Square balers

QUADRANT
5300 3300
 When reliability matters –the QUADRANT from
CLAAS.

51 knives 500 - 2,760 lb Six knotters since Maximum

(250 –1,250 kg) bale 1921 convenience
weight
FINE CUT (5300 / 3300) Four sensors allow the bale Patented in 1921: the high- Tried and tested automatic
achieves 36,000 chops per to be weighed extremely performance single knotter pressure control – for
minute during baling, accurately, right on the bale with eccentric needle optimal baling pressure,
thanks to its 51 knives. ramp. control – reliable knotting unsurpassed bale quality
with easy twine routing and and maximum operator
no twine residue. comfort.

2
 QUADRANT from CLAAS

QUADRANT from CLAAS 2

Model overview 4

The technology 6
Pick-up 8
POWER FEEDING SYSTEM (PFS) 10
Hydraulic Pick Up 12
ROTO FEED 14
ROTO CUT 16
FINE CUT 18
Knife drawer 20

Pre-chamber, feed rake, bale

chamber 22
INTELLIGENT FEEDING SYSTEM 24
Drive system and interactive safety 26
Automatic baling pressure control 28
Bale chamber 30

Tying 32
CLAAS knotter 34
CLAAS knotting technology 36
Bale weighing system 38

Machine operation 40

Tires and maintenance 42

CLAAS Service & Parts 44

Specifications 46

3
 QUADRANT 5300 –
the baling heavyweight.

For a bale size of 48 x 35.5 in (1.2 × 0.9 m). Individual strengths:

−− NEW: Hydraulically driven pick-up
Output/throughput −− NEW: Automatic Pressure Control (APC)
−− NEW: Knotter monitoring
Density −− NEW: Long 152 inch (3.85 m) bale chamber
−− Crop feed systems to suit a variety of needs: ROTO FEED,
Convenience ROTO CUT, FINE CUT
−− NEW: Integrated bale weighing system

15 16
21 13 14
11 18

10 1

20
17

9
6 7 8

4
2
5 19

QUADRANT 5300 3300

1 Bale size 47 x 35 in (1.20 x 0.90 m) l l

2 Pick-up width 92.5 in (2.35 m) l l
3 2 oscillating pick-up castor guide wheels l l
4 POWER FEEDING SYSTEM (PFS) l m
5 NEW: Hydraulically driven feeder unit m –
6 ROTO FEED o o
7 ROTO CUT with knife drawer (25 knives) o o
8 FINE CUT with knife drawer (51 knives) o o
9 Adjustable hydraulic pre-chamber l l
10 46 ram strokes l l
11 NEW: Automatic Pressure Control (APC) l –

4
 QUADRANT 3300 – Model overview

the workhorse.

For a bale size of 48 x 35.5 in (1.2 × 0.9 m). Individual strengths:

−− 46 ram strokes per minute for good throughput and excellent
Output/throughput bale density
−− Hydraulically controlled pre-chamber for optimal bale weight,
Density depending on crop volume
−− FINE CUT with 51 knives for outstanding chop quality
Convenience

15 16
12
21

10
1

17
20 9

6 47 8

2
5
4

QUADRANT 5300 3300

12 6 CLAAS single knotters – l

13 NEW: 6 CLAAS HD II single knotters l –
14 NEW: Knotter monitoring m –
15 TURBO FAN knotter cleaning system with air diffuser l l
16 Eccentric needle control l l
17 Moisture meter m m
18 NEW: LED package m –
19 NEW: Bale weighing system m –
20 ISOBUS-compatible l l
21 Automatic electric central lubrication system l l

l Standard m Optional o Available – Not available

5
The most effective kind of work is always
teamwork.

The technology.

Our engineers understand the need  for synergy throughout

the harvesting process. We have therefore brought together all
our technical expertise into one of the world's largest state-of-
the-art product development centers for baler technology and
built it into our machines. This means you can be sure of the
highest quality and the ideal square baler for every application.

6
The technology

7
Every leaf is worth harvesting – no matter how
small it is.

The benefits at a glance.

−− 92.5 in (2.35 m) wide, cam-controlled pick-up for loss-free crop pick-up

−− Double roller crop press to guide crop into the pick-up and level out uneven windrows
−− Bales are easy to transport and store, thanks to ROTO FEED or POWER FEEDING SYSTEMS (PFS)
−− Overdrive protection via a cam clutch and free-wheel mechanism
−− Pick-up variants for straw, hay, and silage

8
 Pick-up

Controlled pick-up. ROTO FEED and POWER FEEDING SYSTEM

(PFS).
The view of the pick-up from the cab is excellent, allowing the
baler to move over the field quickly and smoothly. You can The four rows of tines, ideally spaced for thorough raking,
easily adjust the driving and baling speed to suit the guarantee superior results in the field. The twin spring steel
harvesting conditions. The result is optimum throughput and tines are bolted firmly to four rugged U-shaped tine arms to
efficiency. withstand continuous and extreme loading and provide easy
servicing. The crop is funneled to the appropriate width for
Thanks to the wide pick-up, the QUADRANT 5300 and 3300 entering the baling chamber via the stub augers on either side
can cope with very wide, irregular swaths, with no loss of of the wide pick-up mechanism (ROTO FEED) on QUADRANT
valuable crop material: 3300 or via the continuous POWER FEEDING SYSTEM (PFS)
−− Rapid and clean intake of harvested crop via controlled rollers on QUADRANT 5300. This produces firm bales that are
pickup highly compacted at the edges for excellent stability during
−− Shock absorption via hydraulic accumulator suspension transportation and storage.
−− Caster guide wheels for optimal ground contour following
and preservation of grass cover, including at high speeds
and when turning Ready for anything.
−− Patented double roller crop press for accelerating the crop
flow in all QUADRANT models A range of pick-up variants ensures a neatly collected crop –
−− Short distance between the pick-up and rotor or feed rake regardless of whether it's short hay, wet silage or straw:
for rapid transfer of the crop and high throughput −− Pick-up with double-roller crop press and POWER
FEEDING SYSTEM (PFS)
−− Hydraulic pick-up with PFS and infinitely variable speeds -
adjustable from the cab, and reversing function

