SANITARY SELF-PRIMING PUMPS

CLOSED COUPLED WITH STANDARD MOTOR

SERIES
A - AS

SELF-PRIMING

Series A-AS
PUMPS
 C.S.F. INOX SPA

PREFACE AND WARNING

This publication does not constitute a contract proposal or an offer to the public or product adverti-
sement.
This publication is reserved to the internal operators of C.S.F. INOX.
Any kind of product sale and marketing can occur only according to the general terms of contract and
special conditions listed by C.S.F. INOX as per contract forms.
All the instructions, data and representations (in whatever way executed) listed in this publication are
indicative and do not binding.
C.S.F. does not stand surety or undertake any obligation for the utilisation of this document and for
the information contained. In particular, it does not guarantee against omissions or errors of the data
and drawings here indicated.
Notice that the technical specifications, information and representations in this document are merely
indicative and approximate.
C.S.F. INOX reserves the right at any moment and without notice to modify the data, drawings and
information indicated in this document.
C.S.F. INOX recommends anyone to verify with the C.S.F. INOX operators contractual conditions
and the product characteristics as per the official documents attached to all products in the C.S.F.
INOX range.
All the general and non-binding technical specifications and representations may not correspond to
the real conditions of the products and to their operating modes for each different application.
C.S.F. INOX guarantees its own products according to the general guarantee conditions in com-
pliance with the required modes of utilisations as per separate documents, regardless of what is
indicated in this document, if the assembly and operating methods of the products are observed.
Only the instructions indicated in the contract documents, if duly undersigned by authorised C.S.F.
INOX personnel, are binding for C.S.F. INOX.
We remind our technical and business collaborators to show the customer our range of products
indicating the technical specifications of each type, with the conditions of utilisation and the actual
utilisation methods.
Please consider this warning carefully because C.S.F. INOX shall not be liable for any utilisation of
this document, of the data and representations here indicated.
 Self-Priming Sanitary Pumps
AS SERIES
Standard design
AS series sanitary self-priming pumps..
A close coupled design with independent shaft support and standard IEC
motors. The ability of these pump to maintain a vacuum under varying suction
conditions, makes them ideal for applications where the incoming liquid
contains gas or air, such as vessel scavenging, the handling of foaming liquids
or where the suction pipe is only partially flooded.
Prior to the first start-up, they must be initially filled with liquid; subsequently,
liquid remains in the pump, allowing rapid self-priming to occur, even if
the suction pipe is emptied. The construction materials and the quick
disassembly design make the AS series particularly suitable for a wide range
of applications.
The pumps are designed to a modular concept.

Wetted parts in CF-3M 1.4404 / AISI 316L stainless steel, investment cast
and electro-chemically polished. Special internal finishes to 0,5 micron Ra
are available on request.

The clamp casing and seal design allows quick disassembly for inspection,
cleaning and maintenance.

Stainless steel adjustable feet.

Seals:

Mechanical seals with seats to EN 12756,

ISO 3069 standards.
Single internal mechanical seal
Flushed mechanical seal
Double flushed mechanical seal

Elastomers (certified to FDA):

EPDM
Fluorocarbon
Silicone
P.T.F.E. (FEP)

Connections:
Rev. 00

DIN - SMS - IDF - BS / RJT - DS - CLAMP and EN 1092-1 PN16 flanges

1 to suit most international standards.
INDEPENDENT SUPPORT
Sturdy and modular support
to be integrated in the various
solutions.

SEPARATE MOTOR
For a self-sufficient choice in compliance with the following
standards:
- IEC 34 - 1
- VDE 0530T1
- NF C51 - 111
- BS 5000 PART. 99
- NEMA MG1 PART. 1

Casing
Casing with side duct, 6 mm thick, with perfect development
of the shape, enhanced by investment casting.

IMPELLER
Each pump model has its own impeller that is manufactured
with perfect shapes, thickness and materials and balanced
thanks to the investment casting procedure. This means
that they are perfectly efficient and reliable.

Front casing cover

Front casing cover with side duct obtained by investment
casting plus holding chamber.
Rev. 00

2
 APPLICATIONS

AS series pumps incorporate design features and material technologies that enable them to fulfil a wide range of
operational requirements within the food, beverage, dairy, pharmaceutical and chemical industries. They are especially
suited for clear low viscosity fluids: CIP solutions, water, juices, wine, spirits, chemicals and pharmaceutical media, in
CIP scavenge/return and tank emptying duties.

Self - priming, sanitary, easy - opening, side channel pump.

Star-shaped impellers in CF-3M 1.4404

/ AISI 316L stainless steel achieved
with micro-casting procedure.
Rev. 00

3
 PUMP TYPE

AS 52

AS 80
AS 65
AS 60
AS 50
AS 42
AS 40
COVER

IMPELLER
2nd STAGE

INTER CASING

IMPELLER
1st STAGE

A range of 4 single-stage and 2 two-stage versions.

CLAMP
or
RAG BOLT
AS SERIES

CASING

MECHANICAL SEAL

SHAFT

BEARING FRAME

Rev. 00

4
 GENERAL DIAGRAM

Q [l / min]

H H
[m] [ft]

1450
rpm

Q [m3 / h]
Performance applies to H2O at 20 °C, 1013 millibar Data not binding

GENERAL DIAGRAM

Q [l / min]

H H
[m] [ft]

1750
rpm

Q [m3 / h]
Rev. 00

Performance applies to H2O at 20 °C, 1013 millibar Data not binding

5
 PUMP CODES GUIDE as

A S .
40
42
50
52 PUMP SIZE
60
65
80

4 (1450/1750 [rpm]) No. of poles

HP BRAKE HORSEPOWER

B : Stainless Steel
PUMP material
UNI EN 10283 - 1.4409 (Product wetted steel
ACI-ASTM 743-98 - CF3M parts)
UNI EN 10088 - 1.4404
AISI - 316L

D - Fluorocarbon (FPM)
M - EPDM PUMP SEALS
S - Silicon (Product wetted seals)
T - P.T.F.E. (Fep)

C- Drainage
D- “DS” connections
G- “Gas” connections
J - "RJT" connections
K- Heated casing cover
L - Flanged connections SPECIAL EXECUTIONS
M- “SMS” connections
N- "Clamp" connections
O- "IDF" connections
P - Motor shroud
Z - Ex-Proof motor

Q - Double flushed mechanical seal

T - Internal mechanical seal
V - Internal mechanical seal + TMR
MECHANICAL SEALS

Material code (ref. tab. CD004)

Rev. 02

Example: AS 50-4-3/BM.PT31 6
 mechanical sealS

AS pumps are fitted with standard seal seats according to: EN 12756, ISO 3069 standards .
The seal components are available in a wide range of materials, to be selected according to handled product features
and the operating conditions.

execution T
standard mechanical seal assembly “t”
Internal assembly seal, running into the handled product
and placed immediately behind the impeller in a special
seal chamber to ensure the correct re-circulation around
the seal faces.

execution v
internal mechanical seal assembly “V”
The external liquid circulation chamber prevents any
damages to the electric motor and contamination of the
environment, due to the possible leakage of the internal
mechanical seal.
Rev. 00

7
 mechanical sealS
MATERIAL CODES

METALS RESINS METAL CARBONS ELASTOMERS

X - Stainless steel 5 - Normal PTFE 3 - Hard metal welded on 6 - Nitrile (NBR)
AISI 316L 4 - Loaded PTFE stainless steel (TUC) 7 - Ethylene propylene (EPDM)
L - Hastelloy (Ni alloy) F - O-Ring FEP R - Integral anti-corrosion W - FPM for high T
hard metal (TUC) Y - Fluorocarbon (FPM)
CARBONS METAL OXIDES K - Integral silicate carbon B - Silicone
V - Normal carbon 2 - Alumina ceramic (SIC) Q - Chemraz
Z - Special carbon U - Kalrez

execution q
compact double mechanical seal
assembly “Q”
Double back-to-back assembly seal, suitable for abrasive,
dirty, crystallizing or high-temperature liquids.
The seal assembly is completely housed and the latter is
provided with inlet/outlet flushing media that lubricates and
cools the seal faces preventing also crystal formation. In
case of product-side seal leakage, traces of the handled
product can be noted into the flushing media.

AS 50 - AS 65 single-stage pumps

AS 42 2-stage pump
Rev. 01

8
 SERIEs As 40-50-60-65-80 with shroud 1450 rpm overall dimensions

Dimensions not binding - DN = DIN 11851 male threaded connections with standard IEC/EN motors

Pumps Weight
kW DN A B C C1 E E1 F G K H J I I1 Y L L1 kg
1,1 40 302 176 - 190 - 224 150 440 590 162 110 307 346 197 178 - 29
AS 40 1,5 40 302 176 - 190 - 224 150 440 590 162 110 307 346 197 178 - 31
2,2 40 330 176 - 301 - 183 150 520 670 190 110 335 395 225 225 - 45
2,2 50 330 196 - 301 - 202 175 523 697 228 114 378 433 264 225 - 50
AS 50 4 50 330 196 - 301 - 202 175 523 697 228 114 378 433 264 225 - 59
1450 rpm

5,5 50 370 196 333 - 268 - 175 622 797 228 114 378 450 264 225 198 70
4 65 330 215 - 301 - 202 204 514 718 228 135 408 433 273 225 - 62,5
AS 60 5,5 65 370 215 334 - 267 - 204 612 816 228 135 408 450 273 225 198 75
5,5 65 370 215 334 - 267 - 204 612 816 228 135 408 450 273 225 198 76,5
AS 65 7,5 65 370 215 334 - 267 - 204 612 816 228 135 408 450 273 225 198 82,5
11 65 480 215 470 - 337 - 204 818 1022 228 135 480 523 273 225 254 109
11 80 480 267 498 - 337 - 245 854 1099 228 160 446 523 286 225 254 129
AS 80 15 80 480 267 542 - 337 - 245 854 1099 228 160 446 523 286 225 254 140
18,5 80 400 267 570 - 254 - 245 852 1097 230 160 448 575 288 225 279 168

SERIEs as 40-50-60-65-80 without shroud 1450 rpm overall dimensions

*Motor thicknesses upon request

Dimensions not binding - DN = DIN 11851 male threaded connections with standard IEC/EN motors

Weight
Pumps kW DN A B C ØD E F G K H J I Y L M N O kg
1,1 40 200 296 100 10 34 150 377 527 90 110 235 125 140 - - - 26
AS 40 1,5 40 200 296 125 10 9 150 377 527 90 110 235 125 140 - - - 28
2,2 40 250 313 140 12 18 150 463 613 100 110 245 135 160 - - - 41
2,2 50 250 344 140 12 18 175 467 642 100 114 250 136 160 - - - 45
AS 50 4 50 250 351 140 12 18 175 431 606 112 114 262 148 190 - - - 54
1450 rpm

5,5 50 300 392 140 12 15 175 538 713 132 114 282 168 216 - - - 65
4 65 250 371 140 12 18 204 430 634 112 135 292 157 190 - - - 57
AS 60 5,5 65 300 412 140 12 20 204 529 733 132 135 312 177 216 - - - 68
5,5 65 300 412 140 12 20 204 529 733 132 135 312 177 216 - - - 69,5
AS 65 7,5 65 300 412 178 12 20 204 529 733 132 135 312 177 216 - - - 76
11 65 350 475 210 15 21 204 687 891 160 135 340 205 254 - - - 104
11 80 350 552 210 15 23 245 722 967 160 160 378 218 254 - - - 118
Rev. 04

AS 80 15 80 350 552 254 15 23 245 722 967 160 160 378 218 254 - - - 129
9 18,5 80 350 561 279 15 23 245 767 1012 180 160 398 238 279 - - - 157
 SERIEs as 42-52 with shroud 1450 rpm overall dimensions

Dimensions not binding - DN = DIN 11851 male threaded connections with standard IEC/EN motors

Weight
Pumps kW DN A B C C1 E E1 F G K H J I I1 Y L L1
1450 rpm

kg
2,2 40 300 234 - 301 - 183 208 520 728 190 110 335 395 225 225 - 56
AS 42 3 40 300 234 - 301 - 183 208 520 728 190 110 335 395 225 225 - 60
AS 52 5,5 50 430 258 266 - 280 - 237 567 804 228 113 378 450 264 225 180 85

SERIEs as 42-52 without shroud 1450 rpm overall dimensions

*Motor thicknesses upon request

Dimensions not binding - DN = DIN 11851 male threaded connections with standard IEC/EN motors

