Scribd
Upload
155 views

M1 195 C195 AO34-4-07-X00-MC-0-DD-S164: (MM) (MM) (MM) (MM) (MM) (MM)

This document provides design calculations to check the adequacy of a web connection between a beam and column. It details the beam and column dimensions, material properties, and applied forces. It then performs calculations to check for web yielding, web crippling, and side sway buckling. The results indicate the web is adequate to resist the applied loads with safety factors above required minimums.

Uploaded by

innovativekarthi
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
155 views

M1 195 C195 AO34-4-07-X00-MC-0-DD-S164: (MM) (MM) (MM) (MM) (MM) (MM)

This document provides design calculations to check the adequacy of a web connection between a beam and column. It details the beam and column dimensions, material properties, and applied forces. It then performs calculations to check for web yielding, web crippling, and side sway buckling. The results indicate the web is adequate to resist the applied loads with safety factors above required minimums.

Uploaded by

innovativekarthi
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

TEPA.Ref.

:
AO34-4-07-X00-MC-0-CN-L150
Rev.Code: 00 State: UE
ROSA-LIRIO Project Group Rev.Date: 30-Nov-04 Doc.Type: 5B
AM-TO-BEAM TYPE 'PGTA' EQUAL DEPTH CONTRACTOR Ref : S14044
ROSA DEVELOPMENT - FPSO MODIFICATIONS 046626
MODULE m1 – CONNECTION DESIGN Page: C195 Disc.: STR

Check for Web Yielding & Crippling: (ASD SPEC. SEC K1.3 / K1.4)

MODULE: M1
N2+5K

CONNECTION No.: 195 K

DATE: C195

REF. DRAWING: AO34-4-07-X00-MC-0-DD-S164 N1+2.5K

N1,N2 = LENGTH OF BEARING OR CONC. LOAD


BEAM: K = DIST. FROM OUTER FLANGE TO WEB TOE
H (mm) 270
Bf (mm) 280
tw (mm) 8
tf (mm) 13
N1 (mm) 11
N2 (mm) 11
K (mm) 24
h (mm) 254
dc (mm) 206
Lb (mm) 3800
fy_beam (N/mm²) 345

Column (or) Brace:


Dia (mm) 152.4 Lb = Largest unbraced length of flange.
Thickness (mm) 9.525 dc = Clear distance between flange fillets .
Angle a (Deg) 90 h = Clear distance between flanges.
fy_beam (N/mm²) 345

TOTAL VERTICAL 0.00 KN


FORCE:

Web yielding Check:


Max. allowable end reaction = 129.33 KN PASS
Max. allowable Conc. Load at interior pt. = 238.63 KN PASS

Web Crippling Check:


Max. allow. load at dist. >= H/2 , = 284.61 KN PASS
Max. allow. load at dist. < H/2 , = 143.36 KN PASS

Side Sway Web Buckling Check: ( AISC: Eqn.K1-7, Flange Not Restrained for rotation)

Max. allowable Conc. Load = NOT REQD

Web is adquate
Contact Area

Lbta ,Lbtb =

You might also like