Scribd
Upload
971 views

Industry Oriented Mini-Project Report On Solidworks

The document summarizes an internship report submitted for a Bachelor of Technology degree in Mechanical Engineering. It describes a 6-week internship with Internshala learning SolidWorks software under the guidance of trainer Tayseer Almattar. Key topics covered included interface and sketching, 2D and 3D modeling, applying features and materials, assemblies, and drawings. As a final project, the intern designed an air piston-cylinder assembly. Outcomes of the internship were learning to create and modify 3D models of parts, generate assemblies, produce engineering drawings, and basics of portfolio building.

Uploaded by

Nikhilraj rudra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
971 views

Industry Oriented Mini-Project Report On Solidworks

The document summarizes an internship report submitted for a Bachelor of Technology degree in Mechanical Engineering. It describes a 6-week internship with Internshala learning SolidWorks software under the guidance of trainer Tayseer Almattar. Key topics covered included interface and sketching, 2D and 3D modeling, applying features and materials, assemblies, and drawings. As a final project, the intern designed an air piston-cylinder assembly. Outcomes of the internship were learning to create and modify 3D models of parts, generate assemblies, produce engineering drawings, and basics of portfolio building.

Uploaded by

Nikhilraj rudra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 14

INDUSTRY ORIENTED

MINI-PROJECT
REPORT ON
SOLIDWORKS

INTERNSHALA-SOLIDWORKS
UNDER THE GUIDANCE OF
TAYSEER ALMATTAR
SOLIDWORKS TRAINER
INTERNSHALA

Submitted by

S. NIKHIL RAJ RUDRA

17311A03D2

Department of Mechanical Engineering


CERTIFICATE

This is to certify that the project work entitled “INTERNSHALA-


SOLIDWORKS“ being submitted by S. Nikhil Raj Rudra
(17311A03D2), for the partial fulfilment of the requirement for the
award of ‘Bachelor of Technology’ in Mechanical Engineering to the
Jawaharlal Nehru Technological University Hyderabad (JNUTH),
Kukatpally, Hyderabad, this is a record of bonafied work carried
out under my guidance and supervision.

Supervisor Head of the Department


DR A. PURUSHOTHAM Dept. of Mechanical
Engineering
Professor in Mech.Engg.

External Examiner
SREENIDHI INSTITUTE OF SCIENCE AND TECHNOLOGY
(An autonomous institute under JNTUH) Yamnampet, Ghatkesar (M),
Hyderabad – 501301, TS

2
ACKNOWLEDGEMENT

We would like to express our sincere gratitude to INTERNSHALA for


the enormous opportunity they presented us to learn about the topic. The
depth of knowledge and experience they put at our disposal is the most
sincerely appreciated. We have gained such valuable knowledge and
experience while working there.

We are grateful to TAYSEER ALMATTAR, SOLIDWORKS Trainee and


INTERNSHALA for their valuable inputs on fabrication of practicing,
explaining, testing and control aspects.

In our association with all the above persons we experienced not only
their expert guidance and continuous encouragement which led to the
success completion of our project.

S. Nikhil Raj Rudra

(17311A03D2)

3
CONTENTS:

1.Solidworks - 5
2.About the Internship - 5
3.Topics Covered - 6
4.Designs - 6
5.Project - 8
6.Internship Outcomes - 9

4
SOLIDWORKS:
The Solidworks software is a mechanical design
automation application that lets designers quickly
sketch out ideas, experiment with features and
dimensions, and produce models and detailed drawings.
 Parts are the basic building blocks in the
Solidworks software. Assemblies contain parts or
other assemblies, called subassemblies.
 A Solidworks model consists of 3D geometry that
defines its edges, faces, and surfaces.
 The Solidworks software lets you design models
quickly and precisely.

About the Internship:

Company : INTERNSHALA
Course : Solidworks
Course Duration : 6 Weeks (17th AUG – 20th SEP)
Training Platform: Online
Trainer : Tayseer Almattar

5
Topics Covered:
 Interface and Sketching
 2-D & 3-D Modeling
 Applying Features and Material
 SolidWorks Assembly
 SolidWorks Drawing
 Final Project Air Piston-Cylinder Assembly

Designs Done During Internship:

6
7
8
9
10
11
Project:
Air Piston-Cylinder Assembly

12
Internship Outcomes:
1. Create 3-D Models of Engineering
Parts.
2. Edit or Modify the parts as per the
Requirement.
3. Generate Assemblies.
4. Generate standard engineering
Drawings.
5. Basics of Portfolio Building.

13
14

You might also like