Nl Protection Relays A Protection Class of its Own Combined IDMTL Overcurrent & Earth Fault Relay . REA200nMH Protection Relays Represents a legacy of design and development, specializing in power management and power NA in solutions and its core expertise, electrical protection relays. The MH Protection Relays has its heritage dated since 1981 where, designed by Mun Hean and OEM by Kasuga of Japan, developed a range of electronic relays that dominated the market for decades. The range of relays were marketed under the brand name "Kasuga-MH" Today, with its own R&D wing, Mun Hean Technology Pte Ltd, MH continues this tradition. Anchored on the exclusive MTB fault indication system, we proudly bring to you this state-of-the-art protection relay series that is truly, A Protection Class of its Own. Features roprocessor-based with highest accuracy - Mechanical Trip Button (MTB) fault indication system - No requirement for auxiliary power supply for fault indication - Safeguard against automatic reset before fault rectification - Curve selection in accordance with ANSI, IAC, IEC, 1.3/10 ® Normally Inverse (NI) © Very Inverse (VI) © Extremely Inverse (El) © Short Time Inverse (STI) ‘* Moderate Inverse (MI) - Trip value recording (4-memory) - Date & time stamping for tripping - Integrated surge arrester against transient overvoltages - High set mode is incorporated for instantaneous protection - Tamper-proof design for settings protection - Serial interface RS485 for Modbus RTU communication (op' - Type tested* for EMC compliance in ace. with IEC 61000 - High immunity to electrical interference (tested to 2.5GHz) ~ Type tested in acc. with IEC 60255* * Type test report issued by independent testing laboratory is available upon request. Setting Display Instantaneous Indicator Mode 78 Fault Indication Latch Relay / sags Test Button (woos) paDex) ‘Menu Navigation KeysTechnical Data Characteristics Power supply AC / DC 85 - 265V (other voltages available on request) Operating frequency S0/60H2 Earth Fault setting 2.5056 (0.1% per step) Overcurrent setting 20 - 200% (3% per step) Time Multiplier Overcurrent / Earth Fault IOMTL 0.03 - 2.0 (IEC, 1.3), 0.3 - 20.0 (ANSI, 1AC) Time setting range (OTL) 0.03- 20sec Instantaneous Mode (High set) 2-10 * setting current Pick-up current. 100 - 115% of the setting current Reset current value 90% of the operating value Operating and storage temperature range (Operating -20°C to 55°C Storage and transit -20°C to 65°C Relative humidity (IEC 60068-2-30) 95% at 40°C Degree of protection (IEC 60529) 1P52, Voltage withstand (IEC 60255-5) 2kVrms for 1 min between all case terminals connected together and the case earth terminal 2kVrms for 1 min between independent circuit including contact circuits Overcurrent withstand 207 | rues for 3 sec (100A-0/C, 20A-E/F) Power Consumption ‘Approximately 2VA Operational life expectancy Electrical: > 1 x 10° operations Output contact Mechanical: > 5x 10* operations AC250V 5A Optional output contact 2 separate contacts - AC240V SA, DC24V SA - E/F & O/C indication Communication : 88485 LED status indication (Normal operation) (Fault current detected) Safety feature Mechanical Trip Button (MTB) Housing material ‘ABS resin complying with UL94VO Unit weight Approximately 600g ‘Compliance with standards IEC/EN 60755 General rules for residual-current protection devices TEC/EN 6100-42 _ | Electrostatic-discharge immunity test TEC/EN 61000-4-3 _[Radiated, radio-frequency, electromagnetic field immunity test (type tested to 2.5GHz) TEC/EN 61000-4-4 _ [Electrical fast transient/burst immunity test TEC/EN 6100-45 _ [Surge immunity test TEC/EN 6100-46 | Immunity to conducted disturbances, Induced by radio-frequency fields TEC/EN 60255-1 ‘Measuring relay and protection equipment TEC/EN 60255-5 Insulation coordination for measuring relays and protection equipment - Requirement and tests TEC/EN 6472-2 Dimensions 96 | 22 Low voltage switchgear and control gear, Part 2: Circuit breakers, Annex M and J s0505 M1...Characteristics Curve Time Current Character accordance with IEC 60255 PERATING TE (ee) ‘OPERATING TEs Connection Diagram MOBO MC About MTB Fault Indication System MTB, or Mechanical Trip Button is a fault indication system incorporated in advanced protection relaying for electrical power networks. The MTB does not require auxiliary supply to provide a fault indication. The MTB is designed to prevent power circuits from re-energising before AUX.POWER a fault is completely rectified. This is an essential AGIDC85~265V safety feature which protection relays using electrical latching mechanisms are not able to Authorized Dealer: