Scribd
Upload
24 views

Codea Them

The document defines constants and configures ports for a PIC microcontroller. It initializes a timer to toggle an LED every second and displays a number on 7-segment displays by pressing buttons to increment or decrement the value.

Uploaded by

Duy Vũ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
24 views

Codea Them

The document defines constants and configures ports for a PIC microcontroller. It initializes a timer to toggle an LED every second and displays a number on 7-segment displays by pressing buttons to increment or decrement the value.

Uploaded by

Duy Vũ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

#include <xc.

h>

#define _XTAL_FREQ 20000000

__CONFIG( FOSC_HS & WDTE_OFF & PWRTE_OFF & CP_OFF & BOREN_ON & LVP_OFF & CPD_OFF &
WRT_OFF & DEBUG_OFF);

#define SBIT_T2CKPS1 1

#define sw1 RC0

#define sw2 RC2

#define LED RC1


unsigned int count = 0, dem = 1;

unsigned int a,b;

const unsigned char MALED[] = {0xC0, 0xF9, 0xA4, 0xB0, 0x99,0x92, 0x82,0xF8, 0x80, 0x90};

void timer2_init(){

T2CON = (1<<SBIT_T2CKPS1);

TMR2=100; //Khoi tao gia tri bat dau de tao tre 500us

TMR2IE=1;

GIE=1;

PEIE=1;

TMR2ON = 1;

//tao ham ngat timer2 500us

void __interrupt() timer2(){

if(TMR2IF == 1){

TMR2 = 101;

TMR2IF = 0;

if(count>=2000) //500us * 2000=1000000us=1sec

count=0;

LED=~LED; //dao trang thai led

else

count++;
}

void main(void) {

TRISB = 0x00;

TRISD = 0x00;

TRISCbits.TRISC0 = 1;

TRISCbits.TRISC2 = 1;

TRISCbits.TRISC1 = 0;

LED = 0;

PORTD = 0x00;

PORTB = 0x00;

timer2_init();

while(1)

a=dem/10;

b=dem%10;

PORTDbits.RD0=0; PORTB = MALED[a];

__delay_ms(5); PORTDbits.RD0=1;

PORTDbits.RD1=0; PORTB = MALED[b];

__delay_ms(5); PORTDbits.RD1=1;

if(sw1 == 0 && dem < 99){

__delay_ms(50);

if(sw1 == 1){
dem++;

if(sw2 == 0 && dem > 0){

__delay_ms(50);

if(sw2 == 1){

dem--;

You might also like