RTU540

Data Sheet 
Communication Unit 560CMD11

Communication Unit 560CMD11 The SLC works as master for the RTU560 serial
peripheral bus (I/O-Interface/‘Wired-OR-Bus’).
The MPU is responsible for the other tasks. The
MPU handles the absolute time and date for the
RTU. The time can be set and synchronized from
the central system via the serial lines or via the
Ethernet LAN interface (SNTP).

Application
The 560CMD11 is the Communication Unit (CMU)
of the DIN rail RTU540. The 560CMD11 consists
of a metal DIN rail Housing, which includes a CPU
and a Power Supply (PSU).
The essential tasks of the 560CMD11 are:
 Managing and controlling of the RTU211
I/O modules via the 10 pole Wired-OR-
Bus (WRB).
 Reading Process events from the input
boards.
 Writing commands to the output boards.
 Communicating with control systems and Figure 1: Function block diagram 560CMD11
local MMI systems via the 4 integrated se-
The control unit stores configuration files power
rial line interfaces and the 2 Ethernet
10/100 BaseT LAN interfaces. fail save in a removable Compact Flash memory
card. That allows the 560CMD11 to have valid
 Managing the time base for the RTU540
station and synchronizing the I/O mod- configuration data after power on and 560CMD11
ules. will be available again after a short initialization.
 Handling the dialogue between RTU540 The serial communication interfaces
and Web-Browser via the Ethernet inter-  Communication Port ‘CP1’
face.  Communication Port ‘CP2’
 Communication via integrated GPRS-  Communication Port ‘CPA’
Modem (only R0011)
 Communication Port ‘CPB’
are designed for RS232C and RS485 standard
Characteristics and can be parameterized by software.
The interfaces ‘E1’ and ‘E2’ are based for the
The two microprocessors are the essential hard-
Ethernet standard 10BaseT/100BaseT.
ware parts of the board, which share themselves
in the tasks: The connectors of the serial and Ethernet com-
munication interfaces are provided as RJ45 jacks
 MPU: 32 Bit Main Processing Unit
integrated in the board's front plate.
 SLC: 8 Bit Serial Line Controller

Doc.-No.: 1KGT 150 764 V007 1 1

RTU540
Data Sheet Communication Unit 560CMD11
The 560CMD11 serial peripheral bus (I/O- ERR (1x) red Error / Warning
Interface/‘Wired-OR-Bus’) is connected via 20- Tx (4x) green Transmit data,
pole pluggable connector. communication
The 560CMD11 R0011 provides a radio interface ports 1, 2, A, B
via an integrated Quad-Band GSM/GPRS mo- Rx (4x) green Receive data,
dem. For communication via the GSM/GPRS mo- communication
dem a pluggable SIM-Card is necessary. At the ports 1, 2, A, B
housing an antenna or antenna cable can be con-
Act (2x) green Ethernet activity
nected via connector RF (see Figure 2)
560CMD11 indicates operational and error states
Lnk (2x) yellow Ethernet link
by light emitting diodes on the front plate (see
Figure 3). The exact definition for the LED has to IO-Bus (1x) green Wired-OR-Bus
be taken from the functional description of the activity
RTU500 series releases. PF (1x) red One of the out-
put voltage is
fail
RUN (1x) green The CMU is
reachable via
Ethernet
RUN (1x) yellow Firmware is
running but not
reachable via
Ethernet
Def. IP (1x) red The default IP-
address is ac-
tive
GPRS (1x) green Communication
via GPRS mo-
dem

Table 1: Description LEDs

Due to different handling of the connection startup with different GPRS providers
we recommend a test installation before a rollout of 560MDD10/ 560CMD11 R0011
devices.

Doc.-No.: 1KGT 150 764 V007 1 2

RTU540
Data Sheet Communication Unit 560CMD11

Fig 2: Top side of 560CMD11 R0011 housing (with antenna connector RF)

Fig 3: Front side 560CMD11 R0011 housing

Fig 4: Bottom side of 560CMD11 R0011 housing

Doc.-No.: 1KGT 150 764 V007 1 3

 RTU540
Data Sheet Communication Unit 560CMD11

Technical Data
In addition to the RTU500 series general technical
GSM/GPRS modem (only R0011)
data, the following applies:
Frequency GSM 850MHz
max. 2Watt transmitting power
Main Processing Unit MPU
E-GSM 900MHz
Microprocessor ELAN520 @ 133 MHz max. 2Watt transmitting power
(incorporating an Intel
TM DCS 1800MHz
586 class 32 bit pro-
max. 1Watt transmitting power
cessor)
PCS 1900MHz
RAM 64 MByte max. 1Watt transmitting power
Flash Memory 128 MByte (Compact- GPRS Class 10
Flash)
SIM Card ID-000
Interface 50 SMA-RF connector
Serial Line Controller SLC
(female)
Controller Type 80C251
RAM 32 kByte
Power consumption of the 560CMD11
Dual Ported RAM 16 kByte
(without powered IO-bus interface)
Serial Interfaces ‘1’ and ‘2’ 24 V DC 300 mA (R0001)
380 mA (R0011
Physical Interface RS232C / RS485
selectable by software DC Input
Bit rate ≤ 38 400 bit/s Voltage: 24 V DC
Signal lines RS232C GND E2/102 Tolerance Range -15 ... +20 %
TxD D1/103 Max. Current 2.8 A @ 24 V DC
RyD D2/104
RTS S2/105 < 10 A, 1.5 m sec
CTS M2/106 Starting Current: (Class S1)
according IEC 60870-4
DTR S1.2/108
DCD M5/109 Efficiency: 88 % @ 24 V DC
Reverse voltage protection yes

