Scribd
Upload
9 views

EPM 2200 Modbus Mapping

The document describes several data blocks for an electricity meter including identification, readings, energy, demand, minimums, maximums, phase angle, status, resets, programming, commands, encryption, and setups blocks.

Uploaded by

Gerardo Ramirez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

EPM 2200 Modbus Mapping

The document describes several data blocks for an electricity meter including identification, readings, energy, demand, minimums, maximums, phase angle, status, resets, programming, commands, encryption, and setups blocks.

Uploaded by

Gerardo Ramirez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Identification Block

read-only

Primary Readings Block, 6 cycles (IEEE Floating read-only


Primary Energy Block
read-only

Primary Demand Block (IEEE Floating Point)


read-only

Primary Minimum Block (IEEE Floating Point)


read-only
Primary Maximum Block (IEEE Floating Point)
read-only
Phase Angle Block14 read-only

Status Block
read-only

Resets Block9 write-only

Meter Programming Block read/conditional write

Other Commands Block read/write


Encryption Block
read/write

Basic Setups Block write only in PS update


mode
12-Bit Block read-only except as
noted

You might also like