Name: Deiandre Rodgers Date:

11/30/21

Student Exploration: Weathering

Vocabulary: abrasion, chemical weathering, clay formation, climate, dissolving, frost wedging,
granite, limestone, mechanical weathering, rusting, sandstone, shale, weathering

Prior Knowledge Questions (Do these BEFORE using

the Gizmo.)
Compare the two pictures at right. Both pictures show the
same kind of rock, granite.

1. Which rock do you think has been exposed on Earth’s

surface longer? B

2. Why do you think so? Because it is rounded with worn

edges, and the texture is smooth.

Gizmo Warm-up
When rocks are exposed on Earth’s surface, they are
gradually broken down into soil by the actions of rain, ice,
wind, and living organisms. This process is called
weathering. In the Weathering Gizmo, you will explore
how weathering takes place.

To begin, select the SIMULATION tab. Notice the selected

Rock type is Granite, a hard, dense rock.

2019
1. Click Play ( ). Wait for about 5,000 simulated years, and click Pause ( ). What do you

notice? Very little

2. Click Fastplay ( ). Wait for about 50,000 simulated years. What do you notice? Very little

3. Based on your observations, is weathering a fast or slow process? The process is a slow
process.
Activity A: Get the Gizmo ready:
Types of  Select the ANIMATION tab. Check that Frost
weathering wedging is selected.

Introduction: Mechanical weathering occurs when rocks are physically broken or worn down.
Chemical weathering occurs when the minerals in the rock are changed by chemical reactions.

Question: What are the most common ways in which weathering occurs?

1. Observe: Read the text about frost wedging, then click Play.

A. In the process of frost wedging, how does ice cause cracks in rocks to become

larger? When water freezes into ice it expands and crack rocks.

B. Is frost wedging more important in a warm or a cold climate? Cold climate

2. Observe: Read about and look at the animations for the other major types of weathering:
Abrasion, Pressure release, Dissolving, Clay formation, and Rusting.

A. What are three different ways that rocks can be worn down by abrasion? Sand
carried by wind, sediment carried by water small rock and stone dragged by
glaciers.

2019
 B. How can a large block of granite form layers like an onion?

When Granite is exposed at the surface, it is under much less pressure than where it
was when it formed deep beneath the Earth. This pressure release allows the rock to
expand, causing it to crack and flake off in layers.

C. What type of rock is affected by dissolving, and what features result? Limestone
forms underground like caves and streams etc, but only when rain and mixes with
Carbon dioxide.

D. How does clay formation affect a rock? Clay absorbs water and can expand when
cold.

E. Which part of a rock will undergo rusting? Iron in rust oxidizes.

3. Fill in: Scientists use the terms “oxidation,” “carbonation,” “hydrolysis,” and “exfoliation” for
different types of weathering. Fill in each blank with the appropriate term.

Pressure release: Exfoliation Dissolution: Carbonation

Clay formation: Hydrolysis Rusting: Oxidation

(Activity A continued on next page)

2019
Activity A (continued from previous page)

4. Observe: Select Other. Read the descriptions of each type of weathering, then match each
to its description below:

B Salt weathering A. Weathering from chemicals produced

by colonies of algae and fungi.
C Heat expansion B. Weathering that occurs when crystals
grow.
D Root weathering C. Weathering caused by the growth of
trees.
A Lichen growth D. Weathering common in desert
climates.

5. Categorize: List all of the types of mechanical weathering you have learned about in the left
column of the table, and all of the types of chemical weathering you have read about in the
right column.

Mechanical weathering Chemical weathering

Frost Wedging – water freezing in Algae and Lichen, Moss – create
the rock chemicals the break the rock
Root Wedging Abrasion – wind, Dissolving –
water and ice (glaciers) pushing Carbonation – Limestone caves
particles against the rock. Clay formation – hydrolysis Rust
Salt wedging – salt dries and – Iron in the rocks
forms crystals, forcing rock apart Oxidizes (rusts)
Pressure Release (Exfoliation)

6. Interpret: Based on the descriptions and images, guess which type of weathering is shown
by each of the images below. Explain each answer.

2019
“Honeycomb” rocks in Spain Stalactites in South Dakota Split rock in Scotland

Salt (Mechanical Dissolving (Chemical) Frost wedging ( Mechanical)

2019
 Get the Gizmo ready:
Activity B:
 On the Simulation tab, click Reset ( ).
Weathering of
 Set the Average temperature to 25 °C and
different rocks
Precipitation to 250 cm/yr.

Introduction: The Weathering Gizmo lets you explore weathering of four common rocks.
Granite is a very hard rock formed from the crystallization of magma deep underground.
Sandstone forms when sand grains become cemented together. Limestone is formed from
ancient corals, shells and skeletons. Shale is formed from compacted mud.

Question: How does weathering affect different rock types?

1. Observe: Below Rock type, select Granite. Click Fastplay and run a simulation of about
100,000 years. Click the Tools palette and select Screen shot ( ). Right-click the image,
click Copy, and then paste the image into a blank document. Label this image “Granite.”
(When you are done, print out and turn in this document with this sheet.)

