Download

From

material.vatsalvala.in
 IS : 1200 (Part 14) -1984
(Reaffirmed 2007)

Indian Standard
METHOD OF MEASUREMENT OF
BUILDING AND CIVIL ENGINEERING WORKS
PART 14 GLAZING

( Third Revision)
Fourth Reprint JUNE 2008
(Including Amendment No.1)

UDC 69.003.12 : 698.3

© Copyright 1985
BUREAU OF INDIAN STANDARDS
MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002

Gr 2 February 1985
 IS : 1200 ( Part 14 ) • 1984

Indian Standard
METHOD OF MEASUREMENT OF BUILDING
AND CIVIL ENGINEERING WORKS
PART 14 GLAZING

( Third Revision )
Method of Measurement of Works of Civil Engineering
( Excluding R\ver Valley Projects ), DDC 44
Chairman Representing
SJIRI A. C. PANCHDHARJ Central Vigilance Commission, New Delhi
Members
ADIiISIlASI ABAYANfA (PARSHIKSAN) Public Works Department, Lucknow
DEPUTY DIIH~( TOR ( CiAWl:SHAN ) ( Alternate )
SHRI B. G. AIIUJA Builders Association of India, Bombay
SHRI K. D. ARCOl Engineers India Limited, New Delhi
SURl T. V. SlT/\RAM ( Alternate)
SHIU N. K. ARORA Bhakra Management Board, Nangal Township,
Chadigarh
SURf R M. JOLt y ( Alternate)
SARI G. B. BAJAJ Bombay Port Trust» Bombay
SfllU P. BANEHJEE Ministry of Shipping and Transport (Roads
Wing)
SHill R. G. TPI.~WANI ( Alternate)
~HfU G. K. DESI-JPANDE Public Works Department, Bombay
DIRECTOR ( JRI ) Irrigation Department, Government of Uttar
Pradesh, Lucknow
DfRFCTOR (RAJFS ~NO COS1S ) Central Water Commission, New Delhi
DEPUTY DJr~EcrOR ( RATt.S
AND CoSTS) ( Alternate)
SURI P. N. GAOl Institution of Surveyors, New Delhi
SHRI D. S. TAtvlBANIC.AR ( Alternate)
SHRI P. S. HARI RAO Hindustan Construction Company Limlted,
Bombay
SHRI N. f\'t. DASTANE ( Alternate)
SURI G. B. JAHAGJllDAR The National Industrial Development Corpora..
tion Limited, New Delhi
( Continued on PQg~ 2 )

@ Copyright 1985
BUREAU ()F INDIAN STANDARDS
This publication is protected under the Indian Copyright Act (XIV or
1957) and
reproduction in whole or in part by any means except with written permission of the
publisher shall be deemed to be an infringement of copyright under the said Act.
IS : 1%00 ( Part 14 ) • 1984
( Contill ued from page 1 )
Members RepresentiIIg
JOINT DIRECTOR ( D ) National Buildings Organization. New DeIhl
SHRI A. K. LAL ( Alternate)
SHRI ASHIT RANJAN KAR Calcutta Port Trust, Calcutta
SHRI S. K. LARA Institution of Engineers ( India .~, Calcutta
SHRJ K. K. MADHOK MES Builders Association of India ( Regd ).
New Delhi
SHill R. K. BAHL (Alternate)
SHRI DATTA S. MAIJK Indian Institute of Architects, Bombay
PROF M. K. GOODOLE ( Alternate)
SHRI R. S. MURTHY Gammon India Limited, Bombay
SHRI H. D. MATANOE ( Alternate)
SHRI C. B. PATEL M. N. Dastur and Company Private Limited,
Calcutta
SHRI B. C. PATEL ( Alternate)
SHRI K. A. PATNAIK Bureau of Public Enterprises, New Delhi
SHRJ V. G. PATWARDHAN Ministry of Defence
SHRf C. G. KARMARKAR ( Alternate)
DR R. B. SINGH Banaras Hindu University, Banaras
SHRI R. A. SUBRAMANIAM Hindu-tan Steel Works Construction Limited,
Calcutta
SUPERINTENDING SURVEYOR OF Central Public Works Department, New Delhi
WORKS ( AVIATION)
SURVEYOR OF WORKS.I
( AVIATION) (Alternate)
SHRI G. RAM.\N, Director General. lSI ( Ex-officio Member )
Director ( crv Engg )

Secretarv
SHRI K M MATHUR
Senior Deputy Director (Civ [nai ), lSI

2
 IS : 1200 ( Part 14 ) • 1984

Indian Standard
METHOD OF MEASUREMENT OF BUILDING
AND CIVIL ENGINEERING WORKS
PART 14 GLAZING

( Third Revision)
o. F 0 J~ E \V 0 R D
0.1 This Indian Standard ( Part 14 ) ( 1 hird Reviv.on ) was adopted by the
Indian Standards Invtitution on 12 Decem bet 19~;..l, after the draft finalized
by the Method of Measurement of Works of CIvil Engineering ( Excluding
River Valley Projects) Sectional Committee had been approved by the Civil
Engineering Division Council.

