Sri Chaitanya IIT Academy., India.
AP, TELANGANA, KARNATAKA, TAMILNADU, MAHARASHTRA, DELHI, RANCHI
A right Choice for the Real Aspirant
ICON Central Office , Madhapur – Hyderabad
Sec: Sri Chaitanya-Jr.Chaina-I Date: 29-09-19
Time: 09:00 AM to 12:00 Noon Max.Marks:198
Name of the Student: ___________________ I.D. NO:
2012_PAPER-II
29-09-19_Sri Chaitanya-Jr.Chaina-I_Jee Adv_WTA-15_Syllabus
Mathematics : 3D-Geometry: Distance Formula, Section formula, Direction Ratio and
direction cosines of a line, Angle between two lines, Angle between line
and plane, D.Cs and D.Rs of angular bisectors of two lines
Physics : FLUID STATICS: Definition of fluid, Ideal fluid, Density, Relative density
(Specific gravity), Hydro static pressure in a fluid, Variation of pressure
with depth, Atmospheric pressure, Barometer, Mano meter, Vacuum
pressure, Gauge pressure, Absolute pressure, Free surface of a Fluid, Pascal's
law, Hydraulic lift, Force on a surface in contact with the liquid (plane surface,
curved surface), Accelerating, rotating containers
Chemistry : Solid State
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
JEE-ADVANCE-2012-P2-Model
Time: 3:00hours IMPORTANT INSTRUCTIONS Max Marks: 198
PHYSICS:
+Ve - Ve No.of Total
Section Question Type
Marks Marks Qs marks
Sec – I(Q.N : 1 – 8) Questions with Single Correct Choice 3 -1 8 24
Questions with Comprehension Type
Sec – II(Q.N : 9 – 14) 3 -1 6 18
(3 Comprehensions : 2+2+2 = 6Q)
Sec – III(Q.N : 15 – 20) Questions with Multiple Correct Choice 4 0 6 24
Total 20 66
CHEMISTRY:
+Ve - Ve No.of Total
Section Question Type
Marks Marks Qs marks
Sec – I(Q.N : 21 – 28) Questions with Single Correct Choice 3 -1 8 24
Questions with Comprehension Type
Sec – II(Q.N : 29 – 34) 3 -1 6 18
(3 Comprehensions : 3+3 = 6Q)
Questions with Multiple Correct
Sec – III(Q.N : 35 – 40) 4 0 6 24
Choice
Total 20 66
MATHEMATICS:
+Ve - Ve No.of Total
Section Question Type
Marks Marks Qs marks
Sec – I(Q.N : (41 – 48) Questions with Single Correct Choice 3 -1 8 24
Questions with Comprehension Type
Sec – II(Q.N : (49 – 54) 3 -1 6 18
(3 Comprehensions : 2+2+2 = 6Q)
Sec – III(Q.N : 55 – 60) Questions with Multiple Correct Choice 4 0 6 24
Total 20 66
Sec: Jr. Chaina-I space for rough work Page 2
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
PHYSICS Max. Marks: 66
SECTION – I
(SINGLE CORRECT CHOICE TYPE)
This section contains 8 multiple choice questions. Each question has 4 choices (A), (B), (C) and (D) for its answer, out of
which ONLY ONE is correct.
Marking scheme +3 for correct answer , 0 if not attempted and -1 in all other cases.
1. A fine circular tube in a vertical plane contains a column of liquid of density, , which
5
subtends a right angle at the center and a column of density , subtending an
3
angle of 370 at the center. If the radius through the common surface makes with the
vertical an angle , then find
A) Tan1 2 B) Tan 1 3 C) Cot 1 2 D) Cot 1 3
2. A hollow weightless cone of semi vertex angle 600 is completely filled with liquid
and suspended from a point on the rim of its base. Find the ratio of the force of thrust
on the base to the weight of the liquid contained by the cone (Assume minimum
pressure in cone is zero)
32 39 36 29
A) B) C) D)
7 5 7 6
Sec: Jr. Chaina-I space for rough work Page 3
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
3. The shape of the interior of a vessel is a double cone, the ends being open and two
portions connected by a minute aperture at the common vertex. It is placed with one
circular rim fitting close upon a horizontal plane and is filled with water. If the
resultant vertical thrust on the vessel be zero, the length of the axis of the upper portion
h1 and that of the lower portion h2 satisfy
h1
h2
A) h1 h2 B) h1 2h2 C) h1 2.5 h2 D) h1 3 h2
4. A thin circular disc of radius a is immersed into a liquid with its center at a depth of
h below the liquid surface and the plane makes an angle 300 with the horizontal.
