Scribd
Upload
83 views1 page

PRV Audio 18SW2200V2 Datasheet

This document provides specifications for the 18SW2200v2 professional low frequency driver from PRV Audio. It has a large 4-inch voice coil and can handle 1100 watts of continuous power with a sensitivity of 97 dB. The driver has a frequency response range of 45-2,500 Hz and features a die-cast aluminum frame. Key parameters including impedance, power handling, sensitivity, and frequency response range are provided.

Uploaded by

Chris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views1 page

PRV Audio 18SW2200V2 Datasheet

This document provides specifications for the 18SW2200v2 professional low frequency driver from PRV Audio. It has a large 4-inch voice coil and can handle 1100 watts of continuous power with a sensitivity of 97 dB. The driver has a frequency response range of 45-2,500 Hz and features a die-cast aluminum frame. Key parameters including impedance, power handling, sensitivity, and frequency response range are provided.

Uploaded by

Chris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

18SW2200v2

Professional Low Frequency Driver

KEY FEATURES

• Large 4” Voice coil


• 1,100 Watts continuous power handling
• 97 dB Sensitivity
• 45-2,500 Hz

Nominal Diameter 18” (457 mm)


Nominal impedance 8 ohms
Rated Power Handling 1100 Watts
GENERAL SPECIFICATIONS

Program Power 2200Watts


Sensitivity 2.83V at 1m 97 dB
Recommended Hi Pass Crossover* 50 Hz*
*For Full Power Handling *12db Per Octave Crossover

Frequency Response at -10dB 45 - 2,500 Hz


Voice Coil Diameter 4” (100 mm)
Voice Coil Wire Copper
Voice Coil Winding Depth 25.0 mm
Former Material Glass fiber
Magnetic Gap Depth 11.0 mm
Frame Material Die cast aluminum

Equivalent Volume Vas 157.1 l


18.11" (460mm)
Excursion (mathematical)*** Xmax 9.75 mm
THIELE-SMALL PARAMETERS

Free Air Resonance Fs 42.7 Hz


8.07" (205mm)

7.48" (190mm)
Mechanical Factor Qms 10.95
Electrical Factor Qes 0.45
Total Factor Qts 0.44
Cone Area Sd 1288 cm²
Mechanical Mass Mms 204.3 g 8.66" (220mm)

Bl Factor Bl 24.7 Tm 16.65" (423mm)


Dc Resistance Re 5.1 Ohms Frequency Response Measured at 2.83V/1m
110
Inductance Le 1.92 mH at 1 kHz
dBSPL
Mechanical Mass Without Air Mmd 178.16 g
100
Mechanical Compliance Cms 0.067 mm/N
90

Overal Diameter 18.11” (460 mm)


EXTRA INFO

80
Front Mount Baffle Cutout 16.65” (423 mm)
Mounting Depth 7.48” (190 mm)
70
Overall Depth 8.07” (205 mm)
Net Weight 32.8 Lbs (14.9 kg)
60
Shipping Weight 29.3 Lbs (13.3 kg) 20 50 100 200 500 1k 2k Hz 5k 10k 20k

Carton Dimensions W x L x H 20.27” x 19.68” x 10.23” PRV AUDIO USA (USA and Export) PRV AUDIO BRAZIL (Brazilian Sales Only)
FORT LAUDERDALE, FL SAO LEOPOLDO, RS
(515 x 500 x 260 mm) [email protected] [email protected]
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4 www.prvaudio.com www.pvaudio.com.br
PRV Audio strives to manufacture the best drivers in the Professional Loudspeaker industry. Specifications are subject to change due to continuous product improvement - Rev: 08/18

You might also like