7/31/2021 Exam Paper

My Account (dashboard)
|
Logout (logout.php)

    

(https://www.facebook.com/Om-
(https://twitter.com/)
(https://www.youtube.com
(https://www.linked
(https://www

Paramedical- omvir-
(https://www.optedu.in/)
Technical- singh-

Education- 22475260)


CALL US TODAY!
OPTE-

+91- 9312875084
247510702092881/)
EMAIL ME!

 [email protected]

[email protected]

Home (https://www.optedu.in/)

About Us (about-us)

Courses 
Academic Collaboration (academic-collaboration)

Contact Us (contact-us)

Online Exam Form (online-exam)

Online Admission (online-admission)   Pay Fees Online (online-fees)

Subject : Control Theory And Practice

Question : 1   1. Static margin is the distance between

  aerodynamic center & neutral point

  aerodynamic center & center of gravity

  center of pressure & center of gravity

  neutral point and center of gravity

Question : 2   2. During rudder maintenance

  chord line should be parallel to horizontal

  hose over condition is called over balance

  hose down condition is called over balance

  as in a & c

Question : 3   3. Loft does not depend on

  aerofoil design Total Visitor -

https://www.optedu.in/exam.php?id=control-theory-and-practice 1/10
7/31/2021 Exam Paper

  amount of using dihedral

  density of air & velocity

  wing surface area

Question : 4   4. Which of the following should also be checked in addition to hard landing inspection items, when the a/c makes
hard landing

  wing center section

  arcing of propeller

  balancing of control surfaces

  none

Question : 5   5. Artificial feel is used in

  aileron control system

  elevator control system

  rudder system

  all

Question : 6   6. Which of the following takes the structural loads in the wheel bay?

  keel beam

  transverse beam

  box beam

  all

Question : 7   7. Structural fuse

  prevents primary structure damage

  prevents shear loads

  prevents overflow of current in the circuit

  as in a & c

Question : 8   8. Color coding of `O` rings indicates

  age

  temp

  vapour compatibility

  all

Question : 9   9. The angle of attack where lift/drag ratio is maximum is called

  dihedral

  anhedral

  incidence

  wash in

Question : 10   10. Mark the correct statement

Total Visitor -
https://www.optedu.in/exam.php?id=control-theory-and-practice 2/10
7/31/2021 Exam Paper

  stall speed-with c.g forward movement

  stall speed-with backward movement

  stall speed does not change with c.g movement

  none

Question : 11   11. Station 185 indicates

  183 mm back of the nose or reference datum

  183 inch back of the reference datum

  183 cm back of the nose or reference datum

  18.30 inch back of the nose or reference datum

Question : 12   12. `Out of freezer` life is associated with

  epoxy resin

  catalyst

  prepeg

  thermosetting

Question : 13   13. Amount of roll dies not depend on

  angle of pitch

  angle of bank

  angle of turn

  as in a & c

Question : 14   14. Damage of rivets around the head is usually

  grey

  white

  brown

  as in a & c

Question : 15   15. The a/c is about to land, the fowler flap is extended, it will cause:

  -in lift

  -in drag

  -lift with nose drag movement

  normal

Question : 16   16. A condition for the speed trim system to operate is

   the flaps are up.

   the flaps are not up.

   the flaps can be in any position.

  none

Total Visitor -
https://www.optedu.in/exam.php?id=control-theory-and-practice 3/10
7/31/2021 Exam Paper

Question : 17   17. Illumination of the Speed Trim Fail light (Master Caution Annunciator recall is not activated)

   indicates failure of a single fcc channel.

   indicates failure of both fcc channels.

   indicates failure of the elevator feel computer.

  none

Question : 18   18. Illumination of the Speed Trim Fail light when Master Caution recall is activated

   indicates failure of both fcc channels and the elevator feel computer.

   indicates failure of a single fcc channel.

   indicates failure of the elevator feel computer.

  none

Question : 19   19. Illumination of the Auto Slat Fail light when Master Caution recall is activated

   indicates failure of a fcc channel or both autoslat computers.

   indicates failure of the elevator feel computer.

   indicates failure of a single autoslat computer.

  none

Question : 20   20. Illumination of the Auto Slat Fail light (Master Caution Annunciator recall is not activated)

   indicates failure of both autoslat computers.

   indicates failure of a single autoslat computer.

   indicates failure of a single fcc channel.

  none

Question : 21   21. The Feel Differential Pressure amber light is

   armed when the trailing edge flaps are not up.

   armed when the trailing edge flaps are up.

   armed at all times.

