Scribd
Upload
25 views2 pages

Engg Work Shop

Uploaded by

Chigullapally Sushmitha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
25 views2 pages

Engg Work Shop

Uploaded by

Chigullapally Sushmitha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
Procedure: - 1. The burrs in the pieces are removed and the dimensions are checked with a stel rule 2 The pieves are clamped one after the other and th ir r ; : ns i Outer mating edges are filed by using rough and The flatness, straightness and With help of Try-square. 4. Chalk is then applied on the surfaces of the two pieces, The g ven dimensions of the V- Hing are marked with help of vernier height gauge carefully & Using the dot punch, dots are punched along the above scribed lines, 7. Using the hack saw, the unwanted portions are removed, 8 Using the flat chisel, the unwanted material in the piece Y is removed. 9. The cut edges are filed by the half round file. 10, The comers of the stepped surfices are filed by using a square or triangular file to get the sharp comers. II. The pieces (X and Y) are fitted together and the mating is checked for the correctness of the fit. Safety precaut }. Care is taken to see that the marking dots are not crossed, which is indicated by the half of the punch dots left on the pieces. 2. Apply pressure in forward direction during hack sawing, 3. Don’t rub steel rule on the job, 4. Fix blade in hack saw frame with correct tension, 5., During hack sawing the coolant like water or lubricating oil isto be used * Bea F 6, {Use precision instruments lke vere calipers and vemier height gauge carefully, Files are to be cleaned properly after using. Result: - V- fits made as per the required dimensions.

You might also like