Weight
Pumps kW DN A B C ØD E F G K H J I Y L M N O
1450 rpm

kg
Rev. 03

2,2 40 250 382 140 12 18 208 426 634 100 110 245 135 160 - - - 51
AS 42 3 40 250 382 140 12 18 208 426 634 100 110 245 135 160 - - - 55
AS 52 5,5 50 300 454 140 12 20 237 505 742 132 113 282 168 216 - - - 77 10
 CURVE CARATTERISTICHE Serie AS
PERFORMANCE CURVES AS Series
1450 giri/min - 1450 rpm
Rev. 01

11
 CURVE CARATTERISTICHE Serie AS
PERFORMANCE CURVES AS Series
1450 giri/min - 1450 rpm

Rev. 01

12
 CURVE CARATTERISTICHE Serie AS
PERFORMANCE CURVES AS Series
1750 giri/min - 1750 rpm
Rev. 02

13
 CURVE CARATTERISTICHE Serie AS
PERFORMANCE CURVES AS Series
1750 giri/min - 1750 rpm

Rev. 01

14
 SELF-PRIMING PUMPS
A SERIES

Standard design
A Series pumps ideally suited for scavenge duties and applications where the inlet pipework is only partially filled,
or where the incoming liquid includes entrained air or gas. The construction materials and quick disassembly design
make them particularly suitable for a wide variety of applications.

They must be initially filled with liquid for the first start-up; afterwards, a small liquid reservoir remains to enable rapid
self-priming to occur even if the suction pipe is emptied.

All CF-8M 1.4408 / AISI 316 Stainless steel parts.

Investment cast, with electro-chemical polishing.
Flow rates up to 50 m3 /h, heads up to max.
35 m (3,5 bar) (50 Hz).

Seals: (Suitability for food contact on demand)

Mechanical seals with seats to EN 12756.
ISO 3069 standards.
Single internal mechanical seal
Tenuta singola esterna

Elastomers
EPDM
Fluorocarbon
Silicone A 21- A31 : Close-coupled pumps with the impeller directly
P.T.F.E. (Fep) supported by the electric motor shaft. Easy-opening front
cover, by unscrewing three hand-nuts, allows quick inspection
Connections: without disconnecting the inlet and outlet pipes
DIN - SMS - IDF - BS / RJT - DS - CLAMP
and EN 1092-1 PN16 flanges to suit most
international standards.

A 41 - A 51 - A 66 - A 81: Close-coupled design with

separate IEC motor and flexible coupling. Easy-
opening front cover, for quick inspection without
disturbing the inlet and outlet pipes.
Rev. 01

15
 DIFFERENT EXECUTIONS

Closed coupled pump mod. A 31 with external mechanical

seal and overhang impeller on extended motor shaft.

Closed coupled pump mod. A 41 - 51 - 66 - 81, with

shroud and internal mechanical seal, coupled with
motor through flexible coupling.

APPLICATIONS
Pump suitable to handle clear fluids, chemical products, solvents, CIP solutions, raw alimentary products, oil, wine,
liqueurs.

Execution with hydraulic motor.

Installation on tanker.
Rev. 01

16
 GENERAL DIAGRAM
Q [l / min]

A 81

A 66
A 51

H A 41 H
[m] [ft]
A 31
A 21

1450
rpm

Q [m3 / h]
Performance applies to H2O at 20 °C, 1013 millibar Data not binding

GENERAL DIAGRAM
Q [l / min]

A 81

A 66
A 51

A 41
H
[m] A 31 H
A 21
[ft]

1750
rpm

Q [m3 / h]
Performance applies to H2O at 20 °C, 1013 millibar Data not binding
Rev. 00

17
 pump CODES GUIDE a

A .

21
31
41
PUMP SIZE
51
66
81

4 (1450/1750 [rpm]) NO. of poles

HP BRAKE HORSEPOWER

B : Stainless Steel
PUMP MATERIAL
UNI EN 10283 - 1.4408 (Product wetted steel parts)
ACI-ASTM 743-98 - CF8M
UNI EN 10088 - 1.4401
AISI - 316

D - Fluorocarbon (FPM)
M - EPDM PUMP SEALS
(Product wetted seals)
S - Silicon
T - P.T.F.E. (Fep)

B- By-Pass
C- Drainage
J - "RJT" connections
K- Heated casing cover
L - Flanged connections
SPECIAL EXECUTIONS
M- "SMS" connections
N- "Clamp" connections
O- "IDF" connections
P - B5 motor with shroud
Z - Ex-Proof motor

Y - External mechanical seal

(One direction or reversible)
T - Internal mechanical seal
(Reversible) MECHANICAL SEALS

Material code (ref. tab. CD004)

Rev. 02

Example: A 51-4-3/BM.NT31 18
 MECHANICAL SEALS

A pumps are fitted with standard seal seats according to: EN 12756, ISO 3069 standards.
The seal components are available in a wide range of materials, to be selected according to handled product features
and the operating conditions.