QUADRANT 5300 3300

Overall working width in (m) 92.5 (2.35) 92.5 (2.35)

Tine to tine working width in (m) 83 (2.15) 83 (2.15)
Caster guide wheels l l
Hydraulic pick-up m –

l Standard m Optional – Not available

9
We simply can't get enough.

The benefits at a glance.

−− Transverse feed auger for increased and more uniform crop flow
−− Work faster and better, with more even crop flow: the POWER FEEDING SYSTEM (PFS)
−− Enormous intake capacity even when processing large, non-uniform windrows

10
 POWER FEEDING SYSTEM (PFS)

Transverse feed auger.

The continuous transverse feed auger, cushioned by shock

absorbers and with large pitch and aggressive paddles,
delivers the harvested crop far down into the rotor. In the
process, the crop flow is effectively evened out and
accelerated in its delivery to the rotor.

POWER FEEDING SYSTEM (PFS)

The wider stars reduce the distance to the knife, enhance

chop quality, and give maximum durability and working life.
The unique combination of roller crop press and actively
powered, continuous-feed auger makes your work easier.

The QUADRANT can even process large

uneven windrows.

−− Capacity for high tonnage per hour

−− Enables high ground speeds
−− Crop flow homogenized and accelerated
−− Suitable for all windrows
−− High throughput, thanks to 20% increased protection of the
PFS friction clutch
−− Variable speed adjustment with the intake via hydraulically
operated pick-up, PFS and rear roller crop press

QUADRANT 5300 FC 5300 RC 5300 RF 3300 FC 3300 RC 3300 RF

PFS l l l l l –

l Standard m Optional – Not available

11
NEW

Our intake capacity just keeps on growing.

(optional on QUADRANT 5300)

The benefits at a glance.

−− Hydraulically controlled intake: convenient, flexible and protects the forage

−− Variable speed adjustment
−− High levels of comfort: convenient reversing option controlled from the cab

12
 Hydraulic Pick-up

Pick-up, PFS and roller crop press ensure an The hydraulic feeder unit is easily adjusted from the The pick-up, PFS and rear roller crop press can be
optimum crop flow driver's seat conveniently reversed from the cab

Hydraulic feeder unit. Variable speed adjustment.

For the QUADRANT 5300, CLAAS offers a hydraulically Variable speed adjustment allows rotor filling to be optimized
operated feed system. The rear roller crop press, the POWER via the POWER FEEDING SYSTEM (PFS). The hydraulic PFS
FEEDING SYSTEM (PFS), and the pick-up are hydraulically is even more flexible than the mechanical version and is better
operated, with adjustable and reversible speeds. able to handle a variety of different crops.

The benefits of a hydraulic feed system are clear to see:

−− Individual adjustment to crop and field conditions for Convenient reversing option controlled from
greater forage protection the driver's seat.
−− Greater adaptability to field conditions
−− Optimized crop flow The driver can also clear any blockages via the control
−− Reverse control from the cab, for maximum terminal, from the comfort of the cab. This makes the task
user-friendliness easier and less stressful.

The hydraulic drive enables the driver to adjust and optimize

the crop flow according to the conditions.

Maximizing the feed rate for an optimum crop flow is the

priority for most harvest crops, but for alfalfa, ultra-gentle
handling is paramount. The hydraulic feed system therefore
enables the driver to take this into account and directly
enhance the feed crop quality.

QUADRANT 5300 FC 5300 RC 5300 RF 3300 FC 3300 RC 3300 RF

Hydraulic pick up m m m - - -

l Standard m Optional – Not available

13
Sometimes a gentle touch is called for.

The benefits at a glance.

−− Outstanding throughput and high work rate: ROTO FEED with feed rotor
−− High rotor weight for smooth running
−− Innovative arrangement of rotor blades helps protect delicate crops such as alfalfa

14
 ROTO FEED

ROTO FEED – rotor technology with no Innovative arrangement of rotor blades

chopping required. protects the crop.

QUADRANT – rotary, permanent intake even without the The large 19.75 in (500 mm) diameter rotor and the spiral-
chopping system. The high speed ensures enormous shaped arrangement of the four point blades protect the crop
throughput and high acreages. Thanks to an even intake and extremely well:
active delivery to the pre-chamber, the QUADRANT produces −− Uniform intake
sharp-edged, evenly compacted bales. −− High throughput
−− Low power requirement and low dust accumulation
−− Suitability for delicate forage types such as alfalfa
High dead weight. −− High standard of crop protection for excellent forage
quality, thanks to the innovative arrangement of the rotor
The high dead weight of the rotor keeps the mechanism blades
running extremely smoothly. Owing to the rotor's large mass, −− POWER FEEDING SYSTEM (PFS) available in all
the rotor speed remains constant even in uneven windrows, QUADRANT 5300 and select QUADRANT 3300 models
reducing the load transmitted to the tractor drive.