  none

Question : 22   22. A single autoslat channel failure is indicated

   by pressing to test the auto slat fail light.

   by the immediate illumination of the auto slat fail light.

   by the illumination of the auto slat fail light on a master caution annunciator recall.

  none

Question : 23   23. A single mach trim FCC channel failure is indicated

   by pressing to test the mach trim fail light.

   by the immediate illumination of the mach trim fail light.

   by the illumination of the mach trim fail light on a master caution annunciator recall.

  none
Total Visitor -
https://www.optedu.in/exam.php?id=control-theory-and-practice 4/10
7/31/2021 Exam Paper

Question : 24   24. Positioning the FLT CONTROL A switch to STBY RUD

   arms the alternate flaps master switch.

   arms the standby hyd low qantity light.

   arms the standby hyd low pressure light.

  none

Question : 25   25. The Yaw Damper operation results in

   no rudder pedal movement.

   no rudder pedal movement provided the autopilot is engaged.

   rudder pedal movement.

  none

Question : 26   26. Rudder Trim control requires

   hydraulic power only to trim the rudder.

   both hydraulic and electrical power to trim the rudder.

   electrical power only to trim the rudder.

  none

Question : 27   27. Positioning the Yaw Damper switch to ON

   engages the yaw damper to the rudder power control unit.

   engages the yaw damper to the autopilot power control unit.

   engages the yaw damper to the rudder feel mechanism.

  none

Question : 28   28. Loss of hydraulic system B pressure

   does not cause yaw damper disengagement but will illuminate the amber yaw damper light.

   causes yaw damper disengagement and illumination of the yaw damper light.

   does not cause yaw damper disengagement or illumination of the amber yaw damper light.

  none

Question : 29   29. The Yaw Damper uses

   hydraulic system a pressure only.

   both hydraulic systems a and b pressure.

   hydraulic system b pressure only.

  none

Question : 30   30. Aileron trim is accomplished by

   operation of the aileron trim knob located on the control stand.

   operation of either trim switch located on the control stand.

   simultaneous operation of the trim switches located on the control stand.

  none
Total Visitor -
https://www.optedu.in/exam.php?id=control-theory-and-practice 5/10
7/31/2021 Exam Paper

Question : 31   31. The amount of aileron trim set by a pilot

   is indicated on the graduated scale of the rudder/aileron trim indicator.

   is not indicated.

   is indicated by the amount of control column deflection.

  none

Question : 32   32. Operation of the Rudder Trim Control switc

   electrically repositions the rudder trim tab and centring mechanism which results in a shift in both the rudder and tab positions.

   electrically repositions the rudder feel and centring mechanism which results in a shift in the rudder neutral position.

   hydraulically repositions the rudder feel mechanism which results in a shift in the rudder position.

  none

Question : 33   33. The Rudder Trim Control is

   spring-loaded to neutral and may be rotated left or right provided the autopilot is disengaged.

   spring-loaded to neutral and may be rotated left or right.

   spring-loaded to neutral and must be pushed down before rotating left or right.

  none

Question : 34   34. If the speed brake lever is not ARMED prior to landing. All the spoiler panels will

   automatically extend after landing when thrust levers are positioned for reverse thrust.

   automatically extend after landing when thrust levers are positioned for reverse thrust, provided the autobrake system is in
use.

   remain retracted after landing even when thrust levers are positioned for reverse thrust.

  none

Question : 35   35. If the speed brake lever is used in-flight (ie ARMED) and then returned to DOWN prior to landing (SPEED
BRAKE ARMED light extinguished). All the spoiler panels will

   automatically extend after landing when thrust levers are positioned for reverse thrust.

   remain retracted after landing when thrust levers are positioned for reverse thrust.

   automatically extend after landing when thrust levers are positioned for reverse thrust, provided the autobrake system is in
use.

  none

Question : 36   36. The Speed Brake Test switches (if installed)

   are used as a cockpit pre-flight check of the auto brake system.

   are used for maintenance test purposes only.

   are used as a cockpit pre-flight check of the auto spoiler system.

  none

Question : 37   37. The LE FLAPS TRANSIT amber light on the centre instrument panel
   is not inhibited during autoslat operation in flight.

   is inhibited during flap load relief operation.

