Scribd
Upload
274 views

Lashing Lug Round Bar Design: 1. General

This document provides the design details for a round bar used to support local loads up to 7 metric tons. The bar has a diameter of 5.5 cm and is made of steel with a yield strength of 24.5 kN/cm^2. Calculations show the maximum bending moment on the bar is 231 kN-cm, resulting in a bending stress of 14.1 kN/cm^2, which satisfies the allowable stress criteria. Shear and deflection checks were also performed and found to be within allowable limits.

Uploaded by

innovativekarthi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
274 views

Lashing Lug Round Bar Design: 1. General

This document provides the design details for a round bar used to support local loads up to 7 metric tons. The bar has a diameter of 5.5 cm and is made of steel with a yield strength of 24.5 kN/cm^2. Calculations show the maximum bending moment on the bar is 231 kN-cm, resulting in a bending stress of 14.1 kN/cm^2, which satisfies the allowable stress criteria. Shear and deflection checks were also performed and found to be within allowable limits.

Uploaded by

innovativekarthi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

PROJECT

NAME
LASHING LUG ROUND BAR DOCUMENT
DESIGN NAME

DOCUMENT
NUMBER
Round bar design for local check (Capacity upto 7mT)

1. General:
The secondary beam design due to equipment and / or uniform load are performed
according to API RP 2A(WSD)
The structure frame refer to the corresponding main structural drawing.
a2 P2

a1 P1

L
2. Design Condition:
Uniform load Q = 0.023 kN/cm
(including plate, live load & beam weight)
Concentrate load1 P1 = 68.67 kN
Concentrate load 1 position a1 = 6.7 cm
Concentrate load2 P2 = 0 kN
Concentrate load 2 position a2 = 0 cm
Beam span L = 13.4 cm
Young's Modules E = 20500 kN/cm2

3. Dimension and Materials:


a)Beam Properties Φ 55 mm Round Bar

Dia of the Round Bar D = 5.5 cm


Area of the Round Bar Ab = 23.75827 cm2
Y-Y axial position, h/2 yc = 2.75 cm
Inertia moment in Y-Y Iy = 45 cm4
Section Module in Y-Y Sy = 16 cm3
Yield stress Fy1 = 24.5 kN/cm2

4. Beam Calculatuion:
Modify Factor = 1.0
a)Beam stress check:
Bending moment at point C Mc = 231 kN-cm
(Mc= Q*a1(L-a1)/2+P1*(L-a1)*a1/L+P2*(L-a2)*a1/L)
Bending Mmoment at point D Md = 460 kN-cm
(Md= Q*a2(L-a2)/2+P1*(L-a2)*a1/L+P2*(L-a2)*a2/L)
PROJECT
NAME
LASHING LUG ROUND BAR DOCUMENT
DESIGN NAME

DOCUMENT
NUMBER
Bending at mid span,Q x L2 /8 + (P1 x a1 x (L-a1))/2 Mm = 231 kN-cm
Maximum Bending moment M = 231 kN-cm
Beding stress, fb = M/Sy fb = 14.1 kN-cm2
Allowable bending stress, 0.66 x Fy Fb = 16.2 kN-cm2
Nominal stress check, fb/Fb = 0.873 <=1, ok

b)Shear stress check:


Reaction force at point A, Ra = 34.5 kN
Ra=Q*L/2+P1*(L-a1)/L+P2*(L-a2)/L
Reaction force at point B, Rb = 34.5 kN
Rb=Q*L/2+P1*a1/L+P2*a2/L
Maximum shear stress, max(Ra,Rb)/web area fs = 1.5 kN/cm2
Allowable bending stress, 0.4 x Fy Fs = 9.8 kN/cm2
Nominal stress check, fs/Fs = 0.148 <=1, ok

c)Beam deformation check:


Allowable deformation, Da=L/240 Da = 0.1 cm
4
Maximum deformation for Q, Dq=5 x Q x L / 384(E*Iy) Dq = 0.000 cm
Maximum deformation for p1,
Dp1=P1*a1/(3*E*Iy*L)*((L2-a12)/3)1.5 Dp1 = 0.004 cm
Maximum deformation for p2,
Dp2=P2*a2/(3*E*Iy*L)*((L2-a22)/3)1.5 Dp2 = 0.000 cm
Maximum deformation on beam
D= Dq+Dp1+Dp2(conservative consideration) D = 0.004 cm
Deflection Check, D/Da = 0.067 <=1, ok
Beam Self Weight (Φ36) = 8 kg/m
Beam Length = 0.134 m
Total Beam Weight = 1.072 kg
= 0.010516 kN

Plate Thick = 0 mm
Plate Width = 0m
Plate Length = 0m
Total weight = 30 kg
= 0.2943 kN

Live Load = 0 kN/m2


Width = 0m
Length = 0m
Total Weight = 0 kN

Total Weight = 0.304816 kN


Beam Length = 13.4 cm

Weight/Unit Length = 0.022747 kN/cm

You might also like