Midterm Exam Statics of Rigid Bodies
Midterm Exam Statics of Rigid Bodies
A. 563.2 N
B. 517.5 N
C. 556.3 N
D. 568.9 N
A. 568.9 N
B. 563.2 N
C. 517.5 N
D. 556.3 N
A. 500 N
B. 540 N
C. 520 N
D. 530 N
Situation 2 – The hook shown in the Figure is subjected to three forces A, B, and C. Force B=4.5 kN,
force A=6 kN, and angle α=30°.
4. Calculate the value of angle θ if the resultant of the three forces is 5.5 kN along the y-axis
A. 30.4°
B. 36.6°
C. 32.8°
D. 34.1°
A. 7.24 kN
B. 6.24 kN
C. 8.12 kN
D. 6.88 kN
Situation 3 – The weight W shown in the Figure is supported by cables AB and AC. In this problem
x1=50 m, x2=70 m, and d=15.5 m.
7. Compute the maximum value of “W” if the tension in the cable must not exceed 195 kN.
A. 98.98 kN
B. 92.54 kN
C. 85.63 kN
D. 90.24 kN
A. 172.56 kN
B. 160.52 kN
C. 163.82 kN
D. 167.46 kN
A. 124.04 meters
B. 128.54 meters
C. 112.47 meters
D. 126.05 meters
Analysis of Structures
Method of Joints
Situation 4 – A load of W=30 kN is lifted by the boom BCD which makes an angle of 60° with the
vertical as shown in the figure. The pulley is frictionless. Neglect the weight of the boom.
10. Which of the following most nearly gives the angle θ between the cables AC and AD?
A. 60°
B. 30°
C. 45°
D. 35°
11. Which of the following most nearly gives the tension in cable AC?
A. 54.77 kN
B. 25.36 kN
C. 42.43 kN
D. 53.49 kN
12. Which of the following most nearly gives the reaction at B?
A. 25.36 kN
B. 53.49 kN
C. 42.43 kN
D. 54.77 kN
Method of Sections
A. 1,324.80 kN
B. 1,131.97 kN
C. 811.01 kN
D. 688.29 kN
14. Which of the following most nearly gives the force in member AH?
A. 2,910.48 N
B. 2,678.47 N
C. 3,115.81 N
D. 2,318.29 N
15. Which of the following most nearly gives the force in member DJ?
A. 2,299.87 N
B. 1,540.43 N
C. 640.00 N
D. 1,083.62 N
A. 5.82 N
B. 19.18 N
C. 10.00 N
D. 15.29 N
17. Which of the following most nearly gives the force in member CD?
A. 10.00 N
B. 19.18 N
C. 15.29 N
D. 5.82 N
18. Which of the following most nearly gives the force in member FG?
A. 5.82 N
B. 15.29 N
C. 10.00 N
D. 19.18 N
Situation 7 – The transmission tower is subjected to lateral forces as shown in the figure.
A. 9.2 kN
B. 18.5 kN
C. 15.0 kN
D. 7.9 kN
A. 9.2 kN
B. 17.6 kN
C. 15.0 kN
D. 11.8 kN
A. 5.35 kN T
B. 5.35 kN C
C. 3.85 kN T
D. 3.85 kN C
22. Find the force in member BC and indicate whether in tension, T, or compression, C.
A. 7.0 kN (T)
B. 14.0 kN (C)
C. 17.4 kN (T)
D. 21.0 kN (C)
A. 34.8 kN (T)
B. 7 kN (C)
C. 14.0 kN (T)
D. 3.4 kN (C)
A. 14.0 kN (T)
B. 21.2 kN (C)
C. 35.9 kN (C)
D. 10.4 kN (T)
Situation 9 – Refer to the figure below. Diagonals BG, CF, CH, and DG are flexible cables.
A. 2.4 kN
B. 1.4 kN
C. 0.8 kN
D. 2.0 kN
A. 2.0 kN
B. 0.5 kN
C. 1.0 kN
D. 1.4 kN
A. 2.4 kN
B. 1. 0 kN
C. 1.4 kN
D. 2.0 kN
Method of Members
Situation 10 – A load of 6 kN is supported as shown in the figure. The weight of the pulley is 2 kN.
Neglect the weight of the bars.
A. 8.49 kN
B. 10.00 kN
C. 12.62 kN
D. 15.00 kN
29. Which of the following most nearly gives the reaction at C?
A. 29.65 kN
B. 37.61 kN
C. 24.16 kN
D. 33.40 kN
30. Which of the following most nearly gives the angle that the reaction at C makes with the
horizontal?
A. 19.68°
B. 24.81°
C. 22.85°
D. 16.18°
31. Which of the following most nearly gives the reaction at the right support?
A. 7.22 kN
B. 5.89 kN
C. 16.29 kN
D. 4.17 kN
32. Which of the following most nearly gives the reaction at the left support?
A. 16.29 kN
B. 4.17 kN
C. 5.89 kN
D. 7.22 kN
33. Which of the following most nearly gives the reaction at the internal hinge?
A. 7.22 kN
B. 5.89 kN
C. 16.29 kN
D. 4.17 kN
Situation 12 – The figure shows a portable seat braced by a cable FG. The permissible tension in the
cable is 1,800 N. Surfaces C, D, and E are frictionless.
A. 600 N
B. 1,200 N
C. 2,400 N
D. 1,800 N
A. 1,200 N
B. 200 N
C. 500 N
D. 800 N
A. 800 N
B. 1,200 N
C. 1,000 N
D. 1,600 N