0% found this document useful (0 votes)
97 views1 page

Kemapox HF 366: Product Information

The document provides product information for KemaPox HF366, a high chemical resistant hardener recommended for solvent-free mortars, adhesives and coatings. It lists the hardener's properties including viscosity, density, color index, and typical mix properties when combined with epoxy resin. Storage and handling precautions are also noted.

Uploaded by

Amr Ragab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
97 views1 page

Kemapox HF 366: Product Information

The document provides product information for KemaPox HF366, a high chemical resistant hardener recommended for solvent-free mortars, adhesives and coatings. It lists the hardener's properties including viscosity, density, color index, and typical mix properties when combined with epoxy resin. Storage and handling precautions are also noted.

Uploaded by

Amr Ragab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CHEMICALS AND TECHNOLOGIES FOR POLYMERS (S.A.

E)

Product Information

KemaPox® HF 366

Description : Mannich-base, solvent-free

Fields of application KemaPox HF366 is a high chemical resistant hardener


Properties recommended for mortars , adhesives and coatings for solvent-free
systems where high chemical resistance against acids , alkalis and
solvents is required.

Specification Viscosity at 23 °C app 1500 mPas DIN 53214


app 30 sec 8mm cup DIN 53211
Density at 23 °C 1,00 g/cm³ DIN 51757,T3
Color index <5 Gardner

Characteristic data H*-equivalent mass 65


Solids content 100 %
Flash point >100 °C DIN-ISO 3679

Typical mix properties Mix Of 38 gms with 100 gm epoxy resin *


Initial viscosity app.140 sec 4mm cup; DIN 53211
app 1100 mPas DIN 53214
Pot life app.18 min from 23 to 40°C for 100 ml
min. curing temp. app.8 °C
Shore D 85 ISO 868-1985

Storage life: It is at least 24 months, at room temperature in the original sealed


containers, from the date of manufacture.

Handling Precautions:
Please refer to the Safety data sheet of this product.

* tests performed with KemaPox RL 215

The information provided herein is considered to be representative of our production, and is to the best of our knowledge accurate and according
to our laboratory tests and data which we believe to be reliable. This does not construe in any way any liability or responsibility from our part for
any third party since the conditions of use are beyond our control and each user should perform sufficient investigation to establish the full
suitability of our products for its intended use .Furthermore no information provided here should be taken as a recommendation or advice for
infringement of third party intellectual property rights.

TI HF366 05-06 Ver. 05

43,El Haram St. Giza P.O. Box 217 Tel: +202 33880640 /41 Fax: +202 33860174 Cairo ,Egypt e-mail: [email protected]

You might also like