Find the force by one side of liquid on the disc. (Neglect atmosphere)
ga 2 h
A) B) ga 2 h C) 2 ga 2 h D) 4 ga 2 h
2
5. Two closely fitting hemispheres made of sheet metal of small uniform thickness, are
hinged together at a point on their rims, and are suspended from the hinge, their rims
being greased so that they form a water tight spherical shell. The shell is completely
filled with water of weight W through a small hole near the hinge. The minimum
weight of the shell so that the contact between the hemispheres does not give away is
(Neglect atmosphere)
A) W B) 2 W C) 3 W D) 4 W
Sec: Jr. Chaina-I space for rough work Page 4
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
6. A solid cone of height H and base radius H/2 floats in a liquid of density . It is
hanging from the ceiling with the help of a string. The force by the fluid on the curved
surface of the cone is ( P0 = atmospheric pressure)
P0 gH P gH P H 2
A) H 2 B) H 2 0 C) H 2 0 gH D) P0 gH
4 3 4 6 4 4
7. A slit is cut at the bottom, along the right bottom edge of a rectangular tank. The slit is
closed by a wooden wedge of mass m =1 kg and apex angle 450 as shown in figure.
The vertical plane surface of the wedge is in contact with the right vertical wall of the
container. Coefficient of static friction between these two surfaces is 0.2 . To what
maximum height, can water be filled in the tank without leakage from the slit? The
width of tank is b = 1m and density of water is 103 kg / m3 . (Neglect atmosphere)
h
A) 5 cm B) 10 cm C) 50 cm D) 1 m
Sec: Jr. Chaina-I space for rough work Page 5
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
8. An open water container and a container that is closed to the atmosphere by an open
tube manometer are connected by a U-tube, whose lower part is filled with carbon
tetrachloride (tet) CCl4 . The height of the water column (density of water
w 1000 km / m3 is h1 0.4 m , the column of oil (density of oil oil 950 kg / m3 ) has the
height h3 0.13m , and the height h2 of the CCl4 column is h2 0.1m .
What is the density net of the CCl4 filling if the manometer reads 1200 N / m2
(manometer reads Gauge pressure)
(Take g 10m / s 2 )
A) 1425kg / m3 B) 1485kg / m3 C) 1525kg / m3 D) 1565kg / m3
SECTION - II
(COMPREHENSION TYPE)
This section contains 6 multiple choice questions relating to three paragraphs with two questions on each paragraph.
Each question has 4 choices A), B), C) and D) for its answer, out of which ONLY ONE is correct.
Marking scheme +3 for correct answer , 0 if not attempted and -1 in all other cases.
Paragraph for Questions 9 & 10
A piston of mass M=3kg and radius=4cm has a hole into which a thin pipe of radius
r=1cm is inserted. The piston can enter a cylinder tightly and without friction, and
initially it is at the bottom of the cylinder. 750gm of water is now poured into the pipe
so that the piston & pipe are lifted up as shown. (Neglect atmospheric pressure)..
Sec: Jr. Chaina-I space for rough work Page 6
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
9. Height h of water in the pipe(In meters) is
2 3 4 5
A) B) C) D)
10. Height H of water in the cylinder (In meters) is
11 6 5 7
A) B) C) D)
32 32 32 32
Paragraph for Questions 11 & 12
An open rectangular tank with dimensions 5m 4m 3m contains water upto height of
2m as shown in fig. It is accelerated horizontally along the longer side. ( g 10m / s 2 ,
Density of water 1000kg / m3 ) AB is the rear wall. CD is the front wall
11. Find the maximum acceleration that can be given to the tank without spilling water
A) 2 m / s 2 B) 4 m / s 2 C) 5 m / s 2 D) 6 m / s 2
12. If this acceleration is increased by 20%, as compared to the value in the previous
question, what is percentage of water spilled over ?
