Sample Articles
Sample Articles
Sample
Articles
Your free
copy
ChemistryViews.org
is a comprehensive free-to-view news and information site with an associated scientific
magazine, ChemViews Magazine. It is provided by ChemPubSoc Europe, an organization of
16 European chemical societies, to the global chemistry community.
Sample Articles
DOI: 10.1002/chemv.201600022
This small modest molecule has been the subject of a lot of attention over the past years as to what
the bonding situation is between these two atoms, as can be seen from the selection of references
given here [1–8]. To put it in very simple terms, there appear two main theories—a quadruple bond
and not a quadruple bond (in fact somewhere in between two and three bonds). In the latest issue of
Chemistry—A European Journal, four groups put forward arguments in favor of one or other of these
two theories [9–12].
Dr. Anne Deveson has asked the main authors of these four papers, Professor Dieter Cremer
(Southern Methodist University, Dallas, TX, USA), Professor Gernot Frenking (Marburg University,
Germany), Professor Mario Piris (Euskal Herriko Unibertsitatea, Donostia, Spain), and Professor Sason
Shaik (The Hebrew University, Jerusalem, Israel), to tell us why this is so important.
Mario Piris: The carbon atom has four valence electrons and four valence orbitals. Consequently,
carbon could unpair these four electrons by putting each one in a different valence orbital, or in each
of the resulting four sp3 hybrid atomic orbitals. The pairing of each of the electrons of two adjacent
carbon atoms could, in principle, result in a quadruply bonded dimer. However, the quantum
mechanics of the molecular electronic structure puts in place other (subtle) effects that might result
in a reduced bond order. Indeed, we found that C2 bears a bond order intermediate between
ethylene and acetylene. […]
DOI: 10.1002/chemv.201500104
Within the Rosetta mission of the European Space Agency (ESA), Darmstadt, Germany, the Philae
lander made the first soft landing on a comet nucleus by touching down on comet 67P/Churyumov-
Gerasimenko in 2014. Philae carried out eleven experiments.
Comets largely consist of condensed ices and dust and circle the sun on elliptical orbits. They are
remnants of the birth of our solar system and are therefore important witnesses from ancient times.
Professor Uwe Meierhenrich, University of Nice Sophia Antipolis, France, is known for his research on
the identification of amino acids in space and was involved in the preparation and realization of the
Rosetta mission.
DOI: 10.1002/chemv.201500036
It is well known that light can behave as a particle and as a wave, but it took until 2015 to capture
this dual behavior of light simultaneously in an image [1].
Fabrizio Carbone and his team at the École polytechnique fédérale de Lausanne (EPFL), Switzerland,
fired a pulse of infrared laser light at silver nanowires, which were located on a layer of multilayered
graphene. The laser light stimulated electronic plasma oscillations in the nanowires, as it adds energy
to the charged particles in the nanowire, thus causing them to oscillate. This electromagnetic far field
is accompanied by an electromagnetic near field located directly on the wire surface. Light travels
back and forth on the nanowire. When waves traveling in opposite directions meet, they form a
standing wave.
To image this standing wave of light, the scientists shot a stream of electrons close to the nanowire.
As the electrons interacted with the confined light on the nanowire, they either sped up or slowed
down. By using an ultrafast microscope, Carbone’s team imaged the position where this change in
speed occurred. By doing this they were able to visualize the standing wave, which acts as a
fingerprint of the wave-nature of light.
At the same time, this phenomenon shows the particle-like character of light: As the electrons pass
close to the standing wave of light, they hit the photons. This affects their speed, and this change in
speed appears as an exchange of energy packets, called quanta, between electrons and photons. […]
The international chemical industry has seen a slow recovery according to the latest Facts & Figures
report [1] by the European Chemical Industry Council (cefic).
The value of worldwide chemicals sales in 2013 was 3,156 billion €, an increase of 2.4 % compared to
the previous year. This was mostly driven by China, where chemicals sales swelled from 918 billion €
in 2012 to 1,047 billion € in 2013. The European Union and the United States had very similar total
chemicals sales in 2013 and share the second rank. […]
(EU = EU-28, NAFTA = North American Free Trade Agreement, excluding pharmaceuticals, [1])
DOI: 10.1002/chemv.201400093
Dr. Marc Fricke, laboratory head for Advanced Materials & Systems Research, BASF Polyurethanes
GmbH, Lemförde, Germany, has developed a novel type of aerogel, which will be offered as an
extremely thin and mechanically strong insulating panel, together with his team. It shows exceptional
insulation performance, is light, has moisture-regulation performance, and will be produced as an
aerogel panel that is easy to apply.
