Smart Energy Center

Active Safety Higher Yields Battery Ready Flexible Communication

AI Powered Up to 30% More Energy Plug & Play battery interface 1 WLAN, Fast Ethernet, 4G
Active Arcing Protection with Optimizer Communication Supported

Efficiency Curve Circuit Diagram

Efficiency [%]
DC
Switch
100.00%
PV1+

DC/AC Output
95.00% PV1- EMI Converter Isolation Relay
Filter
PV2-
L1
90.00% PV2+
Output EMI L2
Filter Filter
85.00% L3
SPD
N
80.00% BAT+ PE
BAT-
5% 10% 20% 30% 50% 100% SPD

600V 285V 850V

Load [%] SUN2000-5/6KTL-M1

*1. Will be compatible with HUAWEI smart string ESS in Q1, 2021

SOLAR.HUAWEI.COM
 SUN2000-5/6KTL-M1
Technical Specification
Technical Specification SUN2000-5KTL-M1 SUN2000-6KTL-M1

Efficiency
Max. efficiency 98.4% 98.6%
European weighted efficiency 97.5% 97.7%

Input (PV)
Recommended max. PV power 1 7,500 Wp 9,000 Wp
Max. input voltage 2 1,100 V
Operating voltage range 3 140 V ~ 980 V
Start-up voltage 200 V
Rated input voltage 600 V
Max. input current per MPPT 11 A
Max. short-circuit current 15 A
Number of MPP trackers 2
Max. input number per MPP tracker 1

Input (DC Battery)

Compatible Battery HUAWEI Smart String ESS 5kWh – 30kWh
Cell Technology Lithium-iron phosphate (LiFePO4)
Operating voltage range 600 V ~ 980 V
Max operating current 16A
Max charge Power 10,000 W
Max discharge Power 5,500 W 6,600 W

Output (On Grid)

Grid connection Three-phase
Rated output power 5,000 W 6,000 W
Max. apparent power 5,500 VA 6,600 VA
Rated output voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N+PE
Rated AC grid frequency 50 Hz / 60 Hz
Max. output current 8.5 A 10.1 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤3%

Output （Backup Power via Backup Box-B1）

Maximum apparent power 3,300 VA
Rated output voltage 220 V / 230 V
Maximum output current 15 A
Power factor range 0.8 leading ... 0.8 lagging

Features & Protections

Input-side disconnection device Yes
Anti-Islanding protection Yes
DC reverse polarity protection Yes
Insulation monitoring Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Arc fault protection Yes
Ripple receiver control Yes
Integrated PID recovery 4 Yes
Battery reverse charging from grid Yes
Nighttime Power Consumption < 5.5W 5

General Data
Operating temperature range -25 ~ + 60 °C (-13 °F ~ 140 °F)
Relative operating humidity 0 %RH～100 %RH
Operating altitude 0 ～ 4,000 m (13,123 ft.) (Derating above 2000 m)
Cooling Natural convection
Display LED Indicators; Integrated WLAN + FusionSolar App
Communication RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE; 4G / 3G / 2G via Smart Dongle-4G (Optional)
Weight (incl. mounting bracket) 17 kg (37.5 lb)
Dimension (incl. mounting bracket) 525 x 470 x 146.5 mm (20.7 x 18.5 x 5.8 inch)
Degree of protection IP65

Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P

Standard Compliance (more available upon request)

Certificate EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116
Grid connection standards AS/NZS4777:2015
*1 Inverter max input PV power is 20,000 Wp when long strings are designed and fully connected with SUN2000-450W-P power optimizers.
*2 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
*3 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
*4 SUN2000-5/6KTL-M1 raises potential between PV- and ground to above zero through integrated PID recovery function to recover module degradation from PID. Supported module types include: P-type (mono, poly).
*5 <10 W when PID recovery function is activated

Version No.:04-(20201006) SOLAR.HUAWEI.COM