A) 5% B) 10% C) 20% D) 25%
Sec: Jr. Chaina-I space for rough work Page 7
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
Paragraph for Questions 13 & 14
Figure shows a tube whose two limbs are vertical and one is horizontal. A ideal gas is
enclosed between two massless non conducting pistons and liquid of density 1 and 2
are filled in vertical limbs to height of h1 and h2 . Now gas is slowly heated
1 1000 kg / m3 , 2 2000 kg / m3 , h1 2m
Cross-section area of piston A = 10 cm 2
13. Ratio of h1 and h2 at any instant will be
1 2 3 3
A) B) C) D)
2 1 2 4
14. If due to heating separation between piston is increased by 3m then displacement of
piston on left will be
A) 2m B) 1m C) 2.5m D) 1.5m
SECTION – III
(MULTIPLE CORRECT CHOICE TYPE)
This section contains 6 multiple choice questions. Each question has 4 choices (A), (B), (C) and (D) for its answer, out of
which ONE OR MORE is/ are correct.
Marking scheme +4 for correct answer , 0 if not attempted and 0 in all other cases.
15. Figure shows four situations in which two liquids shown with dark shade and light
shade are in a U-tube
Sec: Jr. Chaina-I space for rough work Page 8
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
A) the liquids cannot be in static equilibrium in situations 2 and 3 for any values of
their densities
B) the liquids cannot be in static equilibrium in situation 2 for any values of their
densities
C) For static equilibrium to be possible in situation 1 density of liquid shown with dark
shade must be greater than that of the other liquid
D) For static equilibrium to be possible in situation 4 density of liquid shown with
dark shade must be greater than that of the other liquid
16. Identify the correct statement(s) from the following
A) An ideal fluid cannot offer any resistance to a shear force (an effort to bring a
change in its shape)
B) Any pressure, or additional pressure, applied to the surface or to any other part of an
incompressible liquid at rest is transmitted equally to all parts of the liquid
C) In consequence of Pascal’s law, a certain mass of liquid can be used as a machine
for the purpose of multiplying power due to a force
D) The Elasticity of a fluid is measured by the ratio of a small increase of pressure to
the cubical compression produced by it
17. A circular cylinder of radius R and height H is filled with water to a height (2/3)H. It
starts rotating about its axis with constantly increasing angular speed. Chose the correct
alternatives
Sec: Jr. Chaina-I space for rough work Page 9
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
A) At all speeds, shape of the free surface is paraboloid.
B) The free surface touches first the brim of the cylinder and then the base of the
cylinder.
C) The free surface cannot touch the base without spilling water.
D) The free surface touches the brim as well as the base at the same instant.
18. Mercury is poured into a U-shaped tube of a constant cross-sectional area. When some
amount of water is poured into one arm, the level of mercury in the other arm rises by
2 cm. (density of mercury is 13.6 103 kg / m3 and that of alcohol is 0.8 103 kg / m3 )
A) The height of the water column is 25.2 cm
B) The height of the water column is 54.4cm
C) If now alcohol is added in other arm then the height of the column of alcohol that
must be poured into the second arm to make the level of mercury in it 2 cm higher than
in the first arm is 34.0 cm
D) If now alcohol is added in other arm then the height of the column of alcohol that
must be poured into the second arm to make the level of mercury in it 2 cm higher than
in the first arm is 54.0 cm
19. The vessel shown in figure has two sections of area of cross section A1 ,and A2 . A
liquid of density fills both the sections, upto height h in each. Neglect the
atmospheric pressure ,
Sec: Jr. Chaina-I space for rough work Page 10
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
A) The pressure at the base of the vessel is 2 gh
B) The weight of the liquid in vessel is equal to 2 gh
C) The force exerted by the liquid on the base of vessel is 2 gh A2
D) The walls of the vessel at the level X exert a force gh( A2 - A1 ) downwards on the
liquid.
20. A hollow sphere completely filled with water is translating towards right with an
acceleration a0 3 g . What are the co-ordinates of the point where the pressure in
water is zero?
The origin is at the centre of the sphere, the x-axis is horizontal rightwards and the y-
axis is vertical in a direction opposite to g.
a0
g
R
3R R
A) The maximum pressure inside liquid is at point ,
2 2
3R R
B) The minimum pressure inside liquid is at point ,
2 2
C) The maximum pressure inside liquid is at point 0, R
R 3R
D) The minimum pressure inside liquid is at point ,
2 2
Sec: Jr. Chaina-I space for rough work Page 11
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
CHEMISTRY Max. Marks: 66
SECTION – I
(SINGLE CORRECT CHOICE TYPE)
This section contains 8 multiple choice questions. Each question has 4 choices (A), (B), (C) and (D) for its answer, out of
which ONLY ONE is correct.
