Scribd
Upload
260 views

K10 Keyboard User Manual

The document provides information about the Keychron K10 Bluetooth Mechanical Keyboard including what is included in the box, quick start guide instructions for Mac/Windows users, specifications, Bluetooth pairing and connection instructions, charging instructions, and backlight settings.

Uploaded by

rafael
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
260 views

K10 Keyboard User Manual

The document provides information about the Keychron K10 Bluetooth Mechanical Keyboard including what is included in the box, quick start guide instructions for Mac/Windows users, specifications, Bluetooth pairing and connection instructions, charging instructions, and backlight settings.

Uploaded by

rafael
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 30

K10 Bluetooth Mechanical Keyboard

IN THE BOX:
Keychron K10 Bluetooth Mechanical Keyboard x 1
Type-C Cable * 1
Manual * 1
Quick Start Guide * 1
Extra Keycaps Set * 1

2
Quick Start Guide
If you are a Windows user, please find the appropriate keycaps in the box,
then follow the instructions below to find and replace the following keycaps.

Mac / Windows

3
4
5
6
7
K10 BLUETOOTH MECHANICAL KEYBOARD SPECIFICATIONS
Number of keys: 104
Switch type: Mechanical / Optical Switch
Battery: 4000mAh
Working time: Around 70 hours with the backlight on.
Charging time: Around 3 hours
Charging port: USB Type-C
Mode: Bluetooth/Wired
Bluetooth operating distance: Within 10 meters (open space)
Name of Bluetooth device: Keychron K10

Operating Environment: -10 to 50°c


Technical specifications can be subjected to change without notice we apologize for any
inconvenience caused

8
9
10
Backlit will be turned on.

BLUETOOTH MODE
1. Switch the keyboard to Bluetooth option.
2. Backlit will be turned on.
3. Hold "Fn+1" key for 4 seconds to activate Bluetooth pairing (the Bluetooth indicator fast flashes
for 3 minutes to detect pairing.
4. Search for the Bluetooth device "Keychron K10" on your device and connect it (the Bluetooth
indicator goes off after successful pairing).
Note: This keyboard supports pairing up to 3 devices simultaneously via combination key
“fn” + “1” / “fn” + “2” / “fn” + “3”.
*The Bluetooth indicator will continue to flash for 3 minutes.
**Slow or failed connections may exist due to different Bluetooth versions, please make sure all the
settings are correct.

11
“fn” + “1” / “fn” + “2” / “fn” + “3”

RECONNECT:

TURN OFF THE KEYBOARD

Under Bluetooth mode, the keyboard backlight turns off when it is inactive for 10 minutes. Tap any
button to wake the keyboard. If want to disable this auto battery save mode, press fn+S+O for 4
seconds. Then if want to enter this power save mode again, press fn+S+O for 4 seconds.

12
13
confirm

connection

connections

Settings
find

14
15
16
K10 蓝牙机械键盘
Keychron K10 蓝牙机械键盘

赠送键帽套装 x 1

快速上手指南 x 1

18
快速上手指南
如果你是 Windows 用户，请在包装盒里找到如下的键帽，用拔键器拔下键盘
上的对应键帽并且更换。

Mac / Windows

19
20
21
22
23
24
25
将电线插入USB端口，将另一端口插入键盘的端口
充电指示灯: 电池电量低于15%，红色电池指示灯快速闪烁; 充电时，红色电池指示灯常亮; 在约3小时内完全充电，
指示灯绿色长亮。
* Keychron K10键盘与所有USB端口兼容。要获得最佳信号和最快充电时间，建议采用USB3.0端口或5V-2A电源适配器。
* Keychron K10可在蓝牙／开／关模式下充电。
* 有线模式下，充电指示灯不会熄灭。
* 本产品最高支持5V充电电压，和2A充电电流。因不当充电而产生的问题，我们概不负责。

可切换背光效果。

短按fn+左方向键或fn+右方向键可调节背光颜色（仅适用于RGB版本）。

键盘背光灯将打开。

26
键盘背光灯将打开。
长按 “fn+1” 4
10
“fn+1”/“fn+2”/“fn+3”

“fn+1”/“fn+2”/“fn+3”

蓝牙状态下，键盘无操作10分钟后自动进入睡眠模式，背光熄灭，点击任意键即可唤醒键盘。当电量低于15%，电源指示闪烁
红色，请及时充电。

请将键盘左侧系统开关拨至Mac/iOS。

27
请将键盘左侧系统开关拨至Win/Android。

28
29
30

You might also like