Scribd
Upload
623 views1 page

Mud Motor Inspection Report: Results

This document is a mud motor inspection report. It details the inspection of a 9 5/8" mud motor that was found to be in good condition with no defects observed. Visual and magnetic particle inspections were performed on 25 components and found to be acceptable without need for repair or scrapping. The housing and mandrel Belleville springs were also inspected and found to be in good condition.

Uploaded by

Nadir Hallah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
623 views1 page

Mud Motor Inspection Report: Results

This document is a mud motor inspection report. It details the inspection of a 9 5/8" mud motor that was found to be in good condition with no defects observed. Visual and magnetic particle inspections were performed on 25 components and found to be acceptable without need for repair or scrapping. The housing and mandrel Belleville springs were also inspected and found to be in good condition.

Uploaded by

Nadir Hallah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EURL OSCO Oil Services Company IMP-OSCO-OP-07

Adresse: B,P 04 Hassi Messaoud-Ouargla


Version : A
Tel : +213 (0)29 79 79 79 Fax : +213 (0)29 79 79 70
E-mail : contact@osco-oil,com Page : 1/1

MUD MOTOR INSPECTION REPORT


Customer: OILSERV Certif N°: NDT/MT/VT 00580 010
Work Location: Hassi Messaoud Issue Date : 10/10/2021
Work Order: 00580 Due Date : 09/04/2022

Specification: DS-1…..Cat 3-5 4th Edition & Oilserv specification Min Black light Intensity : 2984 µW/cm2
Inspection method: MPI (Fluorescent Mag) and White & Black Ink Min Visible Light : 500 Lux
Equipment used: AC Yoke: DC Coil: Setting test ml/100ml: 2
UV Light: UV Meter: Coil A/T: 14300

TOOL DESCRIPTION: 9 5/8 MUD MOTOR (MMO-MBTB) SN:

CONN ROTOR STATOR CONN


COND COND
OD OD
ID ID
Leng TENSIONING NUT Leng

CONN END CAP WITH SLEEV ADJUSTING RING CONN


COND T&B HOUSING NUT COND
OD OD
ID ID
Leng Leng

CONN DRIVE SHAFT ROTOR CATCH PLUG CONN


COND COND
OD OD
ID ID
Leng Leng

CONN A-BENT SUB A-BENT MANDREL CONN


COND COND
OD OD
ID ID
Leng Leng

CONN B-MANDREL ADAPTOR BEARING HOUSING W-SLEEV CONN


COND COND
OD OD
ID ID
Leng Leng

CONN ROTOR ADAPTOR BEARING MANDREL CONN


COND COND
OD OD
ID ID
Leng Leng

CONN THREAD PROTECTOR ROTOR CATCH MANDREL CONN


COND COND
OD OD
ID ID
Leng Leng

CONN S-HOUSING ADAPTOR STATOR HOUSING ADAPTOR-A CONN


COND COND
OD OD
ID ID
Leng Leng

Total Tools Inspected : 25 Comment : Visual and MPI performed on body & thread and No Defect observed at Time of Total Tools For Repair : 00
Results Total Tools Scrapped : 00
Total Tools Accepted : 25 observed at Time of inspection (OK)
04 Housing Belleville Spring and 04 Mandrel Belleville Spring was inspected MPI full body
Inspected By : Approved By :

TD=Thread Damage SD=Shoulder Damage GT=Galled Thread CORR=Corrosion ST=Streched Thread CR=Cracke BB=Belled Box OT=Over Torque
PRO=Worn Profile DIM=Dimensional WO=Wash Out OS=Over Size US=Under Size ECC=Eccentric Wear

You might also like