Light

Architecture 2

urs RECHER
First of all I would like to thank Lenny and Warren of Primaimaging, Jakarta. They encouraged me to
write this book and they also produced the first edition. In cooperation with their team and friends they
also ensured that my English became understandable.

John and his team from Brainwave Design in Singapore were very patient with me. They changed the
layouts, the texts and the diagrams for me again and again and again.

For many years, my wife Debby has always provided important feedback on my work and criticized my
photography constructively. She often assisted me, and waited patiently until I had the shot I wanted.

Bron Elektronik AG in Switzerland owns the copyright of some pictures. I would like to thank them for
placing the shots at my disposal and for producing the second edition of Light Architecture.

My friend Julia had a close look at chapter one. She corrected my English and made sure that everybody
can understand what I am trying to explain. Pamela finally checked and corrected all the textfiles of this
second edition.

This book is for Debby and Anouk.

Urs Recher photography

www.ursrecher.ch
Contents
1. Introduction: Light Follows Rules  5
1.1 Hard, Soft And Diffused Light  5
1.2 Five Parameters To Classify Light  7
1.3 The Inverse Square Law  8
1.4 Direct And Diffused Reflections  9

2. The Set-Ups
2.1 Portrait & Beauty  11
2.2 Full Body & Fashion  18
2.3 Nudes  26
2.4 Products  34
2.5 Mixed Lights  42
2.6 Available Light  49

3. The Lightshapers
3.1 Lightshapers and their Characteristics  62
3.2 The broncolor System  64
light follows rules
 1.1 Hard, Soft And Diffused light
1.1.1 Hard light:
This book is supposed to be “different”. Unlike most photography books it does not give fixed Looking at the light of a point light source, we will see very clearly defined shadows. On a background
rules, such as how this or that has to be illuminated, or which contrast is the right one and which or underground there is either light or shadow, but nothing in between, with no gradations. Even
focal length and shutter speed has to be used. the finest details provide a clear shadow. The structure of any object (e.g. textile, skin) is pointed
out very clearly.
Every photographer still has to decide how he (or she) wants the photograph to look. I just try to
give an idea how light functions. With the theoretical background, we should be able to get the A very hard light source is the only one that does not change its characteristics when we vary the
result we want. distance (but it does change the power – see “1.3 The inverse square law”). The shadows remain
the same: very sharp.
Before we start analysing photographs and set-ups, we should take a brief look at light and its
rules. This helps to really understand why which lightshaper is used and – just as important – where Hard light may increase the contrast of the object. The areas directly lit may be burnt while the
and how it should be placed. shadows remain very dark. The hardness of the light finally has an influence on the color saturation.
Small, hard light increases the saturation of the picture while soft, and especially diffused light
We have to understand the set-ups and should not try to learn them by heart or copy them like a reduces it.
menu from a cookery book! When we understand the rules, we do no longer have to hope for good
results and can determine how to modify the light until we get the effect we are looking for. The following lightshapers can be used as hard lights:
Any open reflector like P70, P65, P45, P50, PAR reflector, when used over a certain distance; i.e.
Our technical abilities in forming light must not limit our creative visions! And in a second step – a few meters or more. Fresnel spots like Pulso Flooter, Pulso Spot 4, Fresnel spot attachment for
after having achieved a profound understanding of light – we should start forgetting about all the Picolite. Optical systems like Pulso Spot 4 with 150 mm Optical snoot, Projection attachment for
technical aspects of our work and only concentrate on the visual, the emotion, the moment and Picolite and Profil 15/42. Sunlite-set, Litestick or bare bulbs (lamphead with no attachments at all).
the model.

All the photographs are shown with a minimum of manipulation. I want to give a very honest and
realistic impression on what can be expected, when working with the set-ups as explained in
Chapter 2. In particular the skins are not retouched and the original texture is still visible.

All the names of the lightshapers used in this book refer to the broncolor system that is described
in chapter 3. It is the lighting system I use for my daily work, and it is the one with the widest
range of lightshapers. It therefore offers the most creative possibilities when working with the most
important tool of a photographer: LIGHT.

5
1.1.2 Soft light: 1.1.3 Diffused light:
Average soft light sources have about the same sizes as the objects or set-ups they illuminate: Now the light source is huge. Shadows no longer exist, as the light is big enough to shine all around
Let’s say a 50 by 50 cm softbox for a narrow cropped portrait or an 80 by 140 cm softbox for a full the object or model.
body shot.
The light does not show any direction anymore. The only contrast remaining in the photograph is
The shadows on the underground and background are still clearly visible, even when they are not the contrast of the object itself.
sharply defined anymore. Big parts of these shadows are graduated and a small core shadow still
exists. Small and fine details however do not appear. The texture of our object is now shown in a The structure of the object’s surface is as flat as possible, almost invisible and the color saturation
lower contrast and is therefore not as clear as in a hard light. is heavily reduced.

Soft light increases the contrast of the object a little, but less than a hard one. The final color The following lightshapers (or set-ups) can be used as diffused lights:
saturation is somewhere in between the one derived from a hard light (high) and a diffused light Big softboxes at short distances for rather small objects. Indirect lights reflected by several bright
(low). walls (these walls have to be neutral in color to avoid a color shift). Light-tents wrapped around the
object.
Being soft, our light source has a certain size (it is not a point anymore) and the distance from it
becomes very important. The closer we get, the bigger the light source becomes (seen from the A good example to illustrate the difference of hard and soft shadows:
perspective of the object or model). This means that our light becomes softer when we get closer, Through a very narrow opening of curtains, daylight is falling into this hotel room. Horizontally, the
and harder when we use it over larger distances. opening is only a few centimeters wide – the corresponding shadows are very hard. The vertical
shadows however, are very soft because the curtains let some light in from the ceiling to the floor.
A light of about 100 cm by 100 cm placed at 4 meters from the model has the same hardness as a
source of half the size (50 cm by 50 cm) at half the distance (2 meters). Due to the inverse square In the studio, this effect can be simulated with narrow Striplites like the Striplite 120 or with some
law, we can expect other effects (see 1.3). When we bring the 100 cm by 100 cm softbox to half the limitations, a Pulsoflex EM 30 × 114 and EM 40 × 155.
distance (we will have to reduce the power by about 2 f-stops), the light will be a lot softer.

The following lightshapers can be used as soft lights:

Any sized softbox (choose the dimensions and the position carefully!) Acrylic area lights such as
Hazylight-Soft, Boxlite 40 (for quite small objects) and Satellite Staro. “Soft spots” such as Satellite
Evolution, Mini-Satellite when completely focused.
Their light is directed (not diffused), but they have a large diameter and are therefore soft. Softlight
reflector P-Soft, Para FB focused and defocused.

6
1.1.4 Light and three dimensionality: Only when we use soft light (preferably with rather high contrast) will we get all the fine details in
An object or a body lit with hard light only shows very little gradations. A specific spot is either different grey values. All forms and shapes become perfectly visible in the photograph and we can
bright or dark but there are almost no grey values in between. We refer to this as a two-dimensional call this kind of light three-dimensional. Compare the black and white picture of a woman’s back
light. in Chapter 2.3.

S L H = Hard light G

Soft light
S L
L = Light L = Light
S = Shadow G = Gradations G
S = Shadow

When we now light the same set-up in a diffused manner, we even “lose” one more dimension: The
entire object shows the same brightness. Diffused lights have the lowest contrast of all possible
lights. It does not add any contrast to the picture; the only contrast remaining in the photograph is
the one of the object itself. On a portrait shot we can make use of this fact to let the skin appear 1.2 Five Parameters To Classify Light
flawless. 1.2.1 Coverage:
The coverage of a lightshaper tells us how the light is distributed. It can be:
• Even (e.g. big softbox behind camera, open reflectors defocused, Para FB
defocused, optical snoots)
• Center weighted (e.g. open reflector focused, Para FB focused, PAR reflector,
some Fresnel spots, any lightshaper with honeycomb grids)
• Linear graduated: (e.g. long and narrow softboxes at short distance, Striplites and
Indirect diffused light Lightbars as sidelights)
Object lit all around.
No shadows.
No Gradations.
1.2.2 Edge-transfer:
The edge-transfer gives us an idea of how abrupt the light ends once we reach the end of
the light angle. It can be:
• Very sharp (e.g. optical snoots and attachments)
• Quite sharp (e.g. Fresnel spots, Satellite Evolution, Mini-Satellite and honeycomb grids)
• Soft (e.g. softboxes, acrylic area lights such as Hazylight-Soft and Boxlite 40, open reflectors)
• Non-existent (bare bulb, Balloon, Litestick and Lightbar)
7
1.2.3 Shadow definition: 1.3 The Inverse Square Law
Shadows of hard lights are highly defined while soft lights have a low shadow definition. Diffused The intensity of light falls off with the square of the distance.
lights have no shadows at all.
Two examples:
1.2.4 Shadow contrast: At twice the distance we get 2 × 2 = 4 times less light.
Working in a black or very large studio we can expect black shadows whenever we do not
intentionally brighten them up with a fill-in light. We move a light from 2 meters to 10 meters. This is 5 times farther.
5 × 5 = 25 ~ we get 25 times (about 4½ f-stops) less light.
In smaller or more brightly painted environments however, light can be bounced back from the
walls and fill in the shadows. In this situation the shadow contrast depends directly on the light This mathematical rule is only 100% correct if we calculate the fall-off of a point-light source. Huge
angle of our source: Directed spots or standard reflectors with honeycomb grids do not hit the walls area lights and especially the directed and parallel light of spots such as the Satellites, Para FB
very much, resulting in black shadows. Working with the broncolor Balloon we have a light angle of and Fresnel lights, have a fall-off that is much slower. The power of the light stays constant over
360°. All the studio walls will get a lot of light and the shadows will be very bright. a bigger area.

