Scribd
Upload
188 views2 pages

INVISTA U4630HSL PA66 Technical Data Sheetv2

Uploaded by

Lucas Valentim Mendes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
188 views2 pages

INVISTA U4630HSL PA66 Technical Data Sheetv2

Uploaded by

Lucas Valentim Mendes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRODUCT INFORMATION

INVISTA U4630HSL
PA66 Resin
Product Description
INVISTA U4630HSL is a heat-stabilized, lubricated PA66 resin in natural color. The heat stabilizer system
has been designed to provide excellent property retention in high temperature applications. It is lubricated
internally and externally.

Properties (dry) Value Units Method

RV in formic acid, nominal 46 –– ASTM D789


VISCOSITY

VN at 0.5% in sulfuric acid, nominal 147 mL/g ISO 307

VN at 0.5% in formic acid, nominal 134 mL/g ISO 307


RV at 1% in sulfuric acid, nominal 2.65 ––
––

Density 1.14 g/cm3 ISO 1183


Mold Shrinkage, 2.0 mm, Parallel 1.8 % ISO 294-4
PHYSICAL

Mold Shrinkage, 2.0 mm, Transverse 1.7 % ISO 294-4

Water Absorption - 24 hours 1.7 % ISO 62

Water Absorption - Equilibrium @ 50% RH 2.6 % ISO 62


Tensile Strength at Yield 84 MPa ISO 527

Elongation at Yield 4.4 % ISO 527

Elongation at Break 30 % ISO 527


Tensile Modulus 3100 MPa ISO 527
MECHANICAL

Flexural Modulus 2900 MPa ISO 178

Flexural Strength 94 MPa ISO 178


Notched Charpy at 23°C 5.0 kJ/m2 ISO 179

Notched Charpy at -30°C 4.2 kJ/m2 ISO 179


Unnotched Charpy at 23°C NB kJ/m2 ISO 179
Unnotched Charpy at -30°C NB kJ/m2 ISO 179
Notched Izod at 23°C 5.0 kJ/m2 ISO 180

Melting Temperature, 10°C/min 261 °C ISO 11357


HDT at 0.45 MPa 185 °C ISO 75
THERMAL

HDT at 1.80 MPa 62 °C ISO 75


CLTE, 2.0 mm, Parallel, 23 - 55 °C 0.9 10-4/°C ISO 11359
CLTE, 2.0 mm, Transverse, 23 - 55 °C 0.9 10-4/°C ISO 11359

nylonpolymer.invista.com Issue date: April 2021


Properties (dry) Value Units Method

Dielectric Strength, 1.0 mm 18 kV/mm UL 746A


ELECTRICAL

Comparative Tracking Index, 3.0 mm 600 volts IEC 60112

High Voltage Arc Tracking Rate (HVTR) PLC 0 ‒‒ UL 746A


High Volt, Low Current Arc Resistance PLC 5 ‒‒ UL 746A
Flame Rating at 0.40 mm V-2 –– UL 94

Flame Rating at 0.71 mm V-2 –– UL 94


Flame Rating at 1.5 mm V-2 –– UL 94
FLAMMABILITY

Flame Rating at 3.0 mm V-2 –– UL 94


Glow-Wire Flammability at 0.71 mm 960 °C IEC 60695
Glow-Wire Flammability at 1.5 mm 960 °C IEC 60695

Glow-Wire Flammability at 3.0 mm 960 °C IEC 60695

Glow-Wire Flammability at 3.0 mm 960 °C IEC 60695

General Information Process Guidelines for Molding


Material Status Drying temperature 80 °C
Commercial: Active
Drying time* 3 - 4 hours

Availability Barrel temperatures

• North America Rear 250 - 270 °C

• South America Middle 270 - 290 °C

• Europe Front 270 - 290 °C

• Asia Nozzle 270 - 290 °C

Features Processing temperature (melt) 280 - 295 °C

• Excellent property retention at elevated temperatures Mold temperature 50 - 90 °C

Back pressure** 2 - 10 bar


• Improved flow and processability
Vent depth 0.007 - 0.04 mm
Classification
Cushion (range) 4 - 6 mm
ASTM D4066 classification PA0121
Suggested moisture (max) 0.20 wt%
RoHS
Suggested moisture (min) 0.10 wt%
No intentional additives or ingredients used in
U4630HSL are among those in the European directive Screw speed 75 - 180 rpm
2011/65/EC (RoHs), as amended. * Initial moisture below 0.25 wt%. Use dehumidified air.
** Melt pressure

Product Data Sheet Disclaimer


This Product Data Sheet relates only to the identified product and any identified uses. It is based on information available as of April 2021. Additional information may be needed to evaluate
other uses of the product, including use of the product in combination with any materials or in any processes other than those specifically referenced. THIS PRODUCT DATA SHEET DOES NOT
CONTAIN A COMPLETE STATEMENT OF, AND DOES NOT CONSTITUTE A REPRESENTATION, WARRANTY OR GUARANTY WITH REGARD TO, A PRODUCT’S CHARACTERISTICS, USES, QUALITY,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR THE SUITABILITY, SAFETY, EFFICACY, HAZARDS OR HEALTH EFFECTS OF THE PRODUCT, WHETHER USED SINGULARLY OR IN
COMBINATION WITH ANY OTHER PRODUCT, EXCEPT TO THE EXTENT REQUIRED BY THE RELEVANT LAW AND REGULATIONS. Nothing contained in this Product Data Sheet shall be construed to
modify any of the terms under which the product was sold by INVISTA. INVISTA and design are trademarks of INVISTA. ©2021 INVISTA.
www.nylonpolymer.INVISTA.com

nylonpolymer.invista.com Issue date: April 2021

You might also like