Marking scheme +3 for correct answer , 0 if not attempted and -1 in all other cases.
21. Which of the following crystal lattice has unit cell intercepts as a = b c and interfacial
angles 900 & 1200 ?
A) Zinc sulphide B) Sodium chloride
C) Graphite D) Cesium chloride
22. In seven possible crystal systems, how many crystal systems have 900
A) 1 B) 2 C) 3 D) 4
Z
23. Calculate the value of . Where
10
Z = Co – ordination number of 2D –square close packing
+
Co – ordination number of 2D- hcp
+
Co – ordination number of 3D –square close packing
+
Co – ordination number of 3D, ABCABC………. Packing
+
Co – ordination number of 3D, ABAB….. Packing
A) 1 B) 5 C) 6 D) 4
24. If edge fraction unoccupied in ideal anti-fluorite structure is x. Calculate the value of
x
Z. Where Z
0.097
A) 4 B) 3 C) 2 D) 8
Sec: Jr. Chaina-I space for rough work Page 12
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
25. Ionic solid Na A crystallize in rock salt type structure. 2.592 gm of ionic solid salt
NaA dissolved in water to make 2 litre solution. The pH of this solution is 8. If
distance between cation and anion is 300 pm, calculate density of ionic solid
in gm / cm
3
(Given : pK w 13, pK a HA 5, N A 6 1023 )
A) 5.4 B) 3.4 C) 4 D) 5
26. A sample of FexO contains one Fe(III) for every three Fe(II). Then the value of x will
be
A) 8/9 B) 9/8 C) 4/3 D) 6/5
27. Total number of cationic vacancies, if 1 mole of NaCl is doped to get 103 mole% of
SrCl2 is
A) 6.02 1014 B) 6.02 1017 C) 6.02 1015 D) 6.02 1018
28. In which of the following pairs, crystalline compounds in the pair have different crystal
systems?
I) Graphite & Diamond II) Calcite & Cinnabar
III) CaSO4 & BaSO4 IV) B OH 3 & K 2Cr2O7
A) I, II &IV only B) I, II &III only
C) II, III &IV only D) I, III &IV only
SECTION - II
(COMPREHENSION TYPE)
This section contains 6 multiple choice questions relating to two paragraphs with three questions on each paragraph.
Each question has 4 choices A), B), C) and D) for its answer, out of which ONLY ONE is correct.
Marking scheme +3 for correct answer , 0 if not attempted and -1 in all other cases.
Paragraph for Questions 29 & 30
A pair of ‘holes’ or vacancies exists in the crystal lattice due to one cation and one
anion missing from the normal lattice sites. The crystal as a whole remains neutral
because the number of missing cations and anions remains the same. This sort of defect
occurs in highly ionic compounds with a high coordination number and where the ions
Sec: Jr. Chaina-I space for rough work Page 13
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
(both cations and anions) are of similar size. Alkali halides such as NaCl and CsCl
show this defect.
In NaCl crystal, at room temperature, there will be one Schottky defect per 1016 ions.
Since the presence of a large number of Schottky defects in a crystal leads to decrease
in the number of ions in the lattice, this results in lowering the density of the solid
markedly.
29. At zero kelvin, most of the ionic crystals possess
A) Frenkel defect B) Schottyky defect
C) Metal excess defect D) No defect
30. In the Schottky defect
A) Cations are rising from the lattice sites and occupy the interstitial sites
B) Equal number of cations and anions are missing from the crystal
C) Anions are missing and electrons are present in their places of crystal
D) Equal number of extra cations and electrons are present in the interstitial sites
Paragraph for Questions 31 & 32
Metalic Gold crystallize in fcc lattice and the length of cubic unit cell is 407 pm.
(Given: Atomic mass of Gold = 197, N A 6 1023 )
31. Approximate density of gold is (in gm/ cm3 ):
A) 4.86 B) 9.72 C) 8.27 D) 18.90
32. The distance between second nearest neighbours is:
407 407 3
A) 407 pm D) 407 2 C) D)
2 2
Sec: Jr. Chaina-I space for rough work Page 14
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
Paragraph for Questions 33 & 34
The “OLIVINE” series of minerals consists of crystals in which Fe2 and Mg 2 ions
may substitute for each other causing substitutional impurity defects without changing
the volume of unit cell. In “OLIVINE” series of minerals, o 2 ions exist in cubic close
packing with Si 4 occupying one-fourth of octahedral voids and divalent metal ions
occupying one-fourth of tetrahedral voids. The density of “forsterite” (magnesium
silicate) is 3.21 g cm3 and that of “fayalite” (ferrous silicate) is 4.34 g cm3 and they
have lattice individually as similar described for “OLIVINE”.