When we are working with such a “wide-angle light”, the inverse square law (see 1.3) still gives us Working in smaller studios (especially with bright walls) it might be very difficult to get dark shadows
a possibility to control our shadows: The closer we get (to the object or model) the faster the light and backgrounds, but only as long as the lights are far away from the model. In this situation we
falls off after hitting it. This makes the walls (and the floors and ceilings) darker and the shadow have almost the same amount of light on all the walls.
contrast is increased. The background turns bright and all the other walls fill in the shadows.

1.2.5 Highlights: When we move the light closer, it falls off much faster, the studio walls turn black and now we can
We will have a very close look at highlights in chapter 1.4 – directed and diffused reflections. control the shadows.

In general we can say that the highlights of hard lights are very small and completely burnt. Those Soft light is difficult to direct. Only very few soft light sources can be used with honeycomb grids.
of soft lights show clearly the form of the lightshaper (rectangular or round) and might still be burnt This means that most of these lights illuminate a model or an object very evenly. Only when we use
a little. Diffused lights finally should not show any dominant highlight anymore, but they can reduce soft lights very closely (and the light falls off quickly), can we still get nicely graduated illuminations.
the colors dramatically (e.g. the color of eyes in a diffuse portrait).

8
1.4 Directed And Diffused Reflections Let’s have a look at two details from a product shot. Both are done with the same lightshaper: A
Reflections in mirrors, glasses, eyes, chrome, polished surfaces and water are directed reflections. Boxlite 40.
Those on textiles, stones, wood, matt skin and any other matt material are called diffused reflections.
And there is a lot in between directed and diffused reflections, such as oily skin and any kind of In the left picture, the Boxlite 40 is 120 cm away from the object. The highlights are small and burnt,
coated surfaces (semi-gloss). and the letters cannot be read.

When the distance (and the position) of a lightshaper to the object is changed, directed and diffused Before exposing the right one, I put the light source closer (at about 40 cm) and reduced the power
reflections will show different effects. Diffused reflections change their brightness according to the (around 3 stops). The highlight is still visible, larger but not burnt anymore.
inverse square law. When we put the light source at twice the distance, the object gets about 2
f-stops darker. When we now shoot a mirror (as a perfect example of a directed reflection) and In addition, you will realize that the contrast is higher when we move the light closer. Due to the
again change the distance of our lightshaper (for example a big softbox), the reflection of the inverse square law, less light is reflected from the walls and the shadows turn darker.
softbox in the mirror becomes smaller but not darker. The reflection is always as bright as the light
source itself! After all these theoretical highlights, we should never forget that a photographer’s most important
tool is his eyes! Don’t forget to open them.
How can we use this knowledge?
Lighting a portrait over a large distance requires a rather high output of light to achieve a correct
exposure. As the lightshaper itself is very bright in this situation, directed reflections (eyes, glasses
and skin without make-up) are bright too. The glasses show strong reflections and the skin looks
oily.

Now we bring our light a lot closer, at 1/3 of the original distance. According to the inverse square
law we can reduce the power a little more than 3 f-stops and still get the correct exposure. But as
the lightshaper itself is now 9 times darker, all the directed reflections mentioned above are a lot
less disturbing or even invisible.
The glasses become transparent and the skin matt!

9
the setups
 2.1 Camera type and Medium
35 mm SLR/ black and white negative
A reasonably sized softbox (Pulsoflex C 60 × 100 cm) was chosen to shoot this
portrait. It was placed very close and right above the head. As it is used at an
Resolution / Sensitivity
24 × 36 mm / ISO 100 angle of about 90 degrees to the camera, the light is not flat or too soft, but
Focal length shows a dramatically shaped face.
135 mm
Shutter speed / f-stop
1/60 sec / f 11 I made sure that the fill-in is not diffused by using a mirror as a “hard reflector”.
This tool is used at an “aggressive angle” by touching the model’s upper body,
causing the only reflection to be seen in the eyes. In a photograph with a
hard main light, you should not use this kind of reflector, as you may get twin-
shadows.

If the light becomes too harsh, both the main light and the reflector can be
portrait & beauty

moved slightly towards the camera.

1 Pulsoflex C 60 × 100 cm on a unilite

4
lamp base
2 Mirror M
3 Black background paper
4 Camera 2
M Model 3 Top view

Unilite Pulsoflex C Nano 2

60 × 100
11
 Camera type and Medium In most shots shown in this book, Para FB is used defocused to shape a body
Medium format with digital back
or an object perfectly. In this beauty shot however, I wanted to optimize the
Resolution / Sensitivity
16 Mpixels / ISO 50 appearance of skin that is already very good. The way to do this is to move the
Focal length light closer to the lens. Working with Para FB, this means nothing more than
120 mm
focusing it!
Shutter speed / f-stop
1/125 sec / f 8

Compared with photographs, where Para FB was used defocused, you will
notice that the light on the face is somewhat flatter, but that the contours are
still very clear, even when this portrait is overexposed by almost a full stop.

The background is evenly lit with a symmetrical power pack (Nano 2) and a
Topas A2 is used for the Para FB.

2 1

1 Para 220 FB focused

2 Pulsoflex EM 80 × 140 cm on Unilite 2
lamp base to illuminate the background
M
3 White background paper
3
4 Camera
M Model Side view

Unilite Pulsoflex EM Para 220 FB Nano 2 Topas A2

80 × 140

12
 Camera type and Medium The Litestick is positioned as close as possible to the model and just above
Medium format with digital back
the picture frame. The camera on the other hand is far away and equipped with
Resolution / Sensitivity
22 Mpixels / ISO 50 a rather long lens. This set-up ensures that we get the harsh fall-off on both
Focal length sides of the model’s face.
250 mm
Shutter speed / f-stop
1/125 sec / f 16 Due to the very big light angle of the Litestick you may have to place black
flags on both sides of the model.

Start with the white background first and make sure that the light bounced
back has no effect on the face, especially the contours. These should be dark
in the final shot.

1 Litestick centered and just above the 2

picture frame
1
2 Pulsoflex EM 30 × 110 cm on Pulso G
lamp base illuminates the background
3 White background
M 4
4 Camera
M Model
S Darker edges, as the light of the 2
Litestick does not reach these areas

Side view

M 1 4

Litestick Pulsoflex EM Pulso G Nano 2 Grafit A2

30 × 110

13
 Camera type and Medium If the skin looks too oily, mount the soft-reflector to the Ringflash C. This makes
Medium format with digital back
the reflection on the skin less dominant (see chapter 1.4 Directed And Diffused
Resolution / Sensitivity
22 Mpixels / ISO 50 Reflections).
Focal length
80 mm
The soft-reflector (in cooperation with the modelling lights of Ringflash C) also
Shutter speed / f-stop
1/60 sec / f 11 reduces the red-eye-effect.

For a portrait, the focal length chosen is very short. This guarantees a fall-off
of the light from the arms to the face and avoids a very even illumination that
would be typical for the Ringflash C used as a main light (see chapter 1.3 The
Inverse Square Law).

Balance carefully the power of the Ringflash C. If it is too bright, the shot
becomes flat. If it is too dark, the skin may look “dirty”.

1 Ringflash C without honeycomb grids

M 4
2 Pulsoflex EM 30 × 110 cm on Pulso G
lamp base
3 P65 standard reflector with 3
honeycomb grid on Pulso G lamp base
4 Camera
5 2
5 Dark grey background paper
M Model Top view

Ringflash C Pulsoflex EM Pulso G Standard Honeycomb grids for P65, P45 Topas A2 Verso A2
30 × 110 Reflector P65 and PAR, set of 3 pcs.
14
 Camera type and Medium Para 220 FB (defocused) is used from the right side of the camera. Apart from
Medium format with digital back
placing the Para 220 FB centered behind the camera, we can also use it as
Resolution / Sensitivity
22 Mpixels / ISO 50 a side light. It forms the face (or an entire body) perfectly by using one only
Focal length lightshaper!
120 mm
Shutter speed / f-stop
1/125 sec / f 11

M 3

1 Para 220 FB defocused

2 Bright grey background paper
3 Camera 2
M Model Side view

Para 220 FB Topas A2

15
 Camera type and Medium The Pulsoflex C is placed very close to the model and directed more towards
Medium format with digital back
the camera than to the face.
Resolution / Sensitivity
22 Mpixels / ISO 50
Focal length Due to the soft edge-transfer (see paragraph 1.2.2 Edge-transfer) of the
120 mm
Pulsoflex C, you get nice gradations on both sides of the face and not only on
Shutter speed / f-stop
1/125 sec / f 8½ the shadow-side.