Describe what you see: Seeing cracks around the rock and trees growing on the top of the
rock.

Look at Weathered rock above the outcrop. How much rock was weathered? 5,000

2. Observe: Click Reset ( ). Repeat the same procedure for Sandstone, Limestone, and
Shale. After 50,000 years, take an image of each, and describe your observations below.
List the amount of weathered rock for each type of rock.

Sandstone: Trees growing everywhere around the rock faster than granite.

Weathered rock: 12,000

Limestone: Sinkhole being created cracks and trees came at the same time time.

Weathered rock: 9,000

Shale: Automatically everything starts to sink and crack.

Weathered rock: 6,000

2019
3. Compare: Compare the results of weathering of different landscapes:

A. Which rock types tend to weather into rounded shapes? Sandstone

B. Which rock weathers into caves and lumpy hills? Limestone

C. Which rock weathers most quickly? shale Most slowly? Granite

(Activity B continued on next page)

2019
Activity B (continued from previous page)

4. Observe: Click Reset. Select Granite and click Fastplay. Run the simulation until you can
see large cracks forming in the rock. (This may take a while, be patient!) Take a snapshot of
the resulting outcrop and add it to your document. Label this image “Granite cracks.”

What type of weathering forms these cracks? Granite

(Hint: You may need to review the different types of weathering on the ANIMATION tab.)

5. Infer: Some types of weathering only affect certain kinds of rocks. The Types of weathering
that apply to each kind of rock are listed above the outcrop. If a type of weathering does not
affect the selected rock, it is faded.

Select each rock and list the types of weathering that affect it.

Granite: Frost wedging Clay of formation

Sandstone*: Frost wedging Clay of formation

Limestone: Frost wedging and Dissolving

Shale: Frost wedging Clay of formation

*Note: Sandstones are only affected by clay formation when they contain minerals other
than quartz. Sandstones that are pure quartz do not form any clay.

6. Challenge: Based on the weathering patterns, guess the rock type shown in each photo.

limestone Granite

2019
Sandstone Shale

2019
 Get the Gizmo ready:
Activity C:
 On the Simulation tab, select Sandstone.
Weathering rates  Check that Frost wedging, Clay formation, and
Other are all selected.

Introduction: The most important things that determines how quickly a particular rock type
weathers is the climate, or typical weather conditions. Rocks in cool and dry climates weather
much differently than rocks in hot and rainy climates.

Question: How does the climate and rock type affect how quickly a rock weathers?

1. Predict: In each “Climate type” box, circle the condition you think will lead to the fastest
weathering for the given weathering type.
Weathering type Climate type
Frost wedging Hot or Cold Wet or Dry
Clay formation Hot or Cold Wet or Dry
Dissolving Hot or Cold Wet or Dry

2. Experiment: Click Return to original settings. Using the Gizmo, test the effect of
precipitation on the rate of weathering by measuring the amount of weathered sandstone in
20,000 years with low and high precipitation. Be sure to keep all the other variables the
same. Describe your results below.

Weathered rock (low precip.) 682 Weathered rock (high precip.) 150

How does the amount of precipitation affect the amount of weathering? Because of the
weathering it goes off how low or high to see if the years and weathering go slow or fast.

3. Experiment: Click Reset and Return to original settings. Now test the effect of
temperature on weathering rates. Describe your results below.

Weathered rock (low temp.) 585 Weathered rock (high temp.) 2,000

How does the temperature affect the amount of weathering? Because it’s a higher
temperature.

2019
4. Explain: Why do you think the rate of weathering tends to increase at hotter temperatures

and higher amounts of rainfall? Because high temperatures and greater rainfall

increase the rate of chemical weathering.

(Activity C continued on next page)

2019
Activity C (continued from previous page)

5. Experiment: Click Return to original settings and select Limestone. Turn off Frost
wedging and Other so that only Dissolving is selected. Using the Gizmo, test the effect of
precipitation and temperature on the rate of dissolving.

Dissolved rock (low precip.) Dissolved rock (high precip.)

Dissolved rock (low temp.) Dissolved rock (high temp.)

Summarize your findings:

Dissolving occurs more quickly at low temperatures because cold water can dissolve more
carbon dioxide than warm water. The greater the amount of dissolved carbon dioxide, the
more acidic the water is and the faster the rate of dissolving.

6. Experiment: Click Return to original settings and select Shale. Test the effects of
temperature on frost wedging and clay formation. Summarize your findings below. (Hint: Be
sure to test just one type of weathering at a time.)

Effect of temperature on frost wedging:

Effect of temperature on clay formation:

7. Summarize: The chart to the

right summarizes different
Hot
Temperature

combinations of temperature
and precipitation.

Based on what you have

Cool

learned in this lesson, write

the name of each weathering
type listed below into the box
Dry Wet

Precipitation
2019
on the chart where it would
happen most quickly.

Frost wedging
Clay formation
Dissolving

2019