Multiple Choice Questions

CAD CAM and Automation

Unit 4: Computer Aided Manufacturing

1. MCU of NC machine tool consists of 7. In which machine we get a feedback

A. Controller A. Late machine
B. Tape reader B. NC machine
C. Machine tool C. CNC machine
D. Both A and B D. Milling machine

2. Which of the following is type of Point to point 8. In an NC machining operation, the tool has to be
NC system moved from point (5, 4) to point (7, 2) along a
A. Punching circular path with centre at (5, 2). Before
B. Welding starting the operation, the tool is at (5, 4). The
C. Painting correct G and N codes for this motion are
D. Turning A. N010 GO3 X7.0 Y2.0 I5.0 J2.0
B. N010 GO2 X7.0 Y2.0 I5.0 J2.0
3. Which of the following is type of Point to point C. N010 GO1 X7.0 Y2.0 I5.0 J2.0
NC system D. N010 GOO X7.0 Y2.0 I5.0 J2.0
A. Punching
B. Drilling 9. NC contouring is an example of
C. Painting A. continuous path positioning
D. Spot welding B. point-to-point positioning
C. absolute positioning
4. In which of the following programming method, D. incremental positioning
dimensions are measured w.r.t to fixed point
A. Incremental programming 10. G code for Dwell
B. Absolute programming A. G01
C. Inch mode programming B. G02
D. Metric mode programming C. G03
D. G04
5. NC machine tools are controlled by,
A. Numbers 11. In a CNC program block, N002 GO2 G91 X40
B. Letters Z40……,GO2 and G91 refer to
C. Symbols A. circular interpolation in a
D. All of the above counterclockwise direction and
incremental dimension
6. During the execution of a CNC part program B. circular interpolation in a
block NO20 GO2 X45.0 Y25.0 R5.0 the type of counterclockwise direction and absolute
tool motion will be dimension
A. Circular interpolation – clockwise C. circular interpolation in a clockwise
B. Circular interpolation – anticlockwise direction and incremental dimension
C. Linear interpolation D. circular interpolation in a clockwise
D. Rapid feed direction and absolute dimension

Prof. A. A. Joshi (SIT Lonavala)

12. Numerical control 18. G code for Cutter compensation cancel
A. applies only to milling machines A. G28
B. is a method for producing exact number B. G40
of parts per hour C. G41
C. is a method for controlling by means D. G42
of a set of instructions
D. none of the mentioned 19. In CNC Absolute system command
A. G90
13. Control loop unit of M.C.U is always B. G91
A. A hardware unit C. G92
B. A software unit D. G93
C. A control unit
D. None of the above 20. G code for Feed Per Minute
A. G93
14. CNC machines are not normally operated. They B. G94
are controlled by means of a C. G95
A. Program D. G96
B. Operator
C. Cam 21. Block of Information N indicates
D. Plug board system A. Sequence No
B. Miscellaneous No
15. Which one of the following statements about the C. Preparatory No
programming of NC machines is correct? D. None
A. Programming is only possible on a
central server 22. Machine reference point
B. Programming can be entered on the A. Maximum travel of the machine
control panel and can be read from a B. Could be a tool change point
tape C. Programming start point
C. Modification of the program on the D. None
control panel is not possible
D. Entering the program is only possible 23. Block of Information S indicates
directly on the control panel A. Spindle speed
B. Feed
16. Command G00 Means C. Radius
A. Feed motion in a circular path D. None
B. Rapid Motion
C. Feed motion in Straight line 24. What is the full form of ATC?
D. Slow-motion A. Automatic tool changer
B. Arranged tool changer
17. Return to reference position command is C. Automatic tool controller
A. G28 D. Arranged tool controller
B. G40
C. G41
D. G42
Prof. A. A. Joshi (SIT Lonavala)
25. hat is the meaning of M code? 31. Which type of motor is not suitable for rotary
A. Machining code axis of spindle drives of CNC machine tools?
B. Miscellaneous code A. Stepper motor
C. Master code B. DC servo motor
D. All of the above C. Induction motor
D. Line servo motor
26. n a point-to-point type of NC system
A. Control of position and velocity of the 32. Good slide way system must possess
tool is essential A. Low wear rate
B. Control of only position of the tool is B. High stiffness
sufficient C. Sufficient damping
C. Control of only velocity of the tool is D. All of the above
sufficient
D. Neither position nor velocity need to be 33. A stepper motor
controlled A. Can control the angular displacement
quite precisely
27. The axes of turning machine are B. Cannot control the angular displacement
A. Z and X-axes precisely
B. X and Y-axes C. Cannot be used for positioning of tables
C. Z and Y-axes and tools in CNC machine tools
D. X, Y and Z-axes D. Cannot be readily interfaced with
microprocessor-based controller
28. The most preferred transmission system in CNC
machining center is 34. What is the function of velocity feedback
A. Timing belt and pulley device?
B. V-belt A. Measure speed of the motor
C. Recirculating ball screw B. Measure angular displacement
D. Rack and pinion C. Measure linear displacement
D. None of the above
29. he axis perpendicular to work holding surface of
a CNC machine is 35. How many maximum tools can ATC hold?
A. X A. 60
B. Y B. 80
C. Z C. 90
D. W D. 100

30. An ATC plays a significant role in reducing

A. Tool change time
B. Idle time
C. Machining time
D. Control time

Prof. A. A. Joshi (SIT Lonavala)