0% found this document useful (0 votes)
116 views

Psu650 Manual en Bms

The document provides a user manual for the PSU650 particle monitoring and control device. It includes specifications for particle measurement ranging from 0.3-10um, temperature and humidity monitoring, WiFi and RS485 connectivity, and dimensions of 120x120x70mm. Installation instructions describe attaching the device to walls using magnets or screws and connecting power and communication cables. The user interface has buttons to navigate menus and programs.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
116 views

Psu650 Manual en Bms

The document provides a user manual for the PSU650 particle monitoring and control device. It includes specifications for particle measurement ranging from 0.3-10um, temperature and humidity monitoring, WiFi and RS485 connectivity, and dimensions of 120x120x70mm. Installation instructions describe attaching the device to walls using magnets or screws and connecting power and communication cables. The user interface has buttons to navigate menus and programs.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

PSU650

User Manuar
DOTECH INC. 6F, Joonagang-Ilbo Bldg., 778 Wonsi-Dong, Danwon-Gu, Ansan-Si, Gyeonggi-Do 425-852 Korea
Phone: +82-31-495-3767, Fax : +82-31-495-3917 | www.dotech21.com

※ CAUTIONS
1. This product may cause an electric shock in handling. Please do not attempt to open it with power turned on
2. This product should be installed in a place fixed secured by a rack or panel.
3. This product can be used under the following environmental condition.
① Indoor ②Pollution Degree 2 ③At an altitude of 2000m or below
4. Power input must be within the designated ranges.
5. Please be understood that if this product is dismantled or modified discretionary, after sales service will not be able to be provided
6. In order to prevent it from an inductive noise, please maintain the high-voltage wire and power wire separated
7. Please avoid installing the product in a place where a strong magnetism, noise, severe vibration and impact exist
8 .The sensor wire and signal wire should be away from the power and load wires using conduits separately installed.
9. Please avoid using the product near a device generating strong high frequency noise
(high-frequency welding machine,high-frequency sewing machine, high-frequency radiotelegraph, high capacity SCR controller)
10. Product’s damages other than those decribed in the guarantee conditions provided by the manufacturer shall not be responsible by us
11. If this unit is used to control machineries (Medical equipment, vehicle, train, airplane, combustion apparatus, entertainment, processing and transportation equipment, elevator and various safety
device etc.) enabling to effect on human or property, it is required to install fail-safe device..
※ The Aforementioned precautions must be observed, and if you fail to do so, it may cause a product’s breakdown
※ The specifications, dimensions, and etc. are subject to change for enhancement without a prior notice.

Features Applications
· Particle Monitoring and Control · Semiconductor cleanroom
· Precision measurement · Pharmaceutical company or hospital cleanroom
· 0.3um, 0.5um, 1.0um, 2.5um 5.0um · IAQ(Indoor Air Quality) monitoring and control
6-CH Particle Monitoring
· 268 * 128 mono graphic LCD
· Particle, Temp., Humidity sametime display
· Wi-Fi ( Modbus TCP protocol)
· RS485 modbus RTUcommunication
· Wall mount (bracket or magnetic mount)

-1- R20190917
: Specification

Particle Operation
Operating Operating
Laser scattering -10 ... +60 ℃ ( non condensation )
principle Temperature

Measurement Storage
-20 ... +70 ℃
particle size 0.3um, 0.5um, 1.0um, 2.5um, 5.0um, 10um Temperature
range

Measurement
±15% @25℃
Accuracy
Mechanics
Flow rate 1.0LPM
Housing PC Plastic + Aluminum
Number
concentration 0 ~ 10,000,000 pcs/Liter Dimension 120*120*70 mm
range (W*H*D) (Except Temp., Humidity module and Wi-Fi antenna)

Sampling Weight 550g


1 sec
interval

Start-up time 30sec

Relative Humidity
Measurement
0 ... 100%RH
range

Humidity
±2.0%RH (0 ... 80%RH)
Accuracy

Repeatability ±0.2%RH

Hysterisis < ±1%RH

Humidity
0.01%RH
resolution

Response
< 8sec
time, t63

Long term drift < 0.25%RH/year

Temperature
Temperature
measuring -10 ... +60℃
range

Temperature
±0.3℃ (-10 ... 60℃)
accuracy

Repeatability ±0.2℃

Temperature
0.015℃
resolution

Response
>2sec
time, t63

Long term drift < 0.05℃/year

Long term drift < 0.25%RH/year

Inputs and Outputs


Operating
24Vdc ±10% (DC Adapter plug : inside 2.1, outside 5.5PIE)
voltage

Current
max. 200mA @24Vdc
consumption

Frenqency : 2.4GHz, 5GHz

Standards : 802.11 b,g,n(2.4GHz), 802.11a(5GHz)

