HENSOTHERM® | HENSOmastik®

Fire Protection Systems

actured in Börns
nuf en
ma n
d
n

ea
da

rH

Brandschutz-Beschichtungen
ope

am

Fire Protection Coatings

Devel

burg
•

•
urg
E nt w

Rudolf Hensel GmbH

M iackelt

de
mb

Lack- und Farbenfabrik

an

in G er m
Ha

un b
ei

dh n
erg se
e örn
ste llt i n B
Fire Protection Systems
Structural Steel

zk5agg 3E4MHK
APPROVED
CF 5678

HENSOTHERM® 410 KS R 30 – R 90 HENSOTHERM® 421 KS R 90 – R 120 HENSOTHERM® 461 KS R 30 – R 90

• Intumescent fire protection coating for indoor use • Intumescent fire protection coating for indoor use • Intumescent fire protection coating for indoor use
• Classified according to EN 13501-2 Giscode: M-DF01 • Classified according to EN 13501-2 Giscode: M-DF01 • Tested according to BS 476 Giscode: M-DF01
•  TA-No. 11/0481
E •  TA-No.16/0251
E •  ertifire certificate No. CF 5678
C
• CE-marking according to 93/68/EWG • CE-marking according to 93/68/EWG • Monitored by independent third party institutes

• Monitored by independent third party institutes • Monitored by independent third party institutes
•  ater-based coating systems, free from halogens, APEO,
W
• DGNB Navigator: ZK5AGG • DGNB Navigator: 3E4MHK
borates, free from fibres and plasticizers, Non-VOC ac-
•  PD-RHG-20140057-IAA1-DE
E •  PD-RHG-20140057-IAA1-DE
E cording to ISO 11890-2, LEED v4 confirmed
• Water-based coating systems, free from halogens, APEO, • Water-based coating systems, free from halogens, APEO, • Product is classified to VOC-emission class A+

borates, fibres and plasticizers, Non-VOC according to borates, and plasticizers, Non-VOC according to ISO
•  uitable also for use on galvanized profiles
S
ISO 11890-2, LEED 11890-2, LEED v4 confirmed
• High efficiency due to low material consumption/low
• Product is classified to VOC-emission class A+ • Product is classified to VOC-emission class A+
coverage rates and fast drying times; maintenance-free
• Assessed also for use on galvanized profiles • Assessed also for use on galvanized profiles
• 1c- and 2c-top coats available
• High efficiency due to low material consumption/low • High efficiency due to low material consumption/low
coverage rates and fast drying times; maintenance-free coverage rates and fast drying times; maintenance-free • Packaging: 25 kg plastic pails
• 1c- and 2c-top coats available • 1c- and 2c-top coats available
• Packaging: 25 kg plastic pails • Packaging: 25 kg plastic pails

APPROVED APPROVED
CF 5344 CF 5650

HENSOTHERM® 471 KS R 15 – R 180 HENSOTHERM® 490 KS HENSOTHERM® 910 KS R30–R60

• Intumescent fire protection coating for indoor use • Intumescent fire protection coating for indoor use and • Approved according to EN 13501-2  Giscode: RE 1
semi-exposed conditions
• Tested according to BS 476 Giscode: M-DF01 • Classified according to BS 476, Certifire No. CF 5650
• Tested according to UL 263 Giscode: M-DF01
• Certifire certificate No. CF 5344 • Tested acc. to ETA No. 16/0834
•  onitored by independent third party institutes
M •  L online certification directory file: CDWZ.R27201
U
• Environmental product declaration: applied for
• Design NOs D987, N638, Y627, Y628
•  ater-based coating systems, free from halogens, APEO,
W
• Monitored by independent third party institutes • Application area: for indoor and outdoor use on open
borates, and plasticizers, Non-VOC according to ISO
• EPD, UL No. 4787852008.101.1 and hollow sections
11890-2, LEED v4
• EPD, IBU No. EPD-RHG-20160139-IAA1-EN
• Product is classified to VOC-emission class A+ • Assessed also for use on galvanized profiles
•  ater-based coating system, free from halogens, APEO,
W
•  uitable also for use on galvanized profiles
S •  ow-VOC, free of halogens, free of alkylphenol and
L
borates and plasticizers, Non-VOC according to ISO
• High efficiency due to low material consumption/low benzyl alcohol, plasticiser free = no TiBP!
11890-2, LEED confirmed
coverage rates and fast drying times; maintenance-free
• AgBB-tested, VOC-emission class A+
•  ire resistance rates up to 5.5 hours on open steel
F
• 1c- and 2c-top coats available
profiles and 3.5 hours on hollow sections • 100 % solvent free 2c epoxy fire protection coating
• Packaging: 25 kg plastic pails • Suitable also for use on galvanized profiles

