Scribd
Upload
33 views

COLAS

This document contains configuration information for a Mikrotik RouterBOARD 1100Dx4 router with serial number 735C078BC107. It defines queue types, queue trees, SNMP settings, and firewall rules for prioritizing different types of traffic. Eight priority levels are set using packet marking for protocols like ICMP, DNS, HTTP, FTP, and P2P traffic.

Uploaded by

Jose Manuel Diaz Gonzalez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
33 views

COLAS

This document contains configuration information for a Mikrotik RouterBOARD 1100Dx4 router with serial number 735C078BC107. It defines queue types, queue trees, SNMP settings, and firewall rules for prioritizing different types of traffic. Eight priority levels are set using packet marking for protocols like ICMP, DNS, HTTP, FTP, and P2P traffic.

Uploaded by

Jose Manuel Diaz Gonzalez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

# dec/02/2021 05:47:34 by RouterOS 6.

47
# software id = PPVN-CWKQ
#
# model = RouterBOARD 1100Dx4
# serial number = 735C078BC107

/queue type
add kind=sfq name=BAJADA
add kind=sfq name=SUBIDA
/queue tree
add name=Upload parent=ether1_WAN priority=1 queue=SUBIDA
add name=PRIO.1 packet-mark="PRIO 1" parent=Upload priority=1 queue=SUBIDA
add name=PRIO.2 packet-mark="PRIO 2" parent=Upload priority=2 queue=SUBIDA
add name=PRIO.3 packet-mark="PRIO 3" parent=Upload priority=3 queue=SUBIDA
add name=PRIO.4 packet-mark="PRIO 4" parent=Upload priority=4 queue=SUBIDA
add name=PRIO.5 packet-mark="PRIO 5" parent=Upload priority=5 queue=SUBIDA
add name=PRIO.7 packet-mark="PRIO 7" parent=Upload priority=7 queue=SUBIDA
add name=PRIO.8 packet-mark="PRIO 8" parent=Upload queue=SUBIDA
add name=Download parent=ether10 priority=1 queue=BAJADA
add name=PRIO1 packet-mark="PRIO 1" parent=Download priority=1 queue=BAJADA
add name=PRIO2 packet-mark="PRIO 2" parent=Download priority=2 queue=BAJADA
add name=PRIO3 packet-mark="PRIO 3" parent=Download priority=3 queue=BAJADA
add name=PRIO4 packet-mark="PRIO 4" parent=Download priority=4 queue=BAJADA
add name=PRIO5 packet-mark="PRIO 5" parent=Download priority=5 queue=BAJADA
add name=PRIO7 packet-mark="PRIO 7" parent=Download priority=7 queue=BAJADA
add name=PRIO8 packet-mark="PRIO 8" parent=Download queue=BAJADA

/snmp community
set [ find default=yes ] addresses=0.0.0.0/0

/ip firewall mangle


add action=mark-connection chain=prerouting comment="MARCO PRIO 1" \
new-connection-mark="PRIO 1" passthrough=yes protocol=icmp
add action=mark-connection chain=prerouting dst-port=8291 \
new-connection-mark="PRIO 1" passthrough=yes protocol=tcp
add action=mark-connection chain=output dst-port=53 new-connection-mark=\
"PRIO 1" passthrough=yes protocol=udp
add action=mark-connection chain=prerouting dst-port=53 new-connection-mark=\
"PRIO 1" passthrough=yes protocol=udp
add action=mark-packet chain=prerouting connection-mark="PRIO 1" \
new-packet-mark="PRIO 1" passthrough=yes
add action=jump chain=prerouting jump-target="TERMINO DE PROCESAR" \
packet-mark="PRIO 1"
add action=mark-connection chain=prerouting comment="MARCO PRIO 2 , HTTP" \
dst-port=80,443 new-connection-mark="PRIO 2" passthrough=yes protocol=tcp
add action=mark-packet chain=prerouting connection-mark="PRIO 2" \
new-packet-mark="PRIO 2" passthrough=yes
add action=jump chain=prerouting jump-target="TERMINO DE PROCESAR" \
packet-mark="PRIO 2"
add action=mark-connection chain=prerouting comment="MARCO PRIO 3 " dst-port=\
1723 new-connection-mark="PRIO 3" passthrough=yes protocol=tcp
add action=mark-packet chain=prerouting connection-mark="PRIO 3" \
new-packet-mark="PRIO 3" passthrough=yes
add action=jump chain=prerouting jump-target="TERMINO DE PROCESAR" \
packet-mark="PRIO 3"
add action=mark-connection chain=prerouting comment=\
"PRIO 4 - PUERTOS COMUNES" dst-port=25,110,143,3389,1723,21-23 \
new-connection-mark="PRIO 4" passthrough=yes protocol=tcp
add action=mark-packet chain=prerouting connection-mark="PRIO 4" \
new-packet-mark="PRIO 4" passthrough=yes
add action=jump chain=prerouting jump-target="TERMINO DE PROCESAR" \
packet-mark="PRIO 4"
add action=mark-connection chain=prerouting comment="MARCO PRIO 5" \
new-connection-mark="PRIO 5" passthrough=yes
add action=mark-packet chain=prerouting connection-mark="PRIO 5" \
new-packet-mark="PRIO 5" passthrough=yes
add action=accept chain="TERMINO DE PROCESAR"
add action=mark-connection chain=prerouting comment="PRIO - 7 MULTIDESCARGAS" \
connection-bytes=50000000-0 new-connection-mark="PRIO 7" passthrough=yes \
protocol=tcp
add action=mark-packet chain=prerouting connection-mark="PRIO 7" \
new-packet-mark="PRIO 7" passthrough=yes
add action=jump chain=prerouting jump-target="TERMINO DE PROCESAR" \
packet-mark="PRIO 7"
# p2p matcher is obsolete please use layer7 matcher instead
add action=mark-connection chain=prerouting comment=P2P new-connection-mark=\
"PRIO 8" p2p=all-p2p passthrough=yes
add action=mark-packet chain=prerouting connection-mark="PRIO 8" \
new-packet-mark="PRIO 8" passthrough=yes
add action=jump chain=prerouting jump-target="TERMINO DE PROCESAR" \
packet-mark="PRIO 8"

/tool e-mail
set address=smtp.gmail.com from=Mikrotik-Faysol password=Onutech2008 port=587 \
start-tls=yes [email protected]

You might also like