ROLLER CHAINS

SOLID BUSHINGS & ROLLERS

 Caution
We take great care in manufacturing chains, sprockets and other
products shown here.
Nevertheless, errors and shortcomings in the selection, handling and
maintenance of these products can cause chains to break or be
damaged, potentially leading to severe accidents.
The selection, handling and maintenance of chains and sprockets must
be performed carefully, with close reference to design documentation,
selection criteria and instruction manuals.
If you are uncertain of any point concerning these products, please
contact us for advice and information.
 A Pioneer in the Industrial Chain Business

Our company began manufacturing industrial cast chain in 1911 as Tobata Foundry
Co. in Japan. In 1956 we became part of the Hitachi group and in 1972 Hitachi Chain,
Ltd. was established. The industrial chain business was the foundation on which the
company was built and when we added our building solutions business in 1987, we
became Hitachi Metals Techno, Ltd.
As of January 1st 2016, Hitachi Metals Techno, Ltd. was changed to
SENQCIA CORPORATION.

1911 1956 1972 1987 2016

start chain business Hitachi Metals Hitachi Chain, Ltd. Hitachi Metals
as our former Industries, Ltd. Techno, Ltd.
company

Corporate Logo

Uses the image of “Q” in the new company name SENQCIA to express our
awareness and passion toward “Quality.”
Origin of the Name:
A Japanese word “Senkusha” meaning pioneer.
Represents fine "Sense" and deep dedication towards high "Quality."
The line running to the upper right of the circular shape represents “Earth”
and “Progress,” embodying our will to develop globally.
The dynamic design represents our stance of always being a “pioneer” that
lead the times by creating unique innovative products.
Orange, which conveys activeness and familiarity, and gray, which convey
flexibility and reliability, are used as brand colors.

2
 Corporate Philosophy

We have newly established our desired image and thinking as “SENQClA

PHILOSOPHY.” We will make this the common way to think and advance
among all employees and contribute to the enrichment of society.

SENQCIA PHILOSOPHY

Corporate Philosophy

We will contribute to the development of society through

providing high-quality products and services.

Basic Principle: The Three Promises

1 2 3
Pursue uniqueness Create new values Continue being
and strive for from global a company that
technological perspective employees can be
innovation proud of

Code of Conduct: “HEAT”

“H” Hospitable: Think from customers’ standpoint and strive for the best

“E” Earnest: Act in compliance with laws and social norm

“A” Active: Think independently and challenge with enthusiasm

“T” Tough: Strive for a goal with persistency

3
ROLLER CHAINS

Solid Bushing and Roller Chain outlasts

Conventional Roller Chains
In 2009, SENQCIA went into full production of the new Solid Bushing and Roller Chain across the standard range.
SENQCIA once again were the front runner and introduced new innovations in manufacturing technologies and part
processing which has led to the development of the new Solid Bushing and Roller Chains.
New Solid Bushing and Roller Chain now offers up to 30% increase in Maximum Allowable Load (MAL) compared with
leading competitors.

Comparison Table of Maximum Allowable Load

ANSI
Competitor SENQCIA BS
Competitor SENQCIA
(kN) (kN) (kN) (kN)

35 2.16 2.48 08B N/A※ 3.14

40 3.63 4.17 10B N/A※ 4.90
50 6.37 7.22 12B N/A ※
7.06
60 8.83 10.70 16B 12.60 16.40
80 14.70 19.10 20B 19.60 25.50
100 22.60 29.40 24B 27.50 35.70
120 30.40 39.50 28B 34.30 44.50
140 40.20 52.30 32B 39.20 51.00
160 53.00 69.00
180
200
240
60.80
71.60
99.00
79.00
93.00
129.00
30% UP!
※NOTE:Published data is not avilable

30% UP!
Fundamental Structure of Solid Bushing & Roller Chain
Outstanding longer wear life Pin
Conventional split bushings deform into a barrel Special surface treatment for
shape when side plates are pressed on, leaving only improved fatigue strength RLP & PLP
two-point contact area. Solid Bushing & Roller Wide waist Link Plate for
Chain has extremely cylindrical inside and outside higher fatigue strength
bushing walls resulting in full contact to disperse
bearing pressure. Less pressure ensures excellent
wear resistance.
Up to 2-3 times longer wear life over curled bushings
The curled, split bushings have a seam where tiny
space allows lubricant leakage resulting in shorter
wear life. Solid Bushing & Roller has no seam resulting
Solid Bushing &
in lower bearing pressure allowing the bushings to Solid Roller
retain lubrication resulting in much longer wear life.
Reliable perfomancer
Solid Bushing Roller is cold-forged from steel rod. Cold-forming
process also works with the molecular structure (grain)
of the steel running lengthwise in the bushings thereby Connecting link RLP
increasing fatigue strength as well as preventing Specially processed straight side bar Special processing provides
bushings from breakage, Solid Bushing Roller Chain connecting link plates maintain the same higher fatigue strength
improves performance of transmission with minimizing allowable loads as the chain and make
connecting link identification easier.
elongation for long period of time.

4
 ROLLER CHAINS
Mechanism of how Solid Bushing & Roller Chain
supersedes other competitors for more than 20 years
Solid Bushing & Roller Chain Conventional Chain

ROLLER CHAINS
DOUBLE PITCH
Ordinary Shaped
Solid Roller Roller

Ordinary Curled
Solid Bushing Bushing

HOLLOW PIN CHAINS

Before Assembly After Assembly Before Assembly After Assembly

Solid bushings with tapered ends Bushing ID becomes barrel shaped as

assure near perfectly straight ID a result of press fit and makes uneven

CORROSION RESISTANT
surface after assembly. The ends contact between pin and bushing.
collapse due to press fit resulting in

ROLLER CHAINS
ultra straight bearing surfaces.

Wear Resistance
Solid Bushing & Roller Chain shows HIGHER wear resistance

LEAF CHAINS
MOTOR

56L

■ #80 A Co.
nt 20 nt 20
Elongation of chain length (%)

■ ：
296rpm 296rpm
0.5 ■ 375kgf
ATTACHMENT

■ Lubrication: Only Initial greased

CHAINS

0.4

0.3
B Co.

0.2
TECHNICAL INFORMA-

0.1 SENQCIA

0 24 48 72 96 120 144 168 192 216

TION

TIME (HOURS)

5
ROLLER CHAINS

CF Series SBR Roller Chain

BRAND-NEW Chromium Free Roller Chain
Custom formulated CF coating delivering ecological advancement and significant improvements in wear
resistance.
Built on the solid foundation of Senqcia Roller Chains original premium quality.

Features

CF Series Roller Chains are coated in parts before assembly and offer the user the high corrosion resistance.
Where roller chain is exposed to nature’s rugged elements including rain, salt, sun and wind the CF Series Roller
Chain will ensure the longest available service life.

Environmentally friendly surface treatment without trivalent or hexagonal chromium content.

■Caution must be taken where abrasion can cause the surface coating to be removed.

6
 Comparison chart of corrosion resistant
Salt Spray Test Results（*）

low corrosion rate high

Test time (hours)

0 100-200 400-500 700-800

SENQCIA
CF Series

SENQCIA
Conventional
corrosion
series

Competitor’s
Corrosion
resistant
chain

（*）Salt Spray Test according to JIS Z 2371

Chain Dimensions

Dimensions - mm Average Maximum Average

Chain Roller Pin Plate Ultimate Allowable Chain
Pitch
No. Width Dia. Dia. Length Height Thick. Strength Load Weight
P W R D LR LC L1 L2 H T kN kN kg/m
35 9.525 4.80 * 5.08 3.58 12.00 12.90 6.00 6.90 8.90 1.25 10.80 2.48 0.34
40 12.70 7.95 7.92 3.96 16.50 17.90 8.30 9.60 11.60 1.50 19.10 4.17 0.60
ANSI 50 15.875 9.53 10.16 5.08 20.40 22.00 10.20 11.80 14.50 2.00 31.90 7.22 0.98
60 19.05 12.70 11.91 5.95 25.50 26.90 12.80 14.10 17.40 2.40 43.10 10.70 1.46
80 25.40 15.88 15.88 7.93 32.80 35.10 16.40 18.70 23.40 3.20 78.50 19.10 2.52
08B 12.70 7.75 8.51 4.45 16.70 18.20 8.40 9.80 11.80 1.50 17.80 3.14 0.61
10B 15.875 9.65 10.16 5.08 19.00 20.70 9.50 11.20 14.70 1.65 22.20 4.90 0.89
BS
12B 19.05 11.68 12.07 5.72 22.00 23.60 11.00 12.60 16.10 1.80 28.90 7.06 1.14
16B 25.40 17.02 15.88 8.26 35.10 38.20 17.60 20.60 21.00 3.20 / 4.00 60.00 16.40 2.59

*Bushing Dia.
This coating is available for other kinds of roller chains.
7
ROLLER CHAINS

CONTENTS

ROLLER CHAINS
Standard Roller Chains 10
ANSI Standard Roller Chains 12
BS Standard Roller Chains 25
Heavy Series Roller Chains(H Series) 27
HE Series 28
Straight Sidebar Chains 29
Super Roller Chains 30
Double Capacity Chains 34
Freedom Series Self-Lubricating Chains 36
Lubeless Chains(O-ring Chain) 40
Heavy Duty Drive Chains 41

DOUBLE PITCH ROLLER

CHAINS
Double Pitch Roller Chains(For Drive) 42
Double Pitch Roller Chains(For Conveyor) 43

HOLLOW PIN CHAINS

Hollow Pin Chains 44
Double Pitch Hollow Pin Chains 44
Stainless Hollow Pin Chains 45
Double Pitch Stainless Hollow Pin Chains 45

CORROSION RESISTANT
ROLLER CHAINS
Stainless Steel Chains 46
Nickel-Plated Chains 48
Nickel-Plated Double Pitch Chains 49

8
 ROLLER CHAINS
SIDE BOW CHAINS
Side Bow Chains 50

ROLLER CHAINS
DOUBLE PITCH
Side Bow Double Pitch Chains 50

LEAF CHAINS
Leaf Chains 51

ATTACHMENT CHAINS

HOLLOW PIN CHAINS

ANSI Standard Attachment Chains 54
BS Standard Attachment Chains 56
Double Pitch Attachment Chains 58
Chains with Top Rollers 61
Side Roller Chains 62

TECHNICAL INFORMATION

CORROSION RESISTANT
Trouble Shooting Hints 63

ROLLER CHAINS
Selection of Transmission Roller Chain 65
Installation and Arrangement 71
Lubrication 72
WARNING 73
CAUTION 74

LEAF CHAINS
ATTACHMENT
CHAINS
TECHNICAL INFORMA-
TION

9
ROLLER CHAINS

Standard Roller Chains

HOW TO ORDER NOMENCLATURE
Chain number, type:riveted or cottered, length and
quantity are the necessary information for us to fill in No.100-2(C) 2L K-2
your order. At the very least, the chain pitch, roller
diameter and roller link inside width should be given
if the chain number is unknown. Type of att.

STANDARD PACKING Space of att.

Roller chains are packed for convenient handling and (L=Pitch)
storing. Each 10 feet length is packed in a carton.
Type of pin Iink.

Strand

Chain No.

specifically as possible when ordering a cut length of chain.

CHAIN PARTS CHAIN CONNECTION PARTS

Spring Clip
(Type Sp CL)

Roller Link
(Type R/L)

Cottered
(Type C)

Offset
Pin Link Riveted (Type O/L)
(Type R)

"S" Pin
(Type S)

Pin Link Cottered

(Type C)
Roll Pin

10
CHAIN CONSTRUCTION

ROLLER CHAINS
RIVETED
Riveted chain is assembled by
staking the pin heads on both sides of the
chain.

ROLLER CHAINS
DOUBLE PITCH
SINGLE AND MULTIPLE
On multiple-strand types, all center plates are slip
fitted (clearance-fitted) unless otherwise specified.
COTTERED
Cottered chain is assembled by staking the pin
heads on one side of the chain and drilling a hole in

HOLLOW PIN CHAINS

the other end to accommodate a cotter pin. This
type of chain is easily assembled and disassembled
in the field.

CORROSION RESISTANT
ROLLER CHAINS
Roller chain with connecting link (C/L)
Ordinarily even number of pitches includes a C/L on
one end.

LEAF CHAINS

Roller chain with connecting links (C/L's) on both ends.

For odd pitches (not endless), 2C/L's are
ATTACHMENT

incorporated on request.
Roller chain with offset link (O/L)
CHAINS

When an odd number of pitches is required, a C/L

and an O/L are usually used.
TECHNICAL INFORMA-
TION

Note : If an endless chain assembly is required, specify whether it is to riveted endless or cotter-connected.

11
 ROLLER CHAINS

ANSI Standard Roller Chains

25 (BUSHED CHAIN)

T
L1 D R W LR
LC
L2
T

Dimensions - mm Average Maximum Average

C hain B ushing Pin Plat eUltimate Allowable C hain
Pitc h S trength Load Weight
No. Width Dia. Dia. Length Height Thic k.
P W R D LR LC L1 L2 H T kN kN kg/m
25 6.35 3.10 3.30 2.31 7.60 8.60 3.80 4.80 6.02 0.75 4.40 0.64 0.13

KILOWATT RATING OF
No. of
25 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 100 500 900 1200 1800 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 10000
S mall Lubrication Method
S pkt. A C
9 0.03 0.13 0.23 0.30 0.43 0.57 0.67 0.78 0.76 0.64 0.54 0.47 0.42 0.37 0.33 0.30 0.27 0.25 0.22 0.19
10 0.04 0.15 0.26 0.33 0.48 0.64 0.76 0.87 0.89 0.75 0.64 0.55 0.48 0.43 0.39 0.35 0.31 0.29 0.26 0.22
11 0.04 0.17 0.28 0.37 0.53 0.71 0.84 0.96 1.03 0.87 0.74 0.64 0.56 0.50 0.45 0.40 0.37 0.34 0.31 0.26
12 0.04 0.18 0.31 0.40 0.58 0.78 0.92 1.06 1.17 0.98 0.84 0.72 0.64 0.57 0.51 0.46 0.42 0.38 0.35 0.30
13 0.05 0.20 0.34 0.44 0.63 0.85 1.00 1.15 1.30 1.11 0.95 0.82 0.72 0.64 0.57 0.51 0.47 0.43 0.40 0.34
14 0.05 0.22 0.37 0.48 0.69 0.92 1.09 1.25 1.41 1.24 1.06 0.92 0.81 0.72 0.64 0.57 0.52 0.48 0.44 0.37
15 0.05 0.23 0.40 0.51 0.74 0.99 1.17 1.35 1.52 1.37 1.17 1.01 0.90 0.79 0.71 0.64 0.58 0.53 0.48 0.42
16 0.06 0.25 0.43 0.55 0.79 1.07 1.26 1.44 1.63 1.51 1.29 1.12 0.98 0.87 0.78 0.70 0.64 0.58 0.54 0.46
17 0.06 0.27 0.45 0.59 0.85 1.14 1.34 1.54 1.74 1.66 1.42 1.22 1.07 0.96 0.85 0.77 0.70 0.64 0.59 0.50
18 0.07 0.28 0.48 0.63 0.90 1.21 1.43 1.64 1.85 1.81 1.54 1.34 1.17 1.04 0.93 0.84 0.76 0.69 0.64 0.54
19 0.07 0.30 0.51 0.66 0.96 1.28 1.51 1.74 1.96 1.95 1.67 1.45 1.27 1.13 1.01 0.91 0.83 0.75 0.69 0.59
20 0.07 0.32 0.54 0.70 1.01 1.36 1.60 1.84 2.07 2.11 1.81 1.57 1.37 1.22 1.09 0.98 0.90 0.81 0.75 0.64
21 0.08 0.34 0.57 0.74 1.06 1.43 1.69 1.94 2.18 2.27 1.94 1.69 1.48 1.31 1.17 1.06 0.96 0.87 0.81 0.69
22 0.08 0.35 0.60 0.78 1.12 1.50 1.77 2.04 2.30 2.44 2.08 1.81 1.58 1.40 1.26 1.13 1.03 0.94 0.87 0.74
23 0.09 0.37 0.63 0.82 1.17 1.58 1.86 2.14 2.41 2.61 2.22 1.93 1.69 1.50 1.34 1.21 1.10 1.01 0.93 0.79
24 0.09 0.39 0.66 0.85 1.23 1.65 1.95 2.24 2.52 2.78 2.37 2.06 1.81 1.60 1.43 1.29 1.17 1.07 0.98 0.84
25 0.10 0.41 0.69 0.89 1.28 1.73 2.03 2.34 2.64 2.93 2.52 2.19 1.92 1.70 1.52 1.37 1.25 1.14 1.04 0.90
26 0.10 0.42 0.72 0.93 1.34 1.80 2.12 2.44 2.75 3.06 2.68 2.32 2.04 1.81 1.61 1.45 1.32 1.21 1.11 0.95
28 0.11 0.46 0.78 1.01 1.45 1.95 2.30 2.64 2.98 3.31 2.99 2.59 2.28 2.01 1.81 1.63 1.48 1.35 1.24 1.06
30 0.12 0.49 0.84 1.09 1.56 2.10 2.48 2.85 3.21 3.57 3.32 2.87 2.52 2.24 2.00 1.81 1.64 1.50 1.37 1.17
32 0.12 0.53 0.90 1.16 1.68 2.25 2.66 3.05 3.44 3.83 3.66 3.17 2.78 2.46 2.21 1.99 1.81 1.65 1.51 1.29
35 0.14 0.58 0.99 1.28 1.85 2.48 2.93 3.36 3.79 4.21 4.18 3.62 3.18 2.82 2.52 2.28 2.07 1.89 1.73 1.48
40 0.16 0.67 1.14 1.48 2.13 2.87 3.38 3.88 4.38 4.87 5.10 4.42 3.89 3.45 3.08 2.78 2.52 2.31 2.11 1.81
45 0.18 0.77 1.30 1.68 2.42 3.26 3.84 4.41 4.97 5.53 6.08 5.28 4.63 4.11 3.68 3.32 3.01 2.75 2.52 2.16
A C D
Note: Lubricated types A,B,C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

12
 ROLLER CHAINS
35 (BUSHED CHAIN)
T
L1 D R W LR
LC
L2

ROLLER CHAINS
DOUBLE PITCH
T

T
D R W

TP T
LC LR

HOLLOW PIN CHAINS

TP

CORROSION RESISTANT
P

ROLLER CHAINS
Dimens ions - mm Average Maximum Average
C hain B us hing Pin Plate Trans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
35 12.00 12.90 6.00 6.90 − 10.80 2.48 0.34
35-2 9.525 4.80 5.08 3.58 22.10 23.00 11.10 11.90 8.90 1.25 21.60 3.67 0.63
10.10

LEAF CHAINS
35-3 32.20 33.10 16.10 17.00 32.40 5.40 0.92

KILOWATT RATING OF
No. of
35 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 50 100 300 500 700 900 1200 1500 1800 2100 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
S mall Lubrication Method
S pkt. A B C D
11 0.10 0.20 0.52 0.83 1.12 1.41 1.83 2.23 2.63 3.02 2.88 2.19 1.74 1.42 1.19 1.02 0.88 0.77 0.69 0.61
12 0.11 0.21 0.58 0.91 1.24 1.55 2.01 2.45 2.89 3.32 3.28 2.50 1.98 1.62 1.36 1.16 1.01 0.88 0.78 0.70
13 0.13 0.23 0.63 0.99 1.35 1.69 2.19 2.67 3.15 3.62 3.70 2.82 2.23 1.83 1.53 1.31 1.13 1.00 0.88 0.79
14 0.14 0.25 0.68 1.08 1.46 1.83 2.37 2.90 3.41 3.92 4.14 3.15 2.50 2.04 1.71 1.46 1.27 1.11 0.99 0.88
ATTACHMENT

15 0.15 0.27 0.73 1.16 1.57 1.97 2.55 3.12 3.68 4.23 4.59 3.49 2.77 2.27 1.90 1.62 1.41 1.23 1.09 0.98
16 0.16 0.29 0.79 1.25 1.69 2.11 2.74 3.35 3.94 4.53 5.05 3.84 3.05 2.50 2.09 1.79 1.55 1.36 1.21 1.08
CHAINS

17 0.17 0.31 0.84 1.33 1.80 2.26 2.92 3.57 4.21 4.84 5.54 4.21 3.34 2.73 2.29 1.96 1.70 1.49 1.32 1.18
18 0.18 0.33 0.89 1.41 1.91 2.40 3.11 3.80 4.48 5.14 6.02 4.59 3.64 2.98 2.50 2.13 1.85 1.62 1.44 1.29
19 0.19 0.35 0.95 1.50 2.03 2.54 3.30 4.03 4.75 5.45 6.38 4.98 3.95 3.23 2.71 2.31 2.00 1.76 1.56 1.40
20 0.20 0.37 1.00 1.58 2.14 2.69 3.48 4.26 5.02 5.76 6.74 5.37 4.26 3.49 2.92 2.50 2.16 1.90 1.68 1.51
21 0.21 0.39 1.05 1.67 2.26 2.83 3.67 4.49 5.29 6.08 7.11 5.78 4.59 3.75 3.15 2.69 2.33 2.04 1.81 1.62
22 0.22 0.41 1.11 1.76 2.38 2.98 3.86 4.72 5.56 6.39 7.48 6.20 4.92 4.03 3.37 2.88 2.50 2.19 1.94 1.74
23 0.23 0.43 1.16 1.84 2.49 3.13 4.05 4.95 5.84 6.70 7.84 6.63 5.26 4.30 3.61 3.08 2.67 2.34 2.08 1.86
24 0.24 0.45 1.22 1.93 2.61 3.27 4.24 5.19 6.11 7.02 8.21 7.06 5.61 4.59 3.84 3.28 2.85 2.50 2.21 1.98
25 0.25 0.47 1.27 2.02 2.73 3.42 4.43 5.42 6.39 7.34 8.58 7.51 5.96 4.88 4.09 3.49 3.03 2.65 2.35 2.11
26 0.26 0.49 1.33 2.10 2.85 3.57 4.63 5.65 6.66 7.65 8.95 7.96 6.32 5.17 4.34 3.70 3.21 2.82 2.50 2.23
28 0.29 0.54 1.44 2.28 3.08 3.87 5.01 6.12 7.22 8.29 9.70 8.90 7.06 5.78 4.84 4.14 3.59 3.15 2.79 2.50
30 0.31 0.58 1.55 2.45 3.32 4.17 5.40 6.60 7.78 8.93 10.45 9.87 7.83 6.41 5.37 4.59 3.98 3.49 3.10 2.77
INFORMATION

32 0.33 0.62 1.66 2.63 3.56 4.47 5.79 7.07 8.34 9.58 11.20 10.87 8.63 7.06 5.92 5.05 4.38 3.84 3.41 3.05
TECHNICAL

35 0.37 0.68 1.83 2.90 3.93 4.92 6.38 7.79 9.18 10.55 12.34 12.44 9.87 8.08 6.77 5.78 5.01 4.40 3.90 3.49
40 0.42 0.79 2.12 3.35 4.53 5.68 7.36 9.00 10.61 12.19 14.26 15.20 12.06 9.87 8.27 7.06 6.12 5.37 4.77 4.26
45 0.48 0.89 2.40 3.80 5.15 6.46 8.36 10.22 12.05 13.84 16.19 18.13 14.39 11.78 9.87 8.43 7.31 6.41 5.69 5.09
A B C D
Note: Lubricated types A,B,C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

13
ROLLER CHAINS

40
T
L1 D R W LR
LC
L2
T

T
D R W

TP T
LC LR

TP

Dimens ions - mm Average Maximum Average

C hain R oller Pin Plate Trans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
40 16.50 17.90 8.30 9.60 − 19.10 4.17 0.60
40-2 30.80 32.20 15.40 16.80 38.20 6.17 1.22
12.70 7.95 7.92 3.96 11.60 1.50
40-3 45.00 46.60 22.50 24.10 14.40 57.30 9.08 1.85
40-4 60.00 60.80 30.00 30.80 76.40 12.00 2.46