• High efficiency due to low material consumption/low

• 2c-top coat available
coverage rates and fast drying times; maintenance-free •  erfect solution for workshop coatings or on-site
P
• Smooth surface due to low coating thicknesses application
• Suitable also for shop application

• Packaging: 25 kg plastic pails

Sustainable and enviromentally friendly NO VOC-emissions MINIMAL VOC-emissions

Structural Steel Electrical Cables

APPROVED CDDWRA
CF 700

HENSOTHERM® 310 KS HENSOMASTIK® 5 KS HENSOTHERM® 7 KS Gewebe 1000

HENSOTHERM® 370 KS Cables
• I ntumescent fire retardant fabric coated with
• Indoor and outdoor use • Ablative fire protection coating system for use on ­HENSOTHERM® 7 KS for covering of horizontal oriented
horizontal and vertical oriented electrical cables electrical cables, trays and holders
• Approved according to EN 13501-2 Giscode: BS60
• ETA 16/0369
•  uthorization/certification: Test Report nkt cables,
A
• 310 KS: Tested according to ETA No. 11/0456 • Monitored by independent third party institutes
2006-12-14, 90 min., MPRXCX > 3x4 mm² / DNV GL
• Giscode: M-DF01
• 370 KS: Classified according to BS 476, Certifire No. CF 700 TAE00001K2, IEC 60331-21, IEC 60332-3 cat. A /
FM Approvals project ID: 3018997 •  ater-based, free from halogens, APEO, borates, fibres
W
• I-sections and hollow sections, R 30 – R 60 / R 30 – R 120
•  onitored by independent third party institutes
M and plasticizers, Non-VOC according to ISO 11890-2,
• Assessed also for use on galvanized profiles • DGNB Navigator: CDDWRA  Giscode: M-DF01 LEED confirmed
• Product is classified to VOC-emission class A+
• Single pack thin film solvent-based • Water-based, impermeable to water according to DIN
• Free from borates 1048, free from halogens, APEO, borates and plasticizers, •  rea of application: covering horizontal oriented
A
Non-VOC according to ISO 11890-2, LEED confirmed electrical cables, trays and holders
•  op coat available in RAL or NCS colour shades and
T • Product is classified to VOC-emission class A+ • Carrier material: glass filament fabric,
special shades on request non-inflammable – A2
•  esistant to mechanical stress, oil and petrol spills,
R • Flexible for use in tightest windings
ageing and after through drying temperature-resistant • Durability classes: X/Y2/Z1/Z2
down to -40 °C • Fire resistance rate: up to 90 minutes
• Also flexible in higher dry film thicknesses

• Packaging: 12,5 kg and 25 kg plastic pails

Electrical Cables and Pipes Penetration Seal Systems

HENSOTHERM® 7 KS viskos HENSOTHERM® 7 KS viskos HENSOMASTIK® 5 KS Farbe

for flexible pipes up to 240 minutes for Mixed Penetration Seal System EI 60
•  ire resistant intumescent acrylic compound designed
F
to seal cables and non combustible pipes; expands in • Approved according to EN 1366-3 • Ablative fire protection coating system for bulkheading
case of fire; indoor and outdoor use penetrations of cables and pipes in walls and ceilings
• ETA: tested
• Tested according to EN 1366-3 classified according to EN 13501-2 EI 60
• Monitored by independent third party institutes • For indoor and outdoor use • For indoor and outdoor use

• Giscode: M-DF01
•  esigned to seal combustible and non-combustible
D • Tested in accordance to ETAG 026-2 / EN 1366-3
• W ater based, free from halogens, APEO, borates and plasti- pipes, electrical cable bundles and electric cables
• 
ETA-No. 15/0294
cizers, non-VOC according to ISO 11890-2, LEED confirmed in flexible conduits
• CE-marking according to 93/68/EWG
• Product is classified to VOC-emission A+
• Application areas: • Giscode: M-DF01

• Area of application: seals gaps or openings for single In solid walls ≥ 100 mm and ceilings ≥ 150 mm
•  ater-based, free from halogens, APEO, borates and
W
conduits in solid concrete floors and walls and light-
• Fire resistant rate up to EI 240 plasticizers, Non-VOC according to ISO 11890-2, LEED
weight partition walls > 100 mm thickness
confirmed
• Easy and fast installation • Product is classified to VOC-emission class A+
•  olour: greyish black
C
• Easy to handle, can be overcoated • Packaging: 310 ml cartridge, 600 ml tubular bag • Packaging: 12,5 kg plastic pails
• Packaging: 310 ml cartridge, 600 ml tubular bag

Fire Protection Systems | Rudolf Hensel GmbH 01/20 For further information please visit our website www.rudolf-hensel.com
Wooden Building Materials

