Scribd
Upload
254 views

TRSV Lock Out Tool Data Sheet

Uploaded by

Rizky Wahyu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
254 views

TRSV Lock Out Tool Data Sheet

Uploaded by

Rizky Wahyu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TRSV Lock-Out Tool (LOT)

The NOV TRSV Lock-Out Tool (LOT) is wireline deployed accessory tool designed to permanently lock-open
tubing retrievable downhole safety valves that are no longer fully functional. Once the safety valve is locked
open, a separate Communication Tool can be used to establish hydraulic communication and facilitate the
insertion of a wireline deployed, hydraulically controlled, secondary safety valve.

The LOT is deployed with standard wireline equipment (spang jar and weight bars) until it lands on the “no-go”
shoulder within the safety valve. Mechanical jarring locates dogs within the safety valve internal lock profile and
expands another set of dogs above the flow tube. Continued jarring compresses the power spring and drives
the flow tube and flapper into the fully opened position. All power spring compression and flow tube movement
is captured with internal ratchets during the operation. Once the safety valve is fully open, continued jarring
permanently deforms the flow tube below the square face of the hydraulic chamber housing preventing the flow
tube from moving back into the closed position. Additional jarring collapses the tool for recovery.

The LOT is a simple, proven, and robust accessory tool for permanent safety valve lock-open operations. It does
not require fluid within the well or additional wellbore hydraulic pressure to successfully function. The tool design
removes all lock-open specific features within the safety valve, ultimately increasing the long-term reliability by

Contact NOV for specific tool application information. Contact your local NOV representative, or reference the
appropriate safety valve technical operating manual for more information.

Features
• Simple, robust design
• Straightforward operation
• Minimal components
• Easily field redressed
• Built-in visual tattle-tale verification of proper lock-open set
• Contingency shear-release feature

Benefits
• Standard wireline operations
• Lock-opens are achieved with minimal wireline manipulation
• All tool components collapse within the outside diameter once locked-open
•
tubing operations

Applications
• Tubing deployed safety valve lock-open operation

Lock-Out Tool Engineering Data†

Tubing Size Max OD Polished Bore Diameter Overall Length Weight


in (mm) in (mm) in (mm) in (cm) lbs (kg)

2.298 (58.37) 2.250 (57.15)


2.875 (73.03) 76.59 (194.54) 47.58 (21.58)
2.395 (59.92) 2.313 (58.75)
2.796 (71.02) 2.750 (69.85)
3.500 (88.90) 77.59 (197.08) 87.23 (39.57)
2.859 (72.62) 2.813 (71.45)

* Note - “CF” Denotes Curved Flapper


†

Additional sizes and functionallity is available upon request.

[email protected] nov.com/completiontools
©National Oilwell Varco - All rights reserved - 12567_ ENG_V02

You might also like