Scribd
Upload
78 views

Week3 Assignment Solution

The document contains 10 multiple choice questions related to laser properties and calculations. Question 3 asks to calculate the radius of a laser beam waist given the wavelength and convergence angle, and the answer is 0.965 μm. Question 4 asks to calculate the mode spacing of a laser cavity given the length, and the answer is 1.5 GHz. Question 6 asks to calculate the Q-factor of a laser given the wavelength and linewidth, and the answer is 444.6 x 103.

Uploaded by

Usi Kuntal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
78 views

Week3 Assignment Solution

The document contains 10 multiple choice questions related to laser properties and calculations. Question 3 asks to calculate the radius of a laser beam waist given the wavelength and convergence angle, and the answer is 0.965 μm. Question 4 asks to calculate the mode spacing of a laser cavity given the length, and the answer is 1.5 GHz. Question 6 asks to calculate the Q-factor of a laser given the wavelength and linewidth, and the answer is 444.6 x 103.

Uploaded by

Usi Kuntal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Assignment 3

Q1 . Threshold condition for LASER action is


a) R1R2e(γ-k)x = 1
b) R1R2e(k-γ)x < 1
c) R1R2e(γ-k)x > 1
d) R1R2e(k-γ)x = 1
Q2 . Radius of a TEM00 is define at the position where (Ic =
intensity at center of beam)
a) I = Ic/e2
b) I = Ic/e
c) I = log Ic
d) I = Ic/2
Q3. If a laser beam of wavelength λ= 400nm has angle of
convergence (θ) = 150. Find out the radius of at the beam
waist (ω0).
a) 16.98 nm
b) 34 nm
c) 0.96 μm
d) 2 μm
Q4. Calculate the separation (Hz) between two consecutive
modes of LASER with cavity length L = 10 cm. (take RI = 1)
a) 3 GHz
b) 1.5 GHz
c) 6.67 GHz
d) 8 GHz

Q5 Calculate the coherence length for a beam travelling in


water (RI=1.33) for which the emission linewidth is 1500 MHz
a) 15 cm
b) 10 cm
c) 12 cm
d) 20 cm
Q6 Calculate the Q factor of a LASER with central wavelength
of 450nm and spectral FWHM of 1.5GHz.
a) 489 x 103
b) 444 x 103
c) 230 x 103
d) 1 x 106

Q7. Calculate the number of longitudinal modes


corresponding to a given gain bandwidth of 15GHz that can
oscillate in a laser cavity of length 100cm.
a) 10
b) 100
c) 1000
d) 200
Q8 Calculate the peak power of a LASER if Pavg = 3W, pulse
width = 80 ns and repetition rate= 75 KHz
a) 500 W
b) 100 W
c) 555 W
d) 10 W
Q9. For a hyperbolic secant laser pulse, time-bandwidth
product is
a) 0.31
b) 0.41
c) 0.23
d) 0.56
Q10. For a LASER setup emitting at 800nm, Pavg = 1.5W and
Ppeak= 250W. Duty cycle of LASER will be
a) 5 x 10-3
b) 4 x 10-3
c) 6 x 10-3
d) 9 x 10-3
3. If a laser beam of wavelength λ= 400nm has angle of
convergence (θ) = 150. Find out the radius of at the beam waist
(ω0).
Solution: -
ω0 = , = 15° = 15 × 0.0176
×
ω0
. × × .
2 × 400 × 10
= = 965 × 10
3.14 × 15 × 0.0176
ω0 = 0.965

4. Calculate the separation (Hz) between two consecutive


modes of LASER with cavity length L = 10 cm. (take RI = 1)
Solution: -

Separation between two consecutive modes


×
= = 1.5 x 109 Hz
×
∆ = 1.5 GHz

5. Calculate the coherence length for a beam travelling in water


(RI=1.33) for which the emission linewidth is 1500 MHz
Solution: -

∆ = 1500
n = 1.33
=
∆ ×
3 × 10
= = 0.15
1.33 × 1500 × 10
= 15

6. Calculate the Q factor of a LASER with central wavelength of


450nm and spectral FWHM of 1.5GHz
Solution: - ∆ = 1.5
×
x 1014 Hz
×

Q=
.
= 4.446 x 105
.

Q =444.6 x 103

7. Calculate the number of longitudinal modes corresponding


to a given gain bandwidth of 15GHz that can oscillate in a laser
cavity of length 100cm.
Solution: -
×
1.5x108Hz
×

= 15x109 Hz
Number of longitudinal modes =

8. Calculate the peak power of a LASER if Pavg = 3W, pulse width


= 80 ns and repetition rate= 75 KHz
Solution: - 80 ns

Time period(T) =

= = 1.333 x 10-5 s
×

.
x 104 W

10. For a LASER setup emitting at 800nm, Pavg = 1.5W and Ppeak=
250W. Duty cycle of LASER will be
Solution: -

Duty cycle =

1.5
= 0.006 = 6 x 10-3

You might also like