PMX99N

HENSOTHERM® 1 KS INNEN HENSOTHERM® 2 KS INNEN weiss HENSOTHERM® 2 KS AUSSEN

• Intumescent transparent fire protection coating for • Intumescent fire protection coating / indoor use • Ablative fire protection coating / outdoor use
indoor use • C lassifies solid wood and wooden materials as hardly • C lassifies solid wood and wooden materials as hardly
• Classifies solid wood and wooden materials as hardly combustible B1 combustible
combustible B1
•  lassified according to EN 13501-1 (SBI-test)
C •  lassified according to EN 13501-1 (SBI-test)
C
• Classified according to EN 13501-1 B-s1, d0
• M onitored by independent third party institutes •  iscode: M-DF01
G
•  onitored by independent third party institutes
M • G iscode: M-DF01 •  ynthetic resin, light grey
S
• Giscode: M-KH01 • D ispersion
•  ree from organic solvents and plasticizers
F
• Synthetic resin, transparent • DGNB Navigator: PMX99N

•  rea of application: on wood based or solid wood core

A
•  ree from halogens, APEO, borates, fibres
F • F ree from halogens, APEO, borates, fibres
boards and on wooden composite boards (usage category 3)
and plasticizers, free from formaldehyde, Non-VOC and plasticizers, Non-VOC according to ISO 11890-2,
 ood adhesion, smooth surface
• G
according to ISO 11890-2, LEED confirmed LEED confirmed
 op coat available in RAL or NCS colour shades and on
• T
• Product is classified to VOC-emission class A+ • Product is classified to VOC-emission class A+
request in individual colour shades
• Area of application: solid wood, thickness •  rea of application: solid wood, thickness ≥ 12 mm /
A
• P
 ackaging: 6 kg, 12,5 kg, 25 kg plastic pails
≥ 12 mm / particle boards, thickness ≥ 12 mm / plywood particle boards, thickness ≥ 12 mm / plywood for con-
for construction, thickness ≥ 12 mm struction, thickness ≥ 12 mm
• Protect against mechanical stress • Protect against mechanical stress

• Aromatics-free top coat, matt/silk-matt • Top coat, silk-matt; available in RAL or NCS colour

shades and on request in individual colour shades

• Packaging: 6 kg, 12,5 kg, 25 kg plastic pails
• Packaging: 6 kg, 12,5 kg, 25 kg plastic pails

Penetration Seal Systems

HENSOMASTIK® 5 KS Farbe HENSOTHERM® 7 KS Gewebe 50 HENSOTHERM® RM 50 pipe collar

for Mixed Penetration Seal System EI 90 / EI 120 Fire protection solutions for single conduits
• Classified according to EN 13501-2 Giscode: M-DF01
• Ablative fire protection coating system for bulkheading • Tested according to EN 1366-3
penetrations of cables and pipes in walls and ceilings • ETA No. 18/0417
• ETA No. 19/0730
classified according to EN 13501-2 EI 90 / EI 120 • For indoor and outdoor use up to EI 240
• For indoor and outdoor use • For indoor and outdoor use
• Intumescent pipe wrap (carrier material: glass filament
• Tested in accordance to ETAG 026-2 / EN 1366-3 fabric A2) for sealing for plastic and composite pipes up • Application areas: in walls up to EI 180 and
to Ø 125 mm up in ceilings up to EI 240
•  TA-No. 15/0295
E
• CE-marking according to 93/68/EWG For combustible pipes with a diameter up to 160 mm
• Area of application: flexible walls, solid walls and solid •
• Monitored by independent third party institutes
floors • Easy and fast installation
• Giscode: M-DF01
•  lexible; easy and fast installation; low space require-
F
• W ater-based, free from halogens, APEO, borates and ment due to low installation height
plasticizers, Non-VOC according to ISO 11890-2, LEED
confirmed • Free of solvents, halogens and plasticisers
• Product is classified to VOC-emission class A+

• Packaging: 12,5 kg plastic pails

Sustainable and enviromentally friendly NO VOC-emissions MINIMAL VOC-emissions

Penetration Seal Systems Concrete Structural Elements

HENSOTHERM® System for shaft walls HENSOMASTIK® B 3000 R 30 – R 120 HENSOTHERM® 820 KS R 30 – R 240
Fire protection solutions for shaft walls
• Ablative fire protection coating • Intumescent fire protection coating
•  TA 18/0734 | UL ASSESSMENT REPORT project no.:
E
• Tested according to EN 13381-3:2015 Giscode: M-DF01 • Tested according to EN 13381-3:2015 Giscode: M-DF01
4788658260 Rev.1
• Monitored by independent third party institutes • Monitored by independent third party institutes
• Tested up to fire resistance class EI 90
•  ater-based, free from halogens, APEO, borates, fibres
W •  ater-based, free from halogens, APEO, borates, fibres
W
• Simple installation and assembly
and plasticizers, Non-VOC according to ISO 11890-2, and plasticizers, minimal VOC < 6 g/l, LEED confirmed
• Low cost system LEED confirmed • Product is classified to VOC-emission class A+