KILOWATT RATING OF
No. of
40 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 25 50 100 200 300 400 500 700 900 1000 1200 1400 1600 1800 2100 2400 2700 3000 3500
S mall Lubrication Method
S pkt. A B C
11 0.06 0.13 0.25 0.46 0.86 1.24 1.61 1.97 2.66 3.34 3.67 4.32 4.97 4.15 3.48 2.76 2.26 1.89 1.62 1.28
12 0.06 0.15 0.27 0.51 0.95 1.36 1.77 2.16 2.92 3.67 4.03 4.75 5.46 4.73 3.96 3.15 2.58 2.16 1.84 1.46
13 0.07 0.16 0.30 0.55 1.03 1.49 1.93 2.35 3.19 4.00 4.39 5.18 5.95 5.33 4.47 3.55 2.90 2.43 2.08 1.65
14 0.08 0.17 0.32 0.60 1.12 1.61 2.09 2.55 3.45 4.33 4.76 5.61 6.44 5.96 5.00 3.96 3.25 2.72 2.32 1.84
15 0.08 0.19 0.35 0.65 1.20 1.74 2.25 2.75 3.72 4.66 5.13 6.04 6.94 6.61 5.54 4.40 3.60 3.02 2.58 2.04
16 0.09 0.20 0.37 0.69 1.29 1.86 2.41 2.95 3.99 5.00 5.50 6.48 7.44 7.28 6.10 4.84 3.96 3.32 2.84 2.25
17 0.09 0.21 0.40 0.74 1.38 1.99 2.57 3.15 4.26 5.34 5.87 6.92 7.95 7.98 6.69 5.31 4.34 3.64 3.11 2.47
18 0.10 0.23 0.42 0.79 1.47 2.11 2.74 3.35 4.53 5.68 6.25 7.36 8.45 8.69 7.28 5.78 4.73 3.96 3.39 2.69
19 0.10 0.24 0.45 0.83 1.56 2.24 2.90 3.55 4.80 6.02 6.62 7.80 8.96 9.43 7.90 6.27 5.13 4.30 3.67 2.91
20 0.11 0.25 0.47 0.88 1.64 2.37 3.07 3.75 5.08 6.36 7.00 8.25 9.47 10.18 8.53 6.77 5.54 4.64 3.96 3.15
21 0.12 0.27 0.50 0.93 1.73 2.50 3.23 3.95 5.35 6.71 7.38 8.69 9.99 10.95 9.18 7.28 5.96 5.00 4.27 3.39
22 0.12 0.28 0.52 0.98 1.82 2.62 3.40 4.16 5.63 7.05 7.76 9.14 10.50 11.74 9.84 7.81 6.39 5.36 4.57 3.63
23 0.13 0.29 0.55 1.02 1.91 2.75 3.57 4.36 5.90 7.40 8.14 9.59 11.02 12.42 10.52 8.35 6.83 5.73 4.89 3.88
24 0.14 0.31 0.57 1.07 2.00 2.88 3.74 4.57 6.18 7.75 8.52 10.04 11.53 13.01 11.21 8.90 7.28 6.10 5.21 4.14
25 0.14 0.32 0.60 1.12 2.09 3.01 3.90 4.77 6.46 8.10 8.90 10.49 12.05 13.59 11.92 9.46 7.74 6.49 5.54 4.40
26 0.15 0.34 0.63 1.17 2.18 3.14 4.07 4.98 6.74 8.45 9.29 10.95 12.58 14.18 12.64 10.03 8.21 6.88 5.88 4.66
28 0.16 0.36 0.68 1.27 2.36 3.41 4.41 5.39 7.30 9.15 10.06 11.86 13.62 15.36 14.13 11.21 9.18 7.69 6.57 5.21
30 0.17 0.39 0.73 1.37 2.55 3.67 4.75 5.81 7.87 9.86 10.80 12.78 14.68 16.55 15.67 12.44 10.18 8.53 7.28 5.78
32 0.18 0.42 0.78 1.46 2.73 3.93 5.10 6.23 8.43 10.60 11.60 13.70 15.74 17.75 17.27 13.70 11.21 9.40 8.02 6.37
35 0.20 0.46 0.86 1.61 3.01 4.33 5.61 6.86 9.29 11.60 12.80 15.09 17.34 19.55 19.75 15.67 12.83 10.75 9.18 7.28
40 0.23 0.53 1.00 1.86 3.48 5.01 6.49 7.93 10.70 13.50 14.80 17.43 20.03 22.58 24.13 19.15 15.67 13.13 11.21 8.90
45 0.27 0.61 1.13 2.12 3.95 5.69 7.37 9.00 12.20 15.30 16.80 19.80 22.74 25.65 28.51 22.85 18.70 15.67 13.38 10.62
A B C D
Note: Lubricated types A,B,C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

14
 ROLLER CHAINS
50
T
L1 D R W LR
LC
L2

ROLLER CHAINS
DOUBLE PITCH
T

T
D R W

TP T
LC LR

TP

HOLLOW PIN CHAINS

H

CORROSION RESISTANT
ROLLER CHAINS
Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Trans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
50 20.40 22.00 10.20 11.80 − 31.90 7.22 0.98
50-2 38.40 40.00 19.20 20.80 63.80 10.70 2.00
15.875 9.53 10.16 5.08 14.50 2.00
50-3 56.70 58.20 28.40 29.80 18.10 95.70 15.70 3.07

LEAF CHAINS
50-4 75.00 75.70 37.50 38.20 128.00 20.70 3.97

KILOWATT RATING OF
No. of
50 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 25 50 100 200 300 400 500 700 900 1000 1200 1400 1600 1800 2100 2400 2700 3000 3500
S mall Lubrication Method
S pkt. A B C D
11 0.11 0.26 0.48 0.90 1.68 2.42 3.13 3.83 5.18 6.49 7.14 7.64 6.06 4.96 4.16 3.30 2.70 2.26 1.93 1.53
12 0.12 0.28 0.53 0.99 1.84 2.65 3.44 4.20 5.69 7.13 7.84 8.71 6.91 5.66 4.74 3.76 3.08 2.58 2.20 1.75
13 0.14 0.31 0.58 1.08 2.01 2.89 3.75 4.58 6.20 7.78 8.55 9.82 7.79 6.38 5.34 4.24 3.47 2.91 2.48 1.97
14 0.15 0.33 0.62 1.17 2.18 3.13 4.06 4.96 6.72 8.43 9.26 10.90 8.71 7.13 5.97 4.74 3.88 3.25 2.78 2.20
15 0.16 0.36 0.67 1.26 2.34 3.38 4.38 5.35 7.24 9.08 9.98 11.80 9.66 7.90 6.62 5.26 4.30 3.61 3.08 2.44
ATTACHMENT

16 0.17 0.39 0.72 1.35 2.51 3.62 4.69 5.73 7.76 9.73 10.70 12.60 10.60 8.71 7.30 5.79 4.74 3.97 3.39 2.69
17 0.18 0.41 0.77 1.44 2.68 3.87 5.01 6.12 8.29 10.40 11.40 13.50 11.70 9.54 7.99 6.34 5.19 4.35 3.71 2.95
CHAINS

18 0.19 0.44 0.82 1.53 2.85 4.11 5.33 6.51 8.82 11.10 12.20 14.30 12.70 10.40 8.71 6.91 5.66 4.74 4.05 3.21
19 0.20 0.47 0.87 1.62 3.03 4.36 5.65 6.90 9.35 11.70 12.90 15.20 13.80 11.30 9.44 7.49 6.13 5.14 4.39 3.48
20 0.22 0.49 0.92 1.71 3.20 4.61 5.97 7.30 9.88 12.40 13.60 16.00 14.90 12.20 10.20 8.09 6.62 5.55 4.74 3.76
21 0.23 0.52 0.97 1.81 3.37 4.86 6.29 7.69 10.40 13.10 14.40 16.90 16.00 13.10 11.00 8.71 7.13 5.97 5.10 4.05
22 0.24 0.55 1.02 1.90 3.55 5.11 6.62 8.09 10.90 13.70 15.10 17.80 17.20 14.00 11.80 9.34 7.64 6.40 5.47 4.34
23 0.25 0.57 1.07 1.99 3.72 5.36 6.94 8.49 11.50 14.40 15.80 18.70 18.30 15.00 12.60 9.98 8.17 6.85 5.85 4.64
24 0.26 0.60 1.12 2.09 3.90 5.61 7.27 8.89 12.00 15.10 16.60 19.50 19.50 16.00 13.40 10.60 8.71 7.30 6.23 4.94
25 0.27 0.63 1.17 2.18 4.07 5.86 7.60 9.29 12.60 15.80 17.30 20.40 20.80 17.00 14.30 11.30 9.26 7.76 6.62 5.26
26 0.29 0.65 1.22 2.28 4.25 6.12 7.93 9.69 13.10 16.40 18.10 21.30 22.00 18.00 15.10 12.00 9.82 8.23 7.03 5.58
28 0.31 0.71 1.32 2.47 4.60 6.63 8.59 10.50 14.20 17.80 19.60 23.10 24.60 20.20 16.90 13.40 11.00 9.20 7.85 6.23
30 0.33 0.76 1.42 2.66 4.96 7.14 9.25 11.30 15.30 19.20 21.10 24.90 27.30 22.40 18.70 14.90 12.20 10.20 8.71 6.91
32 0.36 0.82 1.53 2.85 5.31 7.66 9.92 12.10 16.40 20.60 22.60 26.70 30.10 24.60 20.60 16.40 13.40 11.20 9.59 7.61
INFORMATION

35 0.39 0.90 1.68 3.14 5.85 8.43 10.90 13.40 18.10 22.70 24.90 29.40 33.70 28.20 23.60 18.70 15.30 12.90 11.00 8.71
TECHNICAL

40 0.46 1.04 1.94 3.62 6.76 9.74 12.60 15.40 20.90 26.20 28.80 33.90 39.00 34.40 28.80 22.90 18.70 15.70 13.40 10.60
45 0.52 1.18 2.21 4.12 7.68 11.10 14.30 17.50 23.70 29.70 32.70 38.50 44.30 41.10 34.40 27.30 22.40 18.70 16.00 12.70
A B C D
Note: Lubricated types A,B,C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

15
ROLLER CHAINS

60
T
L1 D R W LR
LC
L2
T

T
D R W

TP T
LC LR

TP

Dimens ions - mm Average Maximum Average

C hain R oller Pin Plate Trans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
60 25.50 26.90 12.80 14.10 − 43.10 10. 70 1.46
60-2 48.20 49.70 24.00 25.70 86.20 14. 70 2.95
60-3 71.20 72.60 35.20 37.40 129. 00 21.60 4.43
19.05 12.70 11.91 5.95 17.40 2.40
60-4 94.40 95.40 47.20 48.20 22.80 172. 00 28.50 5.92
60-5 117.00 118.20 58.50 59.70 216. 00 33.70 7.41
60-6 140.00 140.90 70.10 70.80 259. 00 39.70 8.90

KILOWATT RATING OF
No. of
60 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 25 50 100 150 200 300 400 500 600 700 800 900 1000 1100 1200 1400 1600 1800 2000
S mall Lubrication Method
S pkt. A B C D
11 0.21 0.48 0.90 1.68 2.42 3.13 4.51 5.85 7.15 8.42 9.68 10.90 12.10 11.60 10.10 8.84 7.02 5.74 4.81 4.11
12 0.23 0.53 0.99 1.84 2.66 3.44 4.96 6.42 7.85 9.25 10.60 12.00 13.30 13.20 11.50 10.10 7.99 6.54 5.48 4.68
13 0.25 0.58 1.08 2.01 2.90 3.75 5.41 7.00 8.56 10.10 11.60 13.10 14.50 14.90 12.90 11.40 9.01 7.38 6.18 5.28
14 0.27 0.63 1.17 2.18 3.14 4.07 5.86 7.59 9.27 10.90 12.60 14.20 15.70 16.70 14.50 12.70 10.10 8.25 6.91 5.90
15 0.30 0.67 1.26 2.35 3.38 4.38 6.31 8.17 9.99 11.80 13.50 15.30 17.00 18.50 16.00 14.10 11.20 9.15 7.66 6.54
16 0.32 0.72 1.35 2.52 3.62 4.70 6.76 8.76 10.70 12.60 14.50 16.40 18.20 20.00 17.70 15.50 12.30 10.10 8.44 7.21
17 0.34 0.77 1.44 2.69 3.87 5.01 7.22 9.36 11.40 13.50 15.50 17.50 19.40 21.30 19.40 17.00 13.50 11.00 9.25 7.90
18 0.36 0.82 1.53 2.86 4.12 5.33 7.68 9.95 12.20 14.30 16.50 18.60 20.60 22.70 21.10 18.50 14.70 12.00 10.10 8.60
19 0.38 0.87 1.62 3.03 4.36 5.65 8.14 10.60 12.90 15.20 17.50 19.70 21.90 24.10 22.90 20.10 15.90 13.00 10.90 9.33
20 0.40 0.92 1.72 3.20 4.61 5.98 8.61 11.20 13.60 16.10 18.50 20.80 23.10 25.40 24.70 21.70 17.20 14.10 11.80 10.10
21 0.42 0.97 1.81 3.38 4.86 6.30 9.07 11.80 14.40 16.90 19.50 21.90 24.40 26.80 26.60 23.30 18.50 15.10 12.70 10.80
22 0.45 1.02 1.90 3.55 5.11 6.62 9.54 12.40 15.10 17.80 20.50 23.10 25.60 28.20 28.50 25.00 19.80 16.20 13.60 11.60
23 0.47 1.07 2.00 3.72 5.36 6.95 10.00 13.00 15.90 18.70 21.50 24.20 26.90 29.60 30.50 26.70 21.20 17.40 14.60 12.40
24 0.49 1.12 2.09 3.90 5.62 7.28 10.50 13.60 16.60 19.60 22.50 25.30 28.20 31.00 32.50 28.50 22.60 18.50 15.50 13.20
25 0.51 1.17 2.18 4.08 5.87 7.60 11.00 14.20 17.30 20.40 23.50 26.50 29.40 32.40 34.50 30.30 24.00 19.70 16.50 14.10
26 0.54 1.22 2.28 4.25 6.12 7.93 11.40 14.80 18.10 21.30 24.50 27.60 30.70 33.80 36.60 32.10 25.50 20.90 17.50 14.90
28 0.58 1.32 2.47 4.61 6.63 8.59 12.40 16.00 19.60 23.10 26.50 29.90 33.30 36.60 39.90 35.90 28.50 23.30 19.50 16.70
30 0.62 1.42 2.66 4.96 7.15 9.26 13.30 17.30 21.10 24.90 28.60 32.20 35.80 39.40 42.90 39.80 31.60 25.90 21.70 18.50
32 0.67 1.53 2.85 5.32 7.66 9.93 14.30 18.50 22.60 26.70 30.70 34.60 38.40 42.30 46.00 43.90 34.80 28.50 23.90 20.40
35 0.74 1.68 3.14 5.86 8.44 10.90 15.80 20.40 24.90 29.40 33.80 38.10 42.30 46.60 50.70 50.20 39.80 32.60 27.30 23.30
40 0.85 1.94 3.63 6.77 9.75 12.60 18.20 23.60 28.80 34.00 39.00 44.00 48.90 53.80 58.60 61.30 48.70 39.80 33.40 28.50
45 0.97 2.21 4.12 7.69 11.07 14.30 20.70 26.80 32.70 38.60 44.30 50.00 55.50 61.10 66.50 72.00 58.10 47.50 39.80 34.00
A B C D
Note: Lubricated types A,B,C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

16
 ROLLER CHAINS
80
T T
L1 L1D D
R R LR LR
WW
LC LC
L2 L2

ROLLER CHAINS
DOUBLE PITCH
T T

T T
DD R R WW

TPTP T T
LC L C LR LR
TPTP

HOLLOW PIN CHAINS

H H

P P

Dimens ions - mm

CORROSION RESISTANT
Average Maximum Average
C hain R oller Pin Plate Trans . Ultimate Allowable C hain

ROLLER CHAINS
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
80 32.80 35.10 16.40 18.70 − 78.50 19.10 2.52
80-2 61.60 64.50 30.80 33.70 157. 00 25.00 5.10
80-3 90.90 94.10 45.50 48.60 236. 00 36.80 7.68
25.40 15.88 15.88 7.93 23.40 3.20
80-4 120.40 123.50 60.20 63.30 29.30 314. 00 48.50 10.25
80-5 149.80 152.80 74.90 77.90 393. 00 57.30 12.84

LEAF CHAINS
80-6 179.10 182.10 89.60 92.50 471. 00 67.60 15.42

KILOWATT RATING OF
No. of
80 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 25 50 100 150 200 300 400 500 600 700 800 900 1000 1100 1200 1400 1600 1800 2000
S mall Lubrication Method
S pkt. A B C D
11 0.66 1.51 2.82 5.27 7.59 9.83 14.20 18.30 22.40 26.40 25.00 20.40 17.10 14.60 12.70 11.10 8.83 7.23 6.06 5.17
12 0.73 1.66 3.10 5.79 8.34 10.80 15.60 20.20 24.60 29.00 28.50 23.30 19.50 16.70 14.50 12.70 10.10 8.24 6.90 5.89
13 0.79 1.81 3.38 6.31 9.09 11.80 17.00 22.00 26.90 31.70 32.10 26.30 22.00 18.80 16.30 14.30 11.30 9.29 7.78 6.65
14 0.86 1.96 3.66 6.84 9.85 12.80 18.40 23.80 29.10 34.30 35.90 29.40 24.60 21.00 18.20 16.00 12.70 10.40 8.70 7.43
ATTACHMENT

15 0.93 2.12 3.95 7.37 10.60 13.70 19.80 25.60 31.40 36.90 39.80 32.60 27.30 23.30 20.20 17.70 14.10 11.50 9.65 8.24
16 0.99 2.27 4.23 7.90 11.40 14.70 21.20 27.50 33.60 39.60 43.80 35.90 30.10 25.70 22.20 19.50 15.50 12.70 10.60 9.07
CHAINS

17 1.06 2.42 4.52 8.43 12.10 15.70 22.70 29.40 35.90 42.30 48.00 39.30 32.90 28.10 24.40 21.40 17.00 13.90 11.60 9.94
18 1.13 2.58 4.81 8.97 12.90 16.70 24.10 31.20 38.20 45.00 51.70 42.80 35.90 30.60 26.50 23.30 18.50 15.10 12.70 10.80
19 1.20 2.73 5.10 9.51 13.70 17.70 25.60 33.10 40.50 47.70 54.80 46.40 38.90 33.20 28.80 25.30 20.10 16.40 13.80 11.70
20 1.27 2.89 5.39 10.00 14.50 18.80 27.00 35.00 42.80 50.40 57.90 50.10 42.00 35.90 31.10 27.30 21.70 17.70 14.90 12.70
21 1.33 3.04 5.68 10.60 15.30 19.80 28.50 36.90 45.10 53.10 61.00 53.90 45.20 38.60 33.50 29.40 23.30 19.10 16.00 13.60
22 1.40 3.20 5.97 11.10 16.00 20.80 29.90 38.80 47.40 55.90 64.20 57.80 48.50 41.40 35.90 31.50 25.00 20.40 17.10 14.60
23 1.47 3.36 6.26 11.70 16.80 21.80 31.40 40.70 49.70 58.60 67.30 61.80 51.80 44.20 38.30 33.70 26.70 21.90 18.30 15.60
24 1.54 3.51 6.56 12.20 17.60 22.80 32.90 42.60 52.10 61.40 70.50 65.90 55.20 47.20 40.90 35.90 28.50 23.30 19.50 16.70
25 1.61 3.67 6.85 12.80 18.40 23.90 34.40 44.50 54.40 64.10 73.70 70.10 58.70 50.10 43.50 38.10 30.30 24.80 20.80 17.70
26 1.68 3.83 7.15 13.30 19.20 24.90 35.90 46.50 56.80 66.90 76.90 74.30 62.30 53.20 46.10 40.40 32.10 26.30 22.00 18.80
28 1.82 4.15 7.75 14.50 20.80 27.00 38.80 50.30 61.50 72.50 83.30 83.00 69.60 59.40 51.50 45.20 35.90 29.40 24.60 21.00
30 1.96 4.47 8.34 15.60 22.40 29.10 41.90 54.20 66.30 78.10 89.70 92.10 77.20 65.90 57.10 50.10 39.80 32.60 27.30 23.30
INFORMATION

32 2.10 4.79 8.95 16.70 24.00 31.20 44.90 58.10 71.10 83.70 96.20 101.00 85.00 72.60 62.90 55.20 43.80 35.90 30.10 25.70
TECHNICAL

35 2.32 5.28 9.86 18.40 26.50 34.30 49.40 64.00 78.30 92.20 106.00 116.00 97.30 83.00 72.00 63.20 50.10 41.00 34.40 29.40
40 2.67 6.10 11.40 21.20 30.60 39.60 57.10 74.00 90.40 107.00 122.00 138.00 119.00 101.00 87.90 77.20 61.20 50.10 42.00 35.90
45 3.04 6.93 12.90 24.10 34.80 45.00 64.80 84.00 103.00 121.00 139.00 157.00 142.00 121.00 105.00 92.10 73.10 59.80 50.10 42.80
A B C D
Note: Lubricated types A,B,C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

17
ROLLER CHAINS

100
T
L1 D
R W LR
LC
L2
T

T
D R W

TP T
LC LR
TP

Dimens ions - mm Average Maximum Average

C hain R oller Pin Plate Trans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
100 39.40 43.00 19.70 23.30 − 118.00 29.40 3.84
100-2 75.10 78.80 37.60 41.20 236.00 38.40 7.74
100-3 110.90 114.60 55.50 59.10 354.00 56.50 11.58
31.75 19.05 19.05 9.53 29.30 4.00
100-4 147.40 150.80 73.70 77.10 35.80 471.00 74.40 15.06
100-5 183.00 186.60 91.50 95.10 590.00 88.10 19.26
100-6 218.80 222.40 109.40 113.00 708.00 104.00 23.10

KILOWATT RATING OF
No. of
100 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 25 50 100 150 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1800
S mall Lubrication Method
S pkt. A B C D
11 1.27 2.90 5.41 10.10 14.50 18.80 27.10 35.10 43.00 37.60 29.90 24.40 20.50 17.50 15.20 13.30 11.80 10.60 9.50 7.20
12 1.40 3.18 5.94 11.10 16.00 20.70 29.80 38.60 47.20 42.90 34.00 27.90 23.30 19.90 17.30 15.20 13.40 12.00 10.80 8.30
13 1.52 3.47 6.48 12.10 17.40 22.60 32.50 42.10 51.50 48.40 38.40 31.40 26.30 22.50 19.50 17.10 15.20 13.60 12.20 9.30
14 1.65 3.76 7.02 13.10 18.90 24.40 35.20 45.60 55.70 54.00 42.90 35.10 29.40 25.10 21.80 19.10 16.90 15.20 13.70 10.40
15 1.78 4.05 7.56 14.10 20.30 26.30 37.90 49.10 60.10 59.90 47.60 38.90 32.60 27.90 24.10 21.20 18.80 16.80 15.20 11.50
16 1.90 4.34 8.11 15.10 21.80 28.20 40.70 52.70 64.40 66.00 52.40 42.90 35.90 30.70 26.60 23.30 20.70 18.50 16.70 12.70
17 2.03 4.64 8.65 16.10 23.30 30.10 43.40 56.20 68.70 72.30 57.40 47.00 39.40 33.60 29.10 25.60 22.70 20.30 18.30 13.90
18 2.16 4.93 9.21 17.20 24.70 32.10 46.20 59.80 73.10 78.80 62.50 51.20 42.90 36.60 31.70 27.90 24.70 22.10 19.90 15.20
19 2.29 5.23 9.76 18.20 26.20 34.00 48.90 63.40 77.50 85.40 67.80 55.50 46.50 39.70 34.40 30.20 26.80 24.00 21.60 16.40
20 2.42 5.53 10.30 19.20 27.70 35.90 51.70 67.00 81.90 92.30 73.20 59.90 50.20 42.90 37.20 32.60 28.90 25.90 23.30 17.80
21 2.55 5.83 10.90 20.30 29.20 37.90 54.50 70.70 86.40 99.30 78.80 64.50 54.00 46.10 40.00 35.10 31.10 27.90 25.10 19.10
22 2.69 6.13 11.40 21.30 30.70 39.80 57.30 74.30 90.80 106.00 84.50 69.10 57.90 49.50 42.90 37.60 33.40 29.90 26.90 20.50
23 2.82 6.43 12.00 22.40 32.20 41.80 60.20 77.90 95.30 112.00 90.30 73.90 61.90 52.90 45.80 40.20 35.70 31.90 28.80 21.90
24 2.95 6.73 12.60 23.40 33.80 43.70 63.00 81.60 99.80 118.00 96.20 78.80 66.00 56.40 48.90 42.90 38.00 34.00 30.70 23.30
25 3.08 7.03 13.10 24.50 35.30 45.70 65.80 85.30 104.00 123.00 102.00 83.80 70.20 59.90 51.90 45.60 40.40 36.20 32.60 24.80
26 3.22 7.34 13.70 25.60 36.80 47.70 68.70 89.00 109.00 128.00 109.00 88.80 74.40 63.60 55.10 48.40 42.90 38.40 34.60 26.30
28 3.48 7.95 14.80 27.70 39.90 51.70 74.40 96.40 118.00 139.00 121.00 99.30 83.20 71.00 61.60 54.00 47.90 42.90 38.70 29.40
30 3.75 8.56 16.00 29.80 43.00 55.70 80.20 104.00 127.00 150.00 135.00 110.00 92.30 78.80 68.30 59.90 53.10 47.60 42.90 32.60
32 4.03 9.18 17.10 32.00 46.10 59.70 85.90 111.00 136.00 160.00 148.00 121.00 102.00 86.80 75.20 66.00 58.50 52.40 47.20 35.90
35 4.43 10.10 18.90 35.20 50.70 65.70 94.70 123.00 150.00 177.00 170.00 139.00 116.00 99.30 86.00 75.50 67.00 59.90 54.00 41.10
40 5.12 11.70 21.80 40.70 58.60 75.90 109.00 142.00 173.00 204.00 207.00 170.00 142.00 121.00 105.00 92.30 81.80 73.20 66.00 50.20
45 5.82 13.30 24.80 46.20 66.60 86.20 124.00 161.00 197.00 232.00 247.00 202.00 170.00 145.00 125.00 110.00 97.60 87.40 78.80 59.90
A B C D
Note: Lubricated types A, B, C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

18
 ROLLER CHAINS
120
T
L1 D
R W LR
LC
L2

ROLLER CHAINS
T

DOUBLE PITCH
T
D R W

TP T
LC LR
TP

HOLLOW PIN CHAINS

H

Dimens ions - mm Average Maximum Average

CORROSION RESISTANT
C hain R oller Pin Plate Trans . Ultimate Allowable C hain

ROLLER CHAINS
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
120 49.50 53.40 24.80 28.60 − 167.00 39.50 5.76
120-2 94.90 98.80 47.50 51.30 334.00 51.70 11.49
120-3 140.30 144.20 70.20 74.00 501.00 76.00 17.20
38.10 25.40 22.23 11.10 35.10 4.80
120-4 186.10 190.00 93.10 96.90 45.40 668.00 100.00 22.92
120-5 231.50 235.40 115.80 119.60 835.00 119.00 28.65

LEAF CHAINS
120-6 276.90 280.80 138.50 142.30 1002.00 140.00 34.36

KILOWATT RATING OF
No. of
120 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 25 50 100 150 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400
S mall Lubrication Method
S pkt. A B C D
11 2.04 4.66 8.70 16.20 23.40 30.30 43.60 56.50 57.20 43.50 34.60 28.30 23.70 20.20 17.50 15.40 13.70 12.20
12 2.24 5.12 9.55 17.80 25.70 33.30 47.90 62.10 65.20 49.60 39.40 32.20 27.00 23.10 20.00 17.50 15.60 13.90
13 2.45 5.58 10.40 19.40 28.00 36.30 52.20 67.70 73.50 55.90 44.40 36.30 30.50 26.00 22.50 19.80 17.50 15.70
14 2.65 6.05 11.30 21.10 30.30 39.30 56.60 73.30 82.20 62.50 49.60 40.60 34.00 29.10 25.20 22.10 19.60 17.50
15 2.86 6.52 12.20 22.70 32.70 42.30 61.00 79.00 91.10 69.30 55.00 45.00 37.70 32.20 27.90 24.50 21.70 19.50
ATTACHMENT