MATERIAL CODES

FOR A 21 - A 31 PUMPS
Metals Carbons Metal carbons Elastomers
X - Molybdenum nickel-plated V - Normal carbon 3 - Hard metal welded on 6 - Nitrile
stainless steel AISI 316 Z - Special carbon stainless steel (TUC) 7 - Ethylene propylene
R - Integral anti-corrosion Y - Fluorocarbon
Metal oxides Resins hard metal (TUC) B - Silicone
2 - Alumina ceramic 4 - Normal PTFE K - Integral silicate carbon U - Kalrez
5 - Loaded PTFE SIC
F - O-ring FEP

FOR A 41 - A 51 - A 66 - A 81 PUMPS
Carbons Resins Metal carbons Elastomers
Z - Special carbon 5 - Loaded PTFE K - Integrate silicate 7 - Ethylene propylene
F - O-ring FEP carbon SIC Y - Fluorocarbon

EXECUTION y
Mechanical seal assembly “Y”
External assembly seal, standard version on A 21-31
pump sizes. Suitable for these low-pressure sizes, the
seal components are not directly touched by the handled
product, avoiding corrosion problems and seal-working
conditioning.

ONE DIRECTION REVERSIBLE

EXECUTION TREVERSIBLE
mechanical seal assembly “T” REVERSIBLE
Internal assembly seal, standard version on A 41 - A 51 -
A 66 - A 81 pump sizes, placed in a suitable seal chamber
to ensure the correct re-circulation. It can operates in both
directions.
Rev. 02

19
 SERIES a 21-31 WITHOUT SHROUD 1450 rpm OVERALL DIMENSIONS

A 21 A 31

GAS (BSP female) connection on A21

Dimensions not binding - DN = DN = DIN 11851 male threaded connection for A31

Weight
Pumps kW DN A B C D E F G K H J I Y L M O P Q W
1450 r.p.m.

kg
0,37 3/4”G 170 149 106 90 8 62 268 330 71 84 155 80 112 132 7 - - 192 11
A 21
0,55 3/4”G 170 152 118 100 9 62 286,5 348,5 80 84 164 80 125 150 9 - - 210 13,5
0,55 32 203 175 118 100 9 75 295,5 370,5 80 117 197 110 125 150 9 - - 210 16
A 31
0,75 32 203 175 118 100 9 75 295,5 370,5 80 117 197 110 125 150 9 - - 210 17

SERIES a 41-51-66 WITHOUT SHROUD 1450 rpm OVERALL DIMENSIONS

exec. A 66
(MOTORS SIZE IEC 132)

Dimensions not binding - DN = DIN 11851 male threaded connections with standard IEC/EN motors
(*) Bearing frame designed for direct coupling with motor frame ...
Weight
Pumps kW DN A B C D E F G K H h J I Y L M O P Q R S T U V W Z PAM
(*) kg
1450 r.p.m.

1,1 40 250 116 132 89 53,5 79 452 531 122 - 120 242 120 135 175 12 117 54 - - - 20 22,5 272 6 90 39
A 41
1,5 40 250 116 132 89 53,5 79 452 531 122 - 120 242 120 135 175 12 117 54 - - - 20 22,5 272 6 90 42
2,2 50 273 127 138 95 59,5 88 499 587 130 - 140 270 140 175 215 12 119 64 - - - 20 22,5 290 6 100 60
A 51
4 50 273 127 138 95 59,5 88 521 609 130 - 140 270 140 175 215 12 119 64 - - - 20 22,5 284 6 112 73
Rev. 01

4 65 307 182 150 95 74 133 540 673 145 - 185 330 180 190 230 12 137 65 - - - 25 28 299 8 112 87
A 66
5,5 65 307 182 150 95 74 133 600 732 145 15 185 330 180 190 230 12 137 65 300 5 393 25 28 299 8 132 104 20
 SERIES a 81 WITHOUT SHROUD 1450 rpm OVERALL DIMENSIONS

Dimensions not binding - DN = DIN 11851 male threaded connections with standard IEC/EN motors
(*) Bearing frame designed for direct coupling with motor frame ...
Weight
Pumps kW DN A B C D E F G K H J I Y L M O P Q U V W Z PAM
1450 r.p.m.