Data rate : 1Mbps to 70Mbps


Wi-Fi output
Transmit Power : up to +16dbm (Average)

Receiver sensitivity : -93 to -70dbm @ 25℃, <10% PER

Protocol : Modbus TCP

Digital Output RS485 Modbus RTU

Connector RJ-11 6p4c (Dual)

-2- R20190917
:Odering guide

PSU650 - ① ② Description

A Particle sensor, Humidity, Temperature


① Sensor type
P Particle sensor

W Wi-Fi, RS485
② Output type
R RS485

: Install

□ Communication Connector

1 : Not Used
2 : Shield
3 : TRX-
4 : TRX+
5 : N.C
123456 6 : Not Used

□ Install

Magnet
본체 자석Attachment
부착 Screw
스크루
Attachment
부착
A magnet built into the main product Mounting the wall using the M3 screw
can be attached to the wall of the steel
material.

-3- R20190917
□ Dimensions

<top>

227
157
120

120 71

<left> 125.7 <right>


177
<front>

Dust spout

Temp. Humidity
11.8 Sensor Wi-fi antena
<bottom>
5

Dust Inlet

Power adapter
<rear>
Communication connector

-4- R20190917
: User interface

□ Structure of PSU650

Name Description

PRG Entering a Program

UP Move Up or Increase Value


Button
DOWN Move Down or decrease Value

SEL Select

□ Display Contrast set

0.3 µm PCS
L 0.5 µm PCS
L

20,335 1,982 contrast!


Humidity % Temperature ℃ Humidity

58.61 28.71

Push the same time UP /


DOWN button

UP / DOWN : Contrast set


SEL : Save and Exit

-5- R20190917
: Parameter

□ Parameter set

0.3 µm PCS
L 0.5 µm PCS
L µm

ACCESS CODE
20,335 1,982
Humidity % Temperature ℃ 0000

58.61 28.71

UP / DOWN : password
Push the PRG
button
once

µm
환경설정 µm
환경설정
1.화면설정 1.화면설정
2.기기설정 2.기기설정
3.알람설정 3.알람설정

Push the SEL button


once

UP / DOWN : Menu
SEL : Select menu
PRG : Previous

□ Parameter change

2.기기설정 2.기기설정
▶언 어 : 한 글 ▶언 어 : 한 글
통신주소 : 1 통신주소 : 1
통신속도 : 115.2KBPS 통신속도 : 115.2KBPS
비밀번호 : 0 비밀번호 : 0

UP / DOWN : Move UP / DOWN : Change set


SEL : Select SEL : Save
PRG : Previous PRG : Previous

-6- R20190917
□ Parameter Table

No List Description Unit Step Min. Max. Default


30001 Firmware Version - - 0.1 - - 0.0
MODBUS RTU,
30002 ID - 1 1 247 1
MODBUS TCP/IP
Bit 0: Lower temperature alarm limit ( 1: On, 0: OFF )
Bit 1: Higher temperature alarm limit ( 1: On, 0: OFF )
Bit 2: Lower humidity alarm limit ( 1: On, 0: OFF )
Bit 3: Higher humidity alarm limit ( 1: On, 0: OFF )
Bit 4: 0.3um Higher alarm limit( 1: On, 0: OFF )
30010 Alarm - - - - -
Bit 5: 0.5um Higher alarm limit( 1: On, 0: OFF )
Bit 6: 1.0um Higher alarm limit( 1: On, 0: OFF )
Bit 7: 2.5um Higher alarm limit( 1: On, 0: OFF )
Bit 8: 5.0um Higher alarm limit( 1: On, 0: OFF )
Bit 9: 10.0um Higher alarm limit( 1: On, 0: OFF )
℃ -40.00 125.00
30011 Current Temp. Current Temp. Display 0.01 ℃
℉ -40.00 257.00
30012 Current Humidity Current Humidity Display %RH 0.01 0.00 100.0 %RH
30013 Display Over 0.3um size particle
Particle 0.3um > pcs/L 1 0 999999 -
30014 (Big Endian)
30015 Display Over 0.5um size particle
Particle 0.5um > pcs/L 1 0 999999 -
30016 (Big Endian)
30017 Display Over 1.0um size particle
Particle 1.0um > pcs/L 1 0 999999 -
30018 (Big Endian)
30019 Display Over 2.5um size particle
Particle 2.5um > pcs/L 1 0 999999 -
30020 (Big Endian)
30021 Display Over 5.0um size particle
Particle 5.0um > pcs/L 1 0 999999 -
30022 (Big Endian)
30023 Display Over 10.0um size particle
Particle 10.0um > pcs/L 1 0 999999 -
30024 (Big Endian)