16 3.06 6.99 13.00 24.30 35.00 45.40 65.40 84.70 100.00 76.40 60.60 49.60 41.60 35.50 30.80 27.00 24.00 21.40
17 3.27 7.46 13.90 26.00 37.40 48.50 69.80 90.40 110.00 83.70 66.40 54.30 45.50 38.90 33.70 29.60 26.20 23.50
CHAINS

18 3.48 7.93 14.80 27.60 39.80 51.60 74.30 96.20 118.00 91.10 72.30 59.20 49.60 42.40 36.70 32.20 28.60 25.60
19 3.69 8.41 15.70 29.30 42.20 54.70 78.70 102.00 125.00 98.80 78.40 64.20 53.80 45.90 39.80 34.90 31.00 27.70
20 3.90 8.89 16.60 31.00 44.60 57.80 83.20 108.00 132.00 107.00 84.70 69.30 58.10 49.60 43.00 37.70 33.50 30.00
21 4.11 9.37 17.50 32.60 47.00 60.90 87.70 114.00 139.00 115.00 91.10 74.60 62.50 53.40 46.30 40.60 36.00 32.20
22 4.32 9.85 18.40 34.30 49.40 64.00 92.20 119.00 146.00 123.00 97.70 80.00 67.00 57.20 49.60 43.50 38.60 34.60
23 4.53 10.30 19.30 36.00 51.90 67.20 96.80 125.00 153.00 132.00 104.00 85.50 71.70 61.20 53.00 46.50 41.30 36.90
24 4.75 10.80 20.20 37.70 54.30 70.30 101.00 131.00 160.00 140.00 111.00 91.10 76.40 65.20 56.50 49.60 44.00 39.40
25 4.96 11.30 21.10 39.40 56.70 73.50 106.00 137.00 168.00 149.00 118.00 96.90 81.20 69.30 60.10 52.70 46.80 41.90
26 5.17 11.80 22.00 41.10 59.20 76.70 110.00 143.00 175.00 158.00 126.00 103.00 86.10 73.50 63.70 55.90 49.60 44.40
28 5.60 12.80 23.90 44.50 64.10 83.10 120.00 155.00 190.00 177.00 140.00 115.00 96.30 82.20 71.20 62.50 55.40 49.60
30 6.04 13.80 25.70 48.00 69.10 89.50 129.00 167.00 204.00 196.00 156.00 127.00 107.00 91.10 79.00 69.30 61.50 55.00
32 6.47 14.80 27.60 51.40 74.10 96.00 138.00 179.00 219.00 216.00 171.00 140.00 118.00 100.00 87.00 76.40 67.70 60.60
INFORMATION
TECHNICAL

35 7.13 16.30 30.40 56.70 81.60 106.00 152.00 197.00 241.00 247.00 196.00 161.00 135.00 115.00 99.60 87.40 77.50 69.30
40 8.24 18.80 35.10 65.40 94.30 122.00 176.00 228.00 279.00 302.00 240.00 196.00 164.00 140.00 122.00 107.00 94.70 84.70
45 9.36 21.30 39.80 74.30 107.00 139.00 200.00 259.00 316.00 360.00 286.00 234.00 196.00 167.00 145.00 127.00 113.00 101.00
A B C D
Note: Lubricated types A, B, C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

19
ROLLER CHAINS

140
T
L1 D
R W LR
LC
L2
T

T
D R W

TP T
LC LR
TP

Dimens ions - mm Average Maximum Average

C hain R oller Pin PlateTrans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
140 54.00 58.30 27.00 31.30 − 216.00 52.30 7.41
140-2 102.90 107.20 51.50 55.70 432.00 68.30 14.63
44.45 25.40 25.40 12.70 40.90 5.60
140-3 151.70 156.30 75.90 80.40 48.90 648.00 101.00 21.91
140-4 201.20 205.50 100.60 104.90 864.00 133.00 29.17

KILOWATT RATING OF
No. of
140 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 25 50 100 150 200 250 300 350 400 450 500 550 600 700 800 900 1000
S mall Lubrication Method
S pkt. A B C D
11 3.16 7.21 13.50 25.10 36.20 46.90 57.30 67.50 77.50 87.40 75.80 64.80 56.10 49.30 39.10 32.00 26.80 22.90
12 3.47 7.92 14.80 27.60 39.70 51.50 62.90 74.10 85.20 96.10 86.40 73.80 64.00 56.10 44.50 36.50 30.60 26.10
13 3.79 8.64 16.10 30.10 43.30 56.10 68.60 80.80 92.90 105.00 97.40 83.20 72.10 63.30 50.20 41.10 34.40 29.40
14 4.10 9.36 17.50 32.60 46.90 60.80 74.30 87.60 101.00 113.00 109.00 93.00 80.60 70.70 56.10 45.90 38.50 32.90
15 4.42 10.10 18.80 35.10 50.60 65.50 80.10 94.40 108.00 122.00 121.00 103.00 89.40 78.40 62.20 50.90 42.70 36.50
16 4.74 10.80 20.20 37.60 54.20 70.20 85.90 101.00 116.00 131.00 133.00 114.00 98.50 86.40 68.60 56.10 47.00 40.20
17 5.06 11.50 21.50 40.20 57.90 75.00 91.70 108.00 124.00 140.00 146.00 124.00 108.00 94.60 75.10 61.50 51.50 44.00
18 5.38 12.30 22.90 42.70 61.60 79.80 97.50 115.00 132.00 149.00 159.00 136.00 117.00 103.00 81.80 67.00 56.10 47.90
19 5.70 13.00 24.30 45.30 65.30 84.60 103.00 122.00 140.00 158.00 172.00 147.00 127.00 112.00 88.70 72.60 60.90 52.00
20 6.03 13.80 25.70 47.90 69.00 89.40 109.00 129.00 148.00 167.00 185.00 159.00 138.00 121.00 95.80 78.40 65.70 56.10
21 6.36 14.50 27.10 50.50 72.70 94.20 115.00 136.00 156.00 176.00 195.00 171.00 148.00 130.00 103.00 84.40 70.70 60.40
22 6.68 15.20 28.40 53.10 76.50 99.10 121.00 143.00 164.00 185.00 206.00 183.00 159.00 139.00 111.00 90.50 75.80 64.80
23 7.01 16.00 29.80 55.70 80.20 104.00 127.00 150.00 172.00 194.00 216.00 196.00 170.00 149.00 118.00 96.70 81.10 69.20
24 7.34 16.70 31.30 58.30 84.00 109.00 133.00 157.00 180.00 203.00 226.00 209.00 181.00 159.00 126.00 103.00 86.40 73.80
25 7.67 17.50 32.70 60.90 87.80 114.00 139.00 164.00 188.00 212.00 236.00 222.00 192.00 169.00 134.00 110.00 91.90 78.40
26 8.00 18.30 34.10 63.60 91.60 119.00 145.00 171.00 196.00 221.00 246.00 235.00 204.00 179.00 142.00 116.00 97.40 83.20
28 8.67 19.80 36.90 68.90 99.20 129.00 157.00 185.00 213.00 240.00 267.00 263.00 228.00 200.00 159.00 130.00 109.00 93.00
30 9.34 21.30 39.80 74.20 107.00 138.00 169.00 199.00 229.00 258.00 287.00 292.00 253.00 222.00 176.00 144.00 121.00 103.00
32 10.00 22.80 42.60 79.60 115.00 148.00 182.00 214.00 246.00 277.00 308.00 321.00 278.00 244.00 194.00 159.00 133.00 114.00
35 11.00 25.20 47.00 87.70 126.00 164.00 200.00 236.00 271.00 305.00 339.00 368.00 319.00 280.00 222.00 182.00 152.00 130.00
40 12.70 29.10 54.30 101.00 146.00 189.00 231.00 272.00 313.00 353.00 392.00 431.00 389.00 342.00 271.00 222.00 186.00 159.00
45 14.50 33.00 61.60 115.00 166.00 215.00 262.00 309.00 355.00 400.00 445.00 489.00 464.00 408.00 323.00 265.00 222.00 189.00
B C D
Note: Lubricated types A, B, C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

20
 ROLLER CHAINS
160
T
L1 D
R W LR
LC
L2

ROLLER CHAINS
DOUBLE PITCH
T

T
D R W

TP T
LC LR
TP

HOLLOW PIN CHAINS

H

CORROSION RESISTANT
ROLLER CHAINS
Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Trans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
160 64.30 68.70 32.20 36.50 − 275.00 69.00 9.79
160-2 122.80 127.20 61.40 65.80 550.00 90.10 19.45
50.80 31.75 28.58 14.28 46.70 6.40
160-3 181.30 185.70 90.70 95.00 58.50 825.00 133.00 29.17

LEAF CHAINS
160-4 240.30 244.70 120.20 124.50 1100.00 175.00 38.77

KILOWATT RATING OF
No. of
160 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 25 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800
S mall Lubrication Method
S pkt. A B C D
11 4.80 10.90 20.30 37.80 54.40 70.50 86.20 102.00 117.00 101.00 84.40 72.10 62.50 54.80 48.60 43.50 39.20 35.60
12 5.20 11.90 22.30 41.50 59.80 77.50 94.70 112.00 128.00 115.00 96.20 82.10 71.20 62.50 55.40 49.60 44.70 40.60
13 5.70 13.00 24.30 45.30 65.20 84.50 103.00 122.00 140.00 129.00 108.00 92.60 80.20 70.40 62.50 55.90 50.40 45.70
14 6.20 14.10 26.30 49.00 70.60 91.50 112.00 132.00 151.00 145.00 121.00 103.00 89.70 78.70 69.80 62.50 56.30 51.10
15 6.70 15.20 28.30 52.80 76.10 98.60 121.00 142.00 163.00 160.00 134.00 115.00 99.00 87.30 77.40 69.30 62.50 56.70
ATTACHMENT

16 7.10 16.30 30.40 56.70 81.60 106.00 129.00 152.00 175.00 177.00 148.00 126.00 110.00 96.20 85.30 76.30 68.80 62.50
17 7.60 17.40 32.40 60.50 87.10 113.00 138.00 163.00 187.00 193.00 162.00 138.00 120.00 105.00 93.40 83.60 75.40 68.40
CHAINS

18 8.10 18.50 34.50 64.30 92.70 120.00 147.00 173.00 199.00 211.00 177.00 151.00 131.00 115.00 102.00 91.00 82.10 74.50
19 8.60 19.60 36.60 68.20 98.20 127.00 156.00 183.00 211.00 229.00 192.00 164.00 142.00 124.00 110.00 98.70 89.00 80.80
20 9.10 20.70 38.60 72.10 104.00 135.00 164.00 194.00 223.00 247.00 207.00 177.00 153.00 134.00 119.00 107.00 96.20 87.30
21 9.60 21.80 40.70 76.00 109.00 142.00 173.00 204.00 235.00 265.00 223.00 190.00 165.00 145.00 128.00 115.00 103.00 93.90
22 10.10 22.90 42.80 79.90 115.00 149.00 182.00 215.00 247.00 278.00 239.00 204.00 177.00 155.00 137.00 123.00 111.00 101.00
23 10.60 24.10 44.90 83.80 121.00 156.00 191.00 225.00 259.00 292.00 255.00 218.00 189.00 166.00 147.00 132.00 119.00 108.00
24 11.10 25.20 47.00 87.80 126.00 164.00 200.00 236.00 271.00 306.00 272.00 232.00 201.00 177.00 157.00 140.00 126.00 115.00
25 11.50 26.30 49.20 91.70 132.00 171.00 209.00 247.00 283.00 319.00 289.00 247.00 214.00 188.00 167.00 149.00 134.00 122.00
26 12.00 27.50 51.30 95.70 138.00 179.00 218.00 257.00 296.00 333.00 307.00 262.00 227.00 199.00 177.00 158.00 143.00 129.00
28 13.10 29.80 55.60 104.00 149.00 193.00 237.00 279.00 320.00 361.00 343.00 293.00 254.00 223.00 197.00 177.00 159.00 145.00
30 14.10 32.10 59.90 112.00 161.00 208.00 255.00 300.00 345.00 389.00 380.00 325.00 281.00 247.00 219.00 196.00 177.00 160.00
32 15.10 34.40 64.20 120.00 173.00 223.00 273.00 322.00 370.00 417.00 419.00 358.00 310.00 272.00 241.00 216.00 195.00 177.00
INFORMATION

35 16.60 37.90 70.70 132.00 190.00 246.00 301.00 355.00 407.00 459.00 479.00 409.00 354.00 311.00 276.00 247.00 223.00 202.00
TECHNICAL

40 19.20 43.80 81.70 152.00 220.00 284.00 348.00 410.00 471.00 531.00 585.00 500.00 433.00 380.00 337.00 302.00 272.00 247.00
45 21.80 49.70 92.70 173.00 249.00 323.00 395.00 465.00 534.00 603.00 670.00 596.00 517.00 454.00 402.00 360.00 325.00 295.00
B C D
Note: Lubricated types A, B, C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

21
ROLLER CHAINS

180
T
L1 D
R W LR
LC
L2
T

T
D R W

TP T
LC LR
TP

Dimens ions - mm Average Maximum Average

C hain R oller Pin Plate Trans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
180 72.50 78.40 36.30 42.10 − 353.00 79.00 13.39
180-2 138.20 144.00 69.10 74.90 706.00 98.40 26.62
57.15 35.70 35.70 17.45 52.50 7.20
180-3 204.50 210.20 102.30 107.90 65.80 1059.00 145.00 39.85
180-4 270.20 275.90 135.10 140.80 1412.00 191.00 53.08

KILOWATT RATING OF
No. of
180 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 25 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800
S mall Lubrication Method
S pkt. A B C D
9 5.10 11.60 21.70 40.50 58.34 75.60 92.40 109.00 100.00 81.90 68.60 58.60 50.80 44.60 39.50 35.40 31.90 29.00
10 5.70 13.00 24.30 45.40 65.37 84.70 104.00 122.00 117.00 95.90 80.40 68.60 59.50 52.20 46.30 41.40 37.40 33.90
11 6.30 14.40 27.00 50.30 72.46 93.90 115.00 135.00 135.00 111.00 92.70 79.20 68.60 60.20 53.40 47.80 43.10 39.10
12 7.00 15.90 29.60 55.30 79.60 103.00 126.00 149.00 154.00 126.00 106.00 90.20 78.20 68.60 60.90 54.50 49.10 44.60
13 7.60 17.30 32.30 60.30 86.79 112.00 137.00 162.00 174.00 142.00 119.00 102.00 88.20 77.40 68.60 61.40 55.40 50.30
14 8.20 18.70 35.00 65.30 94.02 122.00 149.00 175.00 194.00 159.00 133.00 114.00 98.50 86.50 76.70 68.60 61.90 56.20
15 8.90 20.20 37.70 70.30 101.00 131.00 160.00 189.00 215.00 176.00 148.00 126.00 109.00 95.90 85.10 76.10 68.60 62.30
16 9.50 21.70 40.40 75.40 109.00 141.00 172.00 203.00 233.00 194.00 163.00 139.00 120.00 106.00 93.70 83.80 75.60 68.60
17 10.10 23.10 43.10 80.50 116.00 150.00 184.00 216.00 249.00 213.00 178.00 152.00 132.00 116.00 103.00 91.80 82.80 75.20
18 10.80 24.60 45.90 85.60 123.00 160.00 195.00 230.00 264.00 232.00 194.00 166.00 144.00 126.00 112.00 100.00 90.20 81.90
19 11.40 26.10 48.60 90.80 131.00 169.00 207.00 244.00 280.00 251.00 210.00 180.00 156.00 137.00 121.00 108.00 97.80 88.80
20 12.10 27.60 51.40 95.90 138.00 179.00 219.00 258.00 296.00 271.00 227.00 194.00 168.00 148.00 131.00 117.00 106.00 95.90
21 12.70 29.00 54.20 101.00 146.00 189.00 231.00 272.00 312.00 292.00 245.00 209.00 181.00 159.00 141.00 126.00 114.00 103.00
22 13.40 30.50 57.00 106.00 153.00 198.00 243.00 286.00 328.00 313.00 262.00 224.00 194.00 170.00 151.00 135.00 122.00 111.00
23 14.00 32.00 59.80 112.00 161.00 208.00 255.00 300.00 345.00 335.00 280.00 239.00 207.00 182.00 161.00 145.00 130.00 118.00
24 14.70 33.50 62.60 117.00 168.00 218.00 266.00 314.00 361.00 357.00 299.00 255.00 221.00 194.00 172.00 154.00 139.00 126.00
25 15.40 35.10 65.40 122.00 176.00 228.00 279.00 328.00 377.00 379.00 318.00 271.00 235.00 206.00 183.00 164.00 148.00 134.00
26 16.00 36.60 68.30 127.00 183.00 238.00 291.00 342.00 393.00 402.00 337.00 288.00 249.00 219.00 194.00 174.00 157.00 142.00
28 17.40 39.60 73.90 138.00 199.00 257.00 315.00 371.00 426.00 449.00 377.00 322.00 279.00 245.00 217.00 194.00 175.00 159.00
30 18.70 42.70 79.70 149.00 214.00 277.00 339.00 400.00 459.00 498.00 418.00 357.00 309.00 271.00 241.00 215.00 194.00 176.00
32 20.10 45.80 85.40 159.00 230.00 297.00 364.00 428.00 492.00 549.00 460.00 393.00 340.00 299.00 265.00 237.00 214.00 194.00
35 22.10 50.40 94.10 176.00 253.00 328.00 401.00 472.00 542.00 611.00 526.00 449.00 389.00 342.00 303.00 271.00 245.00 222.00
40 25.50 58.20 109.00 203.00 292.00 378.00 463.00 545.00 626.00 706.00 643.00 549.00 476.00 418.00 370.00 331.00 299.00 271.00
45 29.00 66.10 123.00 230.00 332.00 430.00 525.00 619.00 711.00 802.00 767.00 655.00 568.00 498.00 442.00 395.00 357.00 324.00
B C D
Note: Lubricated types A, B, C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

22
 ROLLER CHAINS
200
T
L1 D
R W LR
LC
L2

ROLLER CHAINS
DOUBLE PITCH
T

T
D R W

TP T
LC LR
TP

HOLLOW PIN CHAINS

H

CORROSION RESISTANT
ROLLER CHAINS
Dimens ions - mm Average Maximum Average
C hain R oller Pin Trans . Ultimate Allowable C hain
Plate
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
200 78.50 87.00 39.30 47.70 − 451.00 93.00 16.93
200-2 150.20 158.70 75.10 83.60 902.00 122.00 33.73
63.50 38.10 39.68 19.84 59.50 8.00
200-3 221.70 230.20 110.90 119.30 71.60 1353.00 179.00 50.53
200-4 293.30 302.40 146.70 155.70 1804.00 236.00 67.34

LEAF CHAINS
KILOWATT RATING OF
No. of
200 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 10 15 20 30 40 50 70 100 150 200 250 300 350 400 450 500 550 600
S mall Lubrication Method
S pkt. A B C D
9 6.80 9.80 12.60 18.20 23.60 28.80 39.00 53.78 77.50 100.00 123.00 137.00 109.00 89.10 74.70 63.70 55.30 48.50
10 7.60 10.90 14.20 20.40 26.40 32.30 43.70 60.26 86.80 112.00 137.00 161.00 127.00 104.00 87.40 74.70 64.70 56.80
11 8.40 12.10 15.70 22.60 29.30 35.80 48.50 66.79 96.20 125.00 152.00 180.00 147.00 120.00 101.00 86.10 74.70 65.50
12 9.20 13.30 17.20 24.80 32.20 39.30 53.20 73.37 106.00 137.00 167.00 197.00 168.00 137.00 115.00 98.10 85.10 74.70
13 10.10 14.50 18.80 27.10 35.10 42.90 58.00 80.00 115.00 149.00 182.00 215.00 189.00 155.00 130.00 111.00 95.90 84.20
ATTACHMENT

14 10.90 15.70 20.40 29.30 38.00 46.40 62.90 86.66 125.00 162.00 198.00 233.00 211.00 173.00 145.00 124.00 107.00 94.10
15 11.80 16.90 21.90 31.60 40.90 50.00 67.70 93.37 134.00 174.00 213.00 251.00 234.00 192.00 161.00 137.00 119.00 104.00
CHAINS

16 12.60 18.20 23.50 33.90 43.90 53.60 72.60 100.00 144.00 187.00 228.00 269.00 258.00 211.00 177.00 151.00 131.00 115.00
17 13.50 19.40 25.10 36.20 46.90 57.30 77.50 107.00 154.00 199.00 244.00 287.00 283.00 231.00 194.00 165.00 143.00 126.00
18 14.30 20.60 26.70 38.50 49.80 60.90 82.50 114.00 164.00 212.00 259.00 306.00 308.00 252.00 211.00 180.00 156.00 137.00
19 15.20 21.90 28.30 40.80 52.80 64.60 87.40 121.00 174.00 225.00 275.00 324.00 334.00 273.00 229.00 196.00 169.00 149.00
20 16.00 23.10 29.90 43.10 55.80 68.30 92.40 127.00 183.00 238.00 291.00 342.00 361.00 295.00 247.00 211.00 183.00 161.00
21 16.90 24.30 31.50 45.40 58.90 72.00 97.40 134.00 193.00 251.00 306.00 361.00 388.00 318.00 266.00 227.00 197.00 173.00
22 17.80 25.60 33.20 47.80 61.90 75.70 102.00 141.00 203.00 263.00 322.00 380.00 416.00 340.00 285.00 244.00 211.00 185.00
23 18.60 26.90 34.80 50.10 64.90 79.40 107.00 148.00 213.00 276.00 338.00 398.00 445.00 364.00 305.00 260.00 226.00 198.00
24 19.50 28.10 36.40 52.50 68.00 83.10 113.00 155.00 223.00 289.00 354.00 417.00 474.00 388.00 325.00 278.00 241.00 211.00
25 20.40 29.40 38.10 54.90 71.10 86.90 118.00 162.00 233.00 302.00 370.00 436.00 501.00 412.00 346.00 295.00 256.00 225.00
26 21.30 30.70 39.70 57.20 74.10 90.60 123.00 169.00 244.00 316.00 386.00 455.00 522.00 437.00 367.00 313.00 271.00 238.00
INFORMATION

A B C D
TECHNICAL

Note: Lubricated types A, B, C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

23
ROLLER CHAINS

240
T
L1 D
R W LR
LC
L2
T

T
D R W

TP T
LC LR
TP

Dimens ions - mm Average Maximum Average

C hain R oller Pin PlateTrans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
240 96.40 104.10 48.20 55.90 − 677.00 129.00 23.64
240-2 184.20 191.80 92.10 99.70 1354.00 167.00 47.13
76.20 47.63 47.63 23.80 70.30 9.50
240-3 272.00 279.60 136.00 143.60 87.80 2031.00 245.00 70.61
240-4 359.80 367.40 179.90 187.50 2708.00 324.00 94.09

KILOWATT RATING OF
No. of
240 Revolutions per Minute(RPM)-S mall S proc ket
(kw)
Teeth 5 10 15 20 25 30 40 50 60 80 100 125 150 175 200 250 300 350
S mall Lubrication Method
S pkt. A B C D
9 5.80 10.90 15.70 20.30 24.90 29.30 38.00 46.40 54.70 70.90 86.60 106.00 125.00 143.00 162.00 198.00 159.00 126.00
10 6.50 12.20 17.60 22.80 27.90 32.80 42.50 52.00 61.30 79.40 97.10 119.00 140.00 161.00 181.00 221.00 186.00 147.00
11 7.30 13.50 19.50 25.30 30.90 36.40 47.20 57.60 67.90 88.00 108.00 131.00 155.00 178.00 201.00 245.00 241.00 170.00
12 8.00 14.90 21.40 27.80 33.90 40.00 51.80 63.30 74.60 96.70 118.00 144.00 170.00 196.00 221.00 270.00 244.00 194.00
13 8.70 16.20 23.40 30.30 37.00 43.60 56.50 69.00 81.40 105.00 129.00 157.00 186.00 213.00 240.00 294.00 275.00 219.00
14 9.40 17.60 25.30 32.80 40.10 47.20 61.20 74.80 88.10 114.00 140.00 171.00 201.00 231.00 260.00 318.00 308.00 244.00
15 10.10 18.90 27.30 35.30 43.20 50.90 65.90 80.60 95.00 123.00 150.00 184.00 217.00 249.00 281.00 343.00 341.00 271.00
16 10.90 20.30 29.20 37.90 46.30 54.60 70.70 86.40 102.00 132.00 161.00 197.00 232.00 267.00 301.00 368.00 376.00 299.00
17 11.60 21.70 31.20 40.40 49.40 58.20 75.50 92.20 109.00 141.00 172.00 210.00 248.00 285.00 321.00 393.00 412.00 327.00
18 12.40 23.10 33.20 43.00 52.60 62.00 80.30 98.10 116.00 150.00 183.00 224.00 264.00 303.00 342.00 418.00 449.00 356.00
19 13.10 24.40 35.20 45.60 55.70 65.70 85.10 104.00 123.00 159.00 194.00 237.00 280.00 321.00 362.00 443.00 487.00 386.00
20 13.80 25.80 37.20 48.20 58.90 69.40 89.90 110.00 130.00 168.00 205.00 251.00 296.00 340.00 383.00 468.00 526.00 417.00
21 14.60 27.20 39.20 50.80 62.10 73.20 94.80 116.00 137.00 177.00 216.00 264.00 312.00 358.00 404.00 493.00 566.00 449.00
22 15.30 28.60 41.20 53.40 65.30 77.00 99.70 122.00 144.00 186.00 227.00 278.00 328.00 376.00 424.00 519.00 607.00 481.00
23 16.10 30.00 43.30 56.10 68.50 80.70 105.00 128.00 151.00 195.00 239.00 292.00 344.00 395.00 445.00 544.00 641.00 514.00
24 16.90 31.50 45.30 58.70 71.70 84.50 110.00 134.00 158.00 204.00 250.00 305.00 360.00 413.00 466.00 570.00 671.00 548.00
25 17.60 32.90 47.30 61.30 75.00 88.30 114.00 140.00 165.00 214.00 261.00 319.00 376.00 432.00 487.00 596.00 702.00 583.00
26 18.40 34.30 49.40 64.00 78.20 92.20 119.00 146.00 172.00 223.00 272.00 333.00 392.00 451.00 508.00 621.00 732.00 618.00
A B C D
Note: Lubricated types A, B, C and D on the table are shown on page 72.
: Whenever possible, selection should not be made from the colored sections of the table.

