1 2 3 4 5 6 7 8 9 10 11 12

REVISION DESCRIPTION OF MODIFICATION POSITION NAME DATE

1 CHANGED HUB LENGHT AND INCLUDED MATERIAL ITEMS IN THE B.O.M. C5, C6, C8, ALEXANDRE 03/11/2021
E12

2 INDICATED FASTERN TREATMENT SURFACE D1 ALEXANDRE 19/11/2021

2 6.1 6.2 6.3 1
7 8 3 3 COMPLETE PROJECT. ATTENDED CUSTOMER COMMENTS D3, E11 ALEXANDRE 26/11/2021
A A

,2
+0
0
A B 25

28
6,4 H7 +0
11

H7
,
0 021

+0
0
,0

0 2
21

,
0

+0
R0,6 -0,2 (2x)

,4
97
C C
B 0 B

275
185

185

275
R0,6 -0,2
(2x)

Gagging Bush
+0,022 A B
110 H6 0 See note +0,022
92 H6 0
C C
SECTION A A SECTION B B
(UPPER) 170 1 350 140 1
MOTOR SIDE (LOWER)
PUMP SIDE
660 1

145 1 25 4 10 9 5.4 5.5 5.1 5.2 5.3 5.1

General notes:
LIFTING HOLES
1. Treatment surface. 2 (2X M16)
17,5
- Metallic parts (hubs, spacer and retainer plate):
D The surface finishing is special ink, apropriate for a environment
D
according to ISO 12944-9/C5 H, high durability
(15 to 25 years). 3
1) Primer coat
Brand name = Sigmazinc 68SP
Maker = PPG
N° of coatings = 1 coat (60µm)
2) Intermediate coat

130
80

Brand name = Sigmafast 278 ISOMETRIC VIEW

Maker = PPG 10
N° of coatings = 1 coat (150µm)
E 3) Finishing coat
E
Brand name = Sigmadur 550H
Maker = PPG 1
3
N° of coatings = 1 coat (50µm)
DFT = 260µm 10 2 WASHER - DIN 7089 - 14 300HV - GEOMET 500 GRADE B 1.001.437 CARBON STEEL

Colour = RAL 7035 (light grey) 2x M12 9 2 SOCKET HEAD SCREW M12x30 - DIN 912 - 12.9 - GEOMET 500
GRADE B 1.050.707 CARBON STEEL

- Fasteners (bolts, nuts, washer and rings): 8 6 HEX HEAD SCREW M8x60 - DIN931 8.8 - GEOMET 500 GRADE B 1.053.898 CARBON STEEL

Surface treatment with GEOMET 500 GRADE B. 7 6 GAGGING SLEEVE DNZ G 0420 2.262.030 8.002.835 SAE 1045
6.3 6 SPACER WASHER DNZ G 0420 - GEOMET 500 GRADE B 2.263.119 8.002.074 SAE 4140
- Disk Membrane:
Stainless steel: Without treatment surface 660 6.2 6 DRIVE SLEEVE DNZ G 0420 - GEOMET 500 GRADE B 2.258.121 8.002.074 SAE 4140
6.1 19 DISC MEMBRANE TYPE DNZ 0618 2.254.029 6.405.264 AISI 301 TEMPER-
ROLLED

F 2. All fasteners must be tighttened according to the torque values

SECTION C C 6 2 FLEXIBLE ELEMENT DNZ G 0618 3.800.233
F
5.5 1 WASHER A17 DIN 125 - GEOMET 500 GRADE B 1.001.438 CARBON STEEL
given on the drawing and in the technical manuals. 5.4 1 HEX LOCK NUT M16 DIN 980 CLASS 10 - GEOMET 500 GRADE B 1.065.434 CARBON STEEL
5.3 1 WASHER A21 - DIN 125 - GEOMET 500 GRADE B 1.001.436 CARBON STEEL