QUADRANT 5300 3300

ROTO FEED o o
Diameter in (m) 19.75 (0.5) 19.75 (0.5)
Width in (m) 47.25 (1.2) 47.25 (1.2)

o Available – Not available

15
The right cut for optimum forage quality.

The benefits at a glance.

−− Top silage quality with optimal lactic acid fermentation, thanks to ROTO CUT
−− Greater compaction and easier breakdown of the silage
−− Controllable knife group changing means the right number of knives for every application
−− Fewer blockages, thanks to hydraulic cutting floor

16
 ROTO CUT

Knife group changing allows you to react flexibly to the

requirements of the job at hand. The knife groups can be pre-
selected on the machine and extended or retracted via the
monitor in the tractor cab.

The complete cutting system at a glance:

−− Massive 25-knife cutting rotor made from double-hardened
boron steel
−− Four tine rows for optimum crop intake
−− Aggressive knives with extremely long blades for especially
good chop quality
−− Precise knife guidance through the spirally arranged dual
Optimal silage quality with ROTO CUT. tines
−− Individual blade protection
Energy-rich and tasty silage with proper lactic acid −− Flat, power-saving cutting angle
fermentation is crucial for high milk production in the dairy
herd. The three essential ingredients are a short chop length, Two hydraulic knife guards ensure that you don't overload the
high baling pressure and the exclusion of oxygen. The CLAAS QUADRANT in the event of a blockage. If excess pressure
ROTO CUT system currently has one of the highest chopping builds up, the knives move down automatically and spring
frequencies on the market, delivering chop lengths of 1.8 in back into position by themselves.
(45 mm) with excellent chop quality.

Benefits of ROTO CUT: more chops per minute. Safe and secure – the hydraulic cutting floor.
−− Less time spent mixing in the feed mixer
−− Better forage quality Thanks to the automatic lowerable cutting floor, blockages
−− Less feed residue can be easily removed from the cab. This is a feature that is
unique to large square balers from CLAAS. The hydraulically
operated cutting floor is designed to lower automatically in the
25 knives for top forage quality. case of overload and enables the rotor to restart by itself. This
feature also allows easy access to the knives.
The chopping rotor works precisely, quickly and effectively,
with helical double tines for a consistently good feed quality.
Because the crop is cut short and precisely into small lengths,
it can be compacted more densely and later broken up much
more easily.

QUADRANT 5300 RC 3300 RC

Number of tine rows 4 4

Knife group changing 25, 13, 12, 6, 0 25, 13, 12, 6, 0
Cutting length 5.5 / 3.5 / 1.8 in 5.5 / 3.5 / 1.8 in
(140 / 90 / 45 mm) (140 / 90 / 45 mm)
Lowerable floor automatic automatic

17
Top of the range –the finest short straw.

The benefits at a glance.

−− High forage quality with FINE CUT

−− Good livestock practice: a fine cut for optimum bedding quality
−− New knife group changing means less maintenance and saves time

18
 FINE CUT

FINE CUT – hardly a stalk longer than .9 in

(22 mm).

Happy animals produce better yields. For example, there is a

marked increase in the rumen action of animals fed a mixture
of short straw and silage. And it's hard to find a
better bedding material than short straw. It's almost entirely
dust-free, since the cutting action prevents dust from getting
in. Furthermore, short straw is increasingly being added to the
feed mixer. FINE CUT straw breaks down easily, with no pre-
mixing required, and it mixes directly with the added silage.
The new knife group combinations, with a choice of 51, 26,
25, 13, 12 or 0 knives, allow for greater flexibility and better Flexible – knife group switching.
chop quality.
The FINE CUT cutting system proven on the QUADRANT
The advantages. 3300 is now also available on the QUADRANT 5300. This
−− Significantly better crop intake second-generation FINE CUT system with a 51-knife chopper
−− Reduced waste housing introduces a whole new dimension of cut-straw
−− Stimulation of rumen action quality. The new knife group combinations bring many
−− Increase of overall crop intake benefits: more effective cutting, optimal time-saving, less
−− Cuts the time for replacement of food residues and cleaning maintenance, less wear, and high flexibility. For example, you
of feeding stations can be cutting with 26 knives, while the 25-knife group
remains protected in the chopper housing. As soon as the
26-knife group needs sharpening, you can exchange it
A fine cut – for optimum bedding quality. immediately with the 25-knife group. The knives that have just
been removed can now be sharpened and work continues
A clean and precise cut is ideal for good livestock practice: without interruption.
−− Easily mixable – less power required for distribution
−− Not split – far fewer animal losses in poultry husbandry, as
the chickens don't eat the straw
−− Provides excellent structure in livestock feed
−− Less time spent mixing in the feed mixer

QUADRANT 5300 3300

FINE CUT o o
Knife group changing 51, 26, 13, 12, 0 or 51, 26, 13, 12, 0 or
51, 26, 25, 13, 0 51, 26, 25, 13, 0
Cutting length 3.5 / 1.8 / 0.9 in 3.5 / 1.8 / 0.9 in
(90 / 45 / 22 mm) (90 / 45 / 22 mm)

o Available – Not available

19
The CLAAS knife drawer – what you use frequently
should always be on hand.

The benefits at a glance.

−− The QUADRANT 5300 and 3300 have an easily accessible knife drawer
−− Maximum reliability and service life, thanks to well protected knives

20
 Knife drawer

Ten benefits of the CLAAS drawer system: Convenient: the knife drawer.