24
 ROLLER CHAINS
BS Standard Roller Chains

06B 08B.10B.12B.16B

ROLLER CHAINS
T1 T2 T1 T2

DOUBLE PITCH
L1 D L1 D
LC R
W LR LC R W LR
L2 L2
T2 T2

T1 T2
L1 D
R

HOLLOW PIN CHAINS

W
TP T2
LC LR
TP

L2

CORROSION RESISTANT
ROLLER CHAINS
H H

P P

LEAF CHAINS
Dimensions - mm Minimum Maximum Average
C hain R oller Pin Plate Trans. Ultimate Allowable C hain
No. Pitc h S trength Load
Width Dia. Dia. Length Height Thic kness Pitc h Weight
P W R D LR LC L1 L2 H T1 T2 TP kN kN kg/m
※06B 12.60 13.40 8.90 1.77 0.39
※ -2 9.525 5.72 6.35 3.28 22.90 23.70 6.30 7.10 8.26 1.30 1.00 10.24 16.90 2.90 0.74
※ -3 33.20 33.70 24.90 4.20 1.10
08B 16.70 18.20 17.80 3.14 0.61
ATTACHMENT

-2 12.70 7.75 8.51 4.45 30.60 31.90 8.40 9.80 11.80 1.50 13.92 31.10 5.35 1.26
CHAINS

-3 44.50 45.80 44.50 7.85 1.88

10B 19.00 20.70 22.20 4.90 0.89
-2 15.875 9.65 10.16 5.08 35.60 37.30 9.50 11.20 14.70 1.65 16.59 44.50 8.33 1.79
-3 52.40 54.40 66.70 12.20 2.66
12B 22.00 23.60 28.90 7.06 1.14
-2 19.05 11.68 12.07 5.72 41.60 43.10 11.00 12.60 16.10 1.80 19.46 57.80 12.00 2.28
INFORMATION
TECHNICAL

-3 61.10 62.70 86.70 17.60 3.36

16B 35.10 38.20 60.00 16.40 2.59
-2 25.40 17.02 15.88 8.26 67.20 70.10 17.60 20.60 21.00 3.20 4.00 31.88 106.00 21.40 5.13
-3 99.20 102.50 160.00 31.50 7.68
Note: ※Curled bushing is used

25
ROLLER CHAINS

20B.24B.28B.32B

TT1 1 T2
L
L11 D
D R
LCC W LR
W
L22
T22
T

TT1 1 T2
L1 D
R W
W
TP
TP T2
LLCC LR
TP
TP

L2

H
H

P
P

Dimensions - mm Minimum Maximum Average

C hain R oller Pin Plate Trans. Ultimate Allowable C hain
Pitc h S trength Load
No. Width D ia. Dia. Length Height Thic kness Pitc h Weight
P W R D LR LC L1 L2 H T1 T2 TP kN kN kg/m
20B 40.20 44.00 95.00 25.50 3.76
-2 31.75 19.56 19.05 10.16 76.80 80.60 20.10 23.90 26.40 3.50 4.50 36.45 170.00 33.30 7.26
-3 113.30 117.20 250.00 49.00 10.86
24B 53.40 58.10 160.00 35.70 7.29
-2 38.10 25.40 25.40 14.63 101.80 106.50 26.70 31.40 33.40 4.90 5.90 48.36 280.00 46.80 14.53
-3 150.20 154.90 425.00 68.80 21.76
28B 65.10 70.50 200.00 44.50 9.26
-2 44.45 31.00 27.94 15.88 124.70 130.00 32.60 37.90 37.00 6.30 7.40 59.56 360.00 58.30 18.45
-3 184.20 189.60 530.00 85.80 27.65
32B 65.00 71.10 250.00 51.00 9.92
-2 50.80 31.00 29.21 17.81 123.40 129.70 32.50 38.60 42.20 6.30 6.90 58.55 450.00 66.60 19.76
-3 182.00 188.30 670.00 98.00 29.61

26
Heavy Series Roller Chains (H Series)

ROLLER CHAINS
H Series Roller Chains are made
of thicker steel than the stan-
T
dard type,
L1 D R
LC W LR and the pins are made of special
L2
T
alloy steel,
making Type-H chains stronger

ROLLER CHAINS
DOUBLE PITCH
and more fatigue-resistant than
T
the standard type.
D R
W

TP T
LC LR

TP

HOLLOW PIN CHAINS

H

CORROSION RESISTANT
ROLLER CHAINS
Dimensions - mm Average Maximum Average Type LEAF CHAINS
C hain R oller Pin Plate Ultimate Allowable C hain of
Pitch S trength Load Weight
No. Width D ia. Dia. Length Height Thick. C onn
Link
P W R D LR LC L1 L2 H T kN kN kg/m
ATTACHMENT

60H 19.05 12.70 11.91 5.95 28.80 30.80 14.40 16.40 17.50 3.20 54.90 10.70 1.80
CHAINS

80H 25.40 15.88 15.88 7.93 35.70 38.70 17.90 20.80 23.40 4.00 90.20 18.40 2.81
100H 31.75 19.05 19.05 9.53 42.40 45.90 21.20 24.70 29.30 4.80 137.00 28.30 4.14
120H 38.10 25.40 22.23 11.10 52.80 57.20 26.40 30.80 35.10 5.60 186.00 38.00 5.83 C
140H 44.45 25.40 25.40 12.70 57.20 61.80 28.60 33.20 40.90 6.40 241.00 50.30 8.41
160H 50.80 31.75 28.58 14.28 67.90 73.00 34.00 39.00 46.70 7.20 306.00 66.30 10.86
180H 57.15 35.70 35.70 17.45 75.60 81.50 37.80 43.70 52.50 8.00 373.00 70.70 15.18
200H 63.50 38.10 39.67 19.83 84.80 93.40 42.40 51.00 59.80 9.50 520.00 82.30 17.85
INFORMATION

S
TECHNICAL

240H 76.20 47.63 47.63 23.78 109.80 118.20 54.90 63.30 72.40 12.70 726.00 112.80 32.29
Note: ※Standard sprockets can only be used with single Strand type
※Type of Conn Link is refered to page 10.

27
ROLLER CHAINS

HE Series

HE Series Roller Chains are man-

ufactured with thicker side
plates to insure greater capacity
for absorbing shock loads.
T These are mainly used for appli-
L1 D R H W LR cations where more stronger
LC
L2 chains are needed, though
P T space and design are limited.
T
D R W

TP T
LC LR

TP
H

Dimensions - mm Average Maximum Average

C hain R o ller Pin Plate Ultimate Allowable C hain
Pitc h
No. Width D ia. Dia. Leng th H eight Thic k. trength
S Load Weight
P W R D LR LC L1 L2 H T kN kN kg/m
80HE 25.40 15.88 15.88 7.93 35.50 38.80 17.80 21.10 23.40 4.00 93.20 18.40 2.80
100HE 31.75 19.05 19.05 9.53 42.20 45.70 21.10 24.60 29.30 4.80 142.00 28.30 4.14
120HE 38.10 25.40 22.23 11.10 52.60 57.00 26.30 30.70 35.10 5.60 191.00 38.00 5.83
140HE 44.45 25.40 25.40 12.70 57.00 61.60 28.50 33.10 40.90 6.40 252.00 50.30 8.41
160HE 50.80 31.75 28.58 14.28 67.70 72.90 33.90 39.10 46.70 7.20 319.00 66.30 10.86
180HE 57.15 35.70 35.70 17.45 75.70 81.30 37.90 43.50 52.50 8.00 441.00 70.60 15.18
200HE 63.50 38.10 39.67 19.83 84.90 93.30 42.50 50.80 59.80 9.50 559.00 82.30 17.85
Note: ※Standard sprockets can only be used with single Strand type

28
Straight Sidebar Chains

ROLLER CHAINS
T1
T2
L1 D R
LC W LR
L2
T

ROLLER CHAINS
DOUBLE PITCH
H

HOLLOW PIN CHAINS

P

ANSI
Dimensions - mm Average Maximum Average Type
C hain R oller Pin Plate Ultimate Allowable C hain of
Pitc h S trength Load Weight
No. Width D ia. Dia. Length Height Thic k. C onn

CORROSION RESISTANT
D LR LC L1 L2 H T kN kN kg/m Link
P W R

ROLLER CHAINS
35F 9.525 4.78 5.08 3.58 12.00 12.90 6.00 6.90 9.00 1.25 10.80 2.23 0.38
40F 12.70 7.95 7.92 3.96 16.50 17.70 8.30 9.40 11.70 1.50 19.10 4.17 0.67
S pc I
50F 15.875 9.53 10.16 5.08 20.40 21.90 10.20 11.70 14.60 2.00 31.90 7.22 1.10
60F 19.05 12.70 11.91 5.95 25.50 26.90 12.80 14.10 17.50 2.40 43.10 10.70 1.63
80F 25.40 15.88 15.88 7.93 32.80 35.00 16.40 18.60 23.40 3.20 78.50 18.40 2.82
100F 31.75 19.05 19.05 9.53 39.40 43.00 19.70 23.30 29.30 4.00 118.00 28.30 4.37
120F 38.10 25.40 22.23 11.10 49.50 53.40 24.80 28.60 35.10 4.80 167.00 38.00 6.45

LEAF CHAINS
140F 44.45 25.40 25.40 12.70 54.00 58.30 27.00 31.30 40.90 5.60 216.00 50.30 8.29 C
160F 50.80 31.75 28.58 14.28 64.30 68.70 32.20 36.50 46.70 6.40 275.00 66.30 10.96
200F 63.50 38.10 39.67 19.83 78.50 87.00 39.30 47.70 59.80 8.00 451.00 82.30 18.96
240F 76.20 47.63 47.63 23.78 96.40 104.10 48.20 55.90 70.30 9.50 677.00 112.80 26.47

BS
Dimensions - mm Minimum Maximum Average Type
R oller Pin Plate Ultimate Allowable C hain of
ATTACHMENT

C hain Pitch
No. Width D ia. Dia. Length Height Thickness S trength Load Weight C onn
CHAINS

Link
P W R D LR LC L1 L2 H T1 T2 kN kN kg/m
06B -F 9.525 5.72 6.35 3.28 12.60 13.40 6.30 7.10 8.20 1.00 1.25 8.92 1.77 0.48
08B -F 12.70 7.75 8.51 4.45 16.70 18.00 8.40 9.60 11.80 1.50 17.80 3.14 0.68
S pc I
10B -F 15.875 9.65 10.16 5.08 19.00 20.70 9.50 11.20 14.70 1.65 22.30 4.90 0.99
12B -F 19.05 11.68 12.07 5.72 22.00 23.60 11.00 12.60 16.10 1.80 28.90 7.06 1.27
16B -F 25.40 17.02 15.88 8.26 35.10 38.20 17.60 20.50 20.30 3.20 4.00 60.80 12.60 2.90
INFORMATION
TECHNICAL

20B -F 31.75 19.56 19.05 10.16 40.20 44.00 20.10 23.90 26.00 3.50 4.50 95.10 19.60 4.21
24B -F 38.10 25.40 25.40 14.63 53.40 58.10 26.70 31.40 33.40 4.80 5.90 161.00 27.50 8.16 C
28B -F 44.45 30.99 27.94 15.88 65.10 70.50 32.60 37.90 36.60 6.30 7.40 201.00 34.30 10.37
32B -F 50.80 30.99 29.21 17.81 65.00 71.10 32.50 38.60 41.70 6.30 6.90 250.00 39.20 11.11
※Type of Conn Link is refered to page 10.

29
ROLLER CHAINS

Super Roller Chains

Super Roller Chains are upgra-

ded to a high degree over exist-
ing ANSI standard roller chains.
Big improvement has been
made in particular with impact
T
L1
absorbing capacity.
D
LC
R
W LR Super Heavy Roller Chains provi-
L2 ded with link plates of next larg-
T
er chain size promise you
higher performance and super-
ior quality.

SINGLE STRANDS
Dimens ions - mm Average Maximum Average
C hain Ultimate Allowable C hain
R oller Pin Plate
No. Pitc h S trength Load Weight
(ANS I) Width D ia. Dia. Length Height Thic k.
P W R D LR LC L1 L2 H T kN kN kg/m
SUPER 80 25.40 15.88 15.88 7.93 32.60 35.50 16.30 19.20 24.10 3.20 84.30 18.60 2.81
SUPER 100 31.75 19.05 19.05 9.53 39.80 43.20 19.90 23.30 30.10 4.00 127.00 30.40 4.26
SUPER 120 38.10 25.40 22.23 11.10 49.70 53.70 24.90 28.80 36.20 4.80 186.00 39.20 6.30
SUPER 140 44.45 25.40 25.40 12.70 54.00 58.30 27.00 31.30 42.20 5.60 245.00 53.90 8.04
SUPER 160 50.80 31.75 28.58 14.28 64.40 69.00 32.20 36.80 48.20 6.40 314.00 70.60 10.80
SUPER 200 63.50 38.10 39.68 19.84 78.60 86.20 39.30 46.90 60.30 8.00 490.00 94.10 17.60
SUPER 240 76.20 47.63 47.63 23.80 96.40 103.40 48.20 55.20 72.40 9.50 726.00 132.00 25.60
SUPER 80H 25.40 15.88 15.88 7.93 35.90 38.90 18.00 20.90 24.10 4.00 98.10 20.60 3.33
SUPER 100H 31.75 19.05 19.05 9.53 42.60 46.20 21.30 24.90 30.10 4.80 145.00 32.40 4.88
SUPER 120H 38.10 25.40 22.23 11.10 52.80 57.30 26.90 30.40 36.20 5.60 196.00 42.20 6.94
SUPER 140H 44.45 25.40 25.40 12.70 57.20 61.90 28.60 33.30 42.20 6.40 255.00 56.90 8.87
SUPER 160H 50.80 31.75 28.58 14.28 67.90 72.80 34.00 38.80 48.20 7.10 324.00 73.50 11.70
Note: ※ 1. Offs et links are not available.
2. R iveted type c hain will be provided unles s otherwis e s pec ified.
C ottered type c hain will be provided upon reques t.
3. Pres s -fitted type c onnec ting links will be s upplied.

30
 ROLLER CHAINS
T
D R
W

TP T

LC LR

TP

ROLLER CHAINS
DOUBLE PITCH
H

MULTIPLE STRANDS

HOLLOW PIN CHAINS

Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Trans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
SUPER80-2 62.00 64.90 31.00 33.90 169.00 31.60 5.63
SUPER80-3 25.40 15.88 15.88 7.93 91.30 94.20 45.70 48.50 24.10 3.20 29.30 253.00 46.50 8.41
SUPER80-4 120.60 123.50 60.30 63.20 337.00 61.40 11.18
SUPER100-2 75.40 79.00 37.70 41.30 255.00 51.60 8.38

CORROSION RESISTANT
SUPER100-3 31.75 19.05 19.05 9.53 111.20 114.80 55.60 59.20 30.10 4.00 35.80 381.00 76.00 12.57

ROLLER CHAINS
SUPER100-4 147.00 150.60 73.50 77.10 508.00 100.00 16.77
SUPER120-2 95.40 99.40 47.70 51.70 372.00 66.60 12.44
SUPER120-3 38.10 25.40 22.23 11.10 140.80 144.80 70.40 74.40 36.20 4.80 45.40 558.00 98.00 18.65
SUPER120-4 186.20 190.20 93.10 97.10 744.00 129.00 24.85
SUPER140-2 103.30 107.60 51.70 55.90 490.00 91.60 15.92
SUPER140-3 44.45 25.40 25.40 12.70 152.20 156.50 76.10 80.40 42.20 5.60 48.90 735.00 134.00 23.84
SUPER140-4 201.10 205.40 100.60 104.80 980.00 177.00 32.10

LEAF CHAINS
SUPER160-2 123.20 127.80 61.60 66.20 628.00 120.00 21.44
SUPER160-3 50.80 31.75 28.58 14.28 181.70 186.30 90.90 95.40 48.20 6.40 58.50 942.00 176.00 32.10
SUPER160-4 240.20 244.80 120.10 124.70 1256.00 233.00 42.84
SUPER200-2 150.60 158.20 75.30 82.90 980.00 160.00 34.91
SUPER200-3 63.50 38.10 39.67 19.83 222.20 229.80 111.10 118.70 60.30 8.00 71.60 1470.00 235.00 52.44
SUPER200-4 293.80 301.40 146.90 154.50 1960.00 310.00 69.74
SUPER240-2 184.20 191.20 92.10 99.10 1452.00 224.00 50.88
ATTACHMENT

SUPER240-3 76.20 47.63 47.63 23.78 272.00 279.00 136.00 143.00 72.40 9.50 87.80 2178.00 330.00 76.12
CHAINS

SUPER240-4 359.80 366.80 179.90 186.90 2904.00 436.00 101.40

SUPER 80H-2 68.60 71.60 34.30 37.30 196.20 35.02 6.67
25.40 15.88 15.88 7.93 24.10 4.00 32.60
SUPER 80H-3 101.20 104.20 50.60 53.60 294.30 51.50 9.96
SUPER 100H-2 81.60 85.40 40.80 44.60 290.00 55.08 9.60
31.75 19.05 19.05 9.53 30.10 4.80 39.10
SUPER 100H-3 120.70 124.50 60.40 64.10 435.00 81.00 14.40
SUPER 120H-2 102.00 106.40 51.00 55.40 392.00 71.74 13.71
38.10 25.40 22.23 11.10 36.20 5.60 48.90
SUPER 120H-3 150.90 155.40 75.50 79.90 588.00 105.50 20.55
INFORMATION
TECHNICAL

SUPER 140H-2 109.60 114.20 54.80 59.40 510.00 96.73 17.56

44.45 25.40 25.40 12.70 42.20 6.40 52.20
SHPER 140H-3 161.80 166.50 80.90 85.60 765.00 142.25 26.30
SUPER 160H-2 130.00 134.80 65.00 69.80 648.00 124.95 23.15
50.80 31.75 28.58 14.28 48.20 7.10 61.90
SUPER 160H-3 192.00 196.80 96.00 100.80 972.00 183.75 34.67

31
ROLLER CHAINS

SUPER ROLLER CHAIN

KILOWATT RATING OF SUPER 80
No. of Revolutions per Minute (RPM)-S mall S proc ket
Teeth 10 25 50 100 200 300 400 500 600 700 800 900 1000
S mall Lubric ation Method
S pkt. B C D
13 0.87 1.98 3.70 6.91 12.89 18.57 24.05 29.40 34.64 32.10 26.27 22.02 18.80
14 0.94 2.15 4.01 7.48 13.96 20.11 26.06 31.85 37.53 35.87 29.36 24.60 21.01
15 1.01 2.32 4.32 8.06 15.04 21.67 28.07 34.31 40.43 39.78 32.56 27.29 23.30
16 1.09 2.48 4.63 8.64 16.13 23.23 30.10 36.79 43.35 43.82 35.87 30.06 25.67
17 1.16 2.65 4.95 9.23 17.22 24.80 32.13 39.28 46.29 48.00 39.28 32.92 28.11
18 1.24 2.82 5.26 9.82 18.32 26.38 34.18 41.78 49.23 52.29 42.80 35.87 30.63
19 1.31 2.99 5.58 10.41 19.42 27.97 36.24 44.30 52.19 56.71 46.42 38.90 33.21
20 1.38 3.16 5.89 11.00 20.52 29.56 38.30 46.82 55.17 61.25 50.13 42.01 35.87
21 1.46 3.33 6.21 11.59 21.63 31.16 40.37 49.35 58.15 65.90 53.94 45.20 38.59
22 1.53 3.50 6.53 12.19 22.75 32.77 42.45 51.89 61.15 70.25 57.83 48.47 41.38
24 1.69 3.85 7.18 13.39 24.99 36.00 46.64 57.01 67.17 77.17 65.90 55.23 47.15
26 1.84 4.19 7.82 14.60 27.25 39.25 50.85 62.15 73.24 84.14 74.30 62.27 53.17
30 2.15 4.89 9.13 17.04 31.80 45.81 59.34 72.54 85.48 98.20 92.09 77.18 65.90
32 2.30 5.25 9.79 18.27 34.10 49.11 63.63 77.78 91.65 105.29 101.46 85.03 72.60
35 2.53 5.78 10.79 20.13 37.56 54.10 70.09 85.68 100.96 115.99 116.05 97.26 83.04
40 2.93 6.68 12.46 23.25 43.39 62.50 80.97 98.98 116.62 133.98 141.79 118.83 101.46
B C D

KILOWATT RATING OF SUPER

No. of
100 Revolutions per Minute (RPM)-S mall S proc ket
Teeth 10 25 50 100 200 300 400 500 600 700 800 900 1000
S mall Lubric ation Method
S pkt. B C D
13 1.47 3.35 6.25 11.66 21.76 31.35 40.61 49.65 48.35 38.37 31.40 26.32 22.47
14 1.59 3.63 6.77 12.64 23.58 33.96 44.00 53.78 54.04 42.88 35.10 29.41 25.11
15 1.71 3.91 7.29 13.61 25.40 36.59 47.40 57.94 59.93 47.56 38.92 32.62 27.85
16 1.84 4.19 7.82 14.60 27.24 39.23 50.82 62.13 66.02 52.39 42.88 35.94 30.68
17 1.96 4.48 8.35 15.58 29.08 41.88 54.26 66.33 72.30 57.38 46.96 39.36 33.60
18 2.09 4.76 8.88 16.58 30.93 44.55 57.72 70.56 78.78 62.51 51.17 42.88 36.61
19 2.21 5.05 9.42 17.57 32.79 47.23 61.19 74.80 85.43 67.80 55.49 46.50 39.71
20 2.34 5.33 9.95 18.57 34.66 49.92 64.67 79.06 92.26 73.22 59.93 50.22 42.88
21 2.46 5.62 10.49 19.58 36.52 52.62 68.17 83.34 98.20 78.78 64.48 54.04 46.11
22 2.59 5.91 11.03 20.59 38.42 55.33 71.69 87.63 103.26 84.47 69.14 57.94 49.47
24 2.85 6.49 12.12 22.61 42.20 60.79 78.75 96.26 113.43 96.25 78.78 66.02 56.37
26 3.10 7.08 13.21 24.66 46.01 66.27 85.86 104.96 123.67 108.52 88.83 74.44 63.56
30 3.62 8.26 15.42 28.78 53.70 77.35 100.21 122.50 144.34 134.51 110.09 92.26 78.78
32 3.88 8.86 16.53 30.86 57.58 82.93 107.41 131.34 154.76 148.18 121.28 101.64 86.78
35 4.28 9.76 18.22 33.99 63.43 91.36 118.36 144.69 170.49 169.50 138.73 116.27 99.27
40 4.94 11.28 21.04 39.26 73.27 105.54 136.72 167.13 196.94 207.09 169.50 142.05 121.28
B C D

KILOWATT RATING OF SUPER

No. of
120 Revolutions per Minute (RPM)-S mall S proc ket
Teeth 10 25 50 100 200 300 400 500 600 700 800 900 1000
S mall Lubric ation Method
S pkt. B C D
13 2.27 5.18 9.67 18.05 33.68 48.51 62.84 73.54 55.94 44.39 36.34 30.45 26.00
14 2.46 5.61 10.48 19.55 36.48 52.55 68.08 82.19 62.52 49.61 40.61 34.03 29.06
15 2.65 6.05 11.29 21.06 39.30 56.61 73.34 89.65 69.34 55.02 45.04 37.74 32.23
16 2.84 6.49 12.10 22.58 42.14 60.70 78.64 96.13 76.39 60.62 49.61 41.58 35.50
17 3.04 6.92 12.92 24.11 44.99 64.81 83.96 102.63 83.66 66.39 54.34 45.54 38.88
18 3.23 7.36 13.74 25.65 47.86 68.93 89.30 109.17 91.15 72.33 59.20 49.61 42.36
19 3.42 7.81 14.57 27.19 50.73 73.08 94.67 115.73 98.85 78.44 64.20 53.81 45.94
20 3.62 8.25 15.40 28.74 53.62 77.24 100.07 122.32 106.75 84.71 69.34 58.11 49.61
21 3.81 8.70 16.23 30.29 56.53 81.42 105.48 128.94 114.86 91.15 74.60 62.52 53.38
22 4.01 9.15 17.07 31.85 59.44 85.61 110.92 135.58 123.16 97.73 79.99 67.04 57.24
24 4.41 10.05 18.75 34.99 65.29 94.05 121.84 148.94 140.33 111.36 91.15 76.39 65.22
26 4.80 10.96 20.44 38.15 71.19 102.54 132.85 162.39 158.23 125.57 102.77 86.13 73.54
30 5.61 12.79 23.86 44.53 83.09 119.68 155.05 189.53 196.12 155.63 127.38 106.75 91.15
32 6.01 13.71 25.58 47.74 89.09 128.32 166.24 203.22 216.05 171.45 140.33 117.60 100.41
35 6.62 15.10 28.18 52.59 98.14 141.36 183.13 223.87 247.14 196.12 160.52 134.52 114.86
40 7.65 17.45 32.56 60.75 113.36 163.29 211.54 258.59 301.94 239.61 196.12 164.36 140.33
B C D