Although the softbox is very close, the light remains hard as from the model’s
perspective only a very narrow Striplite can be seen. As such, this light
emphasizes the structure of the skin and is best used with models having very
good skin. The cardboard (3) controls the shadows on the right side of the
model’s face, and the reflecting wall (4) controls those on the left.

The high color saturation of the light makes it perfect for make-up shots and
the narrow highlights put a cat-like accent on the eyes.

1 Pulsoflex C 60 × 100 cm on a Pulso G 3

lamp base
2 P65 standard reflector with
honeycomb grid on a Pulso G lamp
base
3 Black/white cardboard (the black side M 6
towards the lens)
4 Reflecting wall 4
5 Dark grey background paper 2
6 Camera
5
M Model Top view

Pulsoflex C Pulso G Standard Honeycomb grids for P65, P45 Grafit A2

60 × 100 Reflector P65 and PAR, set of 3 pcs.
16
 Camera type and Medium The portrait is shot with still-life tools using two Striplites 60. Using equipment
Medium format with film 120
in an untypical way can create new effects and ideas for lighting.
Resolution / Sensitivity
6 × 6 cm / ISO 100 With the angle of the two Striplites, adjust the gradations towards the ears (see
Focal length paragraph 1.2.2 Edge-transfer) and in their position you control the darker area
150 mm
in the center of the face. Adjust the two Striplites 60 very carefully and protect
Shutter speed / f-stop
1/125 sec / f 11 the lens well from their light (5).

The Softlight reflector P-Soft is used as fill-in light. Place it as close as possible
to the model’s upper body and just below the picture frame.

Depending on the hair color, the reflective cardboard (4) is placed higher above
or closer by the model

This special lighting requires very precise power adjustments and a large
power range. Two Grafits were the first choice.

3
1 Striplite 60 almost straight to the
camera 4
2 Softlight reflector P-Soft from below 1
the model’s face 6
3 P65 standard reflector on a Pulso G
lamp base for the background
M 2 5
4 White cardboard above the models
head for a decent fill-in on the hair
5 Camera
6
6 Black flags to protect the lens from the
strong light of the two Striplites 60 and 1
to avoid flair.
7
M Model Top view

Striplite 60 Softlight Pulso G Standard Grafit A4 Grafit A2

Evolution Reflector P Reflector P65
17
 2.2 Camera type and Medium
Medium format with digital back
Place the big area light (1) as low as possible. Your light gets very soft and
nicely graduated with a heavy fall-off towards the legs (see chapter 1.3 The
Resolution / Sensitivity
22 Mpixels / ISO 50 Inverse Square Law). The scene can be filled-in differently, but only Para FB
Focal length (used defocused) shapes the body this perfectly. The camera is rather low,
120 mm
about as high as the model’s knees. The result is an elegant, tall body. Using a
Shutter speed / f-stop
1/125 sec / f 8 large aperture (f 8.0) avoids visible structure (like footprints and crinkles) on the
background, as it is far out of focus.

A remote controlled Grafit A4 was used to feed the Cumulite. The second one
full body & fashion

was for the Para FB.

1
4

1 Cumulite 2 (if not available use a 2

Pulsoflex C 150 x 150 cm) as main-light
2 Para 220 FB, defocused as a fill-in
M
3 P65 standard reflector with
honeycomb grid on a Pulso G lamp 6
base for the bright spot on the
background
4 Dark grey background paper
5 Low table (30 cm), covered with the
same background paper 5
3
6 Camera
M Model Side view

Cumulite 2 Pulsoflex C Para 220 FB Pulso G Standard Honeycomb grids for P65, P45 Grafit A4
150 × 150 Reflector P65 and PAR, set of 3 pcs.
18
 Camera type and Medium First adjust the exposure of the light table. The textile should not be burnt.
Medium format with digital back
Resolution / Sensitivity
22 Mpixels / ISO 50 Then comes the white background. You may want to consider protecting the
Focal length model from scattered light with some black flags.
120 mm
Shutter speed / f-stop
1/125 sec / f 11 Place the accent lights and adjust the power. Fill in the model’s face by using
a lightshaper with honeycomb grids to direct the light on the model’s face
only. Do not fill-in the entire set-up. This might destroy the cool and mystical
lighting.

Two symmetrical power packs (Nano 2) illuminated the white acrylic from
below while the asymmetrical ones were used for the other lightshapers.

5 4
1 White acrylic plate on 40 cm Foba
tubes (white paper on floor below) 1
2 2
2 Pulso G lamp bases (bare bulb, no
accessories)
3
3 Satellite Staro with honeycomb grid
on Unilite lamp base as a fill-in on the
model’s face only M
4 Pulsoflex EM 30 × 110 cm on Pulso G 7
lamp base as accent lights
5 Pulsoflex EM 80 × 140 cm on
background 2 2
6 White wall 4
5
7 Camera
M Model 6 Top view

Pulso G Unilite Satellite Honeycomb grid Pulsoflex EM Pulsoflex EM Grafit A4 Nano 2 Topas A4
Staro for Satellite Staro 30 × 110 80 × 140

19
 Camera type and Medium A single lamp base, equipped with a matt protecting glass (1), is placed quite
Digital DSLR
close behind a small opening of two polystyrene walls (2). This is the reason
Resolution / Sensitivity
21 Mpixels / ISO 100 why the shadows of the two walls are soft and evenly graduated.
Focal length
55 mm
The model however is far away from the light source and close to the
Shutter speed / f-stop
1/125 sec / f 11 background wall - her shadow appears hard. ( Read 1.1.1 and 1.1.2, hard and
soft light.) To avoid too much indirect light and to guarantee a high contrast,
the polystyrene walls are painted black on the side facing the lamp head and
another black cardboard (3) blocks most of the light going towards the ceiling.

4
M

1 Pulso G bare bulp (no accessories) 3

1
2 Black painted polystyrene walls
to cut the light
3 Black cardboard over the lamp base 2
to cut the light
4 White wall
5 Camera 5
M model Top view

Pulso G Scoro A4S

20
 Camera type and Medium To simplify the assembling of three different shots in one, it was very important
Medium format with digital back
to illuminate the blue background as evenly as possible.
Resolution / Sensitivity
16 Mpixels / ISO 100
Focal length Make sure that the distance between the model and the background is big
120 mm
enough. Otherwise the blue light might bounce back and provoke an unpleasant
Shutter speed / f-stop
1/125 sec / f 16 skin tone.

3 3

2 2

M 6

1 Satellite Staro (without grids) on a

Pulso G lamp base, above the camera
2 P65 standard reflectors on Pulso G 5
lamp bases, defocused
3 Light blue filters (about ½ stop)
4 White background
5 White acrylic on a white covered low 7
table, shiny side up
6 Cotton wool
1
7 Camera
M Model Top view

Pulso G Standard Satellite Grafit A4

Reflector P65 Staro

21
 Camera type and Medium The three indirect lights all have the same power and their light circles overlap
Medium format with digital back
a little on the white walls. The camera is as close as possible to the reflecting
Resolution / Sensitivity
16 Mpixels / ISO 50 wall and in a position where no direct light from one of the standard reflectors
Focal length can reach the lens.
120 mm
Shutter speed / f-stop
1/125 sec / f 11 The big Pulsoflex C 150 × 150 cm on the opposite side is used as an additional
accent light (and not as a fill-in). Therefore it is placed behind the model. The
saturation of the entire shot (except the blue-jeans) is reduced to 50%.

This very soft (almost diffused) light reaches every corner of the studio. No
additional light for the background is required.

4
1 White walls (paper, polystyrene or 2
cloth), in total 6 to 8 meters
2 P70 standard reflector on Pulso G
lamp base used as main light 3
3 P70 standard reflector on Pulso G 1
lamp base used as fill-in light
4 P70 standard reflector on Pulso G
lamp base used as accent light M 7
5 Pulsoflex C 150 × 150 cm on Pulso G
lamp base 6

6 White wall
7 Camera 5
M Model Top view

Standard Pulso G Pulsoflex C Topas A4

Reflector P70 150 x 150

22
 Camera type and Medium Two Pulso G lamp bases both equipped with a UV attachment illuminate the
35 mm DSLR
model wearing white underwear. The left one is used as main light (1). On the
Resolution / Sensitivity
10 Mpixels / ISO 100 right and very close to the camera we placed the second as fill-in (2).
Focal length
135 mm
In this situation, a white reflective wall would not be useful as a fill-in light
Shutter speed / f-stop
1/125 sec / f 11 because it would convert the UV flash into the visible spectrum and illuminate
the model with visible (day-)light.

The background is lit with a “normal” flash head and a P65 standard reflector
(3) with medium grids.

