Scribd
Upload
672 views1 page

Piping Thickness Measurement Report

This document provides a piping thickness measurement report for Line 17-SG-1048-4’’-06CB1S01-SGC-N-18. Key details include: - The line material is carbon steel and is non-insulated. - Thickness measurements were taken at four locations on the pipe and fittings on March 5, 2020. - The measurements for the pipe straight and elbows were within the nominal thickness of 8.56mm, with minimum thicknesses ranging from 8.23mm to 8.67mm.

Uploaded by

Tevriyudha Mardika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
672 views1 page

Piping Thickness Measurement Report

This document provides a piping thickness measurement report for Line 17-SG-1048-4’’-06CB1S01-SGC-N-18. Key details include: - The line material is carbon steel and is non-insulated. - Thickness measurements were taken at four locations on the pipe and fittings on March 5, 2020. - The measurements for the pipe straight and elbows were within the nominal thickness of 8.56mm, with minimum thicknesses ranging from 8.23mm to 8.67mm.

Uploaded by

Tevriyudha Mardika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Document No.

PAU-REI-CM-0013
Piping Thickness Measurement Report Rev: 01 Status: IFR
(API 570 – Process Piping)
Date: 20 Sep 2019
th

Page 2 of 3

Line No. : 17-SG-1048-4’’-06CB1S01-SGC-N-18 Report No. : PAU-REI-FIR-0459


Line Description : Line pipe Natural gas Insp. Date : 05 March 2020
Ref. WO No. : 29281, 29283, 29284, 29285, 29286, 29287 Prev. Insp. Date : -
Location/Area : 124-D/Area-17 Rev. No : 0

Line Identification

Line Class : ☒ Class -1 ☐ Class-2 ☐ Class-3 ☐ Class -4

Material : ☒ Carbon Steel ☐ Stainless Steel ☐ Others

Insulation : ☐ Insulated ☒ Non-Insulated ☐ Partially Insulated

Thickness Measurement Location (TML) Orientation Scanning Area for Pipe & Fitting

tml-1

tml-4 tml-2

tml-3

Measurement Result
Nominal Thickness Measurement (mm)
Isometric Drawing Pipe Part Size
CML# Thickness
No Description (inch) tml-1 tml-2 tml-3 tml-4 tmin
(mm)
17-SG-1048-4’’-
1 06CB1S01-SGC-N- Pipe straight 4 8.56 8.47 8.69 8.40 8.82 8.40
18

2 Elbow 4 8.56 8.74 8.33 9.24 10.54

8.62 8.37 9.14 10.49 8.33

8.57 8.51 9.11 10.05

3 Elbow 4 8.56 9.77 9.16 8.81 8.93

9.61 9.03 8.67 8.88 8.67

9.91 9.19 8.69 8.92

4 Reducer-1 4x3 8.56 8.88 9.68 8.76 8.79


8.23
9.16 9.10 8.23 9.21

This document is the property of Panca Amara Utama.


It must not be stored, reproduced or disclosed to others without written authorization from the Company.

You might also like