33. The formula of “fayalite mineral” is:
A) Fe2 SiO4 B) FeSiO4 C) Fe2 SiO6 D) FeSiO3
34. Approximate percentage of “fayalite” in an “OLIVINE” with density 3.88 g cm3 is:
A) 75% B) 59% C) 35% D) 29%
SECTION – III
(MULTIPLE CORRECT CHOICE TYPE)
This section contains 6 multiple choice questions. Each question has 4 choices (A), (B), (C) and (D) for its answer, out of
which ONE OR MORE is/ are correct.
Marking scheme +4 for correct answer , 0 if not attempted and 0 in all other cases.
35. Consider a part of hcp crystal lattice that contains six effective lattice points. A sphere
of radius, ‘r’ is the basis of the crystal. Then select the correct statements:
3
A) Area of base (2r) 2 6
4
B) Total number of octahedral voids are 6
C) Total number of tetrahedral voids are also 6
D) Void fractions is 26%
36. Among the following incorrect representation.
A) Ferrimagnetism is in B) Ferro magnetism is in
C) Anti ferromagnetism D) Ferrimagnetism is in
Sec: Jr. Chaina-I space for rough work Page 15
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
37. Identify the correct combination regarding the type of defect shown by them:
A) KCl Schottky defect
B) ZnO non stoichiometric defect
C) AgBr Frenkel defect and Schottky defect
D) NaCl heating with sodium vapour – F centres
38. Among the following correct statements are
A) GaAs (Gallium Arsinide) is a semiconductor
B) ReO3 is like metallic copper in its conductivity and appearance
C) Quartz glass is a crystalline solid
D) ZnFe2O4 is an example for ferri magnetic substance
39. In FCC structure octahedral voids are present at
A) Cube’s edge centers
B) cube’s face centers
C) Cube’s body centers
D) cube’s corners
40. In sodium chloride unit cell, the correct statement is
A) FCC unit cell is made by Cl¯
B) Sodium ions are present at octahedral voids
C) The unit cell formula is Na4Cl4
D) The edge length of unit cell is equal to rNa rCl
Sec: Jr. Chaina-I space for rough work Page 16
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
MATHS Max. Marks: 66
SECTION – I
(SINGLE CORRECT CHOICE TYPE)
This section contains 8 multiple choice questions. Each question has 4 choices (A), (B), (C) and (D) for its answer, out of
which ONLY ONE is correct.
Marking scheme +3 for correct answer, 0 if not attempted and -1 in all other cases.
41. The equation to the locus of a point whose distance from the z-axis is three times the
distance from the point 1, 2,4 is ____
A) 9 x 2 9 y 2 8 z 2 18 x 36 y 72 z 189 0
B) 8 x 2 8 y 2 9 z 2 18 x 36 y 72 z 189 0
C) 9 x 2 8 y 2 8 z 2 18 x 36 y 72 z 189 0
D) 8 x 2 9 y 2 8 z 2 18 x 36 y 72 z 189 0
42. The points, A 2,2,1 , B 0, 2,3 and C 4,6, 1
A) form an isosceles, but not equilateral triangle
B) form an equilateral triangle
C) are collinear and B divides AC in the ratio 1 : 2 externally
D) are collinear and B divides AC in the ratio 1 : 2 internally
43. The ratio in which yz-plane divides the line segment AB is______; where A 2,3,4
and B 3,5, 4
A) 1 : 1 B) 3 : 5 C) 2 : 3 D) 1:2
x 1 y 1 z x 1 y 3 z 1
44. If acute angle between the lines and is then
p q r q r p
sin ____; where p, q, r are the roots of the cubic equation x3 x 2 4 x 4.