M
3

1 Pulso G lamp base with UV

attachment (main light)
2 Pulso G lamp base with UV
attachment (fill-in)
3 Pulso G lamp base with P65 and
honeycomb grids 1
4 Black acrylic plate on low table
5 Grey background paper
2
6 Camera
6
M Model Top view

Pulso G UV attachment Standard Honeycomb grids for P65, P45 Scoro A4S
Reflector P65 and PAR, set of 3 pcs.
23
 Camera type and Medium The exposure is 50% candlelight and 50% flashlight. The grey balance is in
Meduim format with digital back
between the two color temperatures (about 4000 K). The candles appear warm
Resolution / Sensitivity
22 Mpixels / ISO 100 and the flashlight already turns a little blue. No color filters are required.
Focal length
120 mm
Try different time – aperture – variations.
Shutter speed / f-stop
1/4 sec / f 5.6 ½

The bare bulbs below the acrylic had to be at a very low intensity. They should
not overpower the candles. I used two Grafit A2 at the lowest possible settings
(15 joules each).

1 1
M

1 Pulso G lamp bases (bare bulb, no

accessories attached)
2 White acrylic plate on 40 cm foba tubes
(white paper covers the floor below).
About 200 lit candles 5 1 1 5
3 Para 220 FB (defocused) as fill-in light 2
4 Softlight reflector P-Soft with diffuser
and honeycomb grid hidden behind
the acrylic. It is lighting the background
unevenly (center weighted)
7
5 Cardboard walls to avoid air circulation
that would blow out the candles
3
6 White background
7 Camera
M Model Top view

Para 220 FB Pulso G Softlight Honeycomb grid Grafit A2 Grafit A4

Reflector P for Softlight

24
 Camera type and Medium This (diffused) indirect illumination of the background is very even. Any structure
Medium format with digital back
(like texture of the wall paint or small crevices) of the background wall gets lost
Resolution / Sensitivity
16 Mpixels / ISO 50 - even without overexposure.
Focal length
120 mm
Make a first shot with the background only. Set the white there to RGB
Shutter speed / f-stop
1/125 sec / f 11 250/250/250. This ensures a clean white, but it is not strong enough to have
an influence on the model that should appear completely black now. If she
appears too bright you increase the distance between her and the background.

Painting the polystyrene walls black on the side facing the model will help to
achieve a clear distinction of the white clothing against the white background.

As the acrylic plate has a shiny surface, possible shadows on the left side are
“reflected away”.

3 1

2
1 Para 220 FB defocused
2 P70 standard reflectors on Pulso G
lamp bases bounced indirectly to 4
illuminate the background
3 High polystyrene walls; the white side
is facing the P70 standard reflector
7
4 White acrylic plate on a low, white
covered table
5 White background paper M
6
6 Reflective wall to control the contrast 2
7 Camera
M Model 5 3 Top view

Para 220 FB Standard Pulso G Grafit A4 Nano 2

Reflector P70

25
 2.3 Camera type and Medium
Medium format with digital back
We can compare this set-up with a classic portrait: We have a main light (1), an
accent light (2) but instead of a fill-in light we use black velvet.
Resolution / Sensitivity
22 Mpixels / ISO 25
Focal length This set-up might be too harsh for a portrait but is a simple solution to illuminate
120 mm
a body interestingly.
Shutter speed / f-stop
1/125 sec / f 16

With the angle between the two lights and the model (in this example I had
exactly 180 degrees), we can adjust the size of the shadow on the body.

1 Pulsoflex EM 80 × 140 cm on a Unilite 1

lamp base
2 Pulsoflex EX 30 × 110 cm on a Unilite
lamp base
3 Black velvet M 6
4 Dark grey background paper
5 P65 Standard reflector on a Pulso G
lamp base
nudes

4 3
6 Camera
M Model 2 Top view

Pulso G Standard Unilite Pulsoflex EM Pulsoflex EM Grafit A4

Reflector P65 30 × 110 80 × 140
26
 Camera type and Medium To emphasize the form of the body and to show clearly the structure of every
Medium format with a digital back
muscle, I chose the biggest Para FB and used it completely defocused.
Resolution / Sensitivity
22 Mpixels / ISO 50
Focal length Using it like this, the center of Para FB does not reflect any light. The reflections
80 mm
are coming from the edges, all around the camera. These are sidelights and
Shutter speed / f-stop
1/125 sec / f 16 therefore they shape the body perfectly.

To read more about the light of Para FB, see chapter 3.1 Lightshapers And
Their Characteristics / Para FB.

1 3

M 4

1 Black acrylic plate on low table

2 Black velvet
3 Para FB 330 defocused
4 Camera
M Model Top view

Para 330 FB Grafit A4

27
Camera type and Medium Daylight is underexposed by about 1 stop.
35 mm / color negative
Resolution / Sensitivity
24 x 36 mm / ISO 160 The model is illuminated with a Ringflash C (and a certain amount of indirect
Focal length light as the location is small and the walls bright).
35 mm
Shutter speed / f-stop
1/200 sec / f 11 With 35 mm the focal length is very short, and the perspective therefore
dramatic. In this set-up, a Ringflash that is always rectangular around the lens
would create a heavy gradation on the body: The head would be underexposed
and the legs way overexposed (see chapter 1.3 The Inverse Square Law).

The new Ringflash C can be tilted in any direction to compensate this effect (if
needed, three different honeycomb grids will give even more control over the
illumination).

M 1

1 Ringflash C 2
2 Camera
M Model Side view

Ringflash C Verso A2

28
 Camera type and Medium A huge soft light is one of the best possibilities to shape a body and make
Medium format with b/w film 120
many details visible (see 1.1.4 Light and three dimensionality).
Resolution / Sensitivity
6 × 6 cm / ISO 100
Focal length At the beginning, set all three indirect lights to the same power (and choose
120 mm
this setting as your aperture). Different parts of the body get more or less of
Shutter speed / f-stop
1/125 sec / f 8 the light and therefore appear nicely graduated - from an overexposure of 1½
stops on the light side to an absolute black in the shadows. The power of the
three lights can then be adjusted individually.

To make sure that the light does not become diffuse and flat, place a large
black wall very close to the model. This increases the contrast to a maximum.

3
1
1 P70 Standard reflector on a Pulso G
lamp base, indirect (main light)
2
2 P70 Standard reflector, indirect (fill-in
light)
3 P70 Standard reflector, indirect
(accent light) M 6
4 Large black velvet
5 Medium grey background paper 5
4
6 Camera
M Model Top view

Standard Pulso G Topas A4

Reflector P70
29
 Camera type and Medium Unlike the black and white photograph of a woman’s back in this chapter that
Medium format with a digital back
is shot with only one soft light, this body detail is realized with hard lights. To
Resolution / Sensitivity
22 Mpixels / ISO 50 get a lot of details in the photograph, I had to work with not less than six lights.
Focal length
120 mm macro
Both Standard reflectors are not directed straight at the model, but more
Shutter speed / f-stop
1/125 sec / f 16 towards the camera. With the use of honeycomb grids, we achieve additional
gradations.

Once the light is placed, vary the illumination with the position of the model
rather than replacing the lights too often.

All the lightshapers had a high light output (open reflectors) and were extremely
close to the model. Power packs like Grafit A2 and Verso A2 that allow
performance at very low settings were essential.

1 Picture frame
2 P70 Standard reflector with 5 2
honeycomb grid on Pulso lamp base,
both very close to the body
3 Picolite with Fresnel spot attachment
to the model’s neck
4 Pulsoflex EM 30 × 110 cm on Pulso G 3
lamp base as a backlight from the right
behind the model
4
5 P65 Standard reflector on a Unilite 2
lamp base for the background (dark
grey paper) M
1
6 Small mirror (held in hand)
M Model 6 As seen from the camera

Standard Pulso G Unilite Picolite Fresnel spot Pulsoflex EM Honeycomb grids for P70, Grafit A2 Verso A2
Reflector P65 small lamp attachment 30 × 110 set of 3 pcs.
for Mobilite/Picolite
30
 Camera type and Medium The body landscape on page 52 is illuminated with no less than 5 independent
Medium format with digital back
spotlights. If we want to extend this kind of illumination to a full body shot, we
Resolution / Sensitivity
22 Mpixels / ISO 50 can either use some 25 lights or:
Focal length
80 mm
We use one single light (here it is a Picolite (1) with the most narrow honeycomb
Shutter speed / f-stop
20 sec / f 32 grid), and move it around the model while we constantly fire one flash after
another. This shot is done with a sequence of 40 flashes and an interval of
½  sec, which requires an exposure time of 20 seconds.

When we make sure that every spot of the body is only lit with one single flash,
we can expect an absolute sharp picture, even when the model moves a little
bit (breathing) during the very long exposure time.

A high-end power pack such as Scoro makes life very easy as the flashes are
fired in a constant and adjustable rhythm.

1 2

1 Picolite with narrow honeycomb grid

2 Black silk
3 Camera
M Model Side view

Attachment with 3 honeycomb grids Picolite Scoro A4S

and 2 aperture masks for Mobilite / small lamp
Picolite
31
 Camera type and Medium To illuminate an object diffused, the lightshaper should be several times the
Medium format with digital back
size of the object. On a full-body shot the easiest way to do this is by indirect
Resolution / Sensitivity
22 Mpixels / ISO 100 illumination.
Focal length
120 mm
Three bare bulb flash heads are directed away from the model, making sure
Shutter speed / f-stop
1/125 sec / f 8 that no direct light is hitting on her. All the walls are as white and color-neutral
as possible.