 1 A total of 12 protected, dirt-proof, smooth-glide bearings The CLAAS knife drawer for ROTO CUT and FINE CUT
for extracting the knife drawer simplifies maintenance routines.
 2 Knife group changing | operable via a simple lever for a
theoretical chop length in FC balers of 3.5, 1.8, or .9 in Quick, convenient and safe:
(90, 45 or 22 mm) or RC balers with chop length of 5.5, −− Operation via the tractor monitor or directly via buttons on
3.5, or 1.8 in (140, 90, or 45 mm) the side of the baler
 3 Optimal knife shape for perfect chop quality −− Automatic function: knives swing in and out to eliminate dirt
 4 Exclusive: automatic knife cleaning from the knife slots of the chopper housing
 5 Blank knife set available for RC and FC −− Automatic and thus consistently accurate positioning of
 6 Automatic function for convenient lowering and closing of drawer for easy extraction at each side
knife drawer
 7 Convenient operation of CLAAS drawer system directly
from the baler Well-protected knives cut better.
 8 100% accessibility, thanks to bilateral pullout
 9 Exclusive: automatic hydraulically lowerable cutting floor The knives in the knife drawer are optimally protected against
in the event of a blockage dirt accumulation. A total of 12 bearings allow the drawer to
10 Individual knife guards with two springs per knife be pulled out smoothly and easily. To prevent twisting upon
extraction, the knife drawer slides out by only two-thirds at
either side. After replacing the knives on one side, the drawer
is simply slid to the opposite side to replace the remainder.

The knife drawer is combined with the chopper housing,

automatically lowerable as before, in the event of a rotor
blockage.

QUADRANT 5300 3300

Knife drawer l (RC/FC) l (RC/FC)

l Standard m Optional – Not available

"Instead of taking an hour to replace the knives, just 15

minutes is needed. The maintenance time overall has
diminished."

Albert Steyns, contractor, Lontzen, Belgium

21
Think inner beauty can't be seen? Take a closer
look.

Pre-chamber, feed rake, bale chamber.

As is often the case, it's what's on the inside that counts. In

the next few pages, we reveal these "hidden" qualities – the
innovative and clever technical solutions that keep your work
ticking along smoothly, without interruption.

22
Pre-chamber, feed rake, bale chamber

23
Is the pressure getting too much? We can help
keep it under control.

Unique to CLAAS: the INTELLIGENT FEEDING Hydraulic packer tine control.

SYSTEM (IFS).
For large windrows, the QUADRANT produces bales with the
Depending on the consistency of the crop and windrow size, pre-chamber control deactivated. In all other cases, you can
the pre-chamber mode can be selected from three available activate the hydraulic and wear-free packer tine control
options via the ISOBUS control terminal to achieve maximum effortlessly from the cab.
output at all times. Regardless of the windrow and crop
conditions, you can keep everything under control with the Three different settings ensure optimal compaction in all
adjustable, hydraulically actuated pre-chamber. conditions.  Whether the machine is configured for medium or
small windrows, each bale is always optimally filled and the
harvested crop is forced into the chamber in a single stroke.
Unique crop flow concept. The result is a perfect bale shape with even compaction, even
when baling irregular or small windrows.
Smooth crop transport from the rotor to the packer tines and
the adjustable pre-chamber ensure homogeneous filling of the Only from CLAAS: equipped with two paddle shafts and
chamber in all crop types, whether straw, hay or silage. The sensors, the QUADRANT gathers the harvested crop until the
results are firm, well-shaped and conveniently stackable bales pre-chamber is optimally filled.
with maximum throughput and a chopping performance that
speaks volumes.

The benefits at a glance.

−− Exclusive to CLAAS: the pre-chamber can be adjusted from the comfort of the cab
−− Even filling of the chamber for all crop types: the CLAAS crop flow concept
−− Perfect bale shape with a consistent density: the hydraulic packer tine control is impressive whatever the conditions
−− Safe and reliable: the feed rake and rotor are protected via a clutch

24
 INTELLIGENT FEEDING SYSTEM

Reliable protection of feed rake and rotor. Adjustable pre-chamber control.

Push your QUADRANT to the limit. The feed rake and rotor The pre-chamber can be adjusted from the comfort of the
are protected via a clutch. If the feed rake is blocked, the rotor cab, so that you can be sure of the best results, no matter
stops automatically. Additionally, information regarding the what the crop type or volume.
feed rake load is communicated to you via the ISOBUS
control terminal, enabling you to prevent a potential overload
ahead of time. This means you'll never be able to drive the
QUADRANT to a standstill. New in the QUADRANT 5300:
feed rake clutch protection set 30% higher for performance
peaks.

25
When everything is secure, work goes off without
a hitch.

The benefits at a glance.

−− Extremely reliable, thanks to enhanced drive concept

−− Fault-free operation: Intelligent safety technology for maximum performance without interruption
−− Special protection to prevent machine from jamming

26
 Drive system and interactive safety

Dependable drive concept. floor can be lowered via the tractor hydraulics. This means the
QUADRANT will never be driven to a standstill. You can
QUADRANT balers have impressed operators for years in quickly clear any blockages from the comfort of the tractor
daily operations with their absolutely reliable drive design. seat.
Clearly arranged and easily accessible components ensure
high efficiency and a long service life. The design ensures The feed rake is effectively protected with the additional
outstanding efficiency by transmitting all power along short, specially adjusted safety clutch, so that the machine will never
straight lines using a very large flywheel. Lowest possible get jammed. In the new QUADRANT 5300, the high baler
energy consumption per ton of crop is reflected in lower fuel throughput is protected with a 30% stronger clutch. High
bills. performance is assured by a torque increase of 26%.