3. Alignment condition at installation: maximum misalignment limits 5.2 1 OVERLOAD COLLAR DNZ G 0420 - GEOMET 500 GRADE B 2.259.082 8.002.179 SAE 1045
5.1 1 SHOULDER BOLT (20F9 X M16 X 60) - ISO7379 - 12.9 - GEOMET 1.050.708 CARBON STEEL
must be adheared to these values cannot exceed 10% of the 500 GRADE B
5 12 FIXING KIT DNZ G 0420 - GEOMET 500 GRADE B 3.801.029
values indicated for the equipment operation rate.
4 1 RETAINER PLATE DNZ-G-0618 2.208.156 8.002.156 SAE 1020
3 1 VULKAN DISCFLEX HUB DNZ G 0618 2.256.654 8.002.452 SAE 1045
4. Recommended spare parts: coupling flexible elements 2 1 VULKAN DISCFLEX HUB DNZ G 0618 2.256.653 8.002.452 SAE 1045
(3.800.233) and fastener set (3.801.029). 1 1 SPACER DNZ-G-0618-0350 2.255.651 8.002.452 SAE 1045
ITEM QUANT. DENOMINATION / DIMENSIONS / STANDARD CODE MAT. CODE MATERIAL SUPPLIER CODE

5. At any hypothesis the coupling should be installed or operated MEASURE WITHOUT TOLERANCE
SURFACE FINISH - NBR 8404 - Ra P m: LIBERATION:
G with the gagging bushings still positioned. FOR LINEAR DIMENSIONS G
ACCORDING TO NBR 2768-1
VERY
MM MEDIAN GROSS GROSS
6. To avoid damage to the flexible elements the coupling should not Technical Data 2000
1000
±1,2
±0,8
±3,0
±2,0
±6,0
±4,0
VULKAN CODE:
MATERIAL:
be left unsupported in such a way that the hubs or flanges are 400
Coupling Rating 1,150 kW/RPM ±0,5 ±1,2 ±2,5 DIMENSION:
hanging free causing a large deflection in the flexible elments. Tightening Torque Coupling Nominal Torque 10975 N*m
120 ±0,3 ±0,8 ±1,5 HEAT TREATMENT:
This needs to be observed even when the retaing bushings are 30 ±0,2 ±0,5 ±1,0
DEPTH:
locked Ref Torque Unit Coupling Peak Torque 21950 N*m 6 ±0,1 ±0,3 ±0,5
HARDNESS:
DIM. MACHIN. RAW WELDED
Maximum Speed - Unbalanced 3700 RPM UNTIL TOLERANCE SURFACE TREATMENT:

7. For more details about operation, installation and maintenance, 5.1 360 Nm Maximum Speed - Balanced 6000 RPM DRAWN APPROVED CUSTOMER / P.V.: VULKAN FAR EAST
NAME: ALEXANDRE CELSO ZEM
see the product manual. Moment of Inertia 0,675 kg*m2 DATE: 27/10/2021 27/10/2021
DENOMINATION:

Maximum Radial Misalignment 2,86 mm SIGN: DISCFLEX MEMBRANE COUPLING DNZ G 0618 0350
H 8. Item no: P-546A/B Important!!
A-DNZ-G-0618/350-110H6-170-D1H7-92H6-140-D1H7-PE H
Maximum Axial Misalignment 3,7 mm
Item name: Alternate Seawater Pump Maximum Angular Misalignment 0.5 Degree 1:3
5.9.924.082 3
SCALE: DRAWING CODE: REV.:
The tight on the drive bolts shall be applied only in
Maximum Operate Temperaute 150 ºC 85.14
9. Coupling manufactured within a run-out of 0,025 in the radius the coupling instalation on client equipment. WEIGHT(kg):

and 0,026mm face to face.

Balancing Grade
Balancing Standard
G6,3 AT 890 RPM
ISO 1940-1
THIS IS VULKAN DRIVE TECH PROPERTY DOCUMENT, SO IT CAN'T BE COPIED,
REPRODUCED OR COMMUNICATED TO THE OTHERS WITHOUT OUR PREVIOUS
WRITTEN PERMISSION.
REPLACED BY:

REPLACE: A2
1 2 3 4 5 6 7 8 9 10 11 12