0.2 Measurement occupies a very i mportant place in the planning and

execution of any civil engineering work from the time of f rst estimates to
the final cornpk non and settlement of payments of the project. The
methods followed for the measureme.it are not uniform, and considerable
differences exist between the practices follow, d hy one construction agency
and another and also between various Central and State Government
departments, While it is recognized that each system of measurement has
to be specifically related to the admitustrativc and financial organizations
within the department responsible for the work, a unification of the
various systems at the technical Jevel has been accepted as very desirable.
specially as it permits a wider circle of operation for civil engineering
contractors and eliminate ambiguities and misunderstandings arising out
of inadequate understanding of the various systems followed.

0.3 Among the various civil engineering items, measurement of building

had been the first to be taken up for standardization and a consolidated
standard ( IS : 1200 l~ having provisions relating to building works, ,vas first
published in 1958 and subsequently revised in 1964 and 1970.

0.4 In the course of usage of this standard by various construction

agencies in the country, several clarification- and suggestions for modifica-
tions were received and as a result of study, the Sectional Committee
responsible for the preparation of this standard decided that its scope,
besides being applicable to building, should be expanded so as also to
cover the method of measurement applicable to civil engineering works.
such as. industrial and river valley project works.
3
 IS : 1200 ( Part 14 ) • 1984

0.5 Since measurement of one type of trade is not related to that of

another one, and also to facilitate the second revision of IS : 1200 - 1964-
the Sectional Committee decided that each type of trade as given in IS~
1200-1964* be issued sc parau Iy as different parts. This will also be helpful
to the specific users in various trades in using the standard.

0.5.1 This part 14 covering glazing was, therefore, issued as a separate

standard for the first time in 197U and has now been revised in order
to kcv p the provisions in line with the latest practice.

0.6 For the purpose of dCCfU ng whether a particular requirement of this

standard is complied \\ ith the unal value, observed or calculated, express-
ing the result of a mcasu. erne nt, shalt he rounded ofT in accordance with
JS : 2-1960"t 1 he number of significant places retained in the rounded off
value shou'd be the same as that of the specified value in this standard.

I. SCOPE
1.1 This standard ( Part 14 ) covers the method of measurement of glazing
n buildings and civil engineering works.

2. GENERAL RULES
2.1 Clubbing of Items - Items may be clubbed together provided these are
on the basis of the detailed dcsc tion of items stated in this standard.

2.2 Booking of Dimensions - In booking dimensions, the order shall be

consistent and generally in the sequence of length, breadth or width and
eight or depth of thickness.

2.3 Description of Items -- 1 he description of each item shalt, unless

stated otherwise) be held to include, where neecessary, conveyance and
elivery, handling, loading, unloading, storing and waste.

2.4 Measurements - All works shall be measured net in decimal system, as

fixed in its place as given in 2.4.1 and 2.4.2.
2.4.1 Dimensions shall be measured to the nearest 0·01 m.

2.4.2 Areas shall be worked out to the nearest 0·01 nil.

2.5 Bills ofQu8ntities - The bills of quantities shall fully describe the

.Mcthod of measurement of building and civil engineering works (revised).

tRules for rounding orr numerical values ( revised ).

4
 IS : 1200 ( Part 14 ) - 1984

materials and workmanship, and accurately represent the work to be

executed.
2.6 The various kinds of sheets for glazing like glass and other materials
shall be described and shall be measured separately. In the cave of wired
glass design or pattern of reinforcement shall be described and in case of
frosted glass it shall be stated whether it is on one or both sides.

1.7 Work in wood, metal concrete and the like shall be measured
separately,

2.8 'The method of glazing shall be described and measured separately

under the following classification, The type and putty shall also be
described:

a) Front and back putty and sprigged or fixed with glazing pins,
b) Bedded in putty and fixed with beads. and
c) Bedded in rubber or velvet and fixed with beads (wherever
required).