The material is an organic aerogel based on polyurethane chemistry that shows an interesting
combination of properties. This includes not only very low thermal conductivity – the λ value is quite
low – but in addition it is a strong panel, and it is water vapor diffusive. Owing to its open-porous
structure, it can absorb water or water vapor condensates within the nanopores, and it can release
the water again. This makes it especially interesting for construction materials, especially for
insulation applications. We can fine-tune the properties by using its chemistry.
And you are going to present this at the aerogel workshop at the TU Harburg?
Yes, I am looking forward to the academic discussion during this workshop organized by Professor
Smirnova where the who's who of the chemical as well as the process engineering aerogel […]
DOI: 10.1002/chemv.201500106
Microalgae, as one of the most important global biomass producers, do not only largely contribute
to our global oxygen production, they are also able to produce several high value compounds with a
high nutritional value. Next to natural antioxidant colorants, microalgae can contain high amounts of
protein and omega-3-fatty acids which may help to prevent heart diseases. On the other hand,
microalgae produce oil which might be a future fuel. Nevertheless, there is still a lot of research to do
to make these things profitable.
DOI: 10.1002/chemv.201200074
Column chromatography is a commonly used purification technique in labs across the world. Done
right it can simply and quickly isolate desired compounds from a mixture. But like many aspects of
practical chemistry, the quick and efficient setting up and running of a column is something that can
take years to master. Here we present some of the tips and tricks of the trade to help you optimize
all the experimental parameters to get the best separation of your compounds.
Columns are generally used in organic and inorganic labs to remove unreacted starting material or
isolate one desired product from a range of by-products after a reaction has been performed. To do
this, the mixed sample is passed down a vertical glass tube packed with silica or alumina and
collected in small portions, or fractions, at the end. The various components of the sample are
separated into their different compound types through interaction with the solvent and the silica.
Polar compounds will interact with the silica more strongly than non-polar ones so will come off the
column, or elute, after non-polar compounds. When a sample contains compounds with similar
polarity, the separation between then can be small and recovering all of your clean sample can
become a challenge.
While correctly packing your column is arguably the most important experimental factor, there
remain several other factors that can be optimized to help you achieve the best separation possible
in the shortest amount of time. Here we guide you through how to choose the best solvent system
for your sample, and look at how much silica you will need and in which size column. […]
DOI: 10.1002/chemv.201500057
ChemistryViews.org and the Career Service of the Gesellschaft Deutscher Chemiker (GDCh, German
Chemical Society) asked international companies what they expect from applications, for example,
for an entry-level position.
Dr.-Ing. Karin J. Schmitz, Career Service of the GDCh, and Dr. Vera Koester, ChemistryViews.org,
talked with Peer Elger Schotmann, Global Executive Recruiting at Merck KGaA.
Firstly, a CV should contain personal information such as name, address, contact details, etc. as well
as hobbies, community activities, and association memberships. The latter is optional to show your
extracurricular/avocational activities. Of course, your educational background needs to be included:
what/when/where you studied, which degree and what grades you achieved.
Graduates should also include when/where/with which majors/which degree school their education
was completed. The career background should be included as well, starting with the most recent
employment and its start/end date, the name of the employer, the job title, and job description in
bullet points. Don't forget to add your language skills!
DOI: 10.1002/chemv.20130001
Everywhere you can read about the shale gas rush in North Dakota, Texas, and Montana, all USA.
The USA is the largest producer of shale gas. Their shale gas production rose from 2000 to 2010 from
2 to 23 % overall gas production with the trend still rising [1].
How do hydraulic fracturing (fracking) and horizontal drilling make natural gas trapped in shale rock
formations financially feasible and accessible?
Shale Gas
Shale is a compressed fine-grained type of sedimentary rock. It was formed from mud silt, clay, and
organic matter.
Shale gas is natural gas trapped within tiny pore spaces in shale formations. It is a hydrocarbon gas
mixture. It consists mainly of methane. Other hydrocarbons are natural gas liquids (NGLs) like
ethane, propane, and butane, and it also contains carbon dioxide, nitrogen, and hydrogen sulfide.
Horizontal drilling allows drilling vertically several thousand meters (typically 6,000 m) deep and then
turning 90 ° and drilling horizontally. […]
[…]
Read more on ChemistryViews.org
DOI: 10.1002/chemv.201600004
The leading team of the Austrian Chemical Society's (GÖCH) Young Chemists Division consists of
seven former student council members from the University of Innsbruck: Simon Albertini, Emanuel
Ehmki, Stefan Felderer, Simon Hofer, Veronika Huber (chairwoman), Elisabeth Mairhofer, and Martin
Wieser. The team started its work in 2013, and aims to build a larger network covering other Austrian
universities, as well as represent the interests of young chemists towards GÖCH, the chemical
industry, and the public.