Outstanding features that have been setting the standard for

Intelligent safety technology. years:
−− High speeds and low torque
Superior safety technology ensures fault-free operation. The −− Maintenance-free drives and clutches operating in an oil
cleverly designed drive of the packer tines, needles and bath
knotters via the shafts and transmission offers dependable −− Maintenance-free packer tine drive with hydraulically
peak performance. The baler is effectively protected by the adjustable pre-chamber
main transmission's overload clutch against damage caused −− Divided power flow: baling rams, packer tines, pick-up and
by the intake of foreign objects. rotors are powered separately
−− Minimum number of moving parts

Overload clutch protects machine from Ram loading is electronically monitored. If an overload occurs,
jamming. it is compensated by the hydraulic pressure control to protect
the baling unit. The driver is informed via the display and
The feed rake and rotor are fitted with separate automatic baling pressure is automatically built up again.
overload protection devices. Whenever the packer tine clutch
engages, the rotor clutch is disconnected automatically. All
overload clutches automatically re-engage when the PTO
speed is brought back down. You'll never need to leave the
driver's seat in the event of a blockage. If required, the cutting

Two oil pumps supply hydraulic oil to the input transmission and the TURBO Maintenance-free safety: high-quality overload couplings with oil bath lubrication
FAN knotter cleaning system protect the QUADRANT against overload

27
NEW

A must-have in the field – consistent bale density.

The benefits at a glance.

−− Only from CLAAS: automatic baling pressure control for consistently uniform bale density and high operating comfort
−− Simple operation: even inexperienced drivers can achieve optimal results using the pre-set values for automatic baling
−− More baling options: optional knotter monitoring

28
 Automatic baling pressure control

1 2 3

The automatic baling pressure system detects The sensor on the baler frame transmits one With an automatic baling pressure control
and displays the load on the baler frame and of the two control values, and the load is system, there are a total of three knotter
knotters displayed to the driver on the operating sensors, which provide the second control
terminal value

New from CLAAS: Automatic Pressure Control Simple operation, maximum results.
(APC).
The control variables for automatic baling are the load on the
There are many baling pressure control systems on the baler frame and the twine tension. With automatic baling
market – but only CLAAS offers an automatic control system pressure control, even an inexperienced baler driver has no
for baling pressure. The distinctive feature here is that baling problem in operating the machine at maximum capacity, hour
pressure is controlled not just by the load on the main frame, after hour. The first step is to enter the maximum baling
but also the twine tension. density in the menu, according to the crop and twine quantity.
The machine then calculates the load limit on the basis of
As the driver, you have a clear view of the load limits at all these values.
times, with no need to intervene directly. The optimum baling
pressure is set completely by the machine, according to the
crop and twine quality. More options with knotter monitoring.

The benefits are self-evident: With a further three knotter sensors, automatic baling
−− Consistently high bale density, even when operating at the pressure control can be extended into a knotter monitoring
limit capacity of the machine and the twine system, measuring the tension of all knotters. A message is
−− The bales produced throughout the day are uniform and displayed to the driver whenever there is no tension at one of
bale density is consistent the knotters. Another knotter monitoring feature is a left-right
−− Optimal driver comfort: simple to operate and easy to display, helping to ensure that the driver keeps producing
handle, which is particularly helpful for inexperienced baler ideally shaped bales under all operating conditions.
drivers
−− Reliable tying through adjustment to twine quality

QUADRANT 5300 3300

Automatic Pressure Control (APC) l –

Knotter monitoring m –

l Standard m Optional – Not available

29
NEW

How do we respond to pressure? Hard and fast.

The benefits at a glance.

−− Better bale shape and higher tonnage per hour, thanks to redesigned bale chamber
−− New chamber concept for optimal bale density and reliable tying

30
 Bale chamber

Improved bale shape – rock-hard bales all the

way.

The new QUADRANT generation balers enable you to bale

more bulk. The shape and length of the bale chamber in the
QUADRANT 5300 have been modified to achieve a better
bale shape and higher density. You bale more pounds per
cubic foot and achieve higher tonnage per hour. The
extension at the end of the bale chamber allows the bale
space to lengthen gradually as the twine tension is slowly
increased. This reduces the risk of twine breakage to an
absolute minimum.

As a professional, you'll appreciate the

redesigned bale chamber:

−− Better bale shape, thanks to several retainers in the bale

chamber and the new channel side shape
−− New side retainers for higher density
−− 152 in (3.85 m) chamber in the QUADRANT 5300 and
136 in (3.45 m) chamber in the QUADRANT 3300
−− Reliable tying with less bale expansion through the open
side panels of the bale chamber

The new chamber concept for high density.

The new, strengthened octagon on the QUADRANT 5300,

means increased bale density. The new baling ram design
makes for even sharper-cornered bales. With the side
retainers, the new upper pressure plate and the new side
panels, all bales reach their maximum density level, with
uniform length and bale expansion on the same side, resulting
in more reliable tying on ejection.

In short, the QUADRANT 5300 and 3300 machines produce

uniformly high-density bales with optimum density.

QUADRANT 5300 3300

Bale chamber length in (m) 152 (3.85) 136 (3.45)

Bale chamber width m 1.2 1.2
Bale chamber height m 0.9 0.7

31
Introducing the perfect knot.

The knotter bill hook.

Almost legendary: the knotter bill hook was the first CLAAS
product to be patented, back in 1921, and more than a million
have been produced since then. Constant improvements have
been made to the knotter over the years as baling pressures
have continued to increase and customers demand more
secure knots. Knotting reliability is guaranteed, no matter what
the conditions or the type of twine.

32
Tying

33
We're totally committed to our work – and, of
course, to you.

The benefits at a glance.