3. i\1~l'HOD OF MEASUREMEN'f

3.1 Work shall be measured in square metres stating the thickness.

3.1.1 The dimensions of each pane shall be clear dimensions of opemng

pILlS width of rebates of structural member of window/door. The pane
other t han rectangular or sq uare shall be measured as the smallest rectan-
gular urea from which pane can be cut, Straight cutting ~h(tH br deLn:l.:l~
[0 be included in the item.

3.2 Circular cutting shall be measured as extra in running metres. The

term circular shall be deemed to include any form of curve.

3.3 Glass and sheet louvres shall be described and enumerated.

3.4 Hacking-out old broken glass and preparing for new glass shall be
measured in square metres.

J.S Holes drilled in work shall be enumerated stating diameter of the hole.
type and thickness of the glass/sheet and size of the pane.

3.6 Grinding, polishing and rounding off edges of glass or glazing sheet
shall be described and measured in running rnctres.

5
 BUREAU OF INDIAN STANDARDS
Headquarters:
Manak Bhavan, 9 Bahadur Shah Zafar Marg, NEW DELHI 110002
Telephones 23230131,23233375,23239402 Fax 91+01123239399,23239382
E • Mall lnfo@ brs org In website http //W'N'N brs org In

Central Laboratory: Telephone

Plot No 20/9, Site IV, Sarubabad Industnal Area, SAHIBABAD 201010 277 0032
Regional Offices:
Central Manak Bhavan, 9 Bahadur Shah Zafar Marg, NEW DELHI11 0002 23237617
'Eastern 1/14CIT SchemeVIl M, V I P Road, Kankurgachl, KOLKATA 700054 23378662
Northern SCQ 335-336, Sector 34-A, CHANDIGARH 160022 2609285
Southern CIT Campus, IV Cross Road, CHENNAI600113 22541984
tWestern Manakalaya, t9, MIDC, Behind MarolTelephone Exchange, 28329295
Andhen (East), MUMBAI 400093

Branch Offices:
'Pushpak', Nurmohamed Shaikh Marg, Khanpur, AHMEDABAD 380001 5601348
Peenya Industnal Area, 1st Stage, Bangalore-Tumkur Road, BANGALORE 8394955
Cornrnercral-cum-Offtcs Complex, Opp Dushera Maidan, Arera Colony, 2423452
Bittan Market, BHOPAL 462016
62-63, Ganga Nagar, Unit VI, BHUBANESHWAR 751001 2403139
5 th Floor, Koval Towers, 44 Bala Sundaram Road, COIMBATORE 641018 221 0141
SCO 21, Sector 12, Fandabad 121007 2292175
Savrtn Complex, 116 G T Road, GHAZIABAD 201001 2861498
53/5 Ward No 29, R G Barua Road, 5th By-lane, Apurba Sinha Path, 2456508
GUWAHATI781003
5-8-56C, L N Gupta Marg, Nampally Station Road, HYDERABAD 500001 23201084
Pnthav: Raj Road, Oppostte Bharat Overseas Bank, C-Scheme, JAIPUR 302001 2223282
11/418 B, Sarvodaya Nagar, KANPUR 208005 2233012
Sethi Bhawan, 2nd Floor, Behind Leela Cinema, Naval Kishore Road, 261 8923
LUCKNOW 226001
H No 15, Sector-3, PARWANOO, Oistt Solan (H P) 173220 235436
Plot No A·20-21, tnstrtunonal Area, Sector 62, Goutam Budh Nagar, NOt DA 201307 2402206
Patltputra Industrial Estate, PATNA 800013 2262808
Plot Nos 657-660, MarketYard, Gultkdl, PUNE 411037 24274804
"Sahaianand Housel! 3,d Floor, Bhaktmacar Circle, 80 Feet Road, 2378251
RAJKOT 360002
T C No 2/275 (1 &2), Near Food Corporanon of IndIa, Kesavadasapuram-Ulloor Road,
Kesavadasapuram, THIAUVANANTHAPURAM 695004 2557914
1't Floor, Udyog Bhavan, VUDA, Smpurarn Junction, VISHAKHAPATNAM-03 271 2833

·Sales OffIce IS at 5 Chowrtnghee Approach, PO Pnncep Street, KOLKATA 700072 23553243

tSales OffIce (WRO) Plot No E-9, MIDC, Ad No 8, Behmd Telephone Exchange,
Andhen (East), Mumbal-400 0093 28329295

Printed b) the Manager. Govt of India Pre-s. Fandabad