Total Visitor -
https://www.optedu.in/exam.php?id=control-theory-and-practice 6/10
7/31/2021 Exam Paper

   is inhibited during autoslat operation in flight.

  none

Question : 38   38. Auto Slat operation can be monitored

   by reference to the flap position indicator.

   by reference to the le flaps transit amber light.

   by reference to the leading edge devices annunciator panel.

  none

Question : 39   39. The Ground Spoilers are powered by

   both a and b hydraulic systems.

   the b hydraulic system.

   the a hydraulic system.

  none

Question : 40   40. The autoslat system is armed

   during take-off or approach to landing with the trailing edge flaps selected 1 through 5.

   at all times in flight irrespective of the flap position.

   during take-off or approach to landing with the trailing edge flaps selected 10 through 25.

  none

Question : 41   41. The Auto Slat system will move

   leading edge slats from the retract to the extend position and back to the retract position again.

   leading edge slats from the retract to the full extend position and back to the retract position again.

   leading edge slats from the extend to the full extend position and back to the extend position again.

  none

Question : 42   42. How many Ground Spoiler panels are there ?

   classics: 6 - ng: 4

   classics: 4 - ng: 4

   classics: 6 - ng: 6

  none

Question : 43   43. The Auto Slat system is normally powered by

   system b hydraulics.

   the standby hydraulic system.

   system a hydraulics.

  none

Question : 44   44. An alternate source of power for Autoslat operation is

   system a hydraulics through a power transfer unit if a loss of system b pressure is sensed.

   the standby hydraulic system. Total Visitor -

https://www.optedu.in/exam.php?id=control-theory-and-practice 7/10
7/31/2021 Exam Paper

   system b hydraulics through a power transfer unit if a loss of system a pressure is sensed.

  none

Question : 45   45. The Flap Load Limiter (B737-300) will retract the trailing edge flaps from the 40 position to the 30 position if
the airspeed exceeds

   155 knots.

   153 knots.

   158 knots.

  none

Question : 46   46. Using Main electric trim, the stabiliser trim authority is

   0.25 - 12.5 units ( flaps retracted ).

   2.5 - 12.5 units ( flaps extended ).

   2.5 - 12.5 units ( flaps retracted ).

  none

Question : 47   47. Using Autopilot trim, the stabiliser trim authority is

   0.25 - 14.0 units ( flaps retracted or extended).

   0.25 - 12.5 units ( flaps extended ).

   2.5 - 14.0 units ( flaps retracted or extended ).

  none

Question : 48   48. With the Stabilizer Trim Override Switch in the OVERRIDE position

  cuts power to all electric trim motors and engages the trim clutch allowing manual trimming of the stabiliser.

   the control column actuated stabiliser trim cutout switches are bypassed to restore power to the electric trim switch.

   the control column actuated stabiliser trim cutout switches are bypassed to restore power to the autopilot trim motor.

  none

Question : 49   49. A condition for speed trim operation is

   n1 above 45% rpm

   n1 above 60% rpm

   n2 above 60% rpm

  none

Question : 50   50. The maximum altitude for flap extension is

   15,000 feet.

   10,000 feet.

   20,000 feet.

  none

Total Visitor -
https://www.optedu.in/exam.php?id=control-theory-and-practice 8/10
7/31/2021 Exam Paper

SUBMIT RESET

Happy Student

TESTIMONIALS.

guys i have done bsc mechanical [AME] from  I recommend the Om

Singhania university ...........and i m doing MBA from Education as they he
xiss , ranchi...........no need to worry ....u may go for it weakness and impro
.....all the best. I have all the support from Om completed the B.Tec
Paramedical & Technical Education. I strongly from here and present
recommend it.  Jodhpur (Raj). 

Manohar, Pandey Arvind, Samant

B-8A, Behind State Bank of India, Samta Enclave, D- Block,

Qutub Vihar-Phase-1
New Delhi - 110071
Nearest Metro Station : Sector 10
Dwarka

 9312875084,8860834242
 [email protected] (mailto:[email protected])

9711486974    [email protected] (mailto:[email protected])  www.optedu.in (http://www.optedu.in/)

Useful Links

About Us (about-us)

Academic Collaboration (academic-collaboration)

Gallery (gallery)

Contact Us (contact-us)

Subscribe Us
Total Visitor -
https://www.optedu.in/exam.php?id=control-theory-and-practice 9/10
7/31/2021 Exam Paper

Your Email Subscribe

Connect With Us

    

(https://www.facebook.com/Om-
(https://twitter.com/)
(https://www.youtube.com/)
(https://www.linkedin.com/in/dr-
(https://www.instagram.com/optedelhi/)

Paramedical- omvir-
@Copyright 2014 Om Paramedical and Technical Education All Right Reserved.
Technical- singh-

Total Visitor -
https://www.optedu.in/exam.php?id=control-theory-and-practice 10/10