As the light comes from everywhere, a good lens shade is essential to avoid flair.
This light is very easy to handle. The model and the photographer can move
freely, the skin appears very clean, even without any make-up and reflections in
the eyes are almost invisible (see chapter 1.4 Directed And Diffused Reflections).

Indirect lighting always requires a lot of light. Here I used two power packs
Topas A4 at 3200 joules each.
3

2 1 5

1 Unilite lamp bases (no accessories 1 4 M

attached and directed away
from the model)
2 White background paper
3 White polystyrene walls
4 Camera 1
5 Background paper (bright sepia)
M Model 3 Top view

Unilite Topas A4

32
 Camera type and Medium In a first step, I illuminated the background and made sure that this light had
Medium format with digital back
no uncontrolled effect on the model’s body. Two black polystyrene walls (5)
Resolution / Sensitivity
39 Mpixels / ISO 50 block most of the light being reflected from the white background. When we
Focal length additionally place the model quite far away from the background, her body is
120 mm
almost completely black when we fire the background flashes only.
Shutter speed / f-stop
1/125 sec / f 16

After this, I placed a big soft box (here it is a Pulsoflex EM 80 × 140 cm (1))
above and slightly behind the model. We adjust its power carefully, so the body
doesn’t become too bright and the body forms are well visible.

2 2
1

1 Pulsoflex EM 80 x140 cm on a unilite

lamp base M

2 Pulsoflex EM 40 x155 cm on a Pulso G 5 5

lamp base 4

3 White background
4 White acrylic plate on table
5 Polystyrene walls to cut the light
reflected from the background
6 Camera
6
M Model Top view

Pulso G Unilite Pulsoflex EM Pulsoflex EM Scoro A4S

80 × 140 40 × 155

33
 2.4 Camera type and Medium
Large format with digital back
Not only for people photography but also for products, Para FB is one of the
best choices to shape and give volume to the object.
Resolution / Sensitivity
22 Mpixels / ISO 50
Focal length In this shot Para FB is used defocused.
180 mm
Shutter speed / f-stop
1/20 sec / f 22 Due to the long lens, the picture angle is very narrow and a Boxlite 40 is just big
enough to serve as a perfect white background. This technique is easier than
lighting a large white background and placing many black flags to protect the
(shiny) object from unpleasant reflections.
products

4
1 Para FB 330 defocused
2
2 Boxlite 40
3 White and shiny acrylic, slightly curved 3 1

4 Camera
α Picture angle Side view

Boxlite 40 Para 330 FB Topas A4

34
 Camera type and Medium A Picolite (1) on a floor stand and equipped with a projecting attachment
Large format with digital back
illuminates the acrylic table below and behind the frosted bottle. To compensate
Resolution / Sensitivity
22 Mpixels / ISO 50 the strong gradation this light creates, we place a concave and silver coated
Focal length cardboard (2) behind the object (6).
100 mm
Shutter speed / f-stop
1/2 sec / f 22 A Striplite 60 (3) is placed as low as possible and horizontally above the bottle‘s
cap. Due to the low position, the light of this Striplite has no undesired effect
on the background (read chapter 1.3 The Inverse Square Law).

The concave background finally is lit with a Litestick (4). With its distance to the
table we define the gradations and the contrast. We use the integrated heat
protection to create the dark line between the two highlights.

The lightstick is connected to an independent Scoro pack. We program this

unit with a short delay, maybe ½ sec, so we expose the background ½ sec
later than the main lights - enough time for us to hold a strong soft filter in front
of the lens before we fire the Litestick. This softens the contours of the bottle.

5
3

4
6 2

1 Picolite with projecting attachment

2 Concave mirror
3 Striplite 60
4 Litestick
5 Small acrylic background table 1
6 Frosted bottle Side view

Picolite Projecting attachment Striplite 60 Litestick Scoro A2S Scoro A4S

small lamp for Picolite

35
 Camera type and Medium The distance (d) between the diffuser and the lens defines the amount of black
Large format / slide
you will obtain in the shot.
Resolution / Sensitivity
4/5 inch / ISO 100
Focal length With the angle and the position of your main light (1) you adjust the gradations.
360 mm
The focusing and the distance have a big influence on the contrast of your
Shutter speed / f-stop
1/30 sec / f 32 picture.

The Pulso Spot 4 with 150 mm Projection attachment is used to emphasize

the texture of the black stone. If the Striplite 60 has an unpleasant influence on
the gradations, you have to work with a double exposure. Shoot the lights (1)
and (3) first, then cover the diffuser with black cloth (or remove it) and expose
the Striplite 60.

1 P65 Standard reflector with wide grids 4

on a Pulso G lamp base
2 Striplite 60
d
3 Pulso Spot 4 with 150 mm Projection
attachment and templates
1 7
4 White acrylic plate (matt side towards
the objects)
5 Black stone
3
6 Objects
7 Camera
6
d Distance between the acrylic plate 2
and the lens 5 Side view

Standard Pulso G Honeycomb grids for P65, P45 Striplight 60 Pulso-Spot 4 Optical Snoot 150-mm Grafit A2 Grafit A4
Reflector P65 and PAR, set of 3 pcs. Evolution 5500 K for Pulso-Spot
36
 Camera type and Medium Another strictly diffused illumination.
Medium format with digital back
Resolution / Sensitivity
22 Mpixels / ISO 50 A bare bulb flash head is placed right above the camera and it is directed
Focal length upwards. The banana actually lies on the only spot in the studio where no
120 mm
direct light is hitting.
Shutter speed / f-stop
1/60 sec / f 22

Rather small and movable white walls allow the removal of even the smallest
shadows easily.

Indirect illumination always requires a very high light output. To reach f/22 at
ISO 50, I had to gather the light of two Grafit A4 power packs at 3200 joules
each. A Pulso Twin head (with two flash tubes of 3200 joules each) provided
the total of 6400 joules I needed for this shot.

2 2 2
1

1 Pulso Twin lamp base as bare bulb (no 4

accessories)
2 White walls
3 Object on a white acrylic table (matt 3
side up)
4 Camera Side view

Pulso Twin Grafit A4

37
 Camera type and Medium The Picolite with the narrow grid illuminates the letterhead with the four brand
Large format / slide
names. The sheets in the background are lit from both sides with two standard
Resolution / Sensitivity
4/5 inch / ISO 100 reflectors and grids.
Focal length
300 mm
The small highlight in the left lower corner is achieved with a concave mirror,
Shutter speed / f-stop
1/30 sec / f 5.6 reflecting the light of the standard reflector on the right side (2).

I wanted to expose this high-key product shot with a wide-open lens to get
a very selective focus, and as the object itself is already very bright, I needed
a power pack that allowed work at extremely low settings. A Grafit A2 was
(again) the best choice.

3
1 Picolite with attachment and narrow
grid
2 P70 Standard reflector on Pulso G
4
lamp base and medium grid
3 P70 Standard reflector on Pulso G
lamp base and narrow grid 1
4 Concave mirror As seen from the camera

Standard Pulso G Honeycomb grids for P70, Picolite Attachment with 3 honeycomb grids Grafit A2
Reflector P70 Set of 3 pcs. small lamp and 2 aperture masks for Mobilite /
Picolite
38
 Camera type and Medium The acrylic plate (5) behind the aquarium (6) is lit with two independent light
Large format with digital back
sources: A Pulso G lamp base with a normal reflector (1) and an average sized
Resolution / Sensitivity
22 Mpixels / ISO 100 reflector (e.g. a Softlight reflector P (2)). The P70 (equipped with honeycomb
Focal length grids) is the main light, and shapes the transparent object. As the bottle is only
100 mm
partly below the water level, we have to „extend“ the gradations created by
Shutter speed / f-stop
1/60 sec / f 16 ½ the P70 otherwise we get very wide and dark edges of the bottle where it is
above the water level. The Softlight reflector P is responsible for this extended
gradation.

A Boxlite (3) finally lights the reflective parts of the bottle (the cap) and it also
creates a decent catch light on the glass.

All lights are connected to the same Scoro pack that is set to the shortest
possible flash duration - at the power setting of this shot, a 1/5600 s was
available. This exposure time is by far short enough to freeze the water splash.
(At lower settings t0.1 values as short as 1/8000 s are possible with Scoro.)