−− Quick, precise, reliable: the CLAAS knotter

−− Safe and secure: strong loop knot without twine residue
−− Economical, strong and wear-resistant: the CLAAS baling twine

34
 CLAAS knotter

The CLAAS knotter. generation. The hydraulically driven TURBO FAN system with
its active airflow protects the knotter from dust and dirt, with a
CLAAS balers just would not be the same without the powerful and constant 87 mph (140 km/h) airflow and air
legendary CLAAS knotter. Today, CLAAS remains the only diffusers.
agricultural machinery manufacturer worldwide to develop and
manufacture its own knotters. The operating principle is direct
drive via universal drive shaft. The result is high speed Tying bales more cost-effectively: CLAAS
operation, razor-sharp precision and total reliability. quality twine.

CLAAS baling twine is specifically designed for CLAAS

The new TURBO FAN cleaning system. knotters. The twine is highly tear-resistant, and at the same
time sufficiently flexible to minimize wear to the knotter. With
The knotter concept with active twine finger, aggressive each new refilling, four twine spools per knotter can be tied
clamping plate and electromechanical twine start enhances together without having to alternate between them, which
tying reliability under all conditions. The direct drive ensures saves time. The result is an intelligent balance of high knot
constant synchronization between the baling ram and strength and cost-effective run length. The large twine box
needles. Synchronization prevents the needles from colliding stores up to 700 bales worth (24 x 11.5 kg) in one twine load.
with the pistons. On the QUADRANT 5300 and 3300, with its And when night starts to draw in, bright work lights placed by
bale heights of 35.5 in (90 cm), the needles are arranged the twine guides and knotters keep everything well lit.
eccentrically. This means there is more time for the most
important part of the process – tying the knot.

Another advantage: the knotters do not produce dangerous

twine remnants that can cause animal fatalities during feeding
or leave residue when the material is used for power

QUADRANT 5300 3300

Knotter type CLAAS HD II single knotter CLAAS single knotter

Number of knotters 6 6
TURBO FAN knotter cleaning system With air diffuser With air diffuser
Twine box capacity 24 x 11.5 kg 24 x 11.5 kg

35
NEW

QUADRANT 5300: CLAAS HD II knotter

Bound to succeed.

3
4 5
2
1

The benefits at a glance.

−− Hard-wearing: knotter technology from CLAAS

−− Enhanced functions: e.g. eccentric needle control on the QUADRANT 5300 and 3300
−− Ready for the task whatever the conditions: the optimized knotter bill hook
−− NEW: Total tying reliability day-in, day-out with knotter monitoring

36
 CLAAS knotting technology

Long service life for knotter technology.

The knotter bill hook, twine retainer wheel and retainer plate
have undergone a heating process during their manufacture
to ensure maximum wear resistance and long service life.

The new functions at a glance.

7

 1 Larger opening in the knotter bill hook creates more

insertion space and more reliable threading of the twine
 2 Tapered and therefore more wear-resistant knotter tongue
redesigned for easier knot execution The improved knotter bill hook.
 3 New twine retainer plate and twine retainer wheel to
secure the twine firmly during the tying process, for even The knotter bill hook has been significantly further enhanced in
higher bale density the new QUADRANT 5300, with stronger material and
 4 New cam section for improved twine guidance reworked geometry. This ensures operational reliability for all
 5 New twine retainer plate can handle thicker tying material types of twine, in all operating conditions.
 6 New twine guide path design for easier twine insertion
 7 Closed twine applicator for reliable guidance
 8 Error-free insertion of the twine into the knotter, thanks to NEW: Knotter monitoring system (optional).
the wider angle between the knotter hook and twine
retainer wheel (7.6°) – this means longer twine ends, and The automatic baling pressure control ensures total tying
hence a better knot reliability. There are sensors on the knotter to monitor the
 9 Swiveling knotter with quick-release mounting for ease of twine tension, and sensors on the front frame to measure the
maintenance bending forces. The system adjusts the baling pressure
automatically according to the load. That means you can
operate the baler right up to the limit, without the twine
breaking. But if a breakage does occur, this is displayed by
the knotter monitoring system. The knotter sensors also
detect when a fresh supply of twine is needed, and a
message is displayed on the terminal.

QUADRANT 5300 3300

NEW: The new CLAAS HD II knotter l –

NEW: Automatic baling pressure control l –
1921 2016 NEW: Knotter monitoring system m –

The general concept of single knotting has not changed since 1921, but
continual improvements have been made to better meet our customers' needs l Standard m Optional – Not available

37
NEW

Need to watch your weight? No problem!

The benefits at a glance.

−− NEW: Bale weighing system available for QUADRANT 5300 models

−− All important data, e.g. weight, can be accessed via task management
−− Improve operating times, support the operator, optimize costs– all with remote access

38
 Bale weighing system

NEW: Integrated bale weighing system.

A long baling channel, high ram frequency and automatic

baling pressure control ensure high compression on the
QUADRANT 5300 under all conditions. You can now also
easily set the weight for your finished bales: four sensors
measure the weight with a high level of precision right on the
bale ramp. This gives contractors and farm owners alike an
overview of how many tons of bales have been produced for a
particular area. It also means that, where required, they can
invoice fairly based on the number of tons, in a way that is
transparent for both parties.

QUADRANT 5300 3300

Bale weighing system m –

l Standard m Optional – Not available

39
Right up close with nature – sometimes even at
the press of a button.

1 2

Operation.

Even those who love their work want to finish up at some

point. That's why, every day, we do our best to support you in
your daily work, with good ideas, robust equipment and
innovative technology. User-friendly, convenient operation is
always our number one focus.

