you can RELY on

CEMENTAID
EVERDURE WATERSTOP
The Way to Better Concrete

SPECIFICATION FOR
TECHNICAL DATA: If the waterstop has been exposed to constant water for any
extended period of time (more than 10 days) check for expan-
Everdure Waterstop 25 & 15 sion. Joining methods of Everdure Waterstop is by a near firm
butt join and then kneading the ends together. Everdure
1.40/1.45 Waterstop RTD series requires a minimum of 75mm cover of
Specific gravity
ASTM D-71 concrete from the edge.
Colour Black
1. Carefully brush off any dust and debris and apply a coat of
Hydrocarbon content Everdure Adhesive to the dry concrete surface where the
47% min
ASTM D-297 waterstop is to be placed.
Vola�le Ma�er 2. The Everdure Adhesive provides a dust free, tacky surface to
1% max. improve the adhesion of Everdure Waterstop RTD series to the
ASTM D-6 concrete.
Storage Life Indefinite 3. Using moderate hand pressure with the heel of the hand,
Applica�on temp. range -22°C to 52°C press a continuous bead of Everdure Waterstop RTD series
firmly into position. Check to be certain that the waterstop has
bonded to the primed area.
4. Peel the protective backing from the exposes side of the
Everdure Waterstop RTD series. Butt join and knead the ends
Everdure Adhesive together to form a continuous uninterrupted gasket.
5. Place second pour of concrete around Everdure Waterstop
Adhesion 0.74N/mm2 RTD series making sure that the concrete is properly compact-
ed and vibrated.
Viscosity 5,500-6,500 cps 6. For vertical joints, apply a coat of Everdure Adhesive to the
concrete surface and to the Everdure Waterstop RTD series
Solids 46% by weight and allow to tack off before pressing into place.

PACKING:
Density 1.02kg/litre
Everdure Waterstop RTD series includes Everdure Water-
stop 25 and Evedure Waterstop 15 with the following different
packings:
ADVANTAGES:
Everdure Waterstop 25 is supplied in cartons contaning 6
• Built-in delay system to stop premature expansion.
coils. Each coil is supplied in the following size:
• Excellent for applications to rough concrete surfaces.
• 25mm x 19mm x 5m (total 30m) for insitu concrete construc-
• No loss of integrity of waterstop.
tion joints.
• Allows concrete to gain full strength before expansion.
• Everdure Adhesive is supplied in 4 litres cans.
• For use in horizontal and vertical joints.
• Can be bedded into wet concrete.
Everdure Waterstop 15 is supplied in cartons containing 8
• No compaction or displacement problems.
coils. Each coil is supplied in the following size:
• Unaffected by repeated wet and dry cycles.
• 20mm x 15mm x 7.5m (total 60m) for insitu concrete construc-
• Bonds not turn to mush or lose integrity over time in water.
tion joints.
• No on-site welding required as with PVC waterstops.
• Everdure Adhesive is supplied in 4 litres cans.
• Very easy to handle and install.
• No split forming required.
STORAGE:
• Non-toxic and requires no special handling.
Everdure Waterstop RTD series and Everdure Adhesive
should be stored in a dry location, away from excess heat and
cold. Shelf life is at least one year in original, unopened pack-
ing.
INSTALLATION:
Everdure Waterstop RTD series is to be adhered to the
HEALTH & SAFETY:
previous concrete pour with Everdure Adhesive. A clean
This product is hazard-free, though consumption is not
surface, free from dust, debris, etc. is required.
advised. As a standard precaution it is best kept away from
children.

APPLICATION: CONTACT CEMENTAID FOR SUPPLY AND APPLICATION SERVICE