process was unsuccessful because of ARP cache IP address mismatch.
CFD-3459 64-bit values queried for the 1.3.6.1.2.1.31.1.1.1.10.6 OID using SNMP were truncated, leaving
only the low-order 32 bits.

Addressed Issues in HiveOS 8.2r4

CFD-3513 User groups that existed within nested OUs were not properly added for LDAP server attribute
mapping.
CFD-3511 When an admin entered the show station command with ARP proxy disabled, the IP
address of client devices that were connecting with a static IP address appeared as 0.0.0.0.
CFD-3472 Some devices running spectrum analysis incorrectly reported interference sources.
CFD-3470 When iPhones attempted to reconnect to an SSID with auto-join disabled, the AP sometimes
returned the following error instead of connecting to the SSID: Incorrect password for <ssid>.
CFD-3461 Some outbound traffic to international subnets contained the IP address of the AP as the
source address.
CFD-3460 When WMM was disabled on an SSID, AP122, AP130, and AP230 access points were unable
to associate to the SSID.
CFD-3439 SNMP did not function properly after rebooting the device when the SNMP server was
configured to use the domain name.
CFD-3414 UPA (Use Policy Acceptance) authentication does not work properly when also using PPSK.
CFD-3396 The default captive web portal IP address redirected users to the Cloudfare DNS website.
CFD-3376 After updating HiveOS devices to HiveOS 6.5r9a, some users could no longer authenticate
using 802.1X authentication.
CFD-3265 Fragmented DNSv6 packets were not forwarded to the Wi-Fi interfaces.
CFD-2999 When connecting to a PPSK SSID after self-registering, the UPA captive web portal did not
appear.

For more information: Online Documentation Community 2

2019 ©Aerohive Networks, Inc. Aerohive is a U.S. registered trademark of Aerohive Networks, Inc.
Known and Addressed Issues HiveOS 8.2r6 Release Notes

Addressed Issues in HiveOS 8.2r3

CFD-3349 When exporting tech data, AP122 access points did not generate show station output.
CFD-3294 Access points sometimes did not update successfully when static scanning channels were
configured to include DFS channels.
CFD-3149 The Wifi0 interface sometimes did not respond properly to RTS frames sent by client devices.
CFD-3139 AP120 and AP230 access points sometimes spontaneously rebooted.
CFD-3129 In some cases, AP550 access points running HiveOS 8.2r1 frequently rebooted.
CFD-2832 AP250 access points running HiveOS 8.2r1were rebooting.
CFD-2781 AP550 access points erroneously reported high utilization, which appeared in the
HiveManager spectrum analysis displays.
CFD-2644 AP230 access points classified 802.1p traffic properly, but did not properly classify some
DiffServ traffic.
HOS-12634 Zero-DFS did not function properly on AP150W, AP250, and AP550 access points running
HiveOS 8.2r1.
HOS-12259 APs running HiveOS 8.2r1 sometimes did not detect neighboring devices running on other
channels during background scanning.

Addressed Issues in HiveOS 8.2r2

CFD-3208 When using self-registration with captive web portal, the captive web portal did not appear
on client devices running Android 7.1 or later, preventing successful registration.
CFD-3181 HiveOS devices did not properly respond to some Disconnect-Request and
Change-of-Authorization packets.
CFD-3155 ID Manager users were unable to authenticate because HiveOS was using an incorrect IDM
Proxy address.
CFD-3140 AP550 access points sometimes spontaneously rebooted.
CFD-3129
CFD-3139 AP130 and AP230 access point sometimes spontaneously rebooted.
CFD-3103 The HiveManager PPSK import process did not import email addresses that use the .asia
domain.
CFD-3102 In some cases, Disconnect-Request and CoA packets were not processed properly, resulting
in persistent retries.
CFD-3061 The RADIUS Service-Type attribute was not set properly within Access-Request and
Accounting-Request packets.
CFD-3042 IP-Policy Layer 7 IPv6 rules whose source address value was "any" did not function properly.
CFD-3035 Devices running HiveOS 8.1 sometimes raised alarms in HiveManager when using RADIUS
with attribute mapping.
CFD-3034 HPE/Aruba ClearPass did not function properly when MAC authentication was used.
CFD-3017 IP address byte order in Layer 7 log entries was reversed.
CFD-3015 HiveManager NG allowed an admin to enter a 32-character user profile assignment group
name, but returned an error after the attempt.

For more information: Online Documentation Community 3

2019 ©Aerohive Networks, Inc. Aerohive is a U.S. registered trademark of Aerohive Networks, Inc.
Known and Addressed Issues HiveOS 8.2r6 Release Notes

CFD-3001 AP550 access points were not drawing the correct PoE power from the PSE when LLDP was
enabled.
CFD-2945 The AP150W did not correctly negotiate 802.3at power levels when using LLDP-MED.
CFD-2910 Devices using the Taiwan country code (158) did not support DFS.
HOS-13111 Under certain circumstances when using RADIUS-based authentication, some wireless clients
did not complete DHCP negotiations successfully, and did not acquire an IP address.
HOS-12459 AP550 access points sometimes assigned Wi-Fi radio channels separated by too narrow a
separation.

Addressed Issues in HiveOS 8.2r1a

CFD-3076 AP245X access points operating on the 2.4 GHz band were experiencing very high airtime
utilization in some regions.
CFD-3039 AP245X access point running HiveOS 8.2r1 sometimes stopped forwarding client traffic to the
network, resulting in a loss of client connectivity.
CFD-2980 Clients connected to some APs running HiveOS 8.2r1 were experiencing intermittent packet
loss on the 2.4 GHz band.
CFD-2973 Some devices were able to connect to AP230 and AP330 access points, but not to AP250
access points with a similar configuration.
CFD-2924 AP250 access points running HiveOS 8.1r2a were experiencing high CPU utilization.

Addressed Issues in HiveOS 8.2r1

HOS-11248 For the AP150W, the rate limiting settings for Eth2 and Eth3 did not appear after running a
show running config command.

For more information: Online Documentation Community 4

2019 ©Aerohive Networks, Inc. Aerohive is a U.S. registered trademark of Aerohive Networks, Inc.