Re17Lamw: Product Data Sheet
Re17Lamw: Product Data Sheet
Main
Range of product Zelio Time
Product or component Modular timing relay
type
Discrete output type Solid state
Width 17.5 mm
Component name RE17L
Time delay type A
Time delay range 1...10 s
10...100 h
6...60 s
0.1...1 s
1...10 min
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
6...60 min
1...10 h
Nominal output current 0.7 A
Complementary
Control type Selector switch front panel
[Us] rated supply voltage 24...240 V AC/DC 50/60 Hz
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Voltage range 0.85...1.1 Us
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Supply frequency 50...60 Hz +/- 5 %
Control signal pulse width 0.05 s typical
Insulation resistance 100 MOhm at 500 V DC conforming to IEC 60664-1
[Uimp] rated impulse withstand voltage 5 kV during 1.2/50 µs
Power on delay 100 ms
Connections - terminals Screw terminals, 1 x 0.5...1 x 3.3 mm² (AWG 20...AWG 12) solid without cable
end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable
end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 14) flexible with cable
end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
Tightening torque 0.6…1 N.m conforming to IEC 60947-1
Dielectric strength 2.5 kV 1 mA/1 minute 50 Hz conforming to IEC 61812-1
Housing material Self-extinguishing
Repeat accuracy +/- 0.5 % conforming to IEC 61812-1
Temperature drift +/- 0.05 %/°C
Voltage drift +/- 0.2 %/V
Setting accuracy of time delay +/- 10 % of full scale at 25 °C conforming to IEC 61812-1
Reset time 350 ms on de-energisation typical
On-load factor 100 %
Power consumption in VA 0…3 VA at 240 V AC
Maximum power consumption in W 1.5 W at 240 V DC
Breaking capacity 0.5 A AC/DC conforming to UL
0.7 A AC/DC at 20 °C
Operating frequency 10 Hz
Maximum output current 20 A <= 10 ms
Minimum switching current 10 mA
Maximum leakage current 5 mA
Maximum switching voltage 250 V AC/DC
Environment
Immunity to microbreaks 20 ms
Derating factor 5 mA/°C
Standards 2004/108/EC
EN 61000-6-1
2006/95/EC
EN 61000-6-3
EN 61000-6-2
IEC 61812-1
EN 61000-6-4
Product certifications GL
CSA
CULus
Ambient air temperature for storage -30…60 °C
Ambient air temperature for operation -20…60 °C
IP degree of protection IP20 (terminal block) conforming to IEC 60529
IP40 (housing) conforming to IEC 60529
IP50 (front panel) conforming to IEC 60529
Vibration resistance 20 m/s² (f= 10…150 Hz) conforming to IEC 60068-2-6
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity 93 % without condensation conforming to IEC 60068-2-30
Electromagnetic compatibility Electrostatic discharge immunity test: (in contact), level 3, 6 kV, conforming to
IEC 61000-4-2
Electrostatic discharge immunity test: (in air), level 3, 8 kV, conforming to IEC
61000-4-2
Susceptibility to electromagnetic fields: (80 MHz to 1 GHz), level 3, 10 V/m,
conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test: (capacitive connecting clip), level 3, 1
kV, conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test: (direct), level 3, 2 kV, conforming to
IEC 61000-4-4
1.2/50 µs shock waves immunity test: (differential mode), level 3, 1 kV,
conforming to IEC 61000-4-5
1.2/50 µs shock waves immunity test: (common mode), level 3, 2 kV, conforming
to IEC 61000-4-5
Conducted RF disturbances: (0.15...80 MHz), level 3, 10 V, conforming to IEC
61000-4-6
Voltage dips and interruptions immunity test: (1 cycle), 0 %, conforming to IEC
61000-4-11
Voltage dips and interruptions immunity test: (25/30 cycles), 70 %, conforming to
IEC 61000-4-11
Conducted and radiated emissions: , class B, conforming to EN 55022
Offer Sustainability
Sustainable offer status Green Premium product
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS
Declaration
Mercury free Yes
RoHS exemption information
Yes
China RoHS Regulation
China RoHS Declaration
2
Environmental Disclosure
Product Environmental Profile
Circularity Profile
End Of Life Information
3
Product data sheet RE17LAMW
Dimensions Drawings
Width 17.5 mm
4
Product data sheet RE17LAMW
Connections and Schema
Wiring Diagram
5
Product data sheet RE17LAMW
Technical Description
Description
The timing period T begins on energisation. After timing, the output(s) R close(s). The second output can be either timed or instantaneous.
Function: 1 Output
Function: 2 Outputs
2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.)
Legend
Relay de-energised
Relay energised
Output open
Output closed
C Control contact
G Gate
R Relay or solid state output
R1/ 2 timed outputs
R2
R2 The second output is instantaneous if the right position is selected
inst.
T Timing period
Ta Adjustable On-delay
-
Tr Adjustable Off-delay
-
U Supply