Serial Interface ‘A’ and ‘B’

Physical Interface RS485 / RS232C se- Internal Output 1
lectable by software Voltage: 5.0 V DC
Bit rate ≤ 19 200 bit/s
Signal lines RS485 G Signal ground Tolerance: ±5%
A Receive/Transmit
B Receive/Transmit Current min.: 0A

Current max.: 1A
Ethernet LAN Interface ‘E1’ and ‘E2’
Physical Interface 10BaseT/100BaseT Residual Ripple  100 mVss

Bit rate 10/100 MBit/s

Doc.-No.: 1KGT 150 764 V007 1 4

RTU540
Data Sheet Communication Unit 560CMD11

Internal Output 2
Electromagnetic Compatibility
Voltage: ± 15 V DC
EN61000-4-2 8KV Air
Tolerance: ±5% Electrostatic Discharge 6KV direct
Immunity Performance criteria A
Current min.: 0A
EN61000-4-3 10V/m
Current max.: 0,5 A Radiated RF Field Performance criteria A
EN61000-4-4 2KV/4KV
Residual Ripple  200 mVss
Fast Transient Immunity Performance criteria A
(Burst)
Internal Output 3 EN61000-4-5 2KV/4KV
Voltage: 18 V DC Surge Immunity Performance criteria A
EN61000-4-6 10V
Tolerance: ±5% Conducted RF Field Performance criteria A

Current min.: 0A EN55011 30MHz up to 1GHz

RF emmisions air class A (Industry)
Current max.: 1A
EN55011 0,01 MHz up to 30 MHz
RF emmisions cable class A (Industry)
Residual Ripple  200 mVss

Environmental Compatibility
DC Output
(It is not allowed for the process supply) EN60068 -2 70°C 96h
Continuous Test fully active loaded
Voltage: 24 V DC
EN60068-2-1 -25°C 96h
Tolerance: -15 % … +20 % Continuous Test fully active loaded
EN60068-2- 1 -40°C
Current min.: 0A
Start up Test System starts on -40°C
Current max.: 500m A EN60068-2-14 0°C /70°C Temperature
Continuous Test cycles
Residual Ripple  200 mVss 48h , fully active loaded
EN60068-2-30 70°C/95% rel. Humidity
Continuous Test Storage, not activ
Mechanical Layout
IEC60255-21-3 Class 1
Metal Housing 204 x 105 mm
Height 55 mm Seismic Test
Weight Approx. 0.5 kg IEC60255-21-1 Class 1
Vibration Test
Connector Types
IEC60870-2-2 Class Bm
Power Supply 2 x 3 pole pluggable
screw terminals Vibration durance test
IO- Interface 1 x 20- pole IEC60255-21-2 15g, Class 1
Wirde- OR- Interface Pluggable connectors
Ethernet Interface E1 and RJ45 jack, 8 pole Schock Test
E2 IEC60870-2-1 25g, Class 1
Serial Interfaces 1, 2 and RJ45 jack, 8 pole
Schock Test
A, B
IEC60255-21-2 10g, Class 1
Bump Test

Doc.-No.: 1KGT 150 764 V007 1 5

RTU540
Data Sheet Communication Unit 560CMD11

Electrical Safety Ordering Information

EN60950- 1 Electrical Safety investi- 560CMD11 R0001 1KGT023400R0001
gation 560CMD11 R0011 1KGT023400R0011
Safety class 1 Bar (dipole) antenna 1KGT023600R0001
Flamability investigation
560ANA01
Wall-mount antenna 1KGT023700R0005
Environmental Conditions connected by a 5m
Temperatur -40 °C start up long coaxial cable
-25 °C … +70 °C operation 560ANA02
-40 °C … +85 °C storage Extension cable for 1KGT033800R0015
wall mounted GPRS
IP class IP 30 antenna 560ANA02
Relative humidity 5 … 95 % (non condensing) 560CAB02

Antenna Data
560ANA01 Bar antenna
Gain 2,2 dBi
Size 54mm x 6,7mm x 9,65mm
Connector SMA Male

560ANA02 (5m) Wall-Mount antenna with cable

Gain 2,2 dBi
Size Dimensions (H x L x B / W x
Ø)
370mm x 155mm x 36mm x
16mm
Cable type RG58
Cable length 4950 + 100mm
Protection IP66
Class
Weight 420g

560CAB02 extension cable for wall mounted

GPRS antenna
Cable type RG58
Cable length 15m

Doc.-No.: 1KGT 150 764 V007 1 6

RTU540
Data Sheet 
Communication Unit 560CMD11

Note:
We reserve the right to make technical changes or modify the contents
of this document without prior notice. With regard to purchase orders,
the agreed particulars shall prevail. ABB AG does not accept any
responsibility whatsoever for potential errors or possible lack of
information in this document.

We reserve all rights in this document and in the subject matter and
illustrations contained therein. Any reproduction, disclosure to third
parties or utilization of its contents - in whole or in parts –is forbidden
without prior written consent of ABB AG.

Copyright© 2013 ABB

All rights reserved

Doc.-No.: 1KGT 150 764 V007 1 7