40
 Machine operation

1 / COMMUNICATOR II. 2 / EASY on board.

The COMMUNICATOR II has a 5.7" color display. It conforms With the new EASY on board app, all ISOBUS-compatible
to the ISO UT standard, allowing convenient control of implements can be controlled from an iPad® (iOS 8® or later).
ISOBUS-compatible implements from the COMMUNICATOR For even greater convenience, various functions can be
II. Naturally, functions can also be assigned to the Function assigned to the Function keys (auxiliaries) as with any other
buttons (auxiliaries). ISOBUS terminal. The convenience of tablet-based operation
is matched by its reliability. The USB interface provided acts
as a fast and secure power supply for the tablet over long
periods in the field. With tablet operation, the cab becomes
much less cluttered.

COMMUNICATOR II EASY on board

The terminal
ISO UT o o
USB stick o –
TONI-enabled (for use with CLAAS Tractors) o o
Y cables o –
Printer-compatible o o
Touchscreen – o
Color screen o o
Settings
8 default settings (straw, hay, etc.) o o
Bale length o o
Baling pressure o o
Lubrication interval o o
Knife position o o
Automatic baling pressure control o o
Hydraulic pre-chamber o o
PFS speed o o
Twine quality o o
Knife cleaning cycle o o
Information in the task menu
Bale length o o
Baling pressure o o
Packet size o o
Left/right indicator o o
Knife position o o
Number of bales o o
Piston strokes/min o o
Automatic baling pressure control o o
Hydraulic pre-chamber o o
Humidity sensor o o
Weighing data o o
Bale deposit sensor o o
Bale weighing system o o
Customer menu
20 customer orders o o

o Available – Not available

41
When it comes to maintenance, less is more.

The benefits at a glance.

−− Large tires mean minimal ground pressure and smooth running

−− Automatic lubrication, including the steered tandem axle, means less maintenance
−− LED service lighting with 11 LEDs for optimal visibility

42
 Tires and maintenance

Axles and tires. −− In the QUADRANT 5300 and 3300, all key lubrication points
have automatic continuous central grease lubrication as
Various axles are available for the QUADRANT with a selection standard.
of large tires for minimal ground pressure, optimal turf −− Drives and overload clutches operate in an oil bath
protection and excellent smooth running. Both variants −− The hydraulically controlled packer tines are entirely
provide a massive footprint to minimize damaging ground maintenance-free
pressure, even on very light or wet soil. −− The drive has only a minimal number of moving parts

Exclusive to CLAAS: the steered tandem axle is also

Reduced maintenance outlay, central maintained via the central lubrication. With so little time
lubrication. wasted on maintenance on the QUADRANT, you can spend
more time out in the field and the convenient service lighting
In principle, we could skip the topic of maintenance because it turns night into day. There are five LED lights for driving, with
simply isn't an issue for QUADRANT owners. In the another four that can be switched on for maintenance
QUADRANT 5300 and 3300, everything is designed either to operations.
be easy to maintain or to require no maintenance at all.

QUADRANT 5300 FC 5300 RC 5300 RF 3300 FC 3300 RC 3300 RF

Single axle 710/40 R 22.5 – o o – o o

Steered tandem axle 500/55 R 20 o o o o o o
Steered tandem axle 620/50 R 22.5 o o o o o o

o Available – Not available

43
Whatever it takes –
CLAAS Service & Parts.

Your needs matter. Always up to date.

You can always rely on us: we'll be there whenever you need CLAAS dealer service teams are trained by CLAAS and
us – everywhere, quickly and reliably, around the clock if equipped with the all-important special tools and diagnostic
necessary, with precisely the solution that your machine or systems to meets all your expectations with regard to
business requires. expertise and reliability.

Problem solving by remote diagnostics:

Reliability can be planned. CLAAS TELEMATICS.

With our service products, you can increase your machine CLAAS TELEMATICS on your machine brings two important
reliability, minimize your risk of breakdowns, and budget with advantages: fast assistance from CLAAS service technicians
confidence. CLAAS MAXI CARE offers planned reliability for and a more profitable operation, thanks to wireless
your machine. networking. We can be there, on the spot, to solve your
problem – even when you can’t see us.

ON YOUR FARM PARTS.

CLAAS CLAAS ON YOUR FARM PARTS allows you to customize a

On Your
selection of parts on your farm in order to get you back up
and running in minimal time. Buy now – pay after the harvest

Farm Parts – it’s that simple. Ask your participating dealer for details.

44
 CLAAS Service & Parts

ORIGINAL parts and accessories. Worldwide coverage from Columbus, Regina,

and Hamm.
Specially matched to your machine: precision-manufactured
parts, high-quality consumables and useful accessories. We The CLAAS of America Parts Logistics Centers in Columbus,
will supply exactly the right solution from our comprehensive Indiana and Regina, Saskatchewan, provide world-class parts
product range to ensure that your machine is 100% reliable. support throughout North America for all CLAAS products.
Supported by the CLAAS worldwide spare parts depot in
Hamm, Germany, we provide the CLAAS dealer network with
reliable, consistent parts availability and industry leading
responsiveness. Your local CLAAS dealer can supply the right
parts solution for your business to maximize machine uptime.

The CLAAS Parts Logistics Center in Columbus, Indiana, stocks more than The CLAAS Parts Logistics Center in Regina Saskatchewan, stocks more than
36,000 part numbers in a warehouse area of over 165,000 sq ft. 14,000 part numbers in a warehouse area of over 33,000 sq ft.