(*) kg
9,2 80 326 247 292 214 233 55 833 888 200 220 420 190 230 260 14 339 83 32 35 406,5 10 132 101
A 81 11 80 350 247 292 214 233 55 994 1049 200 220 420 190 230 260 14 339 123 32 35 464 10 160 120
15 80 350 247 292 214 233 55 994 1049 200 220 420 190 230 260 14 339 123 32 35 464 10 160 129

SERIES a 21-31 WITH SHROUD 1450 rpm OVERALL DIMENSIONS

A 21 A 31

GAS (BSP female) connection on A21

Dimensions not binding - DN = DN = DIN 11851 male threaded connection for A31

Weight
Pumps kW DN A B C D E F G K H J I Y L M O P Q W
1450 r.p.m.

kg
A 21 0,55 3/4”G 238 88 - 173 - 62 336 398 153 85 238 80 125 150 - - - 301 16,5
Rev. 01

0,55 32 238 111 - 173 - 75 334 409 153 117 270 110 125 150 - - - 301 19
A 31
21 0,75 32 238 111 - 173 - 75 334 409 153 117 270 110 125 150 - - - 301 20
SERIES A 41-51-66 WITH SHROUD 1450 rpm OVERALL DIMENSIONS

exec. A 66
(MOTORS SIZE IEC 132)

Dimensions not binding - DN = DIN 11851 male threaded connections with standard IEC/EN motors
(*) Bearing frame designed for direct coupling with motor frame ...
Weight
Pumps kW DN A B C D E F G K H h J I Y L M O P Q R S U V W Z PAM
(*) kg
1,1 40 297 116 132 89 53,5 79 549 631 122 - 120 242 120 135 175 12 117 51 - - 20 22,5 313 6 90 42
1450 r.p.m.

A 41
1,5 40 297 116 132 89 53,5 79 549 631 122 - 120 242 120 135 175 12 117 51 - - 20 22,5 313 6 90 45
2,2 50 333 127 138 95 59,5 88 607 704 130 - 140 270 140 175 215 12 119 61 - - 20 22,5 337 6 100 63
A 51
4 50 333 127 138 95 59,5 88 607 704 130 - 140 270 140 175 215 12 119 61 - - 20 22,5 337 6 112 76
4 65 369 182 150 95 74 133 667 800 145 - 185 330 180 190 230 12 137 62 - - 25 28 360 8 112 91
A 66
5,5 65 369 182 150 95 74 133 667 800 145 15 185 330 180 190 230 12 137 62 300 5 25 28 360 8 132 108

SERIES
A 81 WITH SHROUD 1450 rpm OVERALL DIMENSIONS

Dimensions not binding - DN = DIN 11851 male threaded connections with standard IEC/EN motors
(*) Bearing frame designed for direct coupling with motor frame ...
Weight
Pumps kW DN A B C D E F G K H J I Y L M O P Q U V W Z PAM
(*) kg
1450 r.p.m.

9,2 80 432 247 292 214 233 55 1036 1090 200 220 420 190 230 260 14 339 83 32 35 434 10 132 109
A 81 11 80 432 247 292 214 233 55 1036 1090 200 220 420 190 230 260 14 339 123 32 35 475 10 160 134
Rev. 03

15 80 432 247 292 214 233 55 1036 1090 200 220 420 190 230 260 14 339 123 32 35 475 10 160 143
22
 CURVE CARATTERISTICHE Serie A
PERFORMANCE CURVES A Series
1450 giri/min - 1450 rpm
Rev. 00

23
CURVE CARATTERISTICHE Serie A
PERFORMANCE CURVES A Series
1450 giri/min - 1450 rpm

Rev. 00

24
 CURVE CARATTERISTICHE Serie A
PERFORMANCE CURVES A Series
1750 giri/min - 1750 rpm
Rev. 00

25
CURVE CARATTERISTICHE Serie A
PERFORMANCE CURVES A Series
1750 giri/min - 1750 rpm

Rev. 00

26