KILOWATT RATING OF SUPER

No. of
140 Revolutions per Minute (RPM)-S mall S proc ket
Teeth 10 25 50 100 200 300 400 500 600 700 800 900 1000
S mall Lubric ation Method
S pkt. B C D
13 3.30 7.52 14.03 26.18 48.86 70.37 91.17 83.19 63.29 50.22 41.11 34.45 29.41
14 3.57 8.14 15.20 28.36 52.93 76.23 98.76 92.97 70.73 56.13 45.94 38.50 32.87
15 3.85 8.78 16.37 30.56 57.02 82.13 106.40 103.11 78.44 62.25 50.95 42.70 36.45
16 4.12 9.41 17.56 32.76 61.14 88.06 114.09 113.59 86.41 68.57 56.13 47.04 40.16
17 4.40 10.05 18.74 34.98 65.27 94.02 121.80 124.40 94.64 75.10 61.47 51.51 43.98
18 4.68 10.68 19.94 37.21 69.43 100.01 129.56 135.54 103.11 81.82 66.97 56.13 47.92
19 4.97 11.33 21.14 39.44 73.60 106.02 137.35 146.99 111.82 88.74 72.63 60.87 51.97
20 5.25 11.97 22.34 41.69 77.80 112.06 145.18 158.75 120.76 95.83 78.44 65.74 56.13
21 5.53 12.62 23.55 43.95 82.01 118.12 153.03 170.80 129.93 103.11 84.39 70.73 60.39
22 5.82 13.27 24.76 46.21 86.23 124.21 160.91 183.15 139.32 110.56 90.49 75.84 64.75
24 6.39 14.58 27.20 50.76 94.73 136.45 176.77 208.68 158.75 125.98 103.11 86.41 73.78
26 6.97 15.89 29.66 55.35 103.28 148.77 192.73 235.30 179.00 142.05 116.26 97.43 83.19
30 8.13 18.55 34.62 64.60 120.54 173.63 224.94 274.97 221.86 176.06 144.10 120.76 103.11
32 8.72 19.89 37.12 69.26 129.25 186.16 241.18 294.82 244.41 193.95 158.75 133.04 113.59
35 9.61 21.91 40.89 76.30 142.38 205.08 265.69 324.78 279.57 221.86 181.59 152.18 129.93
40 11.10 25.31 47.23 88.14 164.47 236.90 306.91 375.17 341.57 271.06 221.86 185.93 158.75
C D

32
KILOWATT RATING OF SUPER 160

ROLLER CHAINS
No. of Revolutions per Minute (RPM)-S mall S proc ket
Teeth 10 25 50 100 200 300 400 500 600 700 800 900 1000
S mall Lubric ation Method
S pkt. B C D
13 4.58 10.44 19.48 36.34 67.82 97.69 126.56 92.57 70.42 55.88 45.74 38.33 32.73
14 4.96 11.31 21.10 39.37 73.47 105.83 137.11 103.45 78.70 62.45 51.12 42.84 36.58
15 5.34 12.18 22.73 42.42 79.16 114.02 147.71 114.73 87.28 69.26 56.69 47.51 40.56
16 5.73 13.06 24.37 45.48 84.87 122.25 158.37 126.40 96.15 76.30 62.45 52.34 44.69
17 6.11 13.94 26.02 48.56 90.61 130.52 169.09 138.43 105.31 83.57 68.40 57.32 48.94
18 6.50 14.83 27.68 51.65 96.38 138.83 179.86 150.82 114.73 91.05 74.52 62.45 53.32
19 6.89 15.72 29.34 54.76 102.18 147.18 190.67 163.56 124.43 98.74 80.82 67.73 57.83
20 7.29 16.62 31.01 57.88 108.00 155.56 201.53 176.65 134.38 106.64 87.28 73.15 62.45
21 7.68 17.52 32.69 61.01 113.84 163.98 212.44 190.06 144.58 114.73 93.91 78.70 67.20
22 8.08 18.42 34.38 64.15 119.71 172.43 223.38 203.79 155.03 123.03 100.70 84.39 72.05

ROLLER CHAINS
24 8.87 20.24 37.76 70.47 131.50 189.42 245.39 232.21 176.65 140.18 114.73 96.15 82.10

DOUBLE PITCH
26 9.67 22.06 41.17 76.83 143.38 206.52 267.55 261.83 199.18 158.06 129.37 108.42 92.57
30 11.29 25.75 48.06 89.68 167.34 241.04 312.27 324.52 246.87 195.91 160.35 134.38 114.73
32 12.10 27.61 51.52 96.15 179.42 258.44 334.81 357.50 271.96 215.82 176.65 148.04 126.40
35 13.33 30.42 56.76 105.92 197.65 284.70 368.83 408.94 311.09 246.87 202.06 169.34 144.58
40 15.40 35.14 65.57 122.35 228.31 328.86 426.05 499.63 380.08 301.62 246.87 206.89 0.00
C D

KILOWATT RATING OF SUPER

No. of
200 Revolutions per Minute (RPM)-S mall S proc ket
Teeth 5 10 20 30 40 50 60 80 100 150 200

HOLLOW PIN CHAINS

S mall Lubric ation Method
S pkt. B C D
13 5.22 9.73 18.16 26.16 33.89 41.43 48.81 63.24 77.30 111.35 144.26
14 5.65 10.54 19.67 28.34 36.71 44.88 52.88 68.51 83.75 120.63 156.28
15 6.09 11.36 21.20 30.53 39.55 48.35 56.97 73.81 90.23 129.96 168.37
16 6.53 12.18 22.73 32.73 42.41 51.84 61.08 79.14 96.74 139.34 180.52
17 6.97 13.00 24.26 34.95 45.28 55.35 65.22 84.49 103.28 148.77 192.73
18 7.41 13.83 25.81 37.18 48.16 58.87 69.37 89.87 109.86 158.24 205.01
19 7.86 14.66 27.36 39.41 51.06 62.41 73.54 95.28 116.47 167.76 217.33
20 8.30 15.50 28.92 41.66 53.97 65.97 77.73 100.70 123.10 177.31 229.71
21 8.75 16.34 30.48 43.91 56.89 69.54 81.94 106.15 129.76 186.91 242.14
22 9.21 17.18 32.05 46.17 59.82 73.12 86.16 111.62 136.45 196.54 254.62
24 10.11 18.87 35.21 50.72 65.71 80.32 94.65 122.62 149.89 215.90 279.71
26 11.03 20.57 38.39 55.30 71.64 87.58 103.19 133.69 163.43 235.40 304.96

CORROSION RESISTANT
30 12.87 24.01 44.81 64.54 83.62 102.21 120.44 156.03 190.74 274.74 355.93
32 13.80 25.75 48.04 69.20 89.65 109.59 129.14 167.30 204.51 294.57 381.63

ROLLER CHAINS
35 15.20 28.36 52.93 76.23 98.76 120.73 142.26 184.30 225.29 324.51 420.41
40 17.56 32.76 61.14 88.06 114.08 139.46 164.33 212.89 260.24 374.85 485.62
B C D

KILOWATT RATING OF SUPER

No. of
240 Revolutions per Minute (RPM)-S mall S proc ket
Teeth 5 10 15 20 25 30 40 50 60 80 100 125 150
S mall Lubric ation Method
S pkt. B C D
13 8.03 14.99 21.59 27.97 34.19 40.28 52.19 63.79 75.17 97.38 119.04 145.52 171.47
14 8.70 16.24 23.38 30.30 37.03 43.64 56.53 69.11 81.43 105.50 128.96 157.64 185.75
15 9.37 17.49 25.19 32.64 39.90 47.01 60.91 74.45 87.73 113.66 138.94 169.84 200.12
16 10.05 18.75 27.01 35.00 42.78 50.41 65.30 79.83 94.06 121.86 148.97 182.10 214.57

LEAF CHAINS
17 10.73 20.02 28.84 37.36 45.67 53.82 69.72 85.23 100.43 130.11 159.04 194.42 229.09
18 11.41 21.30 30.68 39.74 48.58 57.25 74.16 90.66 106.82 138.39 169.17 206.80 243.68
19 12.10 22.58 32.52 42.13 51.50 60.69 78.62 96.11 113.25 146.71 179.34 219.23 258.33
20 12.79 23.86 34.37 44.53 54.44 64.14 83.10 101.58 119.70 155.07 189.56 231.72 273.04
21 13.48 25.16 36.23 46.94 57.38 67.61 87.60 107.08 126.17 163.46 199.82 244.26 287.82
22 14.18 26.45 38.10 49.36 60.34 71.10 92.11 112.60 132.67 171.88 210.11 256.84 302.64
24 15.57 29.06 41.85 54.22 66.28 78.10 101.19 123.69 145.75 188.82 230.81 282.15 332.46
26 16.98 31.68 45.63 59.12 72.27 85.16 110.32 134.86 158.91 205.87 251.66 307.63 362.48
30 19.82 36.98 53.26 69.00 84.35 99.39 128.76 157.40 185.46 240.27 293.71 359.04 423.07
32 21.25 39.65 57.11 73.98 90.44 106.56 138.05 168.76 198.85 257.62 314.92 384.96 453.61
35 23.40 43.67 62.91 81.50 99.63 117.39 152.08 185.91 219.06 283.80 346.92 424.08 499.70
40 27.04 50.45 72.67 94.14 115.08 135.60 175.68 214.75 253.04 327.82 400.74 489.87 577.22
C D
ATTACHMENT

Note: Lubricated types A, B, C and D on the table are shown on page 72.
CHAINS

: Whenever possible, selection should not be made from the colored sections of the table.
INFORMATION
TECHNICAL

33
ROLLER CHAINS

Double Capacity Chains

Double Capacity chain consists of twice the number of side plates as single strand chain,
therefore its working load is close to standard double strand chain.
Double Capacity chain operate on standard single strand sprocket.
Multiple strand Double Capacity chains are not available.
Chain speed should be less than 50 m /min.

D C（×2 ） T C（×3 ）

D
R
W

LC2 TP1 LR2

D R
LC1 W LR1

P
F C（×4 ）

D
R

LR2=LR1+TP1 LC3 TP2 LR3

LC2=LC1+TP1
LR3=LR1+TP2
LC3=LC1+TP2

ANSI
Dimens ions - mm Average Maximum
C hain R oller Pin Trans vers e Ultimate Allowable
Pitc h S trength
No. Width Dia. Dia. Length Pitc h kN Load kN
P W R D LR1 LC 1 TP 1 TP 2 DC TC FC DC
80 DC・TC・FC 25.40 15.88 15.88 7.93 45.60 48.70 29.30 42.10 149 223 298 22.40
100 DC・TC・FC 31.75 19.05 19.05 9.53 55.80 59.50 35.80 51.80 224 336 448 33.50
120 DC・TC・FC 38.10 25.40 22.23 11.10 69.00 73.30 45.40 64.20 317 475 634 49.00
140 DC・TC・FC 44.45 25.40 25.40 12.70 76.40 81.10 48.90 71.30 410 615 820 64.40
160 DC・TC・FC 50.80 31.75 28.58 14.28 90.00 95.10 58.50 84.10 522 783 1044 79.80
180 DC・TC・FC 57.15 35.70 35.70 17.45 101.60 107.70 65.80 94.60 670 1005 1340 103.00
200 DC・TC・FC 63.50 38.10 39.67 19.83 111.20 120.00 71.60 103.60 857 1285 1714 133.00
240 DC・TC・FC 76.20 47.63 47.63 23.78 135.60 143.20 87.80 125.80 1286 1929 2572 193.00

34
BS
Dimens ions - mm

ROLLER CHAINS
Average Maximum
C hain R oller Pin Trans vers e Ultimate Allowable
Pitc h S trength
No. Width Dia. Dia. Length Pitc h kN Load kN
P W R D LR1 LC 1 TP 1 TP 2 DC TC FC DC
16BDC・TC・FC 25.40 17.02 15.88 8.26 50.00 53.20 31.90 44.70 130 195 260 19.50
20BDC・TC・FC 31.75 19.56 19.05 10.16 56.00 60.40 36.50 50.50 201 301 402 30.20
24BDC・TC・FC 38.10 25.40 25.40 14.63 75.40 80.50 48.40 68.00 340 510 680 51.20
28BDC・TC・FC 44.45 31.00 27.94 15.88 93.00 98.80 59.60 84.80 424 636 848 63.80

ROLLER CHAINS
DOUBLE PITCH
32BDC・TC・FC 50.80 31.00 29.21 17.81 92.40 98.50 58.60 83.80 520 780 1040 78.40

Double Capacity Double Pitch Chains

HOLLOW PIN CHAINS

T
L1
D R
LC W LR

L2
T

CORROSION RESISTANT
ROLLER CHAINS
P

DOUBLE PITCH
Dimensions - mm Average Maximum Average
Roller Pin Plate

LEAF CHAINS
Chain Ultimate Allowable C hain
Pitch
No. Width Dia. Dia. Length Height Thickness Strength Load Weight
P W R D LR LC L1 L2 H T kN kN kg/m
C2040 DC 25.40 7.95 7.92 3.96 23.00 24.70 11.50 13.20 11.40 1.50 38.20 4.02 0.50
C2050 DC 31.75 9.53 10.16 5.08 28.80 30.50 14.40 16.10 15.00 2.00 63.80 6.72 0.85
C2060H DC 38.10 12.70 11.91 5.95 42.20 44.20 21.10 23.10 17.00 3.20 109.80 11.56 1.46
C2080H DC 50.80 15.88 15.88 7.93 52.00 55.10 26.00 29.10 22.60 4.00 180.40 18.99 2.50
C2100H DC 63.50 19.05 19.05 9.53 62.00 65.60 31.00 34.60 28.60 4.80 274.00 28.84 3.81
ATTACHMENT

C2120H DC 76.20 25.40 22.23 11.10 77.80 82.10 38.90 43.20 34.90 5.60 372.00 39.16 5.50
CHAINS

C2160H DC 101.60 31.75 28.58 14.28 97.40 102.60 48.70 53.90 47.60 7.20 612.00 64.42 9.27
INFORMATION
TECHNICAL

35
ROLLER CHAINS

Freedom Series Self-Lubricating Chains

Freedom Series Self-Lubricating Chains perform well in the application without additional
lubrication.
Oil impregnated sintered steel bushing provides self-lubricating and it is ideal for the industries
that cleanliness is critical such as packaging, printing, food processing, textile and so on.
Moreover it is designed for applications where regular maintanance is not easily accessible.

Fundamental Structure
Link Plate
Rust preventional special coating

Pin
Special surface treatment

Connecting Link Bushing

Specially processed straight Oil impregnated sintered steel bushing
side bar connecting link plates

Wear Resistance
Performance in ambient temperature

0 .3
Elongation of chain
length【%】

Standard Roller Chain without lubrication

Freedom Series Self-Lubricating Chain

RUNNING TIME

Caution and Selection

1) In dusty environments, dusts absorb the lubrication of sintered steel bushings and it causes
premature wear.
2) Used in water, the chain wears quickly.
3) Range of speed is from slow speed 25m/min to high speed 75m/min.
4) When lubrication depletes in the sintered steel bushings, the chain wears abruptly.
5) Operating temperature is from -10℃ to 150℃.
When ambient temperature is over 80℃, lubrication seeps out quickly.
6) The sintered bushings are heat treated, and allow standard chain selection.
7) An application of sintered steel bushing associated with shock load is not appropriate.

36
 ROLLER CHAINS
Freedom Series ANSI Self-Lubricating Chains

ROLLER CHAINS
DOUBLE PITCH
HOLLOW PIN CHAINS
CORROSION RESISTANT
ROLLER CHAINS
TS type (for Drive)
Dimensions - mm Average Maximum Average
Chain Roller Pin Plate Trans. Ultimate Allowable C hain
Pitch
No. Width Dia. Dia. Length Height Thickness Pitch Strength Load Weight
P W R D LR LC L1 L2 H T1 T2 TP kN kN kg/m
40FS-TS 12.70 7.95 7.92 3.96 17.50 19.60 8.80 10.80 11.70 1.50 2.00 15.60 19.10 3.63 0.70

LEAF CHAINS
50FS-TS 15.875 9.53 10.16 5.08 21.30 23.30 10.70 12.60 14.60 2.00 2.40 19.20 31.90 6.28 1.10
60FS-TS 19.05 12.70 11.91 5.95 27.40 29.80 13.70 16.10 17.50 2.40 3.20 24.90 43.10 8.63 1.70
80FS-TS 25.40 15.88 15.88 7.93 34.10 37.40 17.10 20.30 23.40 3.20 4.00 31.10 78.50 14.70 2.70
100FS-TS 31.75 19.05 19.05 9.53 41.00 44.80 20.50 24.30 29.30 4.00 4.80 37.60 118.00 22.60 4.30
*Standard sprocket is available for single strand.
ATTACHMENT

CS type (for Conveyor)

CHAINS

Dimensions - mm Average Maximum Average

Chain Roller Pin Plate Trans. Ultimate Allowable C hain
Pitch Strength Load
No. Width Dia. Dia. Length Height Thickness Pitch Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
40FS-CS 12.70 7.95 7.92 3.96 16.50 18.60 8.30 10.30 11.70 1.50 14.40 15.70 3.62 0.60
50FS-CS 15.875 9.53 10.16 5.08 20.50 22.50 10.30 12.20 14.60 2.00 18.10 25.50 6.27 1.00
INFORMATION

60FS-CS 19.05 12.70 11.91 5.95 25.90 28.30 13.70 14.60 17.50 2.40 22.80 37.30 8.63 1.50
TECHNICAL

80FS-CS 25.40 15.88 15.88 7.93 33.00 35.90 16.50 19.40 23.40 3.20 29.30 63.70 14.70 2.50
100FS-CS 31.75 19.05 19.05 9.53 39.80 43.10 19.90 23.20 29.30 4.00 35.80 100.00 22.50 3.90
*Standard sprocket is available for multiple strands.
*Attachment can be installed

37
ROLLER CHAINS

Freedom Series BS Self-Lubricating Chains

T1
T2
L1 D
R W LR
LC
L2
T2
T1

Dimensions - mm Average Maximum Average

Chain Roller Pin Plate Ultimate Allowable Chain
Pitch Strength Load Weight
No. Width Dia. Dia. Length Height Thickness
P W R D LR LC L1 L2 H T1 T2 kN kN kg/m
08B-FS 12.70 7.75 8.51 4.45 16.70 18.60 8.40 10.20 11.80 1.50 1.50 16.80 2.90 0.60
10B-FS 15.875 9.65 10.16 5.08 19.40 21.00 9.70 11.30 14.50 1.65 1.65 24.60 4.40 0.90
12B-FS 19.05 11.68 12.07 5.72 22.00 24.40 11.00 13.40 17.40 1.80 1.80 32.40 6.30 1.10
16B-FS 25.40 17.02 15.87 8.26 35.10 38.20 17.60 20.60 21.00 3.10 3.90 74.60 12.20 2.60
20B-FS 31.75 19.56 19.05 10.16 40.20 44.00 20.10 23.90 29.30 3.50 4.70 128.30 19.10 3.80
24B-FS 38.10 25.40 25.40 14.63 53.40 58.10 26.70 31.40 35.10 4.70 5.90 195.60 25.50 7.30
28B-FS 44.45 31.00 27.94 15.88 65.10 70.50 32.60 37.90 37.00 6.30 7.40 215.70 34.80 9.30
32B-FS 50.80 31.00 29.21 15.88 64.20 69.60 32.10 37.50 42.20 6.30 6.90 274.60 44.10 9.90
*Standard sprocket is available.
*Attachment can be installed.

38
Freedom Series Double Pitch Self-Lubricating Chains

ROLLER CHAINS
T
L1 D
R LR W
LC
L2
T

ROLLER CHAINS
DOUBLE PITCH
P

T
L1 D
R LR W
LC
L2
T

HOLLOW PIN CHAINS

H

Small Roller

CORROSION RESISTANT
Dimens ions - mm Average Maximum Average

ROLLER CHAINS
C hain R oller Pin Plate Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. trength
S Load Weight
P W R D LR LC L1 L2 H T kN kN kg/m
C2040-FS 25.40 7.95 7.92 3.96 16.50 18.50 8.30 10.20 11.50 1.50 15.70 2.65 0.50
C2050-FS 31.75 9.53 10.16 5.08 20.50 22.50 10.30 12.20 15.10 2.00 25.50 4.31 0.80
C2060H-FS 38.10 12.70 11.91 5.95 29.10 31.50 14.60 16.90 17.20 3.20 37.30 6.28 1.40
C2080H-FS 50.80 15.88 15.88 7.93 35.80 39.00 17.90 21.10 22.80 4.00 63.70 10.70 2.40
*Standard sprocket is available.

LEAF CHAINS
*Attachment can be installed.

Large Roller
Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. trength
S Load Weight
P W R D LR LC L1 L2 H T kN kN kg/m
ATTACHMENT
CHAINS

C2042-FS 25.40 7.95 15.88 3.96 16.50 18.50 8.30 10.20 11.50 1.50 15.70 2.65 1.00
C2052-FS 31.75 9.53 19.05 5.08 20.50 22.50 10.30 12.20 15.10 2.00 25.50 4.31 1.60
C2062H-FS 38.10 12.70 22.23 5.95 29.10 31.50 14.60 16.90 17.20 3.20 37.30 6.28 2.80
C2082H-FS 50.80 15.88 28.58 7.93 35.80 39.00 17.90 21.10 22.80 4.00 63.70 10.70 4.60
*Standard sprocket is available.
*Attachment can be installed.
INFORMATION
TECHNICAL

39
ROLLER CHAINS

Lubeless Chains (O-ring Chain)

Loss of oil coverage between pins and bushes is one factor controlling the lifespan of a chain. O-
ring chains are equipped with O-rings to prevent this loss of oil coverage. Therefore, these chains
are suitable for use in situations where it is difficult or impossible to oil the chain, in environments
where oiling (lubricant oil) is not tolerated, or in very dusty environments.

T
L2 L2 L2 L2 L2
R W D D D
L1 L1 L1 L1 L1

P Clip-type Split pin-type Screw-type

Dimensions - mm Minimum Maximum

C hain R oller Pin Plate Ultimate Allowable Weight
Pitch S trength Load
No. Width D ia. Dia. Length Height Thickness
P W R D L1 L2 H T kN kgf kN kgf kg/m
40BO 12.70 7.94 7.94 3.96 9.70 9.70 12.00 1.50 18.10 1850 3.33 340 0.67
50BO 15.875 9.50 10.16 5.08 11.45 11.45 15.00 2.00 31.40 3200 5.88 600 1.11
60BO 19.05 12.70 11.91 5.95 14.30 14.30 17.80 2.40 44.60 4550 8.23 840 1.60
80BO 25.40 15.88 15.88 7.93 18.70 18.70 23.00 3.20 70.60 7200 13.70 1400 2.72
100BO 31.75 19.05 19.05 9.53 22.10 22.10 29.70 4.00 116.00 11800 20.50 2100 4.27
120BO 38.10 25.40 22.23 11.10 31.50 28.30 35.30 4.80 157.00 16000 28.40 2900 6.18
140BO 44.45 25.40 25.40 12.70 34.70 30.75 42.20 5.60 204.00 20800 37.20 3800 7.97
160BO 50.80 31.75 28.58 14.28 41.00 36.65 48.20 6.40 258.00 26300 49.00 5000 10.32
180BO 57.15 35.72 35.71 17.46 46.00 41.05 54.20 7.20 332.00 33900 56.80 5800 13.99
200BO 63.50 38.10 39.69 19.84 50.30 44.80 60.30 8.00 425.00 43300 66.60 6800 17.93
240BO 76.20 47.63 47.63 23.81 61.30 54.85 72.40 9.60 629.00 64170 92.10 9400 25.48
C2040BO 25.40 7.94 7.94 3.96 11.45 9.70 12.00 1.50 16.70 1700 3.33 340 0.51
C2050BO 31.75 9.53 10.16 5.08 13.60 11.45 15.00 2.00 27.50 2800 5.88 600 0.84
C2060BO 38.10 12.70 11.91 5.95 18.65 15.55 17.00 3.20 44.60 4550 8.23 840 1.43
C2080BO 50.80 15.88 15.88 7.94 19.35 19.35 23.00 4.00 70.60 7200 13.70 1400 2.44
Note: ※ 1. Offset links are not available.
2. Clip-type connecting links are supplied for 40BO-80BO, Split pin-type for 100BO and
 C2040BO-C2080BO and Screw-type for 120BO-240BO.

Caution
O-ring chains have lubricant oil seal between pin and bush. Caution must be taken not to spill the sealed oil when
assembling or disassembling chain. The chain is worn out rapidly in case that the oil leaks out.

40
Heavy Duty Drive Chains

ROLLER CHAINS
These chains are suitable for
p o w e r t r a n s m i s s i o n i n m a-
chines which are subjected to
T T extremely large forces and
L1
D shocks, such as civil engineer-
R
W ing, construction and oil drilling

ROLLER CHAINS
DOUBLE PITCH
equipment. Heat-treated spe-
L2
T T
cial steel is used for their main
components, and they are ma-
chined to high precision. These
are offset-type chains, which
give them superior impact re-
sistance.

HOLLOW PIN CHAINS

H

CORROSION RESISTANT
ROLLER CHAINS
Dimensions (mm) Average
Chain Roller Pin Plate Ultimate Weight
Pitch Strength
No. Width Dia. Dia. Length Height Thickness
P W R D L1 L2 H T kN kgf kg/m
H2570H 63.50 38.10 31.75 15.88 44.80 50.30 41.30 9.50 333 34000 13.90
H3011 77.90 39.70 41.28 19.05 45.60 54.30 57.20 9.50 490 50000 19.80

LEAF CHAINS
HP3H 78.11 38.10 31.75 15.88 44.80 50.30 41.30 9.50 333 34000 12.20
H3125 79.38 41.30 41.28 20.32 46.40 55.10 57.20 9.50 510 52000 19.90
H238 88.90 38.10 44.45 22.20 51.30 59.80 57.20 12.70 623 63500 24.40
H1242 103.20 49.20 44.45 22.23 56.80 65.40 57.20 12.70 623 63500 23.80
HP4H 103.20 49.00 44.45 23.23 63.30 73.70 58.70 15.90 755 77000 28.90
H1245 103.45 49.20 45.24 23.83 60.00 69.00 60.30 14.30 755 77000 27.60
H635 114.30 52.40 57.15 27.80 61.60 73.40 76.20 14.30 981 100000 37.60
H1602A 127.00 69.80 63.50 31.75 73.50 84.70 88.90 15.90 1245 127000 50.80
ATTACHMENT

H6042 152.40 76.30 76.20 38.10 85.80 93.80 101.60 19.00 1863 190000 67.40
CHAINS

It is stocks class

H10199 101.60 58.70 57.15 28.58 61.50 72.50 76.20 12.70 978 99700 37.70
H10398 103.89 49.20 47.63 25.40 60.00 70.00 76.20 14.30 961 98000 34.70
H127170 127.00 69.90 63.50 34.90 84.30 89.80 91.00 19.00 1765 180000 60.10
It is extra workmanship (It takes the appointed date of delivery)
INFORMATION
TECHNICAL

41
DOUBLE PITCH ROLLER CHAINS

Double Pitch Roller Chains

(For Drive)
Double Pitch Roller Chains for power transmission have gourd-shaped link plates.
Applications are mainly light loads with relatively long sprocket center distances.