• Product is classified to VOC-emission class A+

• Indoor and wet rooms • Indoor use only
• Indoor and outdoor use, in areas with high emission • Fire protection coating system for concrete hollow core
• Free of solvents and silicone, VOC emissions class A+
exposure e.g. underground car parks slabs (2012-Efectis-R0556 [Rev1]), concrete floors and
• Fire protection coating system for concrete beams and walls (Exova WF-Report No. 339814), concrete beams
columns (Exova WF-Report No. 339818), and columns (Exova WF-Report No. 339816),
ripped concrete slabs on request ripped concrete slabs on request
• Impermeable according to DIN 1048 • In combination with BETON-CARBONSPERRE protection

• Resistant to oil and petrol spills against penetration of harmful substances

• Weatherproof/UV resistant according to DIN 53 384 • Smooth surface

• In combination with BETON-CARBONSPERRE protec- • High efficiency through low material consumption

tion against penetration of harmful substances • Easy to handle, maintenance-free

• Colour shade: white, approx. RAL 9010 • No spalling by subsequently wall breakthroughs or

installations
• Packaging: 25 kg plastic pails
• Colour shade: white, approx. RAL 9010

• Packaging: 25 kg plastic pails

Fire-resistant Joints Special Adhesive

CDDWRA

HENSOMASTIK® 5 KS Farbe HENSOTHERM® Spachtel universal HENSOMASTIK® K 2000

Joints | membrane Joints Flexible special adhesive
• A
 blative fire protection coating/ indoor and outdoor use •  ire resistant intumescent acrylic compound;
F • Indoor use
• T
 ested according to EN 1366-4 in conjunction to EN 1363-1 foams in case of fire; indoor and outdoor use
• C
• Special adhesive/glue
 lassification report: KB 3.2/12-275-2 • Tested according to EN 1366-4
• M
 onitored by independent third party institutes • Classification report: KB 3.2/12-275-4Ä •  onding and fixing of building materials with different
B
• G
 iscode: M-DF01 • Monitored by independent third party institutes coefficients of expansion
• Giscode: M-DF01
• D
 GNB Navigator: CDDWRA •  lassified as A2-s1, d0 according to EN 13501-1,
C
• E
 PD-RHG-20140204-IAA1-DE •  ater based, free from halogens, APEO, borates and
W classification according to UNE 23721: class M1
• W
 ater-based, free from halogens, APEO, borates and plasti- plasticizers, non-VOC according to ISO 11890-2, LEED • Fulfills the requirements of R1 HL3 according to
cizers, Non-VOC according to ISO 11890-2, LEED confirmed confirmed EN 45545-2:2013; Exova Warringtonfire Test Report
• P
 roduct is classified to VOC-emission class A+ • Product is classified to VOC-emission A+ No. 2014-2265-1
• A
 reas of application: joints in ceilings max. 100 mm wide • Area of application: filling joints in borders, walls and • Free from solvents, VOC < 1 g/l
up to F 90, membrane max. 100 mm wide up to EI 90 and floors up to 7,5 cm width up to R 120 in areated con-
• Organic, permanent elastic
higher, between concrete and/or masonry or aerated crete, concrete, reinforced concrete, sand-lime bricks
concreted and brickwork in accordance to EN 1366-4 on floors •  eady for spraying or also available viscous for applica-
R
• W
 eatherproof / UV-resistant, impermeable to water from > 125 mm and walls > 100 mm / EI 120 up to joint tion by trowel or spatula
• R
 esistant to oil and petrol spills and ageing width 40 mm / EI 90 up to joint width 75 mm / tested up
• V
 iscoplastic at high layer thickness after drying to 12,5 % joint expansion
• Colour: greyish black
• P
 ackaging: 12,5 kg plastic pails
• Easy to handle, can be overcoated

• Packaging: 310 ml cartridge

Fire Protection Systems | Rudolf Hensel GmbH 01/20 For further information please visit our website www.rudolf-hensel.com
Rudolf hensel gmbh
Lack- und Farbenfabrik
Picture credits: Rudolf Hensel GmbH

Lauenburger Landstraße 11 ISO 9001

© Rudolf Hensel GmbH 01/20

21039 Börnsen | Germany

Tel. +49 40 72 10 62-10 Technical Support / Sales

Fax +49 40 72 10 62-52 Tel. +49 40 72 10 62-48

E-Mail: [email protected]
Internet: www.rudolf-hensel.com