4 65 4 65
A) B) C) D)
9 9 65 16
Sec: Jr. Chaina-I space for rough work Page 17
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
45. The direction cosines of the line joining the points P 2017,2019,2021 and
Q 2019,2016,2015 are
2 3 6 2 3 6 2 3 6 2 3 6
A) , , or , , B) , , or , ,
7 7 7 7 7 7 7 7 7 7 7 7
2 3 6 2 3 6 2 3 6 2 3 6
C) , , or , , D) , , or , ,
7 7 7 7 7 7 7 7 7 7 7 7
46. The angle between the lines whose direction cosines satisfy the relations m n 0
and 3m 5mn 2n 0 is
3
A) B) C) D) sin 1
4 2 3 16
47. The angle between the line joining the points 3,1,5 and 1,5,13 and the line whose
direction ratios are
2019, 2019,0 is . Then 2024 tan ____
2
A) 2 506 B) 2023 C) 2026 D) 45
48. Consider a directed line segment of length 3 units from O 0,0,0 to P a, b, c . If OP
makes a fixed angle with positive x-axis and a fixed angle with positive y-axis,
then the number of possible positions for P are ______
A) one if 0 cos 2 cos 2 1 B) two if 0 cos 2 cos 2 1
C) two if cos 2 cos 2 1 D) one if cos 2 cos 2 0
SECTION - II
(COMPREHENSION TYPE)
This section contains 6 multiple choice questions relating to three paragraphs with two questions on each paragraph.
Each question has 4 choices A), B), C) and D) for its answer, out of which ONLY ONE is correct.
Marking scheme +3 for correct answer , 0 if not attempted and -1 in all other cases.
Paragraph for Questions 49 & 50
The vertices of ABC are A 3,2,0 , B 0,2,4 , C 0,2,0 . Its orthocenter is H and
circumcentre is S .
Sec: Jr. Chaina-I space for rough work Page 18
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
49. The z-coordinate of H is
A) 0 B) 1 C) 2 D) 3
50. The x-coordinate of S is
5 3
A) B) 1 C) 2 D)
2 2
Paragraph for Questions 51& 52
Consider the points O 0,0,0 , A 2,3,6 and B 0,7,0 . D is a point on the line
segment OA.
51. The direction ratios of angle bisector of AOB are ____
A) 1,5,3 B) 1, 5,3 C) 1,5, 3 D) 1,5,3
52. If BD is angle bisector of OBA, then the y-coordinate of D is ____
A) 3 56 7 B) 3 56 8
C) 3 7 56
D) 3 8 56
Paragraph for Questions 53 & 54
Consider a cube with vertices O 0,0,0 , A 1,0,0 , B 1,1,0 , C 0,1,0
, D 0,1,1 , E 0,0,1 , F 1,0,1 , G 1,1,1 .
53. The distance between centroid of ACE and incentre of BDF is ____
1 2 1
A) 3 B) C) D)
3 3 2 3
54. If the angle between body diagonal OG and face diagonal OD is , then
cot 2 ____
A) 1 B) 2 C) 3 D) 4
Sec: Jr. Chaina-I space for rough work Page 19
Sri Chaitanya IIT Academy 29-09-19_Sri Chaitanya-Jr.Chaina-I_JEE-ADV_2012-P2_WTA-15_Q’P
SECTION – III
(MULTIPLE CORRECT CHOICE TYPE)
This section contains 6 multiple choice questions. Each question has 4 choices (A), (B), (C) and (D) for its answer, out of
which ONE OR MORE is/ are correct.
Marking scheme +4 for correct answer , 0 if not attempted and 0 in all other cases.
55. If a, b are perpendicular distances from 1,7,5 to the x-axis, z-axis respectively,
then the number of solutions of the equation a 2 cos 74 log b 50 2 is /are
A) 0 B) 1 C) 2 D) more than 2
56. The values of ' a ', for which the line whose direction ratios are a, 5a 2, 3 makes an
angle 300 with z-axis are a1 and a2 . Then 26 a1 a2 is divisible by _____
A) 2 B) 3 C) 4 D) 5
57. If O is origin, A 3,5,7 and OA is perpendicular to OB, then B can be___
A) 14,9, 1 B) 14,7,1 C) 1,2, 1 D) 7,0,3
58. A point Q at a distance of 3 units from the point P 1,1,1 , lying on the line joining the
points A 0, 1,3 and P has the coordinates____
A) 2,3, 1 B) 4,7, 5 C) 0, 1,3 D) 2, 5,7
59. A 1,1,1 and B , , are two points in space such that AB 27, then the value of
can be___
A) -4 B) -2 C) 2 D) 4
60. The value(s) of , for which the triangle with vertices 6,10,10 , 1,0, 5 and
6, 10, will be right angled triangle is/are
70
A) 1 B) C) 35 D) 0
3
Sec: Jr. Chaina-I space for rough work Page 20
