Scribd
Upload
309 views4 pages

Epsimed Infusion Pump Znb-Xaii: Hospital Equipment

The document describes the Epsimed Infusion Pump ZNB-XAII. It is a high-quality peristaltic pump that uses mechanical pressure to precisely deliver fluids to patients at rates as low as 0.1 ml/hr. It monitors for issues like occlusions in real-time using an ultrasonic detector. The pump is portable and battery powered for up to 5 hours, or can run on AC power. It has alarms, adjustable settings, and an optional drop sensor or wireless management.

Uploaded by

Muhammad usman khalid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
309 views4 pages

Epsimed Infusion Pump Znb-Xaii: Hospital Equipment

The document describes the Epsimed Infusion Pump ZNB-XAII. It is a high-quality peristaltic pump that uses mechanical pressure to precisely deliver fluids to patients at rates as low as 0.1 ml/hr. It monitors for issues like occlusions in real-time using an ultrasonic detector. The pump is portable and battery powered for up to 5 hours, or can run on AC power. It has alarms, adjustable settings, and an optional drop sensor or wireless management.

Uploaded by

Muhammad usman khalid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Hospital Equipment

www.epsimed.com

EPSIMED LLC
12930 SW 128TH ST #102, Miami, FL 33186 USA
[email protected]
Phone +1 786 429 1827
Epsimed Infusion
Mobile +1 786 238 5965
Pump ZNB-XAII
Peristaltic Pump
High Accuracy Infusion Pump

Epsimed Infusion Pump


Epsimed infusion
Pump
The Epsimed infusion pump through
mechanical pressure move fluids through
flexible tubing into the patient's vascular
system, helping to deliver precise doses of
The Epsimed infusion pump is a fluids.
high-quality medical equipment
that works with a curvilene Compared to gravity systems that use a
peristaltic mechanism, which regulating clamp, the Epsimed infusion

Compatible with IV
together with the built-in ultrasonic pump allows greater accuracy in the drip
detector, allows in real time: to know rate, controlled through an ultrasonic
with high precision the volume system.

sets of any standard


administered to the patient. The
status of alarms, such as: occlusion,
air in the linem low battery,
malfunction system , among others.
1) Pump handle.

2) Pole Clamp

3) Nurse Call Connector


Note : Can be connected to nurse call
using the alarm terminal cord.
4) Drop Sensor Connector
Note: Connect to the drop sensor
only

5) DC power inlet

6) Communicate port:
Note: For vendor use, or connect to
medical equiments assigned
by vendor

7) Power switch: turn to switch on /off


AC and battery

8) AC power inlet

9) Ground: Equipotential point

10) Battery cover, Hex screwdriver


needed to open it

Characteristics Technical Features


KVO Rate: 0.1-5 ml/h (in 0.1 ml/h increments)
The oclusion pressure to be
shown in real time. Alarms: Occlusion, air-in-line, door open, end program,
It has Nurse Call low battery, end battery, AC power off, motor malfunction,
The user can set up the night mode system malfunction, reminder alarm
for more confortability
At the Epsimed Infusion pump, the user Occlusion Sensitivity: High, medium, low.
can set up the power saving mode. History Log: 50000 events.
Air-in-line Detection: Ultrasonic detector.
Wireless management: Optional.
The battery volumen is on display Drop Sensor: Optional.
Vehicle Power (Ambulance): 12±1.2 V.
Battery life time at a volume of 25 milliliters Power Supply, AC: 110/230 V (optional), 50-60 Hz, 20 VA.
Battery: 9.6±1.6 V, rechargeable.
per hour It is approximately 5 hours. Battery Life: 5 hours at 25 ml/h.
The heating temperature can be Working Temperature: 10-30 degrees.
shown in real time Relative Humidity: 30-75%.
Atmospheric Pressure: 860-1060 hpa.
Size: 130*145*228 mm.
Weight: 2.5 kg
Additional
Features
Model: Infusion Pump.
Pumping Mechanism: Curvilinear peristaltic.

IV Set Compatible with IV: sets of any


standard.

Flow Rate: 0.1-1500 ml/h (in 0.1 ml/h


increments).

Standard
Purge, Bolus: • 100-1500 ml/h (in 0.1 m/h
increments). • Purge when pump stops. •
Bolus when pump starts.

Accessories
Accuracy: ±3%.

VTBI: 1-20000 ml (in 0.1 ml increments).


Infusion Mode: ml/h, drop/min, time-based,
body weight, nutrition.

Additional Features: Real-time infused


volume, automatic power switching, mute
key, purge, bolus, system memory, history
log, drug library, key locker, rotary knob,
change flow rate without stopping the
pump.

High accuracy
and reliability

A B
One power User Manual
cable

You might also like