Scribd
Upload
182 views

Design PM Interaction Curve For Circular Column

1. The document provides design parameters for calculating the design interaction curve for a circular column with a diameter of 1800mm and M35 grade concrete. 2. 17 points are calculated on the strain diagram to plot the design interaction curve between axial load (Pud) and bending moment (Mud). 3. 24 load combinations are checked against the design interaction curve to check if they satisfy the design limits.

Uploaded by

Poshan Dhungana
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
182 views

Design PM Interaction Curve For Circular Column

1. The document provides design parameters for calculating the design interaction curve for a circular column with a diameter of 1800mm and M35 grade concrete. 2. 17 points are calculated on the strain diagram to plot the design interaction curve between axial load (Pud) and bending moment (Mud). 3. 24 load combinations are checked against the design interaction curve to check if they satisfy the design limits.

Uploaded by

Poshan Dhungana
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Design PM Interaction Curve for Circular Column key:

input
D or h = 1800 mm check
clear cover = 75 mm
effective cover, d' = 111 mm
d= 1689 mm
2
Ag = 2544690 mm gross area
2
Ac = 2240522 mm core area

Rebar: dia = 32 mm main bar dia = 20 mm ties


nos. = 60 spacing = 90 mm c/c
spacing = 83 mm c/c
2
Total area, As = 48255 mm = 1.90% of gross area

For concrete grade M60 or less


ec2 = 0.0020
ecu2 = 0.0035
n= 2

Concrete M35
2
fck = 35 N/mm
a= 0.67
gm = 1.5
2
fcd = 15.63 N/mm

Steel Fe 500
gs = 1.15
fyd = 435 N/mm2
Es = 200 GPa
ey = fyd/Es = 0.00217
euk = 0.05 for uniform elongation as per Table 18.1 of IRC 112 and IS 1786

As per IRC 112 zoning of permissible strains, following salient points are identified on the strain block for the
calculation of (Pud, Mud):
+ --> compressive - --> tensile
strain at x = 0 d h xu/d
1. Tensile with no ecc. -0.05 -0.05 #DIV/0! = -ve inf
2. Dividing zone 1 & 2: 0 -0.05 0
3. Dividing zone 2 & 3: 0.0035 -0.05 0.065
4. Dividing zone 3 & 4: 0.0035 -0.00217 0.617
5. Dividing zone 4 & 5: 0.0035 0.00022 0 1
6. Compressive with no ecc 0.0020 0.0020 #DIV/0! = +ve inf

Additional points with strain at x = 0 d


within zone 2: 0.00117 -0.05
0.00233 -0.05
within zone 3: 0.00350 -0.0341
0.00350 -0.0181
0.00350 -0.0101
0.00350 -0.0062
0.00350 -0.0042
0.00350 -0.0032
within zone 4: 0.00350 -0.0014
0.00350 -0.00058
within zone 5: 0.00250 0.00133

Now calculating Pud and Mud values for interaction curve:


Point Mud
ec et Fcc (kN) Xcc (m) Fsc (kN) Xsc (m) Fst (kN) Xst (m) Pud (kN)
No. (kNm)
1 -0.05 -0.05 0.0 0.000 0.0 0.000 -20980.4 0.000 -20980.4 0.0
2 0 -0.05 0.0 0.000 0.0 0.000 -19334.6 -0.066 -19334.6 1283.0
3 0.00117 -0.05 82.1 0.883 0.0 0.000 -19253.1 -0.070 -19171.0 1418.0
4 0.00233 -0.05 356.7 0.864 0.0 0.000 -19145.1 -0.075 -18788.4 1735.6
5 0.0035 -0.05 723.5 0.843 0.0 0.000 -18837.4 -0.088 -18113.8 2266.2
6 0.0035 -0.0341 1221.5 0.819 487.0 0.785 -17602.0 -0.145 -15893.5 3927.3
7 0.0035 -0.0181 2747.9 0.760 2135.0 0.782 -15543.9 -0.245 -10661.0 7572.9
8 0.0035 -0.0101 5500.0 0.685 4170.9 0.783 -13404.2 -0.354 -3733.2 11777.6
9 0.0035 -0.0062 8692.1 0.590 4923.6 0.771 -11328.9 -0.457 2286.8 14099.2
10 0.0035 -0.0042 11936.7 0.512 5989.0 0.769 -9540.6 -0.538 8385.1 15847.3
11 0.0035 -0.0032 14380.3 0.457 6704.3 0.767 -8179.9 -0.591 12904.7 16547.0
12 0.0035 -0.002174 18338.9 0.399 7629.4 0.765 -5971.6 -0.652 19996.7 17040.7
13 0.0035 -0.00138 21416.3 0.306 8850.3 0.767 -3204.4 -0.689 27062.2 15540.8
14 0.0035 -0.00058 26328.4 0.204 10645.0 0.770 -942.8 -0.740 36030.6 14249.3
15 0.0035 0.0002158 33831.1 0.105 12211.9 0.741 0.0 0.000 46043.0 12595.1
16 0.0025 0.00133 35908.0 -0.062 15071.2 0.695 0.0 0.000 50979.3 8240.1
17 0.0020 0.0020 39782.0 0.000 19301.9 0.000 0.0 0.000 59083.9 0.0

PM Interaction Cuve for Circular Section


Design PM Interaction Curve Chart PuMy Chart PuMx

70000.0

60000.0

50000.0

40000.0

30000.0
Pud (kN)

20000.0

10000.0

0.0
0.0 2000.0 4000.0 6000.0 8000.0 10000.0 12000.0 14000.0 16000.0 18000.0

-10000.0

-20000.0

-30000.0
Mud (kN-m)
Check position of this point on above curve to see safe or not.

S.No. Combo P (kN) Hx (kN) My (kNm) Hy (kN) Mx (kNm)


1 1BLA 7169.3233 522.542 12835.9 63.5675 784.57776
2 1BLR 5639.4175 522.542 11329.8 63.5675 784.57776
3 1BTA 6817.1891 566.787 12373.5 63.5675 643.04039
4 1BTR 5287.2833 566.787 10867.4 63.5675 643.04039
5 1XLA 5569.3313 1251.47 14029.8 56.1315 157.16825
6 1XLR 4039.4255 1251.47 12523.7 56.1315 157.16825
7 1XTA 5770.5509 1194.28 14051.5 56.1315 238.04675
8 1XTR 4240.645 1194.28 12545.4 56.1315 238.04675
9 1YLA 5569.3313 101.504 6249.03 1260.01 8347.7039
10 1YLR 4039.4255 101.504 4742.92 1260.01 8347.7039
11 1YTA 5770.5509 44.32 6270.79 1260.01 8428.5824
12 1YTR 4240.645 44.32 4764.68 1260.01 8428.5824
13 2BLA 11282.477 522.542 7358.26 63.5675 2056.2913
14 2BLR 8731.4825 522.542 7358.26 63.5675 2056.2913
15 2BTA 10837.121 566.787 6895.9 63.5675 1618.0207
16 2BTR 8286.1258 566.787 6895.9 63.5675 1618.0207
17 2XLA 9282.9603 1978.45 14077.3 56.1315 157.16825
18 2XLR 6731.9655 1978.45 14077.3 56.1315 157.16825
19 2XTA 9537.4499 1921.27 14099 56.1315 407.60855
20 2XTR 6986.455 1921.27 14099 56.1315 407.60855
21 2YLA 9282.9603 101.504 771.427 2001.38 13982.106
22 2YLR 6731.9655 101.504 771.427 2001.38 13982.106
23 2YTA 9537.4499 44.32 793.183 2001.38 14232.546
24 2YTR 6986.455 44.32 793.183 2001.38 14232.546

You might also like