T
L1 D R
LC LR W
L2
T

Dimens ions - mm Average Maximum Average

C hain R oller Pin Plate Ultimate Allowable C hain
Pitc h S trength Load Weight
No. Width Dia. Dia. Length Height Thic k.
P W R D LR LC L1 L2 H T kN kN kg/m
A 2040 25.40 7.95 7.92 3.96 16.50 17.90 9.30 9.60 11.40 1.50 16.90 3.63 0.43
A 2050 31.75 9.53 10.16 5.08 20.40 22.00 10.20 11.80 15.00 2.00 27.50 6.28 0.73
A 2060 38.10 12.70 11.91 5.95 25.50 26.90 12.80 14.10 17.00 2.40 40.20 8.60 1.03
A 2080 50.80 15.88 15.88 7.93 32.80 35.20 16.40 18.80 22.60 3.20 68.60 14.70 1.71

42
Double Pitch Roller Chains

ROLLER CHAINS
(For Conveyor)

T
L1 D
LC R LR W
L2
T

ROLLER CHAINS
DOUBLE PITCH
H

T
L1 D
LC R LR W
L2

HOLLOW PIN CHAINS

T

CORROSION RESISTANT
Small Roller

ROLLER CHAINS
Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Ultimate Allowable C hain
Pitc h S trength Load Weight
No. Width Dia. Dia. Length Height Thic k.
P W R D LR LC L1 L2 H T kN kN kg/m
C2040 25.40 7.95 7.92 3.96 16.50 18.50 8.20 10.30 11.40 1.50 16.90 3.63 0.48
C2050 31.75 9.53 10.16 5.08 20.40 22.00 10.20 11.80 15.00 2.00 27.50 6.28 0.82
C2060H 38.10 12.70 11.91 5.95 28.70 31.00 14.40 16.60 17.00 3.20 40.20 8.63 1.38
C2080H 50.80 15.88 15.88 7.93 35.50 38.80 17.80 21.00 22.60 4.00 68.60 14.70 2.32

LEAF CHAINS
C2100H 63.50 19.05 19.05 9.53 42.20 45.70 21.10 24.60 28.60 4.80 107.90 22.60 3.46
C2120H 76.20 25.40 22.23 11.10 52.60 57.00 26.30 30.70 34.90 5.60 151.00 30.40 4.92
C2160H 101.60 31.75 28.58 14.28 67.70 72.90 33.90 39.00 47.60 7.20 257.90 53.00 8.02

Large Roller
Dimens ions - mm Average Maximum Average
ATTACHMENT

C hain R oller Pin Plate Ultimate Allowable C hain

CHAINS

Pitc h S trength Load Weight

No. Width Dia. Dia. Length Height Thic k.
P W R D LR LC L1 L2 H T kN kN kg/m
C2042 25.40 7.95 15.88 3.96 16.50 18.50 8.20 10.30 11.40 1.50 16.90 3.63 0.82
C2052 31.75 9.53 19.05 5.08 20.40 22.00 10.20 11.80 15.00 2.00 27.50 6.28 1.26
C2062H 38.10 12.70 22.23 5.95 28.70 31.00 14.40 16.60 17.00 3.20 40.20 8.63 2.08
C2082H 50.80 15.88 28.58 7.93 35.50 38.80 17.80 21.00 22.60 4.00 68.60 14.70 3.36
INFORMATION

C2102H 63.50 19.05 39.67 9.53 42.20 45.70 21.10 24.60 28.60 4.80 107.90 22.60 5.64
TECHNICAL

C2122H 76.20 25.40 44.45 11.10 52.60 57.00 26.30 30.70 34.90 5.60 151.00 30.40 7.87
C2162H 101.60 31.75 57.15 14.28 67.70 72.90 33.90 39.00 47.60 7.20 257.90 53.00 12.77

43
HOLLOW PIN CHAINS

Hollow Pin Chains

These Chains have "Hollow
Pin", various pins and the at-
L1
T
tachments can be instolled by
D R
LC LR W using it.
L2
T

P d

HP STANDARD
Dimens ions - mm Average Maximum
C hain Bushing Hollows Pin Plate Ultimate Allowable Weight
Pitc h S trength Load
No. Width Dia. Outside Inside Length Height Thic k.
P W R D d LR LC L1 L2 H T kN kN kg/m
40HP 12.70 7.95 7.92 5.63 4.03 16.70 17.60 8.40 9.20 12.00 1.50 12.70 1.77 0.58
50HP 15.875 9.53 10.16 7.09 5.13 20.10 21.30 10.10 11.20 15.00 2.00 19.60 3.14 0.97
60HP 19.05 12.70 11.91 8.29 6.04 26.00 27.20 13.00 14.20 18.10 2.40 28.40 4.22 1.46
80HP 25.40 15.88 15.88 11.34 8.08 32.40 34.30 16.20 18.10 24.10 3.20 51.00 7.70 2.47

Double Pitch Hollow Pin Chains

T
L1
D R
LC LR W
L2
T

P d

HP DOUBLE PITCH
Dimens ions - mm Average Maximum
C hain R oller Hollows Pin Plate Ultimate Allowable Weight
Pitc h S trength Load
No. Width Dia. Outside Inside Length Height Thic k.
P W R D d LR LC L1 L2 H T kN kN kg/m
C2040HP 25.40 7.95 7.92 5.63 4.03 16.70 17.60 8.40 9.20 12.00 1.50 12.70 1.77 0.46
C2050HP 31.75 9.53 10.16 7.09 5.13 20.10 21.30 10.10 11.20 15.00 2.00 19.60 3.14 0.76
C2060HP 38.10 12.70 11.91 8.29 6.04 26.00 27.20 13.00 14.20 18.10 2.40 28.40 4.22 1.12
C2080HP 50.80 15.88 15.88 11.34 8.08 32.40 34.30 16.20 18.10 24.10 3.20 51.00 7.70 1.98
C2042HP 25.40 7.95 15.88 5.63 4.03 16.70 17.60 8.40 9.20 12.00 1.50 12.70 1.77 0.81
C2052HP 31.75 9.53 19.05 7.09 5.13 20.10 21.30 10.10 11.20 15.00 2.00 19.60 3.14 1.25
C2062HP 38.10 12.70 22.23 8.29 6.04 26.00 27.20 13.00 14.20 18.10 2.40 28.40 4.22 1.79
C2082HP 50.80 15.88 28.58 11.34 8.08 32.40 34.30 16.20 18.10 24.10 3.20 51.00 7.70 3.17
Note: ※C2040HP thru C2080HP are rollerless; R shows bushing dia.

44
Stainless Hollow Pin Chains

ROLLER CHAINS
T
L1
D R
LC LR W
L2
T

ROLLER CHAINS
DOUBLE PITCH
P d

STAINLESS HP STANDARD
Dimens ions - mm Average Maximum

HOLLOW PIN CHAINS

C hain Bushing Hollows Pin Plate Ultimate Allowable Weight
Pitc h S trength Load
No. Width Dia. Outside Inside Length Height Thic k.
P W R D d LR LC L1 L2 H T kN kN kg/m
40HP-SS 12.70 7.95 7.92 5.63 4.03 16.70 17.60 8.40 9.20 12.00 1.50 7.65 0.44 0.58
50HP-SS 15.875 9.53 10.16 7.09 5.13 20.10 21.30 10.10 11.20 15.00 2.00 11.80 0.69 0.97
60HP-SS 19.05 12.70 11.91 8.29 6.04 26.00 27.20 13.00 14.20 18.10 2.40 17.10 1.03 1.46
80HP-SS 25.40 15.88 15.88 11.34 8.08 32.40 34.30 16.20 18.10 24.10 3.20 31.00 1.77 2.47

CORROSION RESISTANT
ROLLER CHAINS
Double Pitch Stainless Hollow Pin Chains
T
L1
D R
LC LR W
L2
T

LEAF CHAINS
H

P d

STAINLESS HP DOUBLE PITCH

Dimens ions - mm Average Maximum
ATTACHMENT

C hain R oller Hollows Pin Plate Ultimate Allowable Weight

CHAINS

Pitc h S trength Load

No. Width Dia. Outside Inside Length Height Thic k.
P W R D d LR LC L1 L2 H T kN kN kg/m
C2040HP-SS 25.40 7.95 7.92 5.63 4.03 16.70 17.60 8.40 9.20 12.00 1.50 7.65 0.44 0.46
C2050HP-SS 31.75 9.53 10.16 7.09 5.13 20.10 21.30 10.10 11.20 15.00 2.00 11.80 0.69 0.76
C2060HP-SS 38.10 12.70 11.91 8.29 6.04 26.00 27.20 13.00 14.20 18.10 2.40 17.10 1.03 1.12
C2080HP-SS 50.80 15.88 15.88 11.34 8.08 32.40 34.30 16.20 18.10 24.10 3.20 31.00 1.77 1.98
INFORMATION
TECHNICAL

C2042HP-SS 25.40 7.95 15.88 5.63 4.03 16.70 17.60 8.40 9.20 12.00 1.50 7.65 0.44 0.81
C2052HP-SS 31.75 9.53 19.05 7.09 5.13 20.10 21.30 10.10 11.20 15.00 2.00 11.80 0.69 1.25
C2062HP-SS 38.10 12.70 22.23 8.29 6.04 26.00 27.20 13.00 14.20 18.10 2.40 17.10 1.03 1.79
C2082HP-SS 50.80 15.88 28.58 11.34 8.08 32.40 34.30 16.20 18.10 24.10 3.20 31.00 1.77 3.17
Note: ※C2040HP thru C2080HP are rollerless; R shows bushing dia.

45
CORROSION RESISTANT ROLLER CHAINS

Stainless Steel Chains

Stainless Steel Roller Chains are manufactured of class 300 stainless steel to ANSI & BS dimension-
al specifications. These chains are ideal for highly acidic or alkaline locations, or where the chain
will be exposed to water, and for very high or very low temperature locations where resistance
to corrosion and heat is a requirement.

T
L1 D R
LC W LR
L2
T

ANSI
Dimens ions - mm Minimum Maximum Average
C hain R oller Pin Plate Ultimate Allowable C hain
Pitc h S trength Load Weight
No. Width Dia. Dia. Length Height Thic k.
P W R D LR LC L1 L2 H T kN kN kg/m
25-SS 6.35 3.20 ※3.30 2.30 ― ― 3.80 4.70 6.00 0.75 ― 0.11 0.13
35-SS 9.525 4.78 ※5.08 3.58 12.20 13.70 6.10 7.60 9.00 1.25 5.68 0.26 0.34
40-SS 12.70 7.95 7.92 3.96 16.90 18.50 8.50 10.00 11.70 1.50 11.10 0.44 0.60
50-SS 15.875 9.53 10.16 5.08 20.80 22.30 10.40 11.90 14.60 2.00 17.60 0.68 0.98
60-SS 19.05 12.70 11.91 5.95 26.00 27.90 13.00 14.90 17.50 2.40 24.50 1.03 1.46
80-SS 25.40 15.88 15.88 7.93 32.80 35.50 16.40 19.10 23.40 3.20 42.30 1.77 2.52
100-SS 31.75 19.05 19.05 9.53 40.00 43.30 20.00 23.30 29.30 4.00 51.00 2.55 3.91
120-SS 38.10 25.40 22.23 11.10 50.40 54.20 25.20 29.00 35.10 4.80 68.60 3.92 5.76
140-SS 44.45 25.40 25.40 12.70 54.00 58.30 27.00 31.30 40.90 5.60 88.20 4.66 7.41
160-SS 50.80 31.75 28.58 14.28 64.30 68.70 32.20 36.50 46.70 6.40 109.80 6.37 9.79

BS
06B -SS 9.525 5.72 6.35 3.28 12.60 13.40 6.30 7.10 8.20 1.00/1.25 6.18 0.27 0.43
08B -SS 12.70 7.75 8.51 4.45 16.70 18.00 8.40 9.60 11.80 1.50 10.30 0.52 0.61
10B -SS 15.875 9.65 10.16 5.08 19.00 20.70 9.50 11.20 14.70 1.65 15.70 0.68 0.89
12B -SS 19.05 11.68 12.07 5.72 22.00 23.60 11.00 12.60 16.10 1.80 18.10 0.88 1.14
16B -SS 25.40 17.02 15.88 8.26 35.10 38.20 17.60 20.60 20.30 3.20/4.00 42.20 2.06 2.59
Note: ※C hain is rollerle s s ; R s hows bushing dia.

46
 ROLLER CHAINS
T
L1 D R
LC LR W
L2
T

ROLLER CHAINS
DOUBLE PITCH
P

T
L1 D R
LC LR W
L2
T

HOLLOW PIN CHAINS

P

T
L1 D R
LC LR W
L2
T

CORROSION RESISTANT
P

ROLLER CHAINS
DOUBLE PITCH
Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Ultimate Allowable C hain
Pitc h S trength Load Weight
No. Width Dia. Dia. Length Height Thic k.
P W R D LR LC L1 L2 H T kN kN kg/m

LEAF CHAINS
A 2040-SS 25.40 7.95 7.92 3.96 16.90 18.50 8.50 10.00 11.40 1.50 12.40 0.44 0.43
A 2050-SS 31.75 9.53 10.16 5.08 20.80 22.30 10.40 11.90 15.00 2.00 20.30 0.68 0.73
A 2060-SS 38.10 12.70 11.91 5.95 26.00 27.90 13.00 14.90 17.00 2.40 27.40 1.03 1.03
A 2080-SS 50.80 15.88 15.88 7.93 32.80 35.50 16.40 19.10 22.60 3.20 47.10 1.77 1.71
C 2040-SS 25.40 7.95 7.92 3.96 16.90 18.50 8.50 10.00 11.40 1.50 12.40 0.44 0.48
C 2050-SS 31.75 9.53 10.16 5.08 20.80 22.30 10.40 11.90 15.00 2.00 20.30 0.68 0.82
C 2060H -SS 38.10 12.70 11.91 5.95 28.80 30.90 14.40 16.50 17.00 3.20 27.40 1.03 1.38
ATTACHMENT

C 2080H -SS 50.80 15.88 15.88 7.93 35.70 38.80 17.90 20.90 22.60 4.00 47.10 1.77 2.32
CHAINS

C 2100H -SS 63.50 19.05 19.05 9.53 42.40 46.00 21.20 24.80 28.60 4.80 56.90 2.55 3.46
C 2120H -SS 76.20 25.40 22.23 11.10 52.80 57.20 26.40 30.80 34.90 5.60 76.50 3.92 4.92
C 2042- SS 25.40 7.95 15.88 3.96 16.90 18.50 8.50 10.00 11.40 1.50 12.40 0.44 0.82
C 2052- SS 31.75 9.53 19.05 5.08 20.80 22.30 10.40 11.90 15.00 2.00 20.30 0.68 1.26
C 2062H -SS 38.10 12.70 22.23 5.95 28.80 30.90 14.40 16.50 17.00 3.20 27.40 1.03 2.08
C 2082H -SS 50.80 15.88 28.58 7.93 35.70 38.80 17.90 20.90 22.60 4.00 47.10 1.77 3.36
C 2102H -SS 63.50 19.05 39.67 9.53 42.40 46.00 21.20 24.80 28.60 4.80 56.90 2.55 5.64
INFORMATION
TECHNICAL

C 2122H -SS 76.20 25.40 44.45 11.10 52.80 57.20 26.40 30.80 34.90 5.60 76.50 3.92 7.87

47
CORROSION RESISTANT ROLLER CHAINS

Nickel-Plated Chains
Nickel Plated Chains are manu-
T
L1 D
R
factured for the usage of out-
LC W LR
L2 door operations and in situa-
T
tions where
machinery must be run in a
T lightly corrosive atmosphere or
D R W where good chain apperance
TP T may be desired.
LC LR

TP

ANSI
Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Trans . Ultimate Allowable C hain
Pitc h
No. Width Dia. Dia. Length Height Thic k. Pitc h S trength Load Weight
P W R D LR LC L1 L2 H T TP kN kN kg/m
35-NP 9.525 4.80 ※5 .08 3.58 12.00 12.90 6.00 6.90 8.90 1.25 10.80 2.48 0.34
40-NP 12.70 7.95 7.92 3.96 16.50 17.90 8.30 9.60 11.60 1.50 19.10 4.17 0.60
50-NP 15.875 9.53 10.16 5.08 20.40 22.00 10.20 11.80 14.50 2.00 31.90 7.22 0.98
60-NP 19.05 12.70 11.91 5.95 25.50 26.90 12.80 14.10 17.40 2.40 43.10 10. 70 1.46
80-NP 25.40 15.88 15.88 7.93 32.80 35.10 16.40 18.70 23.40 3.20 78.50 19.10 2.52
100-NP 31.75 19.05 19.05 9.53 39.40 43.00 19.70 23.30 29.30 4.00 118.00 29.40 3.91
35-2NP 9.525 4.80 ※5 .08 3.58 22.10 23.00 11.10 11.90 8.90 1.25 10.10 21.60 3.67 0.63
40-2NP 12.70 7.95 7.92 3.96 30.80 32.20 15.40 16.80 11.60 1.50 14.40 38.20 6.17 1.22
50-2NP 15.875 9.53 10.16 5.08 38.40 40.00 19.20 20.80 14.50 2.00 18.10 63.80 10.70 2.00
60-2NP 19.05 12.70 11.91 5.95 48.20 49.70 24.00 25.70 17.40 2.40 22.80 86.20 14.70 2.95
80-2NP 25.40 15.88 15.88 7.93 61.60 64.50 30.80 33.70 23.40 3.20 29.30 157.00 25.00 5.10
100-2NP 31.75 19.05 19.05 9.53 75.10 78.80 37.60 41.20 29.30 4.00 35.80 236.00 38.40 7.74

BS
06B-NP 9.525 5.72 6.35 3.28 12.60 13.60 6.30 7.10 8.26 1.30/1.00 8.92 1.77 0.43
08B-NP 12.70 7.75 8.51 4.45 16.70 18.20 8.40 9.80 11.80 1.50 17.80 3.14 0.61
10B-NP 15.875 9.65 10.16 5.08 19.00 20.70 9.50 11.20 14.70 1.65 22.20 4.90 0.89
12B-NP 19.05 11.68 12.07 5.72 22.00 23.60 11.00 12.60 16.10 1.80 28.90 7.06 1.14
16B-NP 25.40 17.02 15.88 8.26 35.10 38.20 17.60 20.60 21.00 3.20 60.00 12.60 2.59
20B-NP 31.75 19.56 19.05 10.16 40.20 44.00 20.10 23.90 26.40 3.50 95.00 19.60 3.76
06B-2NP 9.525 5.72 6.35 3.28 22.90 23.85 11.50 12.20 8.26 1.30/1.00 10.24 16.90 3.00 0.81
08B-2NP 12.70 7.75 8.51 4.45 30.60 31.90 15.30 16.60 11.80 1.50 13.92 31.10 5.35 1.26
10B-2NP 15.875 9.65 10.16 5.08 35.60 37.30 17.80 19.50 14.70 1.65 16.59 44.50 8.33 1.79
12B-2NP 19.05 11.68 12.07 5.72 41.60 43.10 20.80 22.30 16.10 1.80 19.46 57.80 12.00 2.28
16B-2NP 25.40 17.02 15.88 8.26 67.20 70.10 33.60 36.50 20.60 3.20/4.00 31.88 106.00 21.40 5.13
20B-2NP 31.75 19.56 19.05 10.16 76.80 80.60 38.40 42.20 26.40 3.50/4.50 36.45 170.00 33.30 7.26
Note: ※ C hain is rollerles s ; R s hows bus hing dia.

48
Nickel-Plated Double Pitch Chains

ROLLER CHAINS
T
L1 D R
LC LR W
L2
T

ROLLER CHAINS
P

DOUBLE PITCH
T
L1 D R
LC LR W
L2
T

HOLLOW PIN CHAINS

H

T
L1 D R
R
LC LR W
L2

CORROSION RESISTANT
T

ROLLER CHAINS
H

NP DOUBLE PITCH

LEAF CHAINS
Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Ultimate Allowable C hain
Pitc h Strength Load Weight
No. Width Dia. Dia. Length Height Thic k.
P W R D LR LC L1 L2 H T kN kN kg/m
A 2040-N P 25.40 7.95 7.92 3.96 16.50 17.90 9.30 9.60 11.40 1.50 16.90 3.63 0.43
A 2050-N P 31.75 9.53 10.16 5.08 20.40 22.00 10.20 11.80 15.00 2.00 27.50 6.28 0.73
A 2060-N P 38.10 12.70 11.91 5.95 25.50 26.90 12.80 14.10 17.00 2.40 40.20 8.63 1.03
ATTACHMENT

A 2080-N P 50.80 15.88 15.88 7.93 32.80 35.20 16.40 18.80 22.60 3.20 68.60 14.70 1.71
CHAINS

C 2040-N P 25.40 7.95 7.92 3.96 16.50 18.50 8.20 10.30 11.40 1.50 16.90 3.63 0.48
C 2050-N P 31.75 9.53 10.16 5.08 20.40 22.00 10.20 11.80 15.00 2.00 27.50 6.28 0.82
C 2060H -N P 38.10 12.70 11.91 5.95 28.70 31.00 14.40 16.60 17.00 3.20 40.20 8.63 1.38
C 2080H -N P 50.80 15.88 15.88 7.93 35.50 38.80 17.80 21.00 22.60 4.00 68.60 14.70 2.32
C 2100H -N P 63.50 19.05 19.05 9.53 42.20 45.70 21.10 24.60 28.60 4.80 107.90 22.60 3.46
C 2042-N P 25.40 7.95 15.88 3.96 16.50 18.50 8.20 10.30 11.40 1.50 16.90 3.63 0.82
INFORMATION
TECHNICAL

C 2052-N P 31.75 9.53 19.05 5.08 20.40 22.00 10.20 11.80 15.90 2.00 27.50 6.28 1.26
C 2062H -N P 38.10 12.70 22.23 5.95 28.70 31.00 14.40 16.60 17.00 3.20 40.20 8.63 2.08
C 2082H -N P 50.80 15.88 28.58 7.93 35.50 38.80 17.80 21.00 22.60 4.00 68.60 14.70 3.36
C 2102H -N P 63.50 19.05 39.67 9.53 42.20 45.70 21.10 24.60 28.60 4.80 107.90 22.60 5.64

49
SIDE BOW CHAINS

Side Bow Chains

In Side Bow Chains, pin-to-bush-
ing clearance are much greater
LR than in standard roller chains
R T
L1 D
and double pitch roller chains,
L
L2
r
W and these, plus the clearances
T
between inner and outer links,
enable the chain to be used
while bowed transversely.
Basic dimensions conform to
H ANSI chains dimensions, enable
P
standard sprockets to be util-
ized.

SB STANDARD
Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Min.Curve Ultimate Allowable C hain
Pitc h
No. Width Dia. Out Dia. Length Height Thic k. Radius S trength Load Weight
P W R D LR LC L1 L2 H T r kN kN kg/m
40 S B 12.70 7.95 7.92 3.58 16.90 18.90 8.50 10.40 11.70 1.50 350 14.90 1.77 0.63
50 S B 15.875 9.53 10.16 4.45 21.10 23.10 10.60 12.50 14.60 2.00 400 22.10 3.14 1.03
60 S B 19.05 12.70 11.91 5.08 26.30 28.10 13.20 14.90 17.50 2.40 500 29.40 4.22 1.46
80 S B 25.40 15.88 15.88 7.13 33.40 36.40 16.70 19.70 23.40 3.20 600 57.90 7.65 2.42
⃝S tainles s s teel, nic kel plated, and with attac hments are s upplied on reques t.

Side Bow Double Pitch Chains

R T
L1 D LR
LC W
L2
T
r

SB DOUBLE PITCH
Dimens ions - mm Average Maximum Average
C hain R oller Pin Plate Min.Curve Ultimate Allowable C hain
Pitc h
No. Width Dia. Out Dia. Length Height Thic k. Radius S trength Load Weight

P W R D LR LC L1 L2 H T r kN kN kg/m
C 2 040 SB 25.40 7.95 7.92 3.58 16.90 18.90 8.50 10.40 11.40 1.50 700 14.90 1.77 0.48
C 2 050 SB 31.75 9.53 10.16 4.45 21.10 23.10 10.60 12.50 15.00 2.00 800 22.10 3.14 0.82
C 2 060 SB 38.10 12.70 11.91 5.08 26.30 28.10 13.20 14.90 17.00 2.40 1000 29.40 4.22 1.20
C 2 042 SB 25.40 7.95 15.88 3.58 16.90 18.90 8.50 10.40 11.40 1.50 700 14.90 1.77 0.82
C 2 052 SB 31.75 9.53 19.05 4.45 21.10 23.10 10.60 12.50 15.00 2.00 800 22.10 3.14 1.26
C 2 062 SB 38.10 12.70 22.23 5.08 26.30 28.10 13.20 14.90 17.00 2.40 1000 29.40 4.22 2.01

50
LEAF CHAINS

Leaf Chains

ROLLER CHAINS
Leaf chains are well suited for any applica-
tion requiring flexible, high strength link-
age for reciprocating motion or lift at rela-
tively low speed. For their low cost and
long life, widely used for lift trucks, masts
and other lifting as construction and min-
2X2 2X3 3X4 4X4 4X6 6X6 ing machines and excellent as balance and
counterweights of machine tools and so

ROLLER CHAINS
T
forth.