Simon Hofer
In my opinion, our biggest achievement during our work in the student's council was to bring people
together and to establish a new identity of chemistry students in Innsbruck. […]
DOI: 10.1002/chemv.201000074
How can a tiny molecule like ethanol be at the root of so much human misery?
Here we propose to get to the bottom of the chemical consequences of a night of celebrating to
excess.
Many of us know from painful experience how the over-enjoyment of alcohol can disagree with our
systems. Nevertheless, the tendency persists, over and over again, to suppress this simple bit of
wisdom. The typical symptoms: after a short period of lifted inhibitions, accompanied by increasingly
childish tomfoolery, usually serious problems with speech follow. Continuing to imbibe further leads
to confusion and loss of orientation, as well as an inability to move the extremities in a coordinated
fashion. The state of complete inebriation produces total helplessness from a fully impaired sense of
equilibrium.
It‘s true that all the alcohol consumed will be completely metabolized within 8–12 hours, but the
physical effects last longer. There arises what is colloquially referred to as a “hangover”, or
“veisalgia” in medical terminology. The latter is in turn a word derived from the Norwegian “kveis”,
for indisposition brought on by intemperance, and the Greek “algia” for pain. Typical symptoms
include nausea, vomiting, equilibrium problems, general weakness, lack of appetite, dry mouth, etc.
Given that the ethanol culprit has already been metabolized by the time the first symptoms of a
hangover appear, the question naturally arises: What is it that actually tortures us to the point […]
DOI: 10.1002/chemv.201300114
A recreational vehicle (RV) breaks the silence of the New Mexico desert. The driver, wearing only
his underpants and a gas mask and showing signs of middle-age spread, steers it crashing into the
embankment. The door bursts open, the driver falls out and, cursing, rips the gas mask from his face:
Walter H. White, 50 years old, glasses and a highly talented scientist who is increasingly disillusioned
in his work at a High School in Albuquerque. To help his family make ends meet, Walter is forced to
take on a side job working at a car wash.
Walter H. White: hero or anti-hero? Driving force or driven by other forces? Chemist! Welcome to
Breaking Bad.
Walter H. White is the protagonist of the multi-award-winning American TV series Breaking Bad,
which runs for a total of five seasons and is especially popular among young audiences.
At the beginning of the series, he is diagnosed with lung cancer and, in face of his seemingly
unavoidable and imminent death, he searches for a way to establish financial security for his heavily
pregnant wife, Skyler, and his handicapped son, Walter Jr. On hearing how much money can be made
in the narcotics business, he accompanies his brother-in-law, Hank Schrader, who works for the DEA
(Drug Enforcement Agency) on a raid. He recognizes his former student, Jesse Pinkman, fleeing the
scene.
With a mixture of cool calculation and pure desperation, Walter decides to get involved in the
narcotics business and to synthesize crystal meth (N-methylamphetamine) to a very high quality. […]
The scientist we are looking for this time made important contributions to protein chemistry, for
which he or she received high honors. During college, our chemist was not entirely focused on
academics, but also played on the football team. […]
Fun
In time for the European soccer championship in Poland and Ukraine, ChemistryViews gives you an
overview of some of the scientific aspects involved in a football game. […]
Regularly updated details about awards and prizes with open nominations
Events
Event Calendar
http://www.chemistryviews.org/
events
Writing Tips
http://bit.ly/2BwPGaL
Explaining scientific principles in simple and understandable language is a valuable skill: Insider tips
on taking care of what you write
Videos
Carbonate Looping
Elmar Zimmermann, Vera Köster
(Video Editing: Lynsey Geldeard)
DOI: 10.1002/chemv.201400036
The Carbonate Looping technology as a post-combustion process has been identified as one of the
most promising approaches to capture CO2 from power plants at reasonable expenses. It can be
integrated into existing power plants and, thus, is seen as a milestone towards CO2-free power
plants.
In this short video, Professor Bernd Epple, Technical University Darmstadt, Germany, gives an
introduction into the technology and shows the pilot plant which the Institute for Energy Systems
and Energy Technology of the Technical University in Darmstadt has run for more than 1000 hours.
[…]
DOI: 10.1002/chemv.201700072
Your questions about article transfer answered: How does it work? How easy is it? What do I have
to do? What does the editor do? How do I benefit—as an author and as a referee? […]
Editorial Team