1 Pulso G lamp base with P70 and

honeycomb grids 1
2 Pulso G lamp base with 5
Softlightreflector P 4
3 Boxlite 40
4 Black cardboard to cut the light of 7
Boxlite 40
5 Big white acrylic plate 3 6
6 Aquarium (about 70 cm wide)
7 Bottle
8
8 Camera Top view

Standard Pulso G Honeycomb grids for P70, set of Softlight Boxlite 40 Scoro A4S
Reflector P70 3 pcs. Reflector P

39
 Camera type and Medium As the object is transparent, all the lights are placed below or behind it.
Large format / slide
Resolution / Sensitivity
4 × 5 inch / ISO 100 The acrylic table is white and as such, we have to protect it properly from the
Focal length white light of the left side of the Striplite 60. If we do not, all the colors will turn
360mm
out very pale.
Shutter speed / f-stop
1/30 sec / f 8

6 3

2
1 Picolite with Fresnel spot attachment
and blue gel filter 4
2 Striplite 60, the right side with a
turquoise gel filter
3 Pulso Spot 4 with 150 mm spot 5
attachment
4 Small cardboards to limit the amount
of white light falling on the table 1

5 White acrylic with the matt side up

6 Yellow gel filter Side view

Picolite Fresnel spot Striplight 60 Pulso-Spot 4 Optical Snoot 150-mm Grafit A2

small lamp attachment Evolution 5500 K for Pulso-Spot
for Mobilite/Picolite
40
 Camera type and Medium In a first step you place the big softbox (1) behind the object. Choose its
Large format / slide
brightness around 250-250-250 (RGB) or 2.7 f-stops above your aperture to
Resolution / Sensitivity
4 × 5 inch / ISO 100 get a clean white. If you go far above this value, your entire studio will be lit and
Focal length visible in the chrome tap.
480 mm
Shutter speed / f-stop
1/30 sec / f 32 Cut a grey cardboard (2) in the dimensions of your photograph, place it between
the softbox (1) and the object and illuminate it seperately (10). As a result you
get a perfect contours all around the chrome tap. This technique becomes
easier, if you choose a long focal length and a narrow picture angle α.

The Pulso Spot 4 with 150 mm projection attachment and templates illuminates
the running water only. The light does not hit the tap and therefore we do not

1 Pulsoflex C 150 × 150 cm on get a burnt highlight anywhere.

a Pulso G lamp base
2 Dark grey background paper
The rest is comparable to a classic chrome shot (see the cuttlery picture in this
3 Pulsoflex EM 80 × 140 cm on a Unilite
lamp base chapter).
4 P65 Standard reflector with narrow
grid on a Pulso G lamp base
5 Light blue gel filter 11 10
6 White acrylic plate (matt side to the
object) 1
7 Black velvet (to avoid visible reflection 2
of the studio walls in the tap) a 9
8
8 Object
6
9 Camera
10 P70 Standard reflector with medium 5
grid on a Pulso G lamp base 7
3
11 Pulso Spot 4 with 150 mm Projection
4
attachment and templates
α Picture angle Top view

Pulsoflex C Pulso G Unilite Pulsoflex EM Standard Honeycomb grids for P65, P45, Pulso-Spot 4 Optical Snoot 150-mm Grafit A2 Topas A4
150 × 150 80 × 140 Reflector P70 PAR and P70, Set of 3 pcs. 5500 K for Pulso-Spot
41
 2.5 Camera type and Medium
Large format / slide
The Balloon on the left (2) is supporting the available daylight coming through
the skylight (5). The second Balloon is used as a general fill-in.
Resolution / Sensitivity
4 × 5 inch / ISO 100
Focal length The spotlight of the Standard reflector with narrow grid (3) breaks the very
90 mm
even illumination on the walkway and the bare bulb close to the background
Shutter speed / f-stop
1/2 sec / f 11 produces another strong accent.

The warm-tone fluorescent lights are slightly burnt and therefore lose their
color partially.

1
6

3
mixed lights

1 Balloon on a Unilite lamp base

2 Balloon on a Unilite lamp base
3 P70 Standard reflector with narrow 2
grid on a Pulso G lamp base
4 Pulso G lamp base (bare bulb)
5
5 Daylight
6 Fluorescent light (warm-tone) 4
6
7 Camera Top view

Standard Pulso G Unilite Honeycomb grids for P70, Balloon Grafit A4 Verso A2
Reflector P70 Set of 3 pcs.

42
 Camera type and Medium The HMI (1) (800 W from a P65 reflector) illuminates only the back side of the
Medium format with digital back
model. Like this, the front and the face are not affected by this light and remain
Resolution / Sensitivity
39 Mpixels / ISO 200 dark. The background shouldn‘t get any light from the HMI either.
Focal length
120 mm
The flashlight (out of a focussed Para 220 FB) therefore can guarantee an
Shutter speed / f-stop
1/4 sec / f 5,6 ½ absolute sharp picture of the model’s front and face... if the flash duration is
short enough. Here a Scoro A4 set to t0.1 (min) of 1/3000 sec. An additional
narrow softbox (a Pulsoflex EM 40 × 155 cm ) illuminates the model’s front
contours and a P70 with grids brigthens up the model’s face.

By the way: The movement visible in the picture is the “landing” of the model.
Like this, I can shoot when the model has the best position and pose. I do not
have to estimate 1/4 sec before this time and I do not have to deal with any
rear shutter synchronisation and delays.

4
1 HMI 575/800 lamp base with P65 and 1
honeycomb grids 3
M
2 Para 220 FB (focussed)
3 Pulso G lamp base with P70 and
honeycomb grids
4 Pulsoflex EM 40 × 155 cm on a unilite
lampbase
5 Dark grey background
6 Camera
2 6
M Model Top view

Standard HMI 575/800 HMI 575/800 Honeycomb grids for P65, P70 Pulso G Para 220 FB Pulsoflex EM Unilite Scoro A4S
Reflector P65/70 Lamp Base and PAR, set of 3 pcs. 40 × 155
43
 Camera type and Medium From all the open reflectors, the PAR has the highest light output (up to 1 1/2
Medium format with digital back
stops more than a P70). It is the best choice for such a dark and very spacious
Resolution / Sensitivity
22 Mpixels / ISO 50 location.
Focal length
40 mm
If the lamphead (there are three Pulso G lamp bases here) is equipped with
Shutter speed / f-stop
1 sec / f 11 a matt protecting glass, the coverage of the PAR reflector is nicely center-
weighted.

The blue light is daylight and the statue on the right is additionally illuminated
with a tungsten spot.

1 PAR reflector on a Pulso G lamp base

as main light to the ceiling
2 PAR reflector on a Pulso G lamp base
as accent light to the back wall
3 PAR reflector on a Pulso G lamp base
as a fill-in for the foreground
1
4 Camera Top view

Pulso G Reflector PAR Topas A4

44
 Camera type and Medium For the very limited amount of time we had to realize the shoot (45 minutes),
Medium format with digital back
a Balloon was the best choice to illuminate the large location (the lobby of a
Resolution / Sensitivity
22 Mpixels / ISO 50 hotel) quickly. The Balloon limited the contrast of the available daylight and
Focal length brightened the walls in the background.
50 mm
Shutter speed / f-stop
1/30 sec / f 8 An additional softbox (2) was necessary for the black reflector of Para FB.

5 5 4

1 Balloon on a Unilite lamp base

a
2 Pulsoflex C 60 × 100 cm on a Unilite 6
lamp base
3 Atrium with daylight
4 Acrylic table, lit with tungsten 1 7
5 Chairs 2

6 Para 220 FB
7 Camera Top view

Pulsoflex C Unilite Balloon Grafit A4 Verso A2

60 × 100

45
 Camera type and Medium Daylight is underexposed by 1 full stop and acts as a fill-in. To get enough light
Medium format / slide
out of the 1200 joules Mobil power pack, I used a P45 Narrow angle reflector.
Resolution / Sensitivity
6 × 6 cm / ISO 100
Focal length The flash duration of the power pack was not short enough to “freeze” the
80 mm
flying model completely. Therefore, I followed his movement with the camera.
Shutter speed / f-stop
1/250 sec / f 16 The person is absolutely sharp, the background slightly blurred.

The picture was produced in 2003. Today, broncolor offers new power packs
for such jobs – the Verso A2 and A4. These packs provide 1200 (A2) and 2400
(A4) joules at a much shorter flash duration (up to a 1/4500 sec). It is no longer
necessary to move the camera to freeze such a movement (even much faster
objects can be shot absolutely sharp if the camera still follows the movement
of the object or model).

1 P45 Narrow angle reflector on a

Mobilite lamp base
1
2 Sun as backlight, covered by clouds
3 Model
4
4 Camera Front-top view

Narrow angle Mobilite Mobil 2AR

reflector P45 small lamp

46
 Camera type and Medium This photograph shows the seamless background and the “movable sky” of a
Large format / color negative
large rental studio in Switzerland.
Resolution / Sensitivity
4 × 5 inch / ISO 160
Focal length With the two Pulso Flooters I adjusted the two dominant spotlights and the
90 mm
thin shadow at the upper edge of the background. The fill-in is continuous light
Shutter speed / f-stop
1/8 sec / f 11 (daylight through the large door and indirect HMI). The shutter speed therefore
controls the contrast: If the exposure becomes longer, the fill-in light gets
brighter and thus the contrast lower.

4
7

1 Pulso Flooter with a Pulso G lamp

base defocused (horizontal to the white 2
seamless background)
2 Pulso Flooter with a Pulso G lamp
base focused (vertical to the ceiling)
3 800 W HMI indirect as an additional 3
fill-in
4 270 ° seamless white background
5 White “sky” hanging down from the 5
ceiling
6 Daylight
7 Camera 6 Top view

Pulso G Flooter Grafit A4 HMI 575/800 HMI 575/800

Lamp Base

47
Camera type and Medium To shoot reportage about everyday fashion in South Korea, I chose a shady
35 mm DSLR
corner in one of the busiest streets in Seoul. The daylight was slightly under­
Resolution / Sensitivity
8 Mpixels / ISO 100 exposed and the (amateur) models were emphasized with a very dominant
Focal length illumination. Two hard Standard reflectors, one for the strong backlight and the
80 mm
other as a fill-in, were used. The fill-in light was very close to the lens. A single
Shutter speed / f-stop
1/125 sec / f 8 verso A2 power pack provided the energy for both lights.

