T E C H N I C A L D A T A

REPCON® V/O
Single component polymer-modified concrete repair mortar with corrosion inhibitor
Finishing/Curing: Finish the repair material to the
DESCRIPTION desired texture to match the surrounding concrete. REP-
REPCON® V/O is a single component, polymer modified, CON® V/O is self-curing under most conditions. In severe
fiber reinforced concrete repair mortar with integral corro- drying conditions, use an ASTM C-309 compliant, water
sion inhibitor for use in a variety of vertical and overhead based SpecChem curing compound.
repair applications. REPCON® V/O incorporates the latest
in polymer technology offering superior durability, perfor- PACKAGING
mance and ease of application in industrial, commercial,
and infrastructure (D.O.T.) applications. 50 lb bag (also available in a 50 lb plastic pail)
Yield per 50 lb unit = .43 cu-ft
FEATURES/BENEFITS
CLEAN UP
 One component dry polymer-modified, just add water
 Dry polymer technology for excellent freeze thaw du- Tools and equipment may be cleaned with water before
rability REPCON® V/O hardens.
 Hand-applied or spray applied for large projects
 Easy to apply/finish consistency up to 2” TYPICAL TEST DATA
 Concrete-gray in color
 Designed for vertical and overhead repairs Set Time at 70oF (ASTM C-266)
 Fiber-reinforced for added strength
 Contains integral corrosion inhibitor Initial Set 50 min
Final Set 90 min
APPLICATION
Compressive Strength (ASTM C-109)
Surface Preparation: The concrete must be sound
and free of all foreign material, including oil, grease, dust, 1 day 3650 psi
laitance or other surface contaminants. Mechanically 7 days 5470 psi
abrade the surface by an engineered approved method,
such as grinding, abrasive blasting, or scarifying. All sur- 28 days 7450 psi
faces to be repaired should be in a saturated-surface-dry
(SSD) condition with no standing water on the surface. Bond Strength (ASTM C-882)
14 days 1890 psi
Mixing: Mix 6.25 – 6.75 pints (depending on desired
consistency) of clean water per 50 pound bag of ma- Flexural Strength (ASTM C-348)
terial. Mix with a low speed drill. Add recommended 7 days 650 psi
amount of clean water into the container, followed by the
REPCON® V/O. Mix 2 to 3 minutes. Mix only what can be 28 days 1210 psi
applied within the setting period.
Length Change (ASTM C-157)
Bond/Scrub Coat: Use the properly mixed REPCON® Wet Cure @ 28 days +.01%
V/O as a bond or scrub coat by scrubbing a thin layer into
the pre-dampened substrate with a stiff brush. Place the Air Cure @ 28 days -.06%
REPCON® V/O mortar immediately before the bond coat Freeze-Thaw (ASTM C 666 Procedure A)
dries.
Relative Durability Factor @ 28 days = 95.7
Placement: Trowel REPCON® V/O firmly into the pre-
Rapid Chloride Permeability (ASTM C 1202)
pared area, ensuring intimate contact with the bonding
surface. Use slightly more material than is needed and 28 days 3420 coulombs
roughly shape during placement. After the initial set,
when REPCON® V/O is surface hard, shave the material
to the desired final shape using a steel trowel. Maximum
depth of neat repair mortar is 2” for each lift. Additional
lifts can be placed after the original lift has achieved set.
The original lift should be left with a rough surface to im-
prove bond between lifts.
1511 Baltimore Ave, Suite 600
Kansas City, MO 64108
www.specchemllc.com 866.791.8700
Revised 2/2/15
 SHELF LIFE
Shelf life of unopened bags stored in a dry facility is 12
months. Excessive temperature differential and/or high
humidity can shorten the shelf life expectancy. Store in a
cool, dry area away from direct sunlight.

LIMITATIONS/PRECAUTIONS
Minimum thickness for vertical/overhead repair is 1/8”. Do
not retemper after initial mixing. Do not add other ce-
ments, or additives to this product. REPCON® V/O is a
fast setting product, so mixing equipment should be
cleaned with water as soon as possible.

Do not allow repairs to freeze until the material has

reached a minimum of 1000 psi compressive strength.
In adverse temperatures, follow ACI recommendations
for hot/cold weather concreting practices.
Use only potable water for mixing.
Minimum surface and ambient temperature of 45oF and
rising is required at the time of application.
For optimum results, condition material to between 65 oF
and 85oF.

Caution: Contains Portland Cement and sand. Ce-

ment will cause irritation. Avoid contact. A dust respira-
tor, safety goggles, and rubber gloves are recommended.
Avoid prolonged contact with clothing. In case of contact
with eyes, immediately flush with water for at least 15
minutes. Get prompt medical attention. Do not wear con-
tact lenses when working with this product. DO NOT
take internally. Keep out of reach of children.
Avoid hazards by following all precautions found in the
Material Safety Data Sheet (MSDS), product labels, and
technical literature. Please read this information prior to
using the product.

DO NOT EXPOSE TO OR APPLY NEAR FIRE OR

FLAMES. FOR WELL VENTILATED OR EXTERIOR USE
ONLY!

WARRANTY
NOTICE-READ CAREFULLY
CONDITIONS OF SALE
SpecChem offers this product for sale subject to and limited by the warranty which
may only be varied by written agreement of a duly authorized corporate officer of
SpecChem. No other representative of or for SpecChem is authorized to grant any
warranty or to waive limitation of liability set forth below.
WARRANTY LIMITATION
SpecChem warrants this product to be free of manufacturing defects. If the product
when purchased was defective and was within use period indicated on container or
carton, when used, SpecChem will replace the defective product with new product
without charge to the purchaser. SpecChem makes no other warranty, either ex-
pressed or implied, concerning this product. There is no warranty of merchantability.
NO CLAIM OF ANY KIND SHALL BE GREATER THAN THE PURCHASE
PRICE OF THE PRODUCT IN RESPECT OF WHICH DAMAGES ARE
CLAIMED.
INHERENT RISK
Purchaser assumes all risk associated with the use or application of the product.

1511 Baltimore Ave, Suite 600

Kansas City, MO 64108
www.specchemllc.com 866.791.8700