40001 Reserved - - - - - -
40002 Reserved - - - - - -
40003 Reserved - - - - - -
40004 ID MODBUS ID - 1 1 247 1
0: 4800
1: 9600
Communication 2: 19200
40005 BPS 1 0 5 5
Speed 3: 38400
4: 57600
5: 115200
0: NONE
Communication
40006 1: EVEN - 1 0 2 0
Parity bit
2: ODD
Communication 0: 1Bit
40007 - Toggle 0 1 0
Stop bit 1: 2Bit
40008 PASSWORD Password for entering setup mode - 1 0 9999 0
0: OFF
40009 Buzzer - Toggle 0 1 1
1: ON

40010 Temp. Unit Temp. unit set( 1: ℉, 0: ℃ ) Toggle 0 1 0

40011 LCD LCD set( 1: ON, 0: OFF ) - Toggle 0 1 1

-7- R20190917
□ Parameter Table

No List Description Unit Step Min. Max. Default


0: None
1: Temp.
2: Humidity
3: 0.3um
Quadrant2 display 4: 0.5um
40012 - 1 0 7 3
information
5: 1.0um
6: 2.5um
7: 5.0um
8: 10.0um
0: None
1: Temp.
2: Humidity
3: 0.3um
Quadrant1 display
40013 4: 0.5um - 1 0 7 4
information
5: 1.0um
6: 2.5um
7: 5.0um
8: 10.0um
0: None
1: Temp.
2: Humidity
3: 0.3um
Quadrant3 display
40014 4: 0.5um - 1 0 7 2
information
5: 1.0um
6: 2.5um
7: 5.0um
8: 10.0um
0: None
1: Temp.
2: Humidity
3: 0.3um
Quadrant4 display
40015 4: 0.5um - 1 0 7 1
information
5: 1.0um
6: 2.5um
7: 5.0um
8: 10.0um
0: Auto
40016 Release Alarm - Toggle 0 1 0
1: Manual
40017 Delay Alarm time - Sec. 1 0 99 3
℃ -40.00 125.00 -20.00
40018 Lower temp. alarm limit Below the set value, alarm on 0.1
℉ -40.00 257.00 -4.00
℃ -40.00 125.00 50.00
40019 Higher temp. alarm limit Above the set value, alarm on 0.1
℉ -40.00 257.00 122.00
40020 Lower humidity alarm limit 설Below the set value, alarm on %R.H. 0.1 0 99.90 20.00
40021 Higher humidity alarm limit Above the set value, alarm on %R.H. 0.1 0 99.90 90.00
40022 Particle 0.3um Higher Above the set value, alarm on
pcs/L 1 0 999999 0
40023 alarm limit ( Big Endian )
40024 Particle 0.5um Higher Above the set value, alarm on
pcs/L 1 0 999999 0
40025 alarm limit ( Big Endian )
40026 Particle 1.0um Higher Above the set value, alarm on
pcs/L 1 0 999999 0
40027 alarm limit ( Big Endian )
40028 Particle 2.5um Higher Above the set value, alarm on
pcs/L 1 0 999999 0
40029 alarm limit ( Big Endian )
40030 Particle 5.0um Higher Above the set value, alarm on
pcs/L 1 0 999999 0
40031 alarm limit ( Big Endian )
40032 Particle 10.0um Higher Above the set value, alarm on
pcs/L 1 0 999999 0
40033 alarm limit ( Big Endian )
0: English
40039 Language - Toggle 0 1 1
1: Korea
0: OFF
40009 Button - Toggle 0 1 1
1: ON

-8- R20190917

You might also like