Scribd
Upload
64 views9 pages

August Lockinstallation-Guide-Asl-Pro

Uploaded by

Amit Kidecha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views9 pages

August Lockinstallation-Guide-Asl-Pro

Uploaded by

Amit Kidecha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

August Smart Lock Pro

Installation Guide
Inside the Box

August Smart Lock Pro Mounting Plate

3 Adapters Adhesive Strip

What you need

Phillips Screwdriver

! Before starting, we recommend confirming your deadbolt at august.com/compatibility

1
1. Prepare your existing deadbolt
Use the supplied adhesive strip to hold the keyed side of the lock in place.

2. Remove your existing thumbturn


Unscrew and remove the screws from your existing deadbolt thumbturn. If there is
an additional back plate, remove that as well. Be sure to unlock your deadbolt
before removing the thumbturn entirely.

2
3. Prepare the mounting plate
The included mounting plate has two adjustable screw-holes that can be
repositioned as needed. Remove the screws from the thumbturn and insert them
into the front of the mounting plate.

4. Attach the mounting plate


Tighten the screws by hand until the mounting plate is secured against the door.

3
5. Choose your adapter

Select your adapter from the Compatibility Chart above.

If your lock brand is not in the chart, slide each adapter onto the tailpiece to find the
right one. The correct adapter will have the small nub pointing up.

NOTE: The adapters can be placed in the mounting plate backwards. So if the shape
is correct, but it seems backwards, try flipping the adapter around.

6. Attach the correct adapter


Place the correct adapter onto the tail piece with the small nub pointing up.

4
7. Open the wing latches
Pull out both side wing latches to prepare for mounting.

8. Attach the August Smart Lock Pro


Slide the August Smart Lock Pro over the tailpiece and attach it to the mounting
plate. Make sure the back of the lock is flush with the door. To secure the August
Smart Lock Pro, clamp down both side wing latches to the mounting plate
completely.

5
9. Remove the faceplate
Press down on the August logo located at the bottom of the face plate. Grab the
top of the faceplate and remove it.

10. Remove the battery tab


While holding the batteries in place, remove the plastic battery isolation tab. Make
sure that the battery is properly seated in its compartment.

6
11. Replace the faceplate
Place the faceplate back onto the August Smart Lock Pro, with the August logo at
the bottom.

12. Install DoorSense™


DoorSense™ enables your lock to know when the door is open and closed. For
instructions on installing DoorSense™, please visit the link below:

http://support.august.com/customer/portal/articles/2875699

7
13. Use the August Home app to complete setup
Download and install the August Home app. Select "Get Started" from the home
screen, or, if already logged in to the app, select "Set Up a Lock" from the main menu.

http://august.com/app

Help
Call 844-AUGUST1 (284-8781)
or visit: august.com/support for answers.

12.17-R1 8

You might also like