45
QUADRANT 5300 FC 5300 RC 5300 RF
Hitching
PTO shaft speed rpm 1000 1000 1000
Hydraulic jack l l l
Ball hitch m m m
Hydraulic connection 2 single-acting and 1 open return line 2 single-acting and 1 open return line 2 single-acting and 1 open return line
Load sensing m m m
Pick-up
Width in (m) 92.5 (2.35) 92.5 (2.35) 92.5 (2.35)
DIN rake width in (m) 85 (2.15) 85 (2.15) 85 (2.15)
Number of tine bars 4 4 4
Oscillating pick-up caster guide wheels l l l
POWER FEEDING SYSTEM (PFS) l l l
Hydraulically driven PFS m m m
Crop feed
Rotor FINE CUT ROTO CUT ROTO FEED
Number of knives 51 25 –
Blanked-off knives l l –
Blade group changing 51, 26, 13, 12, 0 or 25, 13, 12, 6, 0 –
51, 26, 25, 13, 0
Knife drawer l l –
Adjustable hydraulic pre-chamber l l l
Bale chamber
Ram strokes rpm 46 46 46
Max. baling pressure psi (bar) 2900 (200) 2900 (200) 2900 (200)
Automatic baling pressure control l l l
Bale ejector l l l
Bale deposit sensor m m m
Moisture sensor m m m
Bale chamber dimensions
Length in (m) 152 (3.85) 152 (3.85) 152 (3.85)
Width in (m) 47 (1.2) 47 (1.2) 47 (1.2)
Height in (m) 35 (0.9) 35 (0.9) 35 (0.9)
Bale length in (m) 20 - 118 (0.5 – 3.0) 20 - 118 (0.5 – 3.0) 20 - 118 (0.5 – 3.0)
Operation
CLAAS COMMUNICATOR II l l l
ISOBUS cable m m m
EASY on board m m m
Automatic central lubrication l l l
LED service and work lights m m m
Bale weighing system m m m
Wrapping and tying
Knotter typ CLAAS HD II CLAAS HD II CLAAS HD II
Number of knotters 6 6 6
Knotter monitoring m m m
Twine storage 24 x 25 lb (11.5 kg) 24 x 25 lb (11.5 kg) 24 x 25 lb (11.5 kg)
TURBO FAN knotter cleaning system with air diffuser m m m
Bale drop onto field
Hydraulically folding bale chute l l l
Hydraulically folding roller bale chute m m m
Dimensions and weights
Width ft (m) 9'1" - 9'10" (2.78 – 2.99) 9'1" - 9'10" (2.78 – 2.99) 9'1" - 9'10" (2.78 – 2.99)
Height ft (m) 11' - 11'8" (3.37 – 3.56) 11' - 11'8" (3.37 – 3.56) 11' - 11'8" (3.37 – 3.56)
Transport length ft (m) 30' (8.86) 30' (8.86) 30' (8.86)
Working length ft (m) 32'4" (9.86) 32'4" (9.86) 32'4" (9.86)
Weight (tandem axle) lb (kg) 26,985 (12,240) 26,720 (12,120) 23,810 (10,800)

l Standard m Optional – Not available

46
 Specifications

3300 FC 3300 RC 3300 RF

1000 1000 1000

l l l
m m m
2 single-acting and 1 open return line 2 single-acting and 1 open return line 2 single-acting and 1 open return line
m m –

92.5 (2.35) 92.5 (2.35) 92.5 (2.35)

85 (2.15) 85 (2.15) 85 (2.15)
4 4 4
l l l
m l l
m m m

FINE CUT ROTO CUT ROTO FEED

51 25 –
l l –
51, 26, 13, 12, 0 25, 13, 6, 0 –

– l –
l l l

46 46 46
2900 (200) 2900 (200) 2900 (200)
– – –
l l l
m m m
m m m

135 (3.45) 135 (3.45) 135 (3.45)

47 (1.2) 47 (1.2) 47 (1.2)
35 (0.9) 35 (0.9) 35 (0.9)
20 - 118 (0.5 – 3.0) 20 - 118 (0.5 – 3.0) 20 - 118 (0.5 – 3.0)

l l l
– – –
m m m
l l l
– – –
m m m

CLAAS Standard CLAAS Standard CLAAS Standard

6 6 6
– – –
24 x 25 lb (11.5 kg) 24 x 25 lb (11.5 kg) 24 x 25 lb (11.5 kg)
m m m

l l l
m m m

9' - 9'9" (2.76 – 2.97) 9' - 9'9" (2.76 – 2.97) 9' - 9'9" (2.76 – 2.97)
11' - 11'3" (3.37 – 3.42) 11' - 11'3" (3.37 – 3.42) 11' - 11'3" (3.37 – 3.42)
26'7" (8.1) 26'7" (8.1) 26'7" (8.1)
30'7" (9.32) 30'7" (9.32) 30'7" (9.32)
24,950 (10,940) 23,950 (10,860) 23,950 (10,860)

CLAAS continually develops its products to meet customer needs. This means that all products are subject to change without notice. All descriptions and specifications in this brochure should be
considered approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for worldwide use. Please refer to your nearest CLAAS dealer and
their price list for local specification details. Some protective panels may have been removed for photographic purposes in order to present the function clearly. To avoid any risk of danger, never
remove these protective panels yourself. In this respect, please refer to the relevant instructions in the operator’s manual.

47
Ensuring a better harvest.

CLAAS of America Inc.

8401 S 132nd Street
Omaha, NE 68138
Phone +1 (402) 861-1000
Fax +1 (402) 861-1003
www.claas.com

CL99881031 / 02/2018