0% found this document useful (0 votes)
86 views1 page

Proposed Construction of Medical College, Rudrapur, Udhamsingh Nagar, Uttarakhand. Abstract of Quantity

This document provides an estimate for the proposed construction of a medical college in Rudrapur, Uttarakhand, India. It includes a list of 51 items with descriptions, units, quantities, rates, and amounts. Some key items include: - Providing woodwork for doors and windows using sal wood timber. - Providing and fixing flush door shutters made of blockboard with commercial ply veneers and stainless steel butt hinges. - Providing UPVC windows, ventilators, and doors with frames, mullions, glazing beads and fittings like hinges, locks and gaskets. - The total estimate is for various civil works required to construct the medical

Uploaded by

Narayan Bhosekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
86 views1 page

Proposed Construction of Medical College, Rudrapur, Udhamsingh Nagar, Uttarakhand. Abstract of Quantity

This document provides an estimate for the proposed construction of a medical college in Rudrapur, Uttarakhand, India. It includes a list of 51 items with descriptions, units, quantities, rates, and amounts. Some key items include: - Providing woodwork for doors and windows using sal wood timber. - Providing and fixing flush door shutters made of blockboard with commercial ply veneers and stainless steel butt hinges. - Providing UPVC windows, ventilators, and doors with frames, mullions, glazing beads and fittings like hinges, locks and gaskets. - The total estimate is for various civil works required to construct the medical

Uploaded by

Narayan Bhosekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DLI/CON/883/757 ESTIMATE

PROPOSED CONSTRUCTION OF MEDICAL COLLEGE, RUDRAPUR, UDHAMSINGH NAGAR, UTTARAKHAND.


ABSTRACT OF QUANTITY

Sl. Rate
Description of Item Unit Total Quantity Amount
No. (with GST)

43 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with
hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

i) Sal wood
cum 1.13 105327.20 119019.74
44 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board
construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and
face veneers on both faces of shutters

i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 42.84 1886.70 80826.23
45 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area
of door shutter to be measured). sqm 42.84 401.40 17195.98
46 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter
to be measured):
a Rectangular or square sqm 6890.63 173.95 1198625.09
47 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and
embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal
size). each 17422.00 179.20 3122022.40
48 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete

i) 100X58X1.90 mm each 176.00 74.60 13129.60


49 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),
transparent or dyed to required colour or shade, with nuts and screws etc. complete

i) 300x16 mm each 22.00 257.15 5657.30


50 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 )
transparent or dyed to required colour or shade, with necessary screws etc. complete

i) 300x10 mm each 44.00 116.80 5139.20


51 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564,
embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
each 873.60 1003.50 876657.60
52 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564,
embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment
with necessary accessories and screws etc. complete. each 9.00 851.60 7664.40
53 Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per
IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete.

i)Twin rubber stopper each 22.00 62.05 1365.10


54 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic
coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc.
complete. each 22.00 748.65 16470.30
55 Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame
and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made
from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate
dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and
necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall
be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant
shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be
acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

a Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm
and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) sqm 401.82 6478.75 2603291.33
56 Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-
chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized
mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded
glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of
panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall
be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing &
direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be
a Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64
mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing
bead of appropriate dimension.(Area of door upto 2.50 sqm) sqm 367.59 9328.30 3428989.80
57 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC
multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild
steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of
uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks
with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing
frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all
corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and
adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all
complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent
shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be
a Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small
series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate
dimension (Area of window upto 1.75 sqm). sqm 3948.51 8954.20 35355748.24
58 Float glass panes

a 4 mm thick glass pane (weight not less than 10 kg per sqm) sqm 4350.33 1792.55 7798184.04
59 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory
window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). sqm 467.59 214.05 100087.64
60 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching beading sqm 4350.33 1458.60 6345391.34
61 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in
rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ m²) suitable for mounting 120 min Fire Rated Glazed
Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of
G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening
along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The
frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per
the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).
metre 1934.75 1512.95 2927180.01

You might also like