1 Pulso G lamp base

with P70 standard reflector
2 1
2 Camera
M Model Top view

Standard Pulso G Verso A2

Reflector P70

48
 2.6 Camera type and Medium
Medium format with digital back
The very last sunlight of a perfect autumn day. The low contrast sunlight
entered the forest, shaped the trees and dipped everything in a nice warm
Resolution / Sensitivity
22 Mpixels / ISO 100 light. Even if the sunlight was direct, no additional, artificial light was necessary
Focal length to obtain a reasonable contrast.
120 mm
Shutter speed / f-stop
1/100 sec / f 5.6
available light

49
Camera type and Medium Integrated light meters (and spot meters)
35 mm DSLR
calculate the exposure as if the motive was
Resolution / Sensitivity
8 Mpixels / ISO 100 in an average grey. If we do not correct the
Focal length exposure, bright objects will be underexposed
24mm
and dark motives become too bright.
Shutter speed / f-stop
1/4sec / f 5.6

Here, a single window is illuminating a rather

bright room. If we relied too much on the
integrated light meter, the result would be
underexposure. We have to overexpose
the picture. A completely white wall would
require up to 2½ stops. This photograph is
overexposed by 1½ f-stops and shows the
interior of a design hotel in Portugal.

50
 Camera type and Medium To shoot a group of people with hard lights (e.g. direct sunlight) can be difficult
Medium format / color negative
when there is no additional, artificial light available to control the contrast and
Resolution / Sensitivity
6 × 6 cm / ISO 100 the shadows. To capture the spontaneity, it is very important to shoot fast and
Focal length not to lose a lot of time by setting up additional artificial light first.
80 mm
Shutter speed / f-stop
1/125 sec / f5.6 Therefore, I was very happy to see these pupils sitting in the shadow of a
school’s wall in Karimabad, Pakistan. The warm but hard sunlight was
eliminated; the boys were hit by soft light from the blue sky. With the scanning
of the color negative, I simply had to adjust the color temperature a little bit as
the blue sky dipped everything in a very cold bluish light.

51
Camera type and Medium It was a very wet and stormy day in Patagonia, southern Argentina. Everything
35 mm SLR / slide
was dipped in grey and I had to wait quite some time until the storm dispersed
Resolution / Sensitivity
24 × 36 mm / ISO 100 some clouds. The entry of sunlight partially increased the saturation and the
Focal length brightness dramatically. This wonderful landscape was no longer in a very
135 mm
even, boring and diffused light.
Shutter speed / f-stop
1/125 sec / f 8

52
 Camera type and Medium I shot this gallery below a museum in Rotterdam, The Netherlands. Fluorescent
Medium format / slide
lights that continuously changed their colors lighted it. I just had to wait for
Resolution / Sensitivity
6 × 6 cm / ISO 100 the right moment and had to vary the exposure time. This created even more
Focal length colors because they were “mixed” on the slide during the rather long exposure.
80 mm
Shutter speed / f-stop
Varying from 2 to 8 sec / f 11 to 22

53
 Camera type and Medium It was a very sunny day, difficult to make nice portraits as the sunlight was too
Medium format / color negative
hard. To eliminate the direct light, I asked the man to sit under a wooden roof.
Resolution / Sensitivity
6 × 6 cm / ISO 160 His seat was very close to the opening in order to capture enough light on his
Focal length face, and the eyes showed nice reflections from the bright surroundings. If the
80 mm
face had been too dark, the background would have been far overexposed.
Shutter speed / f-stop
1/125 sec / f 5.6

54
 Camera type and Medium Sunset in the Chilean altiplano at the border to Bolivia. The picture was shot at
35 mm SLR with b/w negative
a 90° angle to the sun, where the skylight is polarized. Because I used a pol-
Resolution / Sensitivity
24 × 36 mm / ISO 100 filter, the sky became heavily graduated and created a mystical atmosphere.
Focal length
20 mm
Shutter speed / f-stop
1/60 sec / f22

55
 Camera type and Medium This boy was standing between stone walls just around sunset. You will notice,
Medium format / color negative
that the upper part of the wall and the boy’s face are still lit with warm and
Resolution / Sensitivity
6 × 6 cm / ISO 160 relatively hard sunlight while the lower part of the wall and the boy’s feet have
Focal length no sunlight anymore. The light there is soft and colder as it is coming from the
80 mm
blue sky.
Shutter speed / f-stop
1/125 sec / f 8

56
 Camera type and Medium
35 mm DSLR
Resolution / Sensitivity
8 Mpixels / ISO 200
Focal length
24 mm
Shutter speed / f-stop
1/20sec (image stabilizer on) / f 5.6

The air on the Atlantic coast of Portugal was very

humid due to the heavy winds and spindrift.
Before sunset, strong sunlight hit the fog and
made almost all the contours of the hills disappear.
Right after sunset however, when this shot was
exposed, the contours of the hills showed more
clearly and the very red hue of the sinking sun
turned neutral again.

57
 Camera type and Medium This salt lake (salar) in Chile is located at about 4500 meters above sea level. Even without polarization, the sky appears very
Scanning camera (HORIZONT), color negative
dark, the colors saturated and the shadows almost black.
Resolution / Sensitivity
24 × 68 mm / ISO 100
Focal length The horizon is curved because I was using a scanning camera of which the lens is rotating around the film. If a camera of this
Comparable to 20 mm when using a 35 mm SLR
type is held horizontally, the horizon becomes flat. If the camera is pointed upwards to the sky, the horizon is concave and if
Shutter speed / f-stop
1/125 sec / f 11 it is directed to the floor (like in this picture) the horizon is convex.
58
 Camera type and Medium I met the shepherd and his flock after a long and rainy day. The clouds were
Medium format / color negative
very low, the light absolutely diffused. To make it more interesting, I stood in
Resolution / Sensitivity
6 × 6 cm / ISO 400 front of a rather dark wall. This reduced the light coming from the camera axis
Focal length and created more contrast.
80 mm
Shutter speed / f-stop
1/60 sec / f 5.6

59
Camera type and Medium The very first sunlight after a very cold night on a geyser-field in Northern
35 mm SLR / slide
Chile. The low sun perfectly structured the deposits of minerals and columns
Resolution / Sensitivity
24 × 36 mm / ISO 100 of steam created some nice and low contrast shadows.
Focal length
20 mm
Shutter speed / f-stop
1/60 sec / f 11

60
the lightshapers
3.1 Lightshapers And Their Characteristics
Open reflectors: Fresnel spots:
These are available in different diameters and depths. Larger diameters and shorter reflectors have Here the light is collimated and projected through a focusable Fresnel lens. The light angle can be
a rather wide light angle and are rather soft. Deep and narrow reflectors focus the light and provide varied and the shadows are very sharp. The coverage is more even and the edge-transfer harsher
a brighter light over large distances. Honeycomb grids are available for all open reflectors. They than the light of an open reflector with grids.
reduce the light angle and therefore increase the shadow contrast and color saturation. Pulso Flooter, Pulso Spot 4, Fresnel spot attachment for Picolite
P70, P65, P45, P50, P120, P travel, Softlight reflector P- Soft, PAR reflector
(The number following the “P” indicates the light angle) Optical systems:
Optical lenses allow sharp projection of any form, mask (gobo) or even slides on a background or
Softboxes: object. The light angle (and therefore the size of the projection) can sometimes be adjusted (e.g.
Softboxes are available with (Pulsoflex EM) or without (Pulsoflex C) integrated barn doors, which Profil 15/42. The coverage is even, and the edge transfers razor-sharp. The shadows are very dark
slightly reduce the light angle. The light becomes more controllable as it can be directed (e.g. away and highly defined.
from the background or the lens). The shadows get darker and the saturation is higher. Pulso Spot 4 with 150 mm Optical snoot, Projection attachment for Picolite, Profil 15/42
The edge transfer of a Pulsoflex C is smooth while the light of an EM falls off rather sharply.
Honeycomb grids are available not only for open reflectors but also for some softboxes. They give Boxlites, Striplites:
a ‘spot-type’ circular light but without the harshness of a spot lamp. For many applications it is important for light sources to match subjects size for size. And when we
Pulsoflexes C and EM want a reflection not to be burnt out but to show details, it is better if we use a “clean” acrylic area
light than a textile softbox. Both these requirements are fulfilled with all the Boxlites, Striplites and
Umbrellas: Lightbars. Additionally they are very evenly illuminated.
Umbrellas can be made from different materials: Silver coating gives a rather strong, directed light; Striplite 60 and 120, Lightbar 60 and 120, Boxlite 40, Picobox for Picolite.
white and transparent umbrellas are softer and lower in contrast. To limit scattered light as much as
possible, umbrellas should be used in combination with special reflectors. Nevertheless it is very Effect lamps: Satellite Evolution and Mini-Satellite:
important, that we do not place the camera where direct light from the flashtube can reach the lens. Their light is comparable to a huge Fresnel spot. But because of their size, it is a lot softer. Used
Otherwise we have to place a black flag between the two. over long distances, the light is almost completely parallel and a very good simulation of natural
Silver, white and transparent umbrellas sunlight. The two Satellites are the most powerful lightshapers in the broncolor system.

