Product Data Sheet

Intelligent Heat Detector

The low-profile Advanced Intelligent Heat Detectors

have a common profile with the intelligent photoelectric
and ionization detectors, but have a low air flow
resistance case made of self-extinguishing white
polycarbonate. Designed with a built-in dedicated
microprocessor, the intelligent heat detector offers
a wide range of capabilities to suit any commercial,
industrial, or institutional application. Incorporating
dual-alarm LEDs which illuminate red during alarm,
the detector provides a complete 3600 view of device
status. The detector’s dual-alarm LEDs can also be Unique Features:
programmed for flashing during quiescent mode.
• Patented XPerT Detector Base Addressing
The Intelligent Heat Detector incorporates a unique • Built-in Dedicated Microprocessor
industry method of addressing the detector. Each
detector is individually addressed through it’s • Five Selectable Response/Heat Modes
associated base by a patented address (“XPerT”) card. • 1350F to 2000F Static/Rate of Rise
The address is quickly and easily set by removing “pips” • Sub-Addressing of Ancillary Functions
on the XPerT card according to a chart supplied with
each base. Once the address is set on the XPerT card, • Dual-Alarm LEDs with 3600 View
it can be slid into place and locked into the detector
base. By addressing the detector at the base rather
than internally to the detector, the all-too-common errors Features:
associated with detector removal and maintenance are
• Automatic Detector Testing w/Maintenance Alert
eliminated.
• Sub-Addressable Remote LED Output
XPerT Card • Optional Relay and Isolator Bases
• Superior Rejection of Transient Signals
• Detector to Base Locking Mechanism
• Plastic Dust Cover for Construction Protection
Each Intelligent Heat Detector is capable of being field • 100% Digital Communication Protocol
programmed for one of five response/heat modes (see • Integral XPerT Card Address Labeling Tab
Table 1). All five response modes relate to different heat
characteristics. Response modes 1,2, and 5 are Static/ Listings and Approvals:
Rate of Rise. Modes 3 and 5 are static only, with Mode
3 being default. Response mode settings of individual • ETL ANSI/UL 864 Listed: 3118002NYM-001B
detectors are stored within the detector’s memory. The • UL file: UOXX.S5053 / ML file: S24459
advantage of storing this information in the detector • CSFM Approved: 7270-1713:105
rather in the fire alarm control panel software is that the
detector will maintain the programmed response/heat • NYC MEA: 294-95-E-4
settings when power is removed from the detector. If
the detector is powered down or inadvertently replaced
in another location, the detector response/heat mode is
not lost.

901-004 Rev. 1.4 Page 1 of 2

www.advancedco.com
Table 1 Table 2
Response Sensitivity Warehouse Loading Bay Kitchen; Boiler Rm
Mode Characteristics Restaurant Parking Garage Laundry
(enclosed &
1 Ordinary 1350F Static / Rate-of-Rise
ventilated)
2 Ordinary 1500F Static / Rate-of-Rise 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
3 Ordinary 1500F Static         
4 Ordinary 200 F Static / Rate-of-Rise
0 1, 2, 3, 4, 5 = Response/Sensitivity Modes
 = Mode Suitable for Installation
5 Intermediate 200 F Static 0

Another unique industry feature of the Advanced Intelligent

Heat Detector, in conjunction with the AxisAX Series Intelligent
Fire Alarm Control Panel, is it’s ability to sub-address
detector base ancillary functions. Each Intelligent Heat
Detector is capable of incorporating, based on optional
intelligent base utilization, a remote LED and/or relay. When
these options are utilized, the user is capable of sub-
addressing each of these options (remote LED and/or relay)
to activate independently of the intelligent heat detector. This
provides 100% free programmability of the detector base
outputs to meet the demanding requirements of today’s
installations. (For further explanation, refer to Intelligent
Detector Bases and Intelligent Isolator data sheets).

Ordering Information Intelligent Heat Detector Specifications

58000-450ADV Intelligent Heat Detector Voltage 17-28 VDC
* Refer to Intelligent Detector Bases and Intelligent Isolator data sheets for specific information.
Modulation Voltage 5-9 VDC
Operating Current
Quiescent 0.5 mA
Alarm 0.5 mA
w/LED’s 5.5 mA
Surge Current 1.0 mA
Sensitivity - Heat 1350F, 1500F, 2000F
Environment Indoor, Dry
Ambient Temperature 32-1500 F (0-650 C)
Humidity 10-93% (non-condensing)
Dimensions 4” x 1 ⅞”
Weight 3.7 oz
Housing Polycarbonate, 94 V0

Advanced Fire Systems Inc

100 South Street, Hopkinton, MA 01748

Tel: (508) 435-9995

Fax: (508) 435-9990
As our policy is one of constant product improvement the right is therefore Email: [email protected]
reserved to modify product specifications without prior notice. Web: www.advancedco.com

901-004 Rev. 1.4 Page 2 of 2

www.advancedco.com