DOUBLE PITCH
L
CONSTRUCTION AND LACING
D COMBINATIONS
S
Built of interlaced plates held together by
H riveted pins. The chain nomenclature indi-
P
cates the lacing combinations.

HOLLOW PIN CHAINS

AL SERIES (LIGHT DUTY)
Consisting of link plates of the same contour and
thickness as the pin link plates of ANSI roller chains
in same pitch. Mainly used for relatively constant,
low, medium load with less shock.

Dimens ions - mm Average Maximum

CORROSION RESISTANT
C hain Pin Plate Hole Ultimate Allowable Weight

ROLLER CHAINS
Lac ing Pitc h
No. Dia. Length Height Thickness Dia S trength Load
P D L H T S kN kN kg/m
AL422 2×2 8.40 18.60 1.86 0.36
AL444 4×4 12.70 3.96 14.60 10.30 1.50 4.03 37.30 3.43 0.70
AL466 6×6 21.20 55.90 3.92 1.04
AL522 2×2 10.50 30.40 3.04 0.58
AL544 4×4 15.875 5.08 19.00 12.70 2.00 5.15 60.80 5.30 1.16

LEAF CHAINS
AL566 6×6 27.60 94.10 6.28 1.73
AL622 2×2 12.40 43.10 4.41 0.81
AL644 4×4 19.05 5.95 22.20 15.20 2.40 6.04 86.30 7.45 1.68
AL666 6×6 32.60 129.00 8.73 2.46
AL822 2×2 16.60 72.60 7.35 1.42
AL844 4×4 25.40 7.93 29.40 20.20 3.20 8.00 145.00 13.20 2.88
AL866 6×6 43.00 218.00 15.40 4.23
AL1022 2×2 19.60 108.00 11.60 2.46
ATTACHMENT

AL1044 4×4 31.75 9.53 36.20 24.50 4.00 9.59 216.00 20.60 4.81
CHAINS

AL1066 6×6 53.50 324.00 24.00 7.24

AL1222 2×2 24.00 152.00 16.50 3.35
AL1244 4×4 38.10 11.10 43.70 29.20 4.80 11.22 304.00 29.10 6.58
AL1266 6×6 63.40 456.00 34.20 9.82
AL1422 2×2 27.80 205.00 22.10 4.99
AL1444 4×4 44.45 12.70 51.20 34.20 5.60 12.82 410.00 38.90 9.56
INFORMATION
TECHNICAL

AL1466 6×6 73.60 615.00 46.10 14.13

AL1622 2×2 31.80 269.00 28.30 6.35
AL1644 4×4 50.80 14.28 58.40 40.30 6.40 14.47 539.00 49.90 12.62
AL1666 6×6 84.80 809.00 58.80 18.87

51
LEAF CHAINS

BL SERIES (HEAVY DUTY)

Consisting of link plates with next large size pitch chain of ANSI roller chains. Chiefly used for
medium load with greater shock.
Dimens ions - mm Average Maximum
C hain Pin Plate Hole Ultimate Allowable Weight
Lac ing Pitc h S trength
No. Dia. Length Height Thickness Dia Load
P D L H T S kN kN kg/m
BL422 2×2 10. 50 27. 50 4. 51 0. 64
BL423 2×3 12. 50 27. 50 4. 51 0. 79
BL434 3×4 16. 80 40. 70 5. 30 1. 07
12. 70 5. 08 11. 70 2. 00 5. 15
BL444 4×4 19. 00 54. 40 5. 98 1. 22
BL446 4×6 23. 00 54. 40 5. 98 1. 58
BL466 6×6 27. 50 82. 50 9. 81 1. 89
BL522 2×2 12. 40 42. 70 6. 86 1. 01
BL523 2×3 15. 00 42. 70 6. 86 1. 19
BL534 3×4 20. 00 64. 00 8. 33 1. 61
15. 875 5. 95 14. 60 2. 40 6. 04
BL544 4×4 22. 20 85. 30 9. 41 1. 80
BL546 4×6 27. 60 85. 30 9. 41 2. 26
BL566 6×6 32. 40 127. 00 15. 70 2. 65
BL622 2×2 16. 60 70. 60 9. 81 1. 53
BL623 2×3 19. 50 70. 60 9. 81 1. 89
BL634 3×4 26. 20 106. 00 12. 30 2. 68
19. 05 7. 93 17. 50 3. 20 8. 00
BL644 4×4 29. 20 141. 00 13. 70 3. 04
BL646 4×6 36. 50 141. 00 13. 70 4. 15
BL666 6×6 43. 00 212. 00 24. 50 4. 58
BL822 2×2 19. 60 114. 00 17. 00 2. 57
BL823 2×3 23. 80 114. 00 17. 00 3. 17
BL834 3×4 32. 50 172. 00 20. 60 4. 37
25. 40 9. 53 24. 00 4. 00 9. 59
BL844 4×4 36. 20 228. 00 23. 50 4. 95
BL846 4×6 45. 00 228. 00 23. 50 6. 23
BL866 6×6 53. 50 342. 00 40. 20 7. 44
BL1022 2×2 24. 00 157. 00 26. 00 3. 73
BL1023 2×3 28. 60 157. 00 26. 00 4. 64
BL1034 3×4 38. 70 245. 00 31. 40 6. 50
31. 75 11. 10 29. 30 4. 80 11. 20
BL1044 4×4 43. 70 314. 00 36. 30 7. 41
BL1046 4×6 53. 40 314. 00 36. 30 9. 21
BL1066 6×6 63. 40 471. 00 58. 80 11. 07
BL1222 2×2 27. 80 207. 00 36. 80 4. 77
BL1223 2×3 34. 20 207. 00 36. 80 6. 46
BL1234 3×4 45. 50 332. 00 44. 10 9. 05
38. 10 12. 70 35. 10 5. 60 12. 82
BL1244 4×4 51. 20 414. 00 50. 50 10. 27
BL1246 4×6 62. 60 414. 00 50. 50 11. 86
BL1266 6×6 73. 60 621. 00 73. 10 14. 40
BL1422 2×2 31. 80 270. 00 49. 00 7. 87
BL1423 2×3 38. 80 270. 00 49. 00 8. 90
BL1434 3×4 51. 70 405. 00 58. 80 11. 61
44. 45 14. 28 40. 90 6. 40 14. 39
BL1444 4×4 58. 40 539. 00 67. 70 12. 87
BL1446 4×6 71. 20 539. 00 67. 70 17. 86
BL1466 6×6 84. 80 810. 00 95. 10 22. 33
BL1622 2×2 35. 80 392. 00 58. 80 9. 77
BL1623 2×3 43. 70 392. 00 58. 80 12. 08
BL1634 3×4 58. 90 618. 00 70. 60 16. 85
50. 80 17. 45 46. 70 7. 20 17. 62
BL1644 4×4 65. 90 785. 00 80. 40 18. 85
BL1646 4×6 80. 20 785. 00 80. 40 23. 94
BL1666 6×6 96. 20 1176. 00 137. 30 28. 54

52
LL SERIES
Consisting of link plates of the same contour and thickness as the
pin link plates of BS roller chains in same pitch.

ROLLER CHAINS
Dimens ions - mm Minimum
C hain Pin Plate Hole Ultimate Weight
Lac ing Pitc h
No. Dia. Length Height Thickness Dia S trength
P D L H T S kN kg/m
LL0822 2×2 7.60 17.80 0.31
LL0844 4×4 12.70 4.45 13.00 10.90 1.25 4.46 31.10 0.60
LL0866 6×6 18.40 44.50 0.89
LL1022 2×2 9.30 22.20 0.48

ROLLER CHAINS
DOUBLE PITCH
LL1044 4×4 15.875 5.08 16.10 13.70 1.65 5.09 44.50 0.94
LL1066 6×6 22.90 66.70 1.40
LL1222 2×2 10.70 28.90 0.63
LL1244 4×4 19.05 5.72 18.50 16.10 1.80 5.73 57.80 1.22
LL1266 6×6 26.30 86.70 1.82
LL1622 2×2 17.20 58.00 1.48

HOLLOW PIN CHAINS

LL1644 4×4 25.40 8.28 30.20 21.00 3.20 8.30 116.00 2.90
LL1666 6×6 43.20 174.00 4.31
LL2022 2×2 20.10 95.00 2.17
LL2044 4×4 31.75 10.19 35.10 26.40 3.50 10.21 190.00 4.24
LL2066 6×6 50.10 285.00 6.30
LL2422 2×2 28.40 170.00 4.02
LL2444 4×4 38.10 14.63 49.40 33.40 4.80 14.65 340.00 7.79
LL2466 6×6 70.40 510.00 11.55

CORROSION RESISTANT
LL2822 2×2 34.00 200.00 5.42

ROLLER CHAINS
LL2844 4×4 44.45 15.90 60.00 37. 00 6.30 15.92 400.00 10.56
LL2866 6×6 86.00 600.00 15.71
LL3222 2×2 35.00 260.00 5.92
LL3244 4×4 50.80 17.81 61.00 42.20 6.30 17.83 520.00 11.50
LL3266 6×6 87.00 780.00 17.06

LEAF CHAINS
ATTACHMENT
CHAINS
INFORMATION
TECHNICAL

53
ATTACHMENT CHAINS

ANSI Standard Attachment Chains

A-1 attachment K-1 attachment
d M d M

T K T
J
L1 D L1 D
R R W J K
W
L2 L2
T T

S S
H H
Z Z

P P

A-1,K-1 ATTACHMENT
C ommon Dimens ions Original Dimens ions Additional Weight
C hain
A-1 K -1 A-1 K -1
No. M d S Z
J K 2J 2K g/pc
35 7.90 3.40 6.40 4.50 9.50 14.30 19.10 28.60 0.90 1.80
40 9.50 3.60 7.90 5.80 12.70 17.30 25.40 34.60 1.20 2.40
50 12.70 5.20 10.30 7.30 15.90 23.30 31.80 46.60 4.00 8.00
60 15.90 5.20 11.90 8.70 19.10 28.10 38.10 56.20 6.50 13.00
80 19.10 6.80 15.90 11.70 25.40 35.90 50.80 71.80 13.00 26.00
100 25.40 8.80 19.80 14.60 31.80 44.30 63.60 88.60 27.00 54.00
120 28.60 10.50 23.00 17.50 38.10 54.70 76.20 109.40 47.00 94.00
140 34.70 12.00 28.60 20.40 44.50 63.20 89.00 126.40 65.00 130.00
160 38.10 14.00 31.80 23.30 50.80 71.90 101.60 143.80 88.00 176.00
Note: Refer to the standard roller chain for dimensions not stated here.

SA-1 attachment SK-1 attachment

T T
L1 D L1 D
R W R W
L2 L2
T T

M d M
M d

X X
C C

Z Z

P P

SA-1,SK-1 ATTACHMENT
C ommon Dimens ions Additional Weight
C hain
S A-1 S K -1
No. M d C X Z
g/pc
35 7.90 3.40 9.50 14.50 4.50 0.90 1.80
40 9.50 3.60 12.70 18.50 5.80 1.20 2.40
50 12.70 5.20 15.90 23.00 7.30 4.00 8.00
60 15.90 5.20 18.30 26.70 8.70 6.50 13.00
80 19.10 6.80 24.60 34.50 11.70 13.00 26.00
100 25.40 8.80 31.80 43.00 14.60 27.00 54.00
120 28.60 10.50 36.60 51.40 17.50 47.00 94.00
140 34.70 12.00 44.40 63.10 20.40 65.00 130.00
160 38.10 14.00 50.80 69.50 23.30 88.00 176.00
Note: Refer to the standard roller chain for dimensions not stated here.

54
 ROLLER CHAINS
D-1 attachment D-3 attachment

L3 DP DP
L3
L4 T L4 T
D R D R
W W
L2 L2
T T

ROLLER CHAINS
DOUBLE PITCH
H H

P P

D-1,D-3 ATTACHMENT

HOLLOW PIN CHAINS

C ommon Dimens ions Additional Weight
C hain
D-1 D-3
No. Dp L3 L4 H
g/pc
35 3.58 9.50 14.70 9.00 0.80 1.60
40 3.96 9.50 16.80 11.70 1.00 2.00
50 5.08 11.90 21.00 14.60 2.00 4.00
60 5.95 14.30 25.90 17.50 3.00 6.00

CORROSION RESISTANT
80 7.93 19.10 33.90 23.40 7.00 14.00

ROLLER CHAINS
100 9.53 23.80 41.90 29.30 12.00 24.00
120 11.10 28.60 51.40 35.10 20.00 40.00
140 12.70 33.30 57.50 40.90 30.00 60.00
160 14.28 38.10 67.40 46.70 45.00 90.00
Note: Refer to the standard roller chain for dimensions not stated here.

WA-1,WA-2 WK-1,WK-2 WSA-1,WSA-2 WSK-1,WSK-2

M
d

LEAF CHAINS
N
T T
L1 D L1 D
T K R W R W
J
L1 D L2 L2
R W T T
L2
T M
M M
d d
N
N N

X X
S C C
H

P P P
ATTACHMENT
CHAINS

WA-1,WA-2,WK-1,WK-2,WSA-1,WSA-2,WSK-1,WSK-2 ATTACHMENT
C ommon Dimens ions Original Dimens ions
C hain
WA WK WS A, WS K
No. M d N S
J K 2J 2K C X
INFORMATION

40 24.30 3.60 12.70 7.90 12.70 17.30 25.40 34.60 12.70 17.30
TECHNICAL

50 30.40 5.20 15.90 10.30 15.90 23.30 31.80 46.60 15.90 23.10
60 36.50 5.20 19.10 11.90 19.10 28.10 38.10 56.20 18.30 27.10
80 48.60 6.80 25.40 15.90 25.40 35.90 50.80 71.80 24.60 34.50
100 61.00 8.80 31.80 19.80 31.80 44.30 63.60 88.60 31.80 43.00
Note: Refer to the standard roller chain for dimensions not stated here.

55
ATTACHMENT CHAINS

BS Standard Attachment Chains

A-1 attachment K-1 attachment

d M d M

T K T
J
L1 D L1 D
R R W J K
W
L2 L2
T T

S S
H H

P P

A-1, K-1 ATTACHMENT

C ommon Dimens ions Original Dimens ions Additional Weight
C hain
A-1 K -1 A-1 K -1
No. M d S
J K 2J 2K g/pc
08B 11.00 4.30 8.50 13.80 20.90 27.60 41.80 2.00 4.00
10B 14.00 5.30 10.50 15.80 24.20 31.60 48.40 3.20 6.40
12B 18.00 6.40 12.20 17.60 27.30 35.20 54.60 4.50 9.00
16B 24.00 8.40 17.00 29.00 41.90 58.00 83.80 20.00 40.00
20B 30.00 10.50 21.00 34.50 47.50 69.00 98.60 25.00 50.00
Note: Refer to the standard roller chain for dimensions not stated here.

SA-1 attachment
SK-1 attachment

T T
L1 D L1 D
R W R W
L2 L2
T T

M d M d

X X
C C

Z Z
P P

SA-1, SK-1 ATTACHMENT

C ommon Dimens ions Additional Weight
C hain
S A-1 S K -1
No. M d C X Z
g/pc
08B 11.00 4.30 13.70 20.80 5.90 2.00 4.00
10B 14.00 5.30 16.50 24.90 7.40 3.20 6.40
12B 18.00 6.40 18.50 28.10 8.10 4.50 9.00
16B 24.00 8.40 27.40 40.00 10.30 20.00 40.00
20B 30.00 10.50 33.00 47.50 13.20 25.00 50.00
Note: Refer to the standard roller chain for dimensions not stated here.

56
 ROLLER CHAINS
D-1 attachment D-3 attachment

L3 D P DP
L3
L4 T L4 T
D R D R
W W
L2 L2
T T

ROLLER CHAINS
DOUBLE PITCH
H H

P P

HOLLOW PIN CHAINS

D-1, D-3 ATTACHMENT
C ommon Dimens ions Additional Weight
C hain
D-1 D-3
No. Dp L3 L4 H
g/pc
08B 4.45 14.80 21.80 11.80 1.80 3.60
10B 5.08 17.60 25.90 14.70 2.80 5.60
12B 5.72 20.70 30.50 16.10 4.10 8.20

CORROSION RESISTANT
16B 8.26 33.30 49.30 20.60 14.00 28.00

ROLLER CHAINS
20B 10.16 38.30 56.60 26.40 24.30 48.60
Note: Refer to the standard roller chain for dimensions not stated here.

LEAF CHAINS
ATTACHMENT
CHAINS
INFORMATION
TECHNICAL

57
ATTACHMENT CHAINS

Double Pitch Attachment Chains

A-1 attachment A-2 attachment

d M d
M
N

K T K T
J J
L1 D L1 D
R R R R
L2 W L2 W
T
T

T T

S S
H H
Z ZZ Z ZZ

P P

K-1 attachment K-2 attachment

d M d
M
N

K T K T
L1 D L1
R R R R 2J
W 2J W
L2 L2
K T K T

T T

S S
H H
Z ZZ Z ZZ

P P

A-1,A-2,K-1,K-2 ATTACHMENT
C hain No. Dimens ions - mm
Small Large A-1, A-2 K -1, K -2
M d N S Z ZZ
R oller R oller J K 2J
C 2040 19.10 3.60 9.50 9.10 5.70 − 12.70 19.10 25.40
C 2042      7.94
C 2050 23.80 5.20 11.90 11.10 7.50 − 15.90 24.20 31.80
C 2052 9.53
C 2060H 28.60 5.20 14.30 14.70 8.50 − 21.40 31.20 42.80
C 2062H 11.11
C 2080H 38.10 6.80 19.10 19.10 11.30 − 27.80 40.60 55.60
C 2082H 14.29
C 2100H 47.60 8.80 23.80 23.40 14.30 − 33.30 50.00 66.60
C 2102H 19.84
C 2120H 57.20 10.50 28.60 27.80 17.40 − 39.70 61.90 79.40
C 2122H 22.22
C 2160H 76.20 14.00 38.10 36.50 23.80 − 52.40 76.10 104.80
C 2162H 28.58
Note: Refer to the standard roller chain for dimensions not stated here.

58
 ROLLER CHAINS
SA-1 attachment SA-2 attachment
T T
LL 1 D
D
L1 D R
R W
W
W
LL 2 L2
T T

ROLLER CHAINS
d2

DOUBLE PITCH
d1 T T
M N

X X
C2
C1
H H
Z Z

P P

HOLLOW PIN CHAINS

SK-1 attachment SK-2 attachment

T T
L1 D L1 D R
R W W
L2 L2
T T

d1 M d2

CORROSION RESISTANT
T T
M N

ROLLER CHAINS
X X
C1 C2
H H

P P

LEAF CHAINS
SA-1,SA-2,SK-1,SK-2 ATTACHMENT
C hain No. Dimens ions - mm
Small Large S A-1, S K -1 S A-2, S K -2
M X Z ZZ
R oller R oller C1 d1 C2 d2 N
C 2040 19.10 19.80 5.70 − 11.10 5.20 13.50 3.60 9.50
C 2042 7.94    
C 2050 23.80 24.60 7.50 − 14.30 6.80 15.90 5.20 11.90
ATTACHMENT

C 2052 9.53
CHAINS

C 2060H 28.60 30.60 8.50 − 17.50 8.80 19.10 5.20 14.30

C 2062H 11.11
C 2080H 38.10 40.20 11.30 − 22.20 10.50 25.40 6.80 19.10
C 2082H 14.29
C 2100H 47.60 50.30 14.30 − 28.60 14.00 31.80 8.80 23.80
C 2102H 19.84
INFORMATION
TECHNICAL

C 2120H 57.20 61.10 17.40 − 33.30 16.00 37.30 10.50 28.60

C 2122H 22.22
C 2160H 76.20 76.20 23.80 − 44.50 21.00 50.80 14.00 38.10
C 2162H 28.58
Note: Refer to the standard roller chain for dimensions not stated here.

59
ATTACHMENT CHAINS

Double Pitch Attachment Chains

D-1 attachment D-3 attachment

L3 DDP L3 DP
L4 T L4 T
D R D R
W W
L2 L2
T T

H H

P P

GK-1 attachment

T
L1 D R W
L2
T

D-1,D-3,GK-1 ATTACHMENT
C hain No. Dimens ions - mm Additional Weight
Small Large D-1, D-3 G K -1 D-1 D-3
R oller R oller Dp L3 L4 d g/pc
C 2040 C 2042 3.96 9.50 16.80 4.10 0.90 1.80
C 2050 C 2052 5.08 11.90 21.10  
6.40 1.80 3.60
C 2060H C 2062H 5.95 14.30 27.50 6.40 3.00 6.00
C 2080H C 2082H 7.93 19.10 35.60 8.10 7.00 14.00
C 2100H C 2102H 9.53 23.80 43.20 10.10 12.00 24.00
C 2120H C 2122H 11.10 28.60 53.00 12.10 20.00 40.00
C 2160H C 2162H 14.28 38.10 69.00 − 44.00 88.00
Note: Refer to the standard roller chain for dimensions not stated here.

60
ATTACHMENT CHAINS

Chains with Top Rollers

ROLLER CHAINS
These chains have rollers attached in the top center of the chain pitch, so that goods can be placed
directly onto the top roller.
The chain can move continuously while freight is stored, or it can be stopped temporarily.
The top rollers can also be made of plastic.

ROLLER CHAINS
DOUBLE PITCH
T
T

L1
L1

L1
L1

L
E

L
L1

L1
L2
L2

T
R1
R

HOLLOW PIN CHAINS

B

H
H

P P

CORROSION RESISTANT
ROLLER CHAINS
Dimensions - mm Average Average
C hain Top-Roller Pin Link Plate Ultimate Chain
Pitch Position Strength Weight
No. Dia. Width Length Height Thickness
P R R1 E L1 L2 H T B kN kg/m
40 12.70 11.00 15.88 7.95 8.20 9.10 11.70 1.50 12.70 19.10 1.10
50 15.875 15.00 19.05 9.53 10.30 11.60 14.60 2.00 15.90 31.90 1.61
60 19.05 18.00 22.23 12.70 12.70 13.90 17.50 2.40 18.30 43.10 2.80
80 25.40 24.00 28.58 15.88 16.20 18.80 23.40 3.20 24.60 78.50 4.60

LEAF CHAINS
100 31.75 30.00 39.67 19.10 19.60 23.20 29.30 4.00 31.80 118.00 7.60
C2040 25.40 − 15.88 7.95 8.20 10.30 11.40 1.50 15.00 19.10 1.29
C2050 31.75 − 19.05 9.53 10.30 11.60 15.00 2.00 19.00 31.90 1.99
C2060H 38.10 − 22.23 12.70 14.40 16.70 17.00 3.20 23.00 54.90 3.50
C2080H 50.80 − 28.58 15.88 17.80 21.10 22.60 4.00 29.00 90.20 5.30
Note: Refer to the standard roller chain or the double pitch conveyor roller chain for dimensions not stated here.
ATTACHMENT
CHAINS
INFORMATION
TECHNICAL

61
ATTACHMENT CHAINS

Side Roller Chains

These chains have side rollers built onto one or both sides, in parallel or staggered patterns.
The side rollers make the chains run extraordinarily smoothly.
Use of plastic side rollers reduces noise.

L3
L3

L1
L1

T
T
L1

L2
L2

T
T

L3
L3
L4

E
E

R R

H
H

P P

Parallel-type Alternative-type

Dimensions - mm Average
C hain Side-Roller Pin Link Plate Chain
Pitch Weight
No. Dia. Width Length Height Thick.
P R E L1 L2 L3 L4 H T kg/m
40 12.70 15.88 7.60 8.20 10.30 17.30 19.10 11.60 1.50 0.86
50 15.875 19.05 9.20 10.30 11.60 21.40 23.10 14.50 2.00 1.40
60 19.05 22.23 12.50 12.70 14.90 27.90 30.00 17.40 2.40 1.93
80 25.40 28.58 15.60 16.20 18.80 34.80 37.80 23.40 3.20 3.30
100 31.75 39.67 18.50 19.60 23.20 41.90 45.50 29.30 4.00 5.56
C2040 15.88 11.50 1.50 0.61
25.40 7.60 8.20 10.30 17.30 19.10
C2042 23.00 11.50 1.50 1.20
C2050 19.05 15.00 2.00 1.01
31.75 9.20 10.30 11.60 21.40 23.10
C2052 27.00 15.00 2.00 1.65
C2060H 22.23 17.00 3.20 1.65
38.10 12.50 14.40 16.70 29.50 31.60
C2062H 30.00 17.00 3.20 2.60
C2080H 50.80 28.58 15.60 17.80 21.10 36.50 39.50 22.80 4.00 2.74
Note: Refer to the standard roller chain or the double pitch conveyor roller chain for dimensions not stated here.

62
TECHNICAL INFORMATION

Trouble Shooting Hints

ROLLER CHAINS
The below chart shows the most common chain failures and causes,
but not necessarily the only ones.