Large area lights: Satellite Staro:

Huge lights such as Cumulite 2 and Megalite are used to get big and homogeneous reflections (e.g. A round “softbox” with a strong hotspot. It is therefore a perfect fashion and beauty light: Big
car photography) or diffused overall lights (e.g. furniture). When they consist of multiple flash heads, and soft enough to illuminate a face or a body softly, yet hard enough to work out the structure of
the power can be set individually for every single head and the result is a big graduated light source textiles and skin due to its smaller hotspot.
that enables interesting illuminations for food, fashion and beauty set-ups.
Hazylight-Soft, Mini-Cumulite, Cumulite 2, Megalite
62
Balloon:
An all-over light with a light angle of 360 degrees. Perfect for location and with our knowledge
about the inverse square law, we can carefully balance direct and indirect light and adjust our
contrast with only one light.

Para FB:
Worth a book on its own! Available in 3 diameters: 170, 220 and 330 cm. A very complex lighting
system: The most important parameter to change the light characteristics of Para FB is the position
of the lamp base inside the reflector. When it is focused (the lamp head is deep inside), the light is
almost completely parallel, comparable to a huge spot; but for the size of Para FB, the light is still
soft.
When the lamp base is further away from the center of the reflector and about on the level of the
opening, we call it defocused. As the coating of Para FB is highly shiny, the center does not reflect
any light in this situation and the result is extraordinary: The “flat” lights from the reflector’s center
are missing and therefore the forms and shapes of every object or body are beautifully emphasized!
24 small and hard reflections (one for each segment of the reflector) in a huge ring, wrap the entire
set-up in a crispy cloud of soft, three-dimensional light.
The distance and the angle are two more possibilities to adjust the light very precisely. And last but
not least there are three diffusers with different densities available for every size of Para FB. All this
makes Para FB not just another lightshaper, but a complete lighting system!

Ringflash C:
A special lightshaper known for many years already. In the past, the light of the Ringflashes was
not very variable. The illumination was more or less even, and may be slightly center-weighted.
With the new broncolor Ringflash C and the possibility to use it with honeycomb grids, we now
have full control over the light angle. From slightly or heavily center-weighted to spot-like coverage,
everything is possible, but the illumination that is unique to the Ringflash remains in all situations.

The Ringflash is also an outstanding fill-in light. Always very close to the camera (even when this is
moved), it reaches even the most hidden places in our set-up. It is small and hard and therefore it
shows the texture of the object perfectly, even in the deepest shadows.
63
 Power Packs

MonoLights

Reflectors are not included

Battery unit
Topas A2 RFS
31.173.XX
Scoro A4S Scoro A4 Grafit A2 RFS Verso A2 RFS Topas A4 RFS Nano 2
31.043.XX 31.042.XX 31.169.XX 31.031.XX 31.174.XX 31.151.XX
Scoro A2S Scoro A2 Grafit A4 RFS Verso A4 RFS Power Dock Mobil A2R Topas A8 Evolution RFS­ Nano A4 Minicom 40 / RFS Minicom 80 / RFS Minipuls C200 Powerbox 900
31.041.XX 31.040.XX 31.179.XX 31.033.XX for Verso A2 / A4 RFS 31.011.XX 31.183.XX 31.172.XX 31.405.XX / 31.406.XX 31.415.XX / 31.416.XX 31.449.XX 56.302.00
36.124.00

Effect lamps
LampS

Reflectors are not included

Special Accessories
Transmitter RFS
36.130.00
broncolor system

Transceiver RFS
36.131.00
Picolite
small lamp
Pulso G Unilite 32.021.XX Ringflash C Lightbar 120 ­Evolution Striplite 120 ­Evolution
32.115.XX 1600 J 32.113.XX 1600 J Mobilite 2 32.462.XX 32.353.XX 32.303.XX
Pulso G Unilite Pulso Twin Pulso 8 small lamp Ringflash P Litestick Balloon Boxlite 40 Picobox Lightbar 60 ­Evolution Striplite 60 ­Evolution Hazylight-Soft broncolor Flooter Pulso-Spot 4 Infrared transmitter IRX 2
32.116.XX 3200 J 32.114.XX 3200 J 32.117.XX 32.118.XX 32.012.00 32.461.XX 32.451.00 33.161.00 32.341.XX 33.128.00 32.351.XX 32.301.XX 33.513.00 32.431.00 32.425.XX 36.116.00
Reflectors and Attachments

Honeycomb grids for Ringflash C, set of 3 pcs.

33.219.00
Honeycomb grids for Power reflector, set of 3 pcs.
Standard reflector P65 Reflector P-Travel Reflector PAR UV attachment Power reflector Beauty reflector Soft reflector Optical snoot 150 mm Pulso adapter Projection attachment Barn door with 4 wings Barn door with 4 wings 33.189.00
33.106.00 33.103.00 33.113.00 33.626.00 for Ringflash C for Ringflash C for Ringflash C 5500 K for Pulso-Spot 4 for Mobilite 2 / Picolite for Picolite for P65, P45 and PAR for ­Mobilite 2 / Picolite
Standard reflector P70 33.125.00 33.124.00 33.123.00 33.620.55 33.501.00 33.641.00 33.246.00 33.244.00
33.107.00 5900 K Barn door with 4 wings
33.620.59 for P70
33.247.00

Honeycomb grids for P50, set of 3 pcs.

33.205.00
Honeycomb grids for P65, P45 and PAR,
Narrow angle reflector P45 set of 3 pcs. extra narrow
33.104.00 Wide angle Background Attachment with 3 honey comb grids and Fresnel spot attachment Barn door with 33.206.00 33.211.00
Narrow angle reflector P50 Softlight reflector P Beauty Dish with textile diffusor reflector P120 reflector Spot attachment Conical snoot 2 aperture masks for Mobilite 2 / Picolite for Mobilite 2 / Picolite 2 wings for P70 Sunlite-Set Honeycomb grids for P70, set of 3 pcs.
33.105.00 33.110.00 33.111.00 33.112.00 33.114.00 33.640.00 33.120.00 33.204.00 33.631.00 33.227.00 33.162.00 33.207.00

Complete product overview on our website

Adapter ring and stands
are not included
Special Reflectors

Softboxes

Umbrellas
Stands are not included
Pulsoflex C Pulsoflex C Pulsoflex C Pulsoflex C Pulsoflex C Pulsoflex C
35 × 120 cm 60 × 100 cm 70 × 70 cm 80 × 140 cm 100 × 100 cm 150 × 150 cm
(14 × 48”) (24 × 40”) (28 × 28”) (32 × 56”) (40 × 40”) (60 × 60”)
33.444.00 33.443.00 33.441.00 33.446.00 33.442.00 33.445.00

Umbrella silver ∅ 82 cm (32.3”) Umbrella reflector

33.459.00 33.496.00
Umbrella silver ∅ 102 cm (40.2”)
33.452.00
Umbrella transparent ∅ 102 cm (40.2”)
33.454.00
Umbrella white ∅ 82 cm (32.3”)
33.460.00
Umbrella white ∅ 102 cm (40.2”)
Pulsoflex EM Pulsoflex EM Pulsoflex EM Pulsoflex EM Pulsoflex EM Pulsoflex EM Pulsoflex EM Pulsoflex EM 33.453.00
30 × 110 cm 35 × 60 cm 40 × 155 cm 50 × 50 cm 55 × 95 cm 80 × 140 cm 80 × 80 cm 110 × 110 cm
Satellite Staro
33.151.00
Satellite­­Evolution
33.150.00
Mini-­Satellite
33.152.00
Para 170 FB
33.484.00
Para 220 FB
33.485.00
Para Soft 220 FB
33.487.00
Para Soft 220 FB
33.487.00
(12 × 44”)
33.424.00
(14 × 24”)
33.415.00
(16 × 62”) (20 × 20”) (22 × 38”) (32 × 56”)
33.417.00
(32 × 32”)
33.407.00
(44 × 44”)
33.408.00
www.broncolor.com
33.425.00 33.406.00 33.416.00
Profile of Urs Recher

1967 Born in Basel, Switzerland

1983 – 86 Attended high school in Muttenz, Switzerland

1987 – 89 Study of mathematics and physics at the University of Zürich,

Switzerland

1989 – 93 Apprenticeship in photography at the School of Arts and the

Studio Heusser+Hertig in Basel, Switzerland

1993 Received certificate in photography of the School of Arts,

Basel

1994 – 96 Independent photographer in Santiago de Chile, Chile

1996 – 98 Independent photographer and freelance assistant in

Switzerland and The Netherlands

since 1998 Photographer and consultant at Bron Elektronik AG,

Switzerland

since 1997 Married to Debby and

in 2000 Daughter Anouk was born

65
© Urs Recher photography 2011