ROLLER CHAINS
DOUBLE PITCH
Problem Pos s ible C aus es of Problem S ugges ted R emedy

・Overload ・Properly lubric ation

・Inadequate lubric ation ・R eplac e c hain when elongation
  exc eed func tional limits

HOLLOW PIN CHAINS

Pin or B us hing G alling

・Overload ・R eplac e c hain as s oon as pos s ible

・Inadequate lubric ation

CORROSION RESISTANT
ROLLER CHAINS
Turned Pins

・Too little or too muc h s lac k ・Adjus t c enters or take-up

・Chain obstruction ・Ins pec t & remove obs truc tion
E xc es s ive Nois e
・Loose chain guard or bearing ・Tighten bolts and check bearings

LEAF CHAINS
・E xc es s ive c hain s lac k ・Adjus t c hain tens ioner
・C enter dis tanc e too long ・Ins tall idler
C hain Vibration ・s tiff links ・Lubric ate or replac e c hain

・Mis alignment ・R ealign s proc kets and s hafts

・Replace chain and sprokets if necessary
Wear on ins ide of link
plate and one s ide of
ATTACHMENT

sproc ket teeth

CHAINS

・E xc es s ive load ・R eplac e c hain with one of s uitable

・Mis alignment  s trength
・I nadequate lubric ation ・Ins pec t alignment
C hain stiffens ・C lean and es tablis h c orrec t
・Corrosion
 lubric ation
・Replace with corrosion resistant chain
INFORMATION
TECHNICAL

・E xc es s ive c hain wear ・R eplac e c hain

・E xc es s ive c hain s lac k ・Ins tall tens ioner if nec es s ary
C hain Climbs S proc kets ・Inadequate lubric ation ・R eplac e s proc ket
・S proc ket tooth wear

63
TECHNICAL INFORMATION

Problem Pos s ible C aus es of Problem S ugges ted R emedy

・E xtreme overload ・Ins pec t the drive to determine the

 c aus e of high load
・R edes ign drive us ing a higher c apa-
 c ity c hain
B roken Pins

・Loading is greater than pins ・Ins pec t the drive to determine the
 dynamic c apac ity  c aus e of high load
・R edes ign drive us ing a higher c apa-
 c ity c hain
B roken Pins (c enter)

・Overload ・Onepitc h offsetlinks are not

 rec ommended
・R edes ign drive us ing a higher c apa-
 c ity c hain
Broken Offset Links Pins

・Loading is greater than c hain's ・Ins pec t the drive to determine the
 dynamic c apac ity c aus e of high load
・R edes ign drive us ing a higher c apa-
c ity c hain
Fatigue Failure

・S tres s c orros ion c rac king ・Protec t the c hain from c orros ion
・Ins tall anti-c orros ive c hains

C rac king

・Foreign material between ・R edes ign c hain s peed and load

  c hain and s proc ket tooth ・S hield drive from foreign matter
・Fatigue failure

B roken R ollers
・B ottom of plates w orn due ・ Chain should be replaced when
to rubbing on guides. wear becames over 5% of the
plates height

Worn Plates

・E xtreme overload ・Ins pec t the drive to determine the

c aus e of high load
・R edes ign drive us ing a higher c apa-
c ity c hain

Frac tured Plate

64
Selection of Transmission Roller Chains

ROLLER CHAINS
Coefficients Relevant to Selection
Tables 1 through 5 present the coefficients that are relevant to the selection of chains. All
values assume smooth operation, and for this reason, they are not suitable for special op-
erating conditions.

Service Coefficient Speed Coefficient

The transmission performance of chains requires smooth operation As the travel speed of a chain increases, operating conditions

ROLLER CHAINS
for full realization; accordingly, correction will need to be carried become more severe; consequently, the speed coefficient from the

DOUBLE PITCH
out for loading conditions. The service coefficients from the following table is used to indicate this severity.
following table are to be used at this time.

Table 1: Service Condition αU Table 2: Speed Coefficient αV

Motor type Internal Chain speed Speed coefficient
combustion
Type of ~15m/min 1.00
Motor Fluid No fluid
loading combu combu
Typical applications 15~30m/min 1.20
-stion -stion

HOLLOW PIN CHAINS

Pumps, blowers, generators, 30~50m/min 1.40
Even mixers, conveyors. Belts with little
load variation. 1.00 1.00 1.20

Standard machinery,
Slight compressors, automatic furnaces,
shock dryers. Conveyors with small 1.30 1.20 1.40
amounts of variation.
Crushers, compressors, press
Large
shock
equipment, mixers, civil 1.50 1.40 1.70 Safety Coefficient
engineering machinery
The safety coefficient (or safety factor, SF) is determined using the
formula shown below, and it should generally be maintained within

CORROSION RESISTANT
the 7 to 10 range. However, it is often necessary to raise the safety

ROLLER CHAINS
coefficient for certain usage conditions (i.e., chain speed, ambient
temperature, loading method, etc.). Furthermore, any legal
Multiplex Coefficient requirements must also be implemented at this time.
The transmission performance of multiplex chains is determined by
applying the multiplex coefficient from the following table to the Tensile strength
transmission performance for a single chain. SF=
Tensile force in chain (maximum applied load)
Table 3: Multiplex Coefficient αL
Multiplicity Multiplex coefficient
2 1.30 Table 4: Safety Coefficient (SF)

LEAF CHAINS
3 1.90 Chain speed Safety coefficient
4 2.50 ~25m/min 7.00
25~50m/min 8.00
CAUTION
The multiplex performance cannot be achieved by simply
multiplying the single-chain performance by the multiplicity.
ATTACHMENT
CHAINS

Example: Load W1 kgf applied to one of four chains used to suspend

an object of weight W = 3,000 kgf.
Unbalanced Load Coefficient
When using two or four chains in a suspension situation or the like,
the load applied to chains does not conform to an average value.
For this reason, the unbalanced load coefficient from the following
table is to be used to determine the load for each chain. W 1=W×αB
=3000×0.35
=1050（ kgf）
Table 5: Unbalanced Load Coefficient αB
INFORMATION
TECHNICAL

Suspensions Unbalanced load coefficient

2 0.60
W kg
4 0.35

65
TECHNICAL INFORMATION

Selection Formulae
Chain Length: L (no. of links) Chain Tensile Force for Rated
N 1+N 2
L=    +2・Cp+
2
（N 2−N 1 ） Output: F (kgf)
2 40・Cp 6120・kW
where Cp is the inter-shaft distance expressed as a pitch; F= v
N1 is the number of teeth on the small sprocket; and where kW is the rated output (kW) and
N2 is the number of teeth on the large sprocket. v is the chain speed (m/min).

Chain Speed: v (m/min) Corrected Transmission

v=
p・N・r Performance: kW' (kW)
1000 kW'=αu・kW
where p is the chain pitch (mm); where kW is the rated output (kW) and
N is the number of teeth on the sprocket; and (αu is the service coefficient (from Table 1 on page 65).
r is the sprocket speed (rpm).
CAUTION
The chain length L found using the formula presented here should
be rounded off to an integer. Note that an offset link will be
required when the chain length is an odd number; however, the
tooth numbers and inter-shaft distance should be adjusted
whenever possible to ensure that calculation produces an even
number.
Simple Selection Tables
Mode of Use
These tables allow you to select usable chains based on the small (2) The intersection of small-sprocket speed (horizontal axis) and
sprocket speed and the transmission performance (corrected). transmission performance (vertical axis) on the Simple Selection
Example: Selection based on a sprocket speed of 500 rpm and a Table for 15 gear teeth appears between No. 50 and No. 60;
transmission performance of 5 kW. accordingly, No. 60 is selected.
(1) Tentatively set the number of teeth on the small sprocket. Here, (3) Evaluate situations for other tooth numbers in the same way,
a value of N = 15 will be used. and select a suitable combination of tooth number and chain
specification.
Chain number Number
Multiplicity Speed coefficient
(No.) of teeth
CAUTION
60 15 1 Suitable Selection of chains from the right side of the triangular sections on
50 15 2 Not economic the Simple Selection Tables should be avoided whenever possible.

50 17 1 No reserve in terms
of performance

Standard Roller Chains

Number of teeth = 15
A,B C D (Refer to page 72 for the lubricated types.)
Triple Double
500
Chain number Pitch circle diameter Outer diameter
500 (No.) (mm) (mm)
D
500
0
25 30.54 34.00
.24
No 35 45.81 51.00
100 00
.2
No 80 0 40 61.08 67.00
100 .1 .16
50 No No
40 20 50 76.35 84.00
100 .1
Transmission performance (kW)

.1
No No
50 60 91.62 101.00
00 .8
0
.1
50 No No 80 122.17 135.00
. 60 100 152.71 168.00
No
10
0 120 183.25 202.00
.5
10 No
5
0
140 213.79 236.00
10 .4
No 160 244.33 269.00
5 5
.3
No
5 180 274.87 303.00
5
.2 200 305.42 337.00
A,B C No
1
240 366.50 404.00
1
0.5
1
0.5

0.5 0.2
20 50 100 500 1000 5000 10000

Small sprocket speed (rpm)

66
 ROLLER CHAINS
Number of teeth = 17
A,B C D

Triple Double
500
Chain number Pitch circle diameter Outer diameter
500 (No.) (mm) (mm)
D
500 0
.24 25 34.56 38.00
No

ROLLER CHAINS
DOUBLE PITCH
00 35 51.84 57.00
100 .2
No 80 0
.1 .16 40 69.12 76.00
100 No No
50 40 50 86.39 94.00
100 .1 20
Transmission performance (kW)

No .1
50 No 60 103.67 113.00
00
.1
50 No .8
0 80 138.23 151.00
No
100 172.79 189.00
10 . 60
No . 50 120 207.35 227.00

HOLLOW PIN CHAINS

No
10
5 .40 140 241.91 264.00
10 No
5 5 160 276.46 302.00
.3
No
5 180 311.02 340.00
5 200 345.58 378.00
A,B .2 C
1 No
240 414.70 453.00
1
0.5
1
0.5

CORROSION RESISTANT
0.5 0.2

ROLLER CHAINS
20 50 100 500 1000 5000 10000

Small sprocket speed (rpm)

Number of teeth = 19
A,B C D

LEAF CHAINS
Triple Double
500
Chain number Pitch circle diameter Outer diameter
500
D (No.) (mm) (mm)
40
500 .2
No 25 38.58 42.00

00 0
35 57.87 63.00
100 .2 .18
No No
0 40 77.16 84.00
60 .14
100 .1
50 No No
50 96.45 105.00
Transmission performance (kW)

100 20 00
.1 .1
50 No No 60 115.74 126.00
ATTACHMENT

8 0
50
No. 80 154.32 167.00
0
CHAINS

.6
No 100 192.90 209.00
10
. 50
No 120 231.48 251.00
10
5 . 40 140 270.06 293.00
10 No
5 160 308.64 335.00
. 35 180 324.12 358.00
5 No

A,B .2
5 200 385.79 419.00
C
1 No
INFORMATION

240 462.95 502.00

TECHNICAL

1
0.5
1
0.5

0.5 0.2
20 50 100 500 1000 5000 10000

Small sprocket speed (rpm)

67
TECHNICAL INFORMATION

Number of teeth = 21
A,B C D

Triple Double
500
Chain number Pitch circle diameter Outer diameter
500 (No.) (mm) (mm)
40 D
500 .2
No 25 42.61 46.00

00 0 35 63.91 69.00
100 .2 .18
No No
60 140 40 85.21 92.00
.1 .
100
50 No No
20
50 106.51 115.00
Transmission performance (kW)

100 .1 00
.1
No No 60 127.82 138.00
50

50 .80 80 170.42 184.00

No

0
100 213.03 230.00
10 .6 . 50
No No 120 255.63 276.00
10 0
4 140 298.24 322.00
5
N o.
10 5
.3
5 No 160 340.84 368.00
5 180 383.45 413.00
5 200 426.05 459.00
.2
1
A,B No C
240 511.26 551.00
1
0.5
1
0.5

0.5 0.2
20 50 100 500 1000 5000 10000
Small sprocket speed (rpm)

Number of teeth = 23
A,B C D

Triple Double
500
Chain number Pitch circle diameter Outer diameter
500 (No.) (mm) (mm)
40
500 .2
No 25 46.63 50.00
00 35 69.95 75.00
100 .2 180
No No.
60 40 40 93.27 100.00
.1 o.1
100 No N 20
50 .1 50 116.58 125.00
No 00
Transmission performance (kW)

100 .1
No
50 60 139.90 150.00
. 80
50 No 0
80 186.54 200.00
.6
No
100 233.17 250.00
0
10 .5
No 120 279.80 300.00
0
10 .4
5 No 140 326.44 350.00
5
.3
10 No
5 160 373.07 400.00
5 180 419.71 450.00
2 5
No. 200 466.34 500.00
A,B C D
1
240 559.61 600.00
1
0.5
1
0.5

0.5 0.2
20 50 100 500 1000 5000 10000
Small sprocket speed (rpm)

68
SUPER ROLLER CHAINS

ROLLER CHAINS
Number of teeth = 15
B C D (Refer to page 72 for the lubricated types.)

Triple Double
500 300 Chain number Pitch circle diameter Outer diameter
500
(No.) (mm) (mm)
80 122.17 135.00
40

ROLLER CHAINS
.2

DOUBLE PITCH
100 No 100 152.71 168.00
00
.2
No
100 120 183.25 202.00
50
100 60 140 213.79 236.00
.1 140
Transmission performance (kW)

50 No . 0
No .12 00 160 244.33 269.00
50 No o.1
N 0
.8 200 305.42 337.00
No
10 240 366.50 404.00

HOLLOW PIN CHAINS

10
5
10
5

B C D
1

1
0.5
1
0.5

CORROSION RESISTANT
0.5 0.2
5 10 50 100 500 1000

ROLLER CHAINS
Small sprocket speed (rpm)

Number of teeth = 17
(Refer to page 72 for the lubricated types.)

LEAF CHAINS
Triple Double

500 300 Chain number Pitch circle diameter Outer diameter

500 (No.) (mm) (mm)
40 80 138.23 151.00
.2 0
100 No . 20
No 100 172.79 189.00
160 140
o. .
100 N No 20 120 207.35 227.00
50
o .1 00
100 N .1
No 140 241.91 264.00
Transmission performance (kW)

0
50 .8
No
160 276.46 302.00
50
ATTACHMENT

200 345.58 378.00

CHAINS

10 240 414.70 453.00

10
5
10

5
5

B C D
1
INFORMATION

1
TECHNICAL

0.5
1
0.5

0.5 0.2
5 10 50 100 500 1000
Small sprocket speed (rpm)

69
 TECHNICAL INFORMATION

Number of teeth = 19
B C D (Refer to page 72 for the lubricated types.)

Triple Double

500 300 Chain number Pitch circle diameter Outer diameter

(No.) (mm) (mm)
500
40
.2 80 154.32 167.00
No 00
.2
100 No 60 100 192.90 209.00
.1
No 140
.
100 No .120 120 231.48 251.00
50
No
100 140 270.06 293.00
Transmission performance (kW)

50
00
o.
1 160 308.64 335.00
50 N
80
N o. 200 385.79 419.00
10 240 462.95 502.00
10
5
10
5

B C D
1

1
0.5
1
0.5
0.5 0.2
5 10 50 100 500 1000
Small sprocket speed (rpm)

Number of teeth = 21
B C D (Refer to page 72 for the lubricated types.)

Triple Double
500 300 Chain number Pitch circle diameter Outer diameter
500 (No.) (mm) (mm)
40 00
.2 .2 80 170.42 184.00
No No 60 40
.1 .1
100 No No 0 100 213.03 230.00
1 2
.
No 100
100 o . 120 255.63 276.00
50 N
0
100 .8 140 298.24 322.00
No
Transmission performance (kW)

50
160 340.84 368.00
50
200 426.05 459.00
10 240 511.26 551.00

10
5
10
5

B C D
1

1
0.5
1
0.5

0.5 0.2
5 10 50 100 500 1000
Small sprocket speed (rpm)

70
 TENSION AND SLACK
INSTALLATION AND ARRANGEMENT
Proper amount of chain tension

ROLLER CHAINS
To design excellent chain drives, Sprockets can be spaced at any should be maintained. Inade-
chains and sprockets should be distance as long as their teeth do quate tension will step up wear,
properly arranged and installed. not touch. 0ptimum distance is 30 while excessive sag will result in
to 50 times of pitch of the chain pulsating impact, stranding and
CENTER DISTANCE AND used except when there is a pul- breakage.
CHAIN LAP sating load. In case of pulsating Adequate slack is 4% of the span
Chain lap on the small sprocket drive, distance of less than 20 for normal drives. In the following
must be at least 120 degrees. chain pitches is adequate.

ROLLER CHAINS
cases, the slack should be about

DOUBLE PITCH
2% of the span.
1) Vertical position or near to vert-
ical position.
2) Center distance exceeding 1
Lap meter.
3) Heavy load application with

HOLLOW PIN CHAINS

frequent starts and stops.
4) Application with sudden re-
Center Distance
verse motions.

DRIVE POSITIONS
〈Horizontal〉 〈Inclined and Vertical〉

CORROSION RESISTANT
1
5 5

ROLLER CHAINS
shaft adjusted

2
up to 60ﾟdegrees

LEAF CHAINS
6

Over 60ﾟdegrees

Inclined arrangements
4 5 Inclined operation should be
ATTACHMENT

within 60゜ , possible.

CHAINS

6 Too much slack will cause chain

Horizontal arrangements
to ride up on the lower sprocket
1 G enerally roller chain slack is on
or come off. It should be adjusted
the lower side.
by a tightner.
2 W hen the center distance is short
chain slack is adjusted by ex- Vertical arrangements
panding it.
INFORMATION

7, 8
TECHNICAL

3 W hen the center distance is long, Excessive chain sag should be auto-
chain slack is adjusted by instal- matically adjusted by a tightner. It is
ling a tightner. mandatory when the driving
4 W hen chain slacks on the upper shaft(small sprocket) is placed on
7 8
side, adjust it by a tightner. the bottom side.

71
TECHNICAL INFORMATION

LUBRICATION POINTS OF LUBRICATION

Proper lubrication of roller chains is a very important factor in getting 1) Fill and change oil periodically.
their best possible performance and longer lifetime. No matter how 2) Generally, heavy oil and grease
well a transmission system is designed, if it is not properly lubricated, are not suitable as a lubricant.
its service life will be shortened. 3) Avoid mix of oil with another
Abrasion between the pin and bushing causes roller chains to stretch. kind or other maker's.
Therefore, these parts should be well lubricated. 4) Adequate lubrication quantity
The gap between the pin-link plate and roller-link plate on the slack is also essential for a chain's lon-
side of the chain should be filled with lubricant. ger service life.
The oil forms a film which minimizes wear of the pin and bushing thus
increasing the chain service life.
It also reduces noises and cools down the chain running at high speed.

TYPE Method Explanation

OIL
B R US H

A Manual Lubrication Regular application by bruch or spout can

OIL B ATH

B Dripping Lubrication Rapid drip(20 drops of oil per minute) using a lubricator

Disc Lubrication Lubrication by a disc fitted to the sprocket shaft

OIL LE VE L

Oil Bath Lubrication Part of the chain passes through oil provided in a sealed casing
OIL LE VE L

Oil provided in a leakproof casing is circulated by a pump to

D Forced Lubrication
provide forced-feed lubrication
OIL B ATH

Recomended Grade of Oil

Temperature[ﾟC ]
C hain -10 0 40 50 -10 0 40 50
No. ｜ ｜ ｜ ｜ ｜ ｜ ｜ ｜
0 40 50 60 0 40 50 60
Lubric ation Type TYPE A,B,C TYPE D
    ∼ 5 0 S AE 10 S AE 20 S AE 30 S AE 50 S AE 10 S AE 20 S AE 30 S AE 40
60 ∼ 80 20 30 40 50 10 20 30 40
100 20 30 40 50 20 30 40 50
120 ∼ 30 40 50 50 20 30 40 50

72
 WARNING

ROLLER CHAINS
If misselected, misinstalled and missafe-guard Chain will break and se-
rious injury or property damage can result.
Please read an instruction manual carefully before installation.

ROLLER CHAINS
DOUBLE PITCH
Roller Chain Application Information Offset Link
Please select the chain(compare with Techni- One-pitch offset links are very handy, pin and
cal Data)when you use. offset linkplates have to be slip-fitted.
If the chain abused through improper instal- It's allowable working load is approximate-

HOLLOW PIN CHAINS

lation, operating or maintenance procedures, ly 30% less.
failure can lead to personal injury or property Therefore one-pitch offset links are not rec-
damage. ommended especially frequent, impact load
demand high speed driving.

Ultimate Tensile Strength

Cotter Pin, Spring Clip
Ultimate tensile strength is the one time pull

CORROSION RESISTANT
required to break the chain therefore these Keep angle 90% approx. to spread out prongs

ROLLER CHAINS
are not the allowable working load. of cotter pin. Do not reuse the cotter and do
S a f e t y f a c t o r m u s t b e c o n s i d e r e d w h e n s e- n o t u s e t h e c o m m e r c i a l c o t t e r s o n t h e m a r-
lecting roller chain. ket.
A roller chain should never be loaded above Be sure to insert spring clip properly into and
50% of Ultimate strength for even one cycle. seat in the groove on the end to Pin after in-
When to use a multiple-strand roller chain, stallation of Connecting Link cover plate
please consider the multiple-strand factor. onto pins, and do not spring one leg of the
clip over the pin end to avoid breakdown of

LEAF CHAINS
the leg.
Do not spread out clip's legs too much to pre-
Guarding vent falling spring clip off and unexpected
The chain can break in normal service due to accident.
the effects of wear, fatigue or unexpected Install spring clips with solid end pointing in
overloads. Therefore a roller chain drive the direction of chain travel.
ATTACHMENT

should have adequate guarding to prevent

CHAINS

personal injury or property damage. Rust Corrosion

If a chain is corroded, its capacity is reduced.
If corrosion is severe, the link plates may
Connecting Link crack even though the chain is not under
When a slip-fit connecting link coverside for load.
ease of assembly is used, a chain's working In view this, carbon steel chain should not be
INFORMATION
TECHNICAL

capacity is reduced as much as 20% on some exposed to corrosive conditions, acid fumes,
models. SENQCIA offered New Connecting salt spray sea water.
Links with slip-fit coverside as strong as the Chain corrosion from normal atmospheric
base chain Recommend this New Connecting conditions may be minimized by proper lubri-
Link to use. cation.
73
TECHNICAL INFORMATION

CAUTION
1)Always lock out machinery power switch before attempting removal, installation, or any
servicing of chain.
2)Wear eye and face protection when grinding, driving, or disassembling pins.
3)Always wear gloves, protective clothing and safety shoes with steel toe when working with
chains.
4)Make absolutely sure that chain is properly supported to prevent uncontrolled movement of
chain and parts.
5)Chain pressers and breaking tools are recommended to be in good working order and to be
used according to instructions.
6)Avoid plating or welding assembled chains or components.
7)Never repair damaged chains by replacing only the component parts.
8)Damaged chain may be yielded and therefore should not be reworked.

Maintenance Check List

Inspect on regularly scheduled basis for worn, Excessive Noise
damaged or broken parts, possible interference Can be caused by broken links and chain rollers, extreme
by other systems components, and proper misalignment, elongation, chain jumping sprocket teeth, loose
lubrication. sprockets, broken teeth, accumulation of dirt packed into the
chain or sprockets teeth, interference by foreign objects,
Normal maintenance procedures can prevent contacting a fixed object.
most of the conditions described below. Check for worn broken or missing parts. Check alignment of
Carefully inspect roller chain drives on the same shafts and/or sprockets.
schedule as associated equipment.
Sprocket Misalignment Lubrication
On slow speed drives, where manual lubrication is used, if drip
Wear on the sides of sprocket teeth generally indicates lubrication is used check for adequate oil flow and proper
improper installation of sprockets and/or shafts. If shafts are out application to the chain.
of parallel or not in the same plane, non-symmetrical wear will With bath or pump lubrication, check oil level and add oil if
appear on sprockets or chain rollers. needed. Check oil for contaminationand change oil if needed.
After proper alignment is made retighten set screws in sprocket If pump lubrication is used, check each orifice to be sure if it is
hubs. clear and is directing oil onto the chain properly.

Chain wear and Elongation

Normal wear will cause some increase in chain length. However, Recommended Replacement
if a sudden increase in elongation occurs, look for severe wear Measure the chain wear elongation and if elongation exceeds
on the tips of sprocket teeth. This may be caused by any of the functional limits or is greater than 3%(0.36 inch in one
following: excessive loading or shock loading, displacement foo)replace the entire chain.
and/or wear in bearings, displacement of take-up, or under- Do not connect a new section of chain to a worn chain because
designed drives. it may run roughly and damage the drive. Do not continue to
Excessive elongation may be an indication that chain and/or run a chain worn beyond
sprockets should be replaced. 3% elongation because the chain will not engage the sprockets
Before replacing chain or sprockets, recalculateinitial drive properly and it may damage the sprockets.
design. Check chain tension if there is too much accumulated
slack in the drive.
Cutting Riveted Chain
Broken Chain Parts The two pins of a pin link must be driven out of the link plate.
Generally caused by an overloaded drive; extreme Strike the pins alternately to avoid distortion of the roller link
misalignment; excessive elongation plates as well as the plates of the adjacent links.
causing chain to jump sprocket teeth; heavy shock; Chain cutting tools can also be used. Follow their instruction
improper drive design geometry; foreign objects. carefully.
Recalculate initial drive design and make necessary correction.
Inspect sprockets and shafts for proper alignment or looseness.
Inserting New Links
Link Plate Wear Insert only on new roller chain. Pitch variance between a new
link and an old link, especially one which is elongated due to
Wear on inside of the link plates and on one side of sprocket
wear, will cause shock when the new link engages he sprockets.
teeth may be caused by a misalignment misalignment of
sprockets.
Realign sprockets and shafts. Inspect chain carefully, readjust Installing New Chain
chain properly or replace. Chain and/or related parts should be visually inspected for
damage, which could have occurred during shipping prior to
Removing Chain installation.
Turn the drive until a connecting link is fully engaged with one Never install new chain on worn sprockets as this will
of the sprockets so as to relieve the tension on the connecting permanently damage chain. With new chain and sprockets
pin. installed, check for proper and sprockets installed, check for
The connecting link may then be removed. proper tension and alignment.

74
SENQCIA CORPORATION http://www.senqcia.com/
Email:[email protected]
Head Office Shingu Building Shanghai Representative Office Rm 508, Block 10 1988 Gong He Xin Road,
4-2, Toyo 2-chome Jing’an District, Shanghai 200072
Koto-ku, Tokyo 135-8363 China
Japan Phone: (021)3387-0106
Phone: +81-3-3615-5421 Fax: (021)3387-0176
Fax: +81-3-3615-5934

SENQCIA MAXCO, LTD

1245 Kennestone Circle Marietta,
GA 30066, U. S. A
Phone: (770)424-9350
Fax: (770)424-9145

Published in December 2018